WILL IT WORK?
HTML-код
- Опубликовано: 6 июн 2024
- #dadsrchangar #rc #frsky #ethos #itff #spektrum #IRX4
Are you curious if it will work? If you're a FrSky enthusiast with other receivers, and you're looking to be Eco-friendly by using what you already have, then this could be the solution for you. Why not join our community, where we're all exploring the potential of the IRX4 Lite together.
✈ WHY NOT BECOME A DRCH MEMBER TODAY...
/ dadsrchangar
Have a great weekend, Stay Safe, Keep Safe, and most of all, Have Fun...
✈ Please take a moment to Like, Subscribe and hit the bell to get notified.
**IRX4 Downloads ***
github.com/benlye/flash-multi...
**Impulse RC Downloads ***
impulserc.com/pages/downloads
** Social ***
✈ Forum and website:
www.dadsrchangar.co.uk
✈ Shop one:
teamwear.nxt-sports.com/shop/...
✈ Shop Two:
teespring.com/en-GB/stores/da...
✈ Facebook:
/ posts
✈ Instagram:
dads_rc_han...
** INFO ***
The IRX4 is a Multiprotocol Module (MPM) designed for use with FrSky X-Lite radios and other radios with a X-Lite style module bay.
If you have been in this hobby for a while, you will likely have amassed quite a collection of RC models and not necessarily all of them bound to the same radio control, so probably a collection of radios too. That’s where this multiprotocol TX module will come in handy. It incorporates four RF chips into one transmitter module and supports pretty much all of the communication protocols used in the RC hobby so that you can control everything from a single radio. It supports pretty much all of the communication protocols used in the RC hobby, enabling it to control aircraft with Spektrum, FrSky, Flysky, Futaba, Hubsan, Syma, Bayang and many more other types of receivers. This module will also be useful to FrSky users that require support for D8 - latest FrSky ACCESS radios have removed support for the D8 protocol, this module can be used with ACESS radios and brings back compatibility with D8.
The Module features a STEM32 microcontroller (MCU), which has enough on-board storage space to store all of the protocols you need without having to re-flash it. Should you need to update it, it has an active Bootloader so can be re-flashed via USB. This module is compatible with the Multi-module project on github. All available protocols are included in serial mode. In this mode, it uses a serial protocol to communicate with your transmitter. The serial protocol does not require any hardware modifications, but you should update the firmware on your transmitter to the latest. Then the model protocol selection and binding is done from the Model Settings menu on your transmitter. For telemetry capable transmitters, the telemetry integration is done seamlessly with the transmitter firmware.
#dadsrchangar #rc #frsky #ethos #itff #spektrum #IRX4 
Хобби
![J.P., NLE Choppa - Bad Bitty (Remix) [Official Music Video]](http://i.ytimg.com/vi/rBDa6BCvw10/mqdefault.jpg)
Chris glad you're getting it sorted!
My little old hands no good for the NX7e, so it’s good I can still use the receivers with safe etc. Hope you have a great week ahead buddy. 🫡
Some great tips Chris 😀👍
Thanks Ian, you use Spektrum anyway, but you never know, you may come to the dark side 😁. Have a great week ahead. 🫡
Chris that looks pretty straight forward. TAER Jeff in LA USA
Hi Jeff, hi I just need to change the outputs on the radio, will be interesting to see if I can still control the SAFE option. Have a great week buddy. 🫡
@@DadsRCHangar Chris you should be able to setup safe, others have done it.
I'm playing with all this stuff at the moment, the Spektrum order is TAER, it drives me crazy but you seem to have a handle on it.
Crazy people change stuff, it’s all good, I just changed the outputs on the radio when I set up a new model. I want to bind to my other one and see if SAFE works as well. Should be fun 😁. Have a great week ahead 🫡
WhoooHooo! ... back in the hanger baby yeah! What would think about building a tiny scale (20" max) RC piper cub? I's love to
watch you build something like that.🤔
Well I have a few builds in the Hangar including the Lysander which is huge. Why would you like to see a Piper Cub?
@@DadsRCHangar My interests are purely selfish in that I’m looking to build a miniature scale RC aircraft. Sub 250 for worry free park flying.
@wearemany73 I see, I will have to see if I can find one then 😁
@@DadsRCHangar Keep it stored in the memory banks until you need a new project. Thx Chris 👍😎
Just here to feed the algo.
Always thankful Joliie 😊. Have a great week ahead. 👍🏻
sometimes you can be too close to the receiver for binding most radios say you should separate radio from receiver by at least a meter
I normally do have them apart, this is all good thou, just need to change the outputs on the radio to match the receiver. Hope you have a great week ahead. 🫡
interesting but i have a NX10 Wich has BNF Pre programmed in the NX10 for example Blade 65 models E flite 163 BNF models and FMS Hangar 9 HobbyZone misc. park zone and Seagull models but i do like your radio
Personally my hands are small for the NX7e I brought. I brought the NX7e to see if I would like the Spektrum way.
I had some other people who come back to the hobby with a lot of old receivers but wanted the x20s, so it’s good for them. I want to see if it binds with my night Vapor 😊.
Ok i think with spectrum they try to keep to them selves so you can't bind with others
Hi Chris so your aware the older Spectrum RX's are DSM2 and the newer ones are on the DSMX platform 👍 you going to Weston Park next weekend ?
Well I do know now 😃. It’s 50/50 at the moment for Weston, we are finishing a project in Coventry, so might come down the wire of the weekend. Will defiantly go next year thou, will book some hotel way in advance, but if I can get there for the day it would be cool. Have a great week ahead 🫡
Spektrum has weird channel assignments. I have the same setup and had to install a lua script to get it to work . I found the binding process easier and more reliable using DSMX-2F. If I used any of the other DSM protocols, only half my channels would work. How does a receiver only see aileron and elevator but not throttle and rudder 🤔🤷♂.
Heya Chris, did get it all to work, just in the wrong order from the radio, but it was just a matter of changing the outputs on the radio. Will be fun to see if the SAFE option works on my other Spektrum Receiver. Hope you have a great week ahead buddy. 🫡
Yes but why? When I buy a bnf, I simply sell the receiver and buy a frsky receiver
Well I wanted to see what all the buff was about Spektrum, so I brought the NX7E, but it dose not feel good in my hands, I have small hobbit hands as people say 😂, so the radio is for someone with larger hands.
So I have two spektrum receivers and other people have come back to the hobby and use the X20S, they asked if it works and it does 😎. Have a great week ahead.
Hi Chris, are you doing any flight demos at Weston Park?
I would need my B cert to do anything at shows, would be fun thou. Mind you I could do a demo on how to crash 😂. You never know what the future holds, but it would be fun to fly at Weston. It’s 50/50 if I can go at the moment, but if I do I will post on my Facebook DRCH page.
Hope you have a great week ahead. 🫡
@DadsRCHangar hope to see you there. I thought that you had done you B Cert?
Come on, pull your finger out.
@@lordlardofframs Not even done my A yet 😂. I need the planets to align. 😊
Chris, thank you for this video. Looks like this will be my solution to use my old Spektrum DSM2 receivers. Only question for me now is: can I do the LUA Update and flashing it to the module with my MacMini m2? Would be a pitty if I had to buy a PC for this procedure. Also your attempts to update required multiple attemps and was a bit fast for me. I'm not familiar with drivers etc. Could you eventually publish a checklist how to do it step by step?
Also I can't find this multimode module on the german FrSky distributers webpage. Do you have a link where you got yours? Does this module also work in the LBT mode, which is the European requirement?
Winnie
You can use Mac, it’s on the same download page. You should be able to use the video as that’s basically all you need to do. As the LUA scripts, you would add them to your radio after. I can make a video about that. As the Multimode module, this is not sold by FrSky. I found one shop in Germany, link below.
www.rc-terminal.de/IRangeX-IRX4-LITE-24GHz-Multiprotokoll-Modul-fuer-Taranis-X-LITE-4-IN-1-TX-Module
If you search for iRangeX IRX4 you may find more shops. Let me know if the Video does not help and I see if I can make a post on my Facebook DRCH page. Have a great week 🫡
Hi Chris, I just received my IRX4 Lite. Took 16 days at Banggood, including a good price of less than 40€. That's more than half the price at any other vendor in Europe.
Now comes the hard part for me, as I'm innocent as a virgin when it comes to flashing (probably updating) the software with my Mac (Sonoma 14.5). Do you know a detailed step-by-step guide for dummies that I can use to complete the challenge? The instructions on GitHub are completely cryptic to me (terminal, script, homebrew, etc.).
I would appreciate your help or anyone else's to update the module. Thank you very much.
@@DadsRCHangar Found one at Banggood at a good price. I read through the Github instructions how to flash the module via Mac. That is extreme cryptic to me. Do you have a point by point checklist how to do that on a Mac, or do you - or anybody else - know of a video that provides in depth guidance?
@@wkochxnttjtn4781 I can possibly do it on my Mac, should be the same process. I will give it a go over the weekend. 👍🏻
@@DadsRCHangar That would be more than of great help! Enjoy your weekend.