Tenho um BG 2024 e já estava quase o descartando, pois o mesmo não recarregava mais e nem ligava. Após esse vídeo, consegui fazer a desmontagem do aparelho. Comprei duas pilhas panasonic eneloop AAA e levei para um tecnico fazer a solda das baterias. Após a remontagem, deixei no carregador por 1 minuto e em seguida liguei, o aparelho voltou a funcionar normalmente.
This was a very helpful tutorial. Thank you! I ran into some issues partly due to not being as skilled at using a solder gun as I thought. I was able to solder the batteries though with only small damage to one of the batteries (some of the plastic at the top the battery melted). It works and charges now! I hope the damaged part will not cause any interruptions in the future. I love the groomer and I'd hate to throw it away in perfect condition just because the batteries died.
This tip will save you the trouble of dissasembling and save you some moolah! If you simply just charge the groomer for just 5-10 minutes only this normaly resets the faulty batteries so you can use it for at least 15 minutes but try not to turn it off inbetween....otherwise it will red light and power down. However sometimes you might find that it can be turned off and on at least 3 or 4 times! Either way as long as you only charge the groomer for 5-10 minutes each time you want to use it you should be good to go.
BRAVO Anton, you just save me (and many other here) from to spend 50 euro to take a new one. Your video is the ONLY ONE in you tube, so good and explained filmed. Thank you for your help ! You are the best!
Thats exactly what I was searching for on RUclips, my Bodygroom BG2026 battery is pretty much dead and I want to replace it. Thank you so much! Everyday hero!
Thank you so much for your video! The battery replacement was a piece of cake with your video! A side note: the screws, at least with my model 2026 were Torx size 8.
Your video helped me a lot. I dismantled the trimmer with your help. Took help of technician in replacing the battery with a AAA duracell rechargeable battery. It got fixed. Thanks again.
@@shehzad555 I gave up. I managed to do the welding with two rechargeable batteries, but shortly afterwards it stopped working. I ended up buying another new device
After soldering the new batteries, the bodygroom did not work. Only the LED startet blinking after pressing ON Button. There is a simple trick: the bodygroom stores the batterie emty state and inhibits switching on the machine again. 20 seconds in the charging unit and the state "batterie empty" is erased and the bodygroom works again.
mine ran into a battery issue i think, it will charge but when i turn it on it will just flash red like theres no charge. are those batteries easily removable and place or are they soldered????
Thanks for a nice video. Philips batteries were complete crap. Changed the batteries to Eneloop AAA. Working fine now. I hope the batteries did not lose capacity because of the heat during soldering.
thank you so much, my bg2028 was stop working , i thout it was gone. But after watching your videos i succeded to disamble my bg2028 then, bingo, problem was about the button, it was stucked. then it returned to normal, you save my money. by the way i didnt have the turnscrew like yours, i manged to open with sting. :)
En mi caso las baterías estaban bien 2.8 V pero no quería funcionar. Las baterías son normales AAA pero vienen soldadas. Solución: he quitado la placa y le he puesto una pila 18650 pero tengo que gastarla un poco, porque cargada son 4.2 V
I soldered my new batteries but something went wrong and the integrated M801 got burnt. With a close look I discovered one leg was burnt. And I had to remove the batteries because I couldn't turn it off. What was wrong soldering new batteries?
@@minhardt do you by any chance how to replace the SMD soldered on M805 location, talking about the BG2024/15? I only could see the number beguining 28... stamped on it (seen with a magnification app from my phone). thanks a lot anyway!!!
Achei trabalhoso para desmontar, porém creio que as pilhas sejam substituíveis sim e sejam encontradas em qualquer casa de eletrônica.O meu nao esta segurando a carga também
First of all thank you.... the tutorial was EXTREMELY helpful ! However, I wanted to open it because the batteries had lost their juice. Once I saw for myself that this implied soldering and trying to find out the right battery (as the model number for mine weren't even printed)... I'm just going to pass and buy a new one! Besides, I've had mine since 2015 and Black Friday is around the corner!
![How to replace the Philips Bodygroom TT2040 Battery [ Series 7000 ]](http://i.ytimg.com/vi/h7_UTAi1wxQ/mqdefault.jpg)
This bodygroom was made for almost nobody coul disassemble and need to buy another one, thanks for the video
Nope
Tenho um BG 2024 e já estava quase o descartando, pois o mesmo não recarregava mais e nem ligava. Após esse vídeo, consegui fazer a desmontagem do aparelho. Comprei duas pilhas panasonic eneloop AAA e levei para um tecnico fazer a solda das baterias. Após a remontagem, deixei no carregador por 1 minuto e em seguida liguei, o aparelho voltou a funcionar normalmente.
Top, amigo. Tenho um também amigo. Qual valor que gastou nessas pilhas?
Muito boa a dica amigo, vi que a pilha tem a 950mAH, quanto tempo de autonomia você obteve com estas pilhas?
This was a very helpful tutorial. Thank you! I ran into some issues partly due to not being as skilled at using a solder gun as I thought. I was able to solder the batteries though with only small damage to one of the batteries (some of the plastic at the top the battery melted). It works and charges now! I hope the damaged part will not cause any interruptions in the future. I love the groomer and I'd hate to throw it away in perfect condition just because the batteries died.
What batteries u use? U remember?
Спасибо большое. По этому видео подобрал батарейку и произвел замену. Не поломал ни одного крепежа!!!!
This tip will save you the trouble of dissasembling and save you some moolah! If you simply just charge the groomer for just 5-10 minutes only this normaly resets the faulty batteries so you can use it for at least 15 minutes but try not to turn it off inbetween....otherwise it will red light and power down. However sometimes you might find that it can be turned off and on at least 3 or 4 times! Either way as long as you only charge the groomer for 5-10 minutes each time you want to use it you should be good to go.
I have been able to do this for about 2 years so far
A big thank you . I have successfully disassembled mine. Upnext is battery replacement. I will leave that to the technician then do the reassembly
BRAVO Anton, you just save me (and many other here) from to spend 50 euro to take a new one.
Your video is the ONLY ONE in you tube, so good and explained filmed.
Thank you for your help !
You are the best!
How did you change the battery? Did you buy regular AAA batteries?
Thats exactly what I was searching for on RUclips, my Bodygroom BG2026 battery is pretty much dead and I want to replace it. Thank you so much! Everyday hero!
Sem um vídeo desses, como conseguiríamos desmontar o aparelho para reparos???
Muito obrigado! Thanks from Brazil.
Qual o tipo de bateria dele? Seriam as baterias 18650? Não pude ver direito.
Good job!!! Thanks from Brazil!!!
Durch dieses Video konnte ich mir den Neukauf ersparen und habe damit nicht nur Geld gespart sondern auch eine Menge Ressourcen und Müll.
Vielen Dank
Thank you so much for your video! The battery replacement was a piece of cake with your video! A side note: the screws, at least with my model 2026 were Torx size 8.
What Kind of replacement do you buy?
Your video helped me a lot. I dismantled the trimmer with your help. Took help of technician in replacing the battery with a AAA duracell rechargeable battery. It got fixed. Thanks again.
How do you do this replacement??
@@rodrigoms1989did you manage to find out how?
@@shehzad555 I gave up. I managed to do the welding with two rechargeable batteries, but shortly afterwards it stopped working. I ended up buying another new device
Gorąco dziękuję za ten materiał filmowy, golarka naprawiona a dokładnie akumulatorki wymienione. Wszystko działa. Pozdrawiam.
Man, get a Philips screwdriver and a plastic spudger! Thanks anyway for showing this
Спасибо тебе друг , благодаря твоему видео я не разломал свой триммер пока набирал ))
After soldering the new batteries, the bodygroom did not work. Only the LED startet blinking after pressing ON Button. There is a simple trick: the bodygroom stores the batterie emty state and inhibits switching on the machine again. 20 seconds in the charging unit and the state "batterie empty" is erased and the bodygroom works again.
Can you, please, tell which batteries did you use as replacement?
Any rechargeable AAA NiMH 750 mAH 1.2V batteries will work. I used Panasonic eneloop AAA.
You have to use AAA 1.2V 700 mAh or more with soldering plates. Do not use standard without it. Eneloop us best type.
@@henriquerz0 its possible to use 1000 mAH battery?
Thank You, Antton!! Your video will help me, a lot!! One day, need to change my batteries. Good work!!
mine ran into a battery issue i think, it will charge but when i turn it on it will just flash red like theres no charge. are those batteries easily removable and place or are they soldered????
Thanks for a nice video. Philips batteries were complete crap. Changed the batteries to Eneloop AAA. Working fine now. I hope the batteries did not lose capacity because of the heat during soldering.
I have the same issue, how did the new batteries perform?
Thank you! Now I can put new batteries
Can the batteries be removed by hand or a soldering gun is required? Thanks for the video. Please respond.
It's not possible by hand. Soldering gun is required.
OK, thank you!
Very helpful thanks any links to the batterys would be appreciated
Super j'ai pu démonter la mienne même si c'est pas le même modèle le principe reste le même
A disassembly and cleaning of the head part (foil) would be interesting too! Nowhere to be found on youtube or anywhere else..
Well done...took it all apart without breaking it.😉
thank you so much, my bg2028 was stop working , i thout it was gone. But after watching your videos i succeded to disamble my bg2028 then, bingo, problem was about the button, it was stucked. then it returned to normal, you save my money. by the way i didnt have the turnscrew like yours, i manged to open with sting. :)
Ahora mi pregunta sería, como se le cambian las baterías?
En mi caso las baterías estaban bien 2.8 V pero no quería funcionar. Las baterías son normales AAA pero vienen soldadas.
Solución: he quitado la placa y le he puesto una pila 18650 pero tengo que gastarla un poco, porque cargada son 4.2 V
Is it important for voltages and amperes or just the size of the battery?
2 batery AAA NiMH 1.2 V 750 mAh
What are the specifications of the battery, how many volts ?
AAA 1.2 V NiMH 750 mAh
Thank you
Brother it will be of great help
Is the water resistance ability affected by disassembling the kit?
Thank you compadre, your video was very useful to me 👌
grazie, è stato utilissimo e sono riuscito a sostituire le batterie morte del mio 2026/32! Grazie
Sapresti dirmi dove potrei trovare le batterie di ricambio?
is the battery soldered?
I am thinking of replacing the internals of this groomer with a simple 18650 powerbank, do you think it will fit inside the internal frame? thanks
no. only 2 pieces of AAA are possible
AAA 2.8 V
18650 4.2 V!!
Genius!!! 👏🏻👏🏻👏🏻👏🏻 Thank you so much
Спасибо! Отличное видео. Аккумуляторы спрятаны, как Кащеева смерть. Без вашего ролика триммер можно только сломать.
А какие купили на замену?
@@oTMoRoZ89 Не помню, но не очень хорошие. Быстро разряжаются. Опять придется заменить...
Здравствуйте. А аккумуляторы просто вставлены или припаяны?
@@АлександрШ-т3е Припаяны. Ведь могли бы сделать съемными в отсеке под легкоснимающейся крышкой.
Да уже разобрал,и припаяны точечно.
Panasonic eneloop AAA with soldering z-plates
Hi bro thanks for this video . But can u please help me. Give me better solution . I do hv the same product and now it's not getting charged
Thx a lot ! My old batteries are dead...
The first move is not necessary and cause damage. Screws also open without removing the cover. Very wrong action at the begging.
Valeu cara me ajudou muito! Parabéns obrigado mesmo
as baterias são soldadas?
ou é literalmente só tirar e colocar novas?
Marcelo Ramos as minhas comprei novas e vou soldar, também estou com essa dúvida
@@viniciusgramacho22 qual pilha você comprou? Se colocou, como fez?
Você pode me ajudar por favor? Que pilha comprou e como colocou?
Conseguiram resolver a substituição das baterias? As minhas morreram
Mine runs automatically after battery change. I can’t turn it off and it also doesn’t charge. Any suggestions what’s wrong?
I soldered my new batteries but something went wrong and the integrated M801 got burnt. With a close look I discovered one leg was burnt. And I had to remove the batteries because I couldn't turn it off. What was wrong soldering new batteries?
No problem with soldering. Maybe it was too high temperature or you produced a shortage.
@@minhardt do you by any chance how to replace the SMD soldered on M805 location, talking about the BG2024/15? I only could see the number beguining 28... stamped on it (seen with a magnification app from my phone). thanks a lot anyway!!!
@@miguelrueda6443 No
O meu aparelho parece estar viciado, eu aperto o botão de ligar e ele fica piscando a luz vermelha. Como faço para trocar as pilhas internas dele?
o meu tambem amigo, sabe como faz que tipod e pilha comprar? é facil retirar as pilhas parece que sçao coladas pelo video.
@@igorvbr795 parceiro conseguiu fazer seu aparelho voltar a funcionar? achou o defeito? comprou outras pilhas, onde?
ninguém arruma, não sei onde levar pra arrumar seria só na autorizada Philips?@@wesleysilva3618
Achei trabalhoso para desmontar, porém creio que as pilhas sejam substituíveis sim e sejam encontradas em qualquer casa de eletrônica.O meu nao esta segurando a carga também
@@andredamian5877 onde mando arrumar? ninguem arruma isso aqui
Very useful. Thank you.
great video, I have battery problems, can you kindly tell me where to buy them? would you give me some links? thank you so much
I bought mine from local store, sorry.
how many volts is each battery? thank you very much again from Italy
1,2 v.
hi there, how often do you need to replace the head due to its wear? thanks
Mine still works fine. I have it from 3 years. Only the battery died.
Anton Stratiev hi do we need to remove the head after using it or should injust clean it like that?
@@pakipashtunmafia6924 mine lasted about 8 years
Deuzulivre! É mais fácil escalar o Himalaia do que retirar a bateria desse aparelho. 😂
whats is the model and size of the battery?
Hi, can you someone tell me what kynd of batterys shood i search, for this model bodygroom ?
И аз това търся, умря и моя.
Any rechargeable AAA NiMH 750 mAH 1.2V batteries will work. I used Panasonic eneloop AAA.
How to remove batteries? I tried to change mine, but they're stuck. Tks.
FreddCorsten they are glued in
Gracias desde España 👍
I used full new batteries and it still flashes red :(
if you like fixing things you should get yourself a good screwdriver
Excellent!! very useful!!!
Gracias desde Madrid
Thank you
Legend 👍
✌️🙏🌷
I upgrade my batteries to 2300mah, The original died
Battery mark that you bought for machine, battery also died too.?
How long will it last to use?
battery is 1.2V?
Nice job !!
Quando fai il video aumenta la luce
So many stupid questions below i am amazed. So thank you. Everything i need to know is in the video and very precise. Кой магазин взе батериите ? :)
Odeio a Philips. Simplesmente fazem coisas descartáveis. Produto novo mas não existe peças de reposição
gracias me valio para desarmar la mia
thanks :)
thanks♥laik!!!
Batteries bad :(
Gracias....30 euros 😄😄😄.....👍
Там чувак в маске дарта вейдера сидит
Дааа. Хрен ее разберёшь еще. Ну в принципе понятно. Она водонепроницаемая . но за видео спасибо ! Весь интернет перерыл . только ваше видео нашел
First of all thank you.... the tutorial was EXTREMELY helpful !
However, I wanted to open it because the batteries had lost their juice.
Once I saw for myself that this implied soldering and trying to find out the right battery (as the model number for mine weren't even printed)... I'm just going to pass and buy a new one!
Besides, I've had mine since 2015 and Black Friday is around the corner!
Thank you
Brother it will be of great help