Thank you for this very impressive tour ! I have been playing guitar semi - professionally since 1968 , and have had many books on guitar construction , but I had yet to see a video showing all the necessary procedures . This is most enjoyable , and again , thank you very much !!!
My Dad made me my first guitar when I was around 14 years old - he was a carpenter by trade although he had never built such a thing before. Watching this, I now realize, what incredible skills my Dad must have possessed and it's taken this video, 60 years later to realize it.
I am a woodworker and an amateur luthier for 8 years now. I can tell your father is a very skilled and a dedicated one. Instrument making require diffrent skill set from carpentry although the basic is the same. You said that it was his first time making guitar, a testimony of the know-how he have acquired. Sorry for bad English. Best regards
Yeah. Even in a medium-scale manufacturing place, there's tons of specialized jigs, but this takes it to the next level. I'm not sure I saw a single hand clamp in that shop, other than the kerfing clamps. That wheel of vacuum presses was pretty cool.
It's not , it's cheap and easy. I'm a luthier for one of my guitars you'll be waiting 3-6 months while I cut assemble balance and temper to almost perfection Most of these guitars are fit for beginners , for example no balancing and I didn't even see them filing the frets ! Literally slice a finger open !! I saw tons of split grains , unfinished edges, bad glue adherence , weak bridges, weak nuts , cheap and nasty metallurgy and so on and so on and so on . Top not work it certainly is not , but it's important cheap guitars exist as I would have never been able to learn how to play without one .
I agree in Latin America this happens a lot and it is very sad, however there are many cultures and more so in Asia, where everyone works in businesses and family projects, more than anything because there they find a sense of belonging. Also they don't seem to do any type of work that involves force, they only remove paper tape
The main guitar that is being built here is the 50th Anniversary Crafter SungEum G-50th CE VVS, with vintage voicing, torrefied spruce & rosewood guitar. A truly beautiful guitar by a Korean builder that began in 1972 (that's why the 12th fret inlay). Although there is a fair amount of automation and CNC assist, I am really impressed with the individual craftsmanship that still goes into the manufacture. Of special note is the binding, inlays and the combination of machining and man that produced the joining of the neck. I own an Epiphone DR 500 mce that also has a similar neck construction and I can only hope that it was made and joined with such care and splendid craftsmanship.
@rxw5520 I had a handmade guitar shipped from spain to florida in an ill-fitting case inside one of those cardboard boxes you see at music stores with cheap guitars. that's it. I was shocked! I complained to the luthier telling him he was crazy to ship a high quality guitar that way. It survived and I still have it so i know it's built to last
@@tenypec Yes, and the workers look Korean too. What separates Asia from the West is a sense of national pride, which is being given up in the West - especially in Europe. Asian people are proud of their nations and take pride in presenting the world with good products they enjoy. Their work ethics are much different from ours (better IMHO).
Шикарное видео!! Я поражён этим действом и в восторге от увиденного волшебства!! Очень достойный звук инструмента!! Огромный респект автору видео и творческому коллективу фабрики!! От всей души, желаю вам процветания!!
Thank you for this fascinating video. The workers obviously take pride in their company and their guitars. The only moment that left me wondering was the fret installation at around 17:45 I'm sure more work went into setting the frets correctly and would have enjoyed seeing how it was done
I'm certain that they skipped the step where used a fret press to fully seat the frets. You could see they stuck up in the middle, and the he was only seating them at the ends--except where the fretboard went over the body. Drove me crazy!
What people fail to realize is much of this production is used by big name guitar companies. People mock this kind of production, but Taylor, and Gibson uses much of these techniques. I toured the Taylor factory and realized not much at all is hand made.
@@hargisP2 Were it not for machines, we wouldn't have much. As a matter of fact, my late mother-in-law had an acoustic Gibson "made elsewhere", as they say. We have it, but wifey and I don't play. Aesthetically, it's perfect.
Да вот же. Сидели бы в США ковбои на ранчо и лабали бы себе кантри на гитарах. Так нет же. Надо обязательно залезть везде, принести демократию, понастроить баз во всем мире.
Thank you for sharing your factory with us. I looked at your website too. What an amazing range of beautiful designs you have. Wonderful accomplishment from many years of hard work. You have every reason to celebrate what you have created.
So much for the tones of woods used in making a instrument, as far as the mass produced version I would have to play some before I’d buy one to hear if it’s a good guitar or not. I’ve played two exact models of a New Yamaha 1986 APX-10 stereo, 1 was a keeper the other was left behind at the shop to sell to someone else. Still have it today some 33 yrs later.
성음 was my first guitar. The quality and the sound is top notch at the price range. I even didn’t know that requires this much process. Thanks for the vids.
As a violin maker who works in the traditional method, by hand, from scratch, I can’t say much good about this except it makes guitars available for people without a lot of money.
... that's exactly what they are? While they are mass produced, there is clearly a lot of engineering and human attention that goes in to them to ensure they play well and look decent for what they are.
Показаны далеко не все этапы производства. Но, в целом, весьма познавательный видос, для непосвящённых. Хотя сам бренд и его гитары весьма посредственны.
What I think is amazing is that someone had to figure out the exact lengths, for instance, of the sides, and their curvature, to be fastened end-to-end that way, and later have the front & back pieces glued to them, then they didn't even need to trim anything off. Also the routers and the CNC machines all had to be programmed. It's amazing how well they came out!
I mean, you just make one once, and if it's 45mm too long, start with a piece of wood that's 45mm shorter next time. Don't really need to figure much out.
Assembly production of guitar makes it affordable to everyone. This is the first guitar for young children to start learning then to better guitars later. Great video, thanks.
Realmente quedé sorprendido por la cantidad de artesanos que involucran para hacer una guitarra. Su profesionalismo y dedicación hasta en el mas mínimo detalle se nota en el video. Larga vida para todos ustedes. Un saludo afectuoso desde Chile..ojalá llegara esta marca de guitarra acá para obtener una. Gracias.
They are using some rather solid machinery and methods. The guitars are branded 'Sungeum' which means 'accomplishing the sound' and is a well known brand in the Korean market. Crafter is the name of the parent company. HyunKwon Park, founded the company. The first guitars were built in the basement of his home where he had just 20 square meters of space and a staff of 4.
Приятно смотреть на работу людей, они дарят людям радость взять в руки гитару и играть мелодию Любви и многое другое, спасибо вам, У меня ИБАНЕЗ акустика, тоже большое спасибо, Поклон Вам 🎸🍾🎹🙏🙏🙏🤠
I have a Crafter guitar, bought in Brazil. Excellent finish, perfect tuning, good sound (solid top) and reasonable price - much cheaper than guitars of the same configuration from other, more famous brands.
Im a luthier, and yeah, months go into each instrument. Machines can only do what you command, but a luthier is improvising and making little decisions the entire build. Each piece of wood is different, even from the same part of the same tree, so you have to develop intuition for how minor variances in stiffness, density, etc will affect the overall instrument... Or maybe im just trying to justify doing things the hard way for little pay
I’m an experienced “Parts caster builder”. I’m venturing into building my own solid body instruments, then learning to laminate and carve my own necks… After watching this video, I’m thinking seriously about ordering one or two acoustic kits, and learning how to “refine “ them during assembly… CNC is an awesome tool! Higher end guitar makers have employed such machines for decades, btw! Once I am comfortable with the results of kit building acoustics, I may try my hand at hand cutting/carving. Maybe not .😅 In any case, the video is pretty cool! Again, my only issue is obscene profit margins!
There is a moment when you can see an intricate inlay for an another guitar. It always gives me shivers. It is like: I want an acoustic guitar with a high quality fingerboard and then I want you to carve out half of it and put a plastic instead. Not to be negative I thoroughly enjoyed the video and Crafter Sungeum 1912 are very nice guitars.
@@DaveMorrisonMusic Now, there is probably not one single genius who came up with all of this. The process and all of its components must have been developed over decades.
AUN CUANDO ES UNA FABRICA DE GUITARRAS EN MASA, VEO QUE HAY MUCHISIMO TRABAJO ARTESANAL Y ESO HACE QUE EL SONIDO DE ESTAS GUITARRAS SEA HERMOSO. LA COMBINACION DE LA AUTOMATIZACIÓN Y LA ARTESANÍA, PRODUCE UN GRAN SONIDO. FELICITO A ESTOS TRABAJADORES POR LA PRODUCCION DE UN HERMOSO INSTRUMENTO.
Nah. It started off with some employee that knows nothing about guitars randomly selecting pieces of wood with no care for the grain. It didn't get much better after that.
The positioning had been carried out before the bit we saw here. The bridge (or a template) will have been used to mark where the finish needs to be removed for the glue. Positioning the bridge for glueing is a bit like dropping it into a pocket. The method I was taught involved putting masking tape where the bridge will go. Accurately position the bridge and trim the excess masking tape away from around it leaving a piece the exact outline of the bridge. Apply the finish over the masking tape and then remove it after leaving a pocket back to the bare soundboard.
Так это же конвейер, мастеров там нет, одна операция - один работник, но качество выше чем у мастера, т.к. одну операцию выполняет сотни раз в день, мастеру такое и неснилось!)))
Fascinating process for what looks like a quality guitar. I wish manufacturers would glue the bridge directly to the soundboard though instead of sticking it on to the polished surface. This is a constant point of failure even on top brand guitars.
When they installed the bridge, they put it over some clear coat. That bridge will eventually lift. You need to make sure the area the bridge is being glued to has ZERO clear coat under it. Rewatch this part in the video about 18:20 in and youll see at the corners of where that bridge is being installed has clear coat. Also you really need to paint with a brush the glue on.
Also not a fan of the size or material they are removing to install that output jack/preamp box in the guitar. Thats not an area i want to cut a huge chunk of wood out of.
Also be weary of undersaddle pickups, the take away the direct contact with the bridge and saddle. The more contact that the saddle and bridge are making, the better it will sound unplugged.
@@ctcards2636 That's where Taylor put their battery box and output jack, and they seem to know what they're doing. There's plenty of material still there, at least seven layers of lamination. That's why they put a big block of material in there to start with.
I've had my crafter for over 15 years and I've had zero issues with it. Yes it's considered somewhat of a cheap guitar but it sounds great and it's been reliable. I also play a Dean and a Martin 12 string so I do know what I'm talking about. This is a well-made budget guitar.
Estou enamorado, com tamanha maravilha, parabéns pelo vídeo,e parabéns para os trabalhadores desssa empresa ou fábrica de alegrias, pois é isso, que um violão nos trás.
Why would you never own one? Have you ever played a Crafter guitar? They are consistently as good as instruments costing three times as much. I own four Crafters, all but one bought cheaply from eBay!
"I'd never own one".... What a foolish comment... I used to build Guild guitars in the Tacoma Guitar Factory, which was arguably the best era of those instruments. The woods, machinery and techniques were nearly identical to those used in this video. The only difference was that I didn't see any Hispanic or white people working along side the Asians, which would have been the case in the Tacoma factory.
@@corkystclair7475 I’m going to buy a F-512 in a few months. I don’t buy Chinese made guitars, period. Japanese, only if it’s made in Japan. I have 2 Yamahas. I’m a made in USA only buyer these days. I’ll remain foolish. I’m against all USA companies having their products made overseas. I want my guitars to say, Made in USA.
Hi my name is Tino. I really like your work I wish I could be like you. Because I always wanted to have a guitar especially a bass guitar so l hope l will see you a by something from you ❤❤❤
That was really interesting to watch. I’m surprised by how much super glue they use in initial construction and how they use wood glue on the frets instead of super glue. That was interesting. Also I’m curious how long those clamp times were. Cool video.
A good Guitar doesn’t use superglue or wood glue for frets. They use hide glue or something similar like they do to set the neck and the bridge plate. It can be heated allowing the parts to be removed.
@@Acemechanicalservices Titebond Original white glue can be unbound when heated. Hide glue is traditional because it was the only glue available in the old days. Some purists demand it, claiming it transmits sound better, but many wonderful sounding guitars are built with white glue. Manufactures charge a premium for hide glue because it's less convenient .
Crafter guitars are beautiful guitars and they sound fantastic. I dont own one, but I have played a Crafter, and I highly recommend these guitars. One day, I will own one.
In order of importance: 1. If it's not a counterfeit version 2. If it's a playable instrument 3. If worker management is reasonable with employees, looks like a relaxing, productive, dedicated workplace making instruments for artists.
Yeah, I wonder what that goop is they used. If it's epoxy, that neck is never coming off. If it 's just a way to make a sort of conforming mold, but doesn't actually bond, then that would be OK. But then they smeared a bunch of what looked like superglue on the fingerboard extension - that could be tough to get off without damage.
Ao nível de inteligência, criatividade e competência à que o homem chegou, seria suficiente prá vivermos bem, tôda a humanidade! Principalmente acabar com a fome!
I'm surprised that in many parts they just stick the part "by professional guess" not using precise templates. But I suppose doing thousands of these instruments weekly you could make them in dark be one hand and be still reasonably precise.
I almost bought a Crafter.. To this day I remember trying it in a shop and being surprised how good an different it was to everything else.. In the end I got a Yamaha, but my mind is still on that one magical Crafter..
You should always buy the "magical one" when you come across it. Even in a process as automated as seen here you sometimes get instances when everything falls into alignment: the best pieces of wood just happen to end up in one guitar on a day when everyone on the production line is having a good day...
@@ZonkerRoberts True, maybe the guitar itself wasnt special but it somehow clicked with me.. but the yamaha i got is also a nice guitar, probably better then that crafter, but yeah I would love to play it again, its a small shop there is a chance they still have exact one laying around
But lots of people just can afford a guitar like this. And for this the price-performance ratio is incredible good, because this is more than 10 times cheaper but not 10 times worse to a 100 % handcrafted guitar and if you can see still with lots of handcraft.
Incredible the amount of steps that it takes to create instrument, we are so blessed❤ I thoroughly appreciate and now realize the amount of effort it took to build the ukulele that I enjoy daily❤ embrace me so much happiness John 3:16
I watched a hand made guitar video by greenfield guitars, and it was absolutely stunning, watching this just makes my heart sorrowful. I never want a guitar that I buy to have been made in a place like this. It is still interesting tho
But this is how a beginner can get a precision-built instrument for a few hundred dollars that is perfectly playable. And that means that more aspiring players will stick with it, and mature into real guitarists who will eventually buy hand-made guitars from real luthiers. The guitar shown here is all solid woods and obviously built to last. If care was put into the bracing design and selection and curing of wood, these guitars should play well and sound good. The video maker could have taken ten more minutes to stretch the strings and get them in tune, though.
I bought a sigma guitar for $180 in the early 80s. Twenty years ago my son broke it by accidently sitting on it. I got it fixed and it played and sounded better after that than it did brand new. Any production guitar with a little TLC can last a long time and sound great.
Liebe koreanische Leute, ihr seid so super! Immer fleißig und einen Schritt voraus. Jeder liebt euch ❤ Danke für das Video, danke für die wunderschönen Gitarren. 🙏
I am happy that sound engineering principles can result in low cost instruments for people to play, but fine, engineering and workmanship is not the same as art. Most of what you see is designed to make the instrument appear cosmetically appealing as opposed to sonically excellent. A manufactured acoustic instrument will never sound as good as a handmade instrument because there’s not enough time taken with the elements that are important to making the guitar sound excellent.
@@ZRJZZZZZ To be fair, that's mostly because they JUST put on new strings. The tuning literally went from bad to worse within that 15 seconds of playing
@@Marg-nt7qm Yet most things are manufactured in China. Quality control does exist there, you just have to pay for it, which most cheaper products and their companies won't do.
Cool to see a very thoroughly manufactured guitar. Not my kind of guitar building cause there isn’t much hand work done. But it still takes skill to run these machines and program CNC/ laser cutting so I certainly respect the way they mass produce these guitars and I’d pick one up to try. One thing that puzzles me is that cement looking slop they put in when they join the neck to the body Good luck prying that apart for a total neck reset one day
I've built a few good acoustic guitars. This video was interesting, if a little depressing. None of these instruments seemed loved by the craftspeople making them: it was just a job. Call me superstitious but that's going to affect the tone.
I agree, of course I want my guitars made with Love, but these are engineered for production over being crafted for sonic ability and longevity. They want someone to pay $300 for it and go away haha
You do realize most factories that make guitars are exactly that for their employees? Jobs... Do you really think a Squier is made any differently, or more lovingly lmao
Sehr gut gemacht. Ich bin Maschinenbau-Techniker und gleichzeitig seit kurzem auch Gitarrenspieler. Habe einige Arbeitsläufe gut befunden, aber auch besser gemacht werden kann.
В океане средь могучих волн, где дельфины нежатся с пелёнок, раз попался под рыбацкий борт, маленький попался дельфинёнок...я тоже не умел играть, но когда в детстве услышал эту песню, сказал себе.... Я буду играть
*"Turn On Subtitles(CC) and Watch the Video!☝"*
(영상 우측 상단에 자막(CC)을 켜고 시청하세요 :)
❤
Not like how gluing the bridge and frets..
@@karslake10 They do use a lot of glue.
i've played Crafter and found the quality to be worse than Wal-Mart toy guitars.
Uu y i y t-un bu gt
Thank you for this very impressive tour ! I have been playing guitar semi - professionally since 1968 , and have had many books on guitar construction , but I had yet to see a video showing all the necessary procedures . This is most enjoyable , and again , thank you very much !!!
Most impressive!! Never realized that there were so many steps with so many dedicated workers involved.. Thank You so much!!
My Dad made me my first guitar when I was around 14 years old - he was a carpenter by trade although he had never built such a thing before. Watching this, I now realize, what incredible skills my Dad must have possessed and it's taken this video, 60 years later to realize it.
Oh, yes. Fine carpentry is an admirable skill and patience. ❤
That is definitely admirable.
I am a woodworker and an amateur luthier for 8 years now. I can tell your father is a very skilled and a dedicated one. Instrument making require diffrent skill set from carpentry although the basic is the same. You said that it was his first time making guitar, a testimony of the know-how he have acquired. Sorry for bad English. Best regards
Thank you Andrew. Yes, I wish I had kept that first guitar, it would be priceless for me now!
❤❤❤
정말 노동자들이 장인정신이 깃들어 있네요..
음악을 할수있게 해주는 당신들을 진심으로 감사드림니다
they are fucking expensive.
Fascinating detailed video. Thank you for not adding music. Always better to hear the raw sounds.
This was fascinating to watch. I'm more impressed by the engineering that went into the machinery used to build these guitars.
Грош им цена . Если гитары на 3 месяца не хватило.
I agree that is what blows my mind
Yeah. Even in a medium-scale manufacturing place, there's tons of specialized jigs, but this takes it to the next level. I'm not sure I saw a single hand clamp in that shop, other than the kerfing clamps.
That wheel of vacuum presses was pretty cool.
Yes, and that engineering had to come together FAST.
Yeah. It looks easy with the right equipment and procedures.
I was absolutely amazed how much manual labour still goes into this "mass produced" guitar. This is top notch work!
It's not , it's cheap and easy.
I'm a luthier for one of my guitars you'll be waiting 3-6 months while I cut assemble balance and temper to almost perfection
Most of these guitars are fit for beginners , for example no balancing and I didn't even see them filing the frets ! Literally slice a finger open !!
I saw tons of split grains , unfinished edges, bad glue adherence , weak bridges, weak nuts , cheap and nasty metallurgy and so on and so on and so on .
Top not work it certainly is not , but it's important cheap guitars exist as I would have never been able to learn how to play without one .
It's really not that much. If you want to see a lot of manual labor, lookup videos of people handmaking the entire thing. It takes forever.
Clearly you are beginner. This is very cheap stuff. Fine for someone starting out.
@birchthebirch4593 for all solid guitars. which do you think is cheaper, branded and already made or built by a luthier?
@@birchthebirch4593 But these don't cost thousands of dollars. You get what you pay for....
It was good to see this done and even better to see older people still active and doing meaningful work!
Because they cant live without working at that age. That's sad and not good
They'd rather have a decent pension
I agree in Latin America this happens a lot and it is very sad, however there are many cultures and more so in Asia, where everyone works in businesses and family projects, more than anything because there they find a sense of belonging. Also they don't seem to do any type of work that involves force, they only remove paper tape
It might be a meaningful product but the work seems mindlessly repetitive to me
The main guitar that is being built here is the 50th Anniversary Crafter SungEum G-50th CE VVS, with vintage voicing, torrefied spruce & rosewood guitar. A truly beautiful guitar by a Korean builder that began in 1972 (that's why the 12th fret inlay).
Although there is a fair amount of automation and CNC assist, I am really impressed with the individual craftsmanship that still goes into the manufacture. Of special note is the binding, inlays and the combination of machining and man that produced the joining of the neck. I own an Epiphone DR 500 mce that also has a similar neck construction and I can only hope that it was made and joined with such care and splendid craftsmanship.
@rxw5520 I had a handmade guitar shipped from spain to florida in an ill-fitting case inside one of those cardboard boxes you see at music stores with cheap guitars. that's it. I was shocked! I complained to the luthier telling him he was crazy to ship a high quality guitar that way. It survived and I still have it so i know it's built to last
About $1,600.
I've been working on guitars for over 45 years and this impressed me very much, so glad most of the work is still done by hand.
That was amazing! May be mass produced, but a lot more craftsmanship goes into them than I would have guessed...very cool!
The truth about Chinese craftsmanship is, the workers take great pride in what they do and always strive to perform as well as they can.
@@motioninmind6015 ... Crafter is a South Korean company! ... nothing Chinese.
Didn't really see any craftsmanship here.
This is just assembly line manufacturing.
What craftsmanship? It’s literally just a bunch of machines and a few people gluing stuff in a few times!
@@tenypec Yes, and the workers look Korean too. What separates Asia from the West is a sense of national pride, which is being given up in the West - especially in Europe. Asian people are proud of their nations and take pride in presenting the world with good products they enjoy. Their work ethics are much different from ours (better IMHO).
Шикарное видео!! Я поражён этим действом и в восторге от увиденного волшебства!! Очень достойный звук инструмента!! Огромный респект автору видео и творческому коллективу фабрики!! От всей души, желаю вам процветания!!
Yevgeny!
Thank you for this fascinating video. The workers obviously take pride in their company and their guitars. The only moment that left me wondering was the fret installation at around 17:45 I'm sure more work went into setting the frets correctly and would have enjoyed seeing how it was done
you are welcome
That's what I exactly noticed at the moment I saw the one around the middle not going deeper. hahaha...
They are all in the next clip at 17:55
That's all there is to it. Just tap them home. They are cut to a precise length so no trimming.
I'm certain that they skipped the step where used a fret press to fully seat the frets. You could see they stuck up in the middle, and the he was only seating them at the ends--except where the fretboard went over the body. Drove me crazy!
Wow! So Many Steps To Make That Acoustic Guitar! Amazing!
they left out the bit where they go to the vatican to be blessed by the pope.
Much respect for these modern artisans. Even with machines, the building of those guitars is quite the undertaking.
What people fail to realize is much of this production is used by big name guitar companies. People mock this kind of production, but Taylor, and Gibson uses much of these techniques. I toured the Taylor factory and realized not much at all is hand made.
@@hargisP2 Were it not for machines, we wouldn't have much. As a matter of fact, my late mother-in-law had an acoustic Gibson "made elsewhere", as they say. We have it, but wifey and I don't play. Aesthetically, it's perfect.
A arte da construção da música é mais gratificante do que a da guerra. 👏🏼👏🏼👏🏼👏🏼👏🏼
Да вот же. Сидели бы в США ковбои на ранчо и лабали бы себе кантри на гитарах. Так нет же. Надо обязательно залезть везде, принести демократию, понастроить баз во всем мире.
QUá ngon. Quá ok. Hàn Quốc thật là tuyệt vời. Đàn guitar này ở Việt Nam chưa sản xuất được.
Extremely well done video, clearly showing the process. Thank you!
I have a Crafter parlour guitar and can honestly say it’s one of the best made and sounding acoustics I’ve heard.
Молодцы, спасибо за видео. Видно что этот процесс очень трудоёмкий, требующий точности и профессионализма. Очень интересно.
Это тебе не балалайки делать !
Thank you for sharing your factory with us. I looked at your website too. What an amazing range of beautiful designs you have. Wonderful accomplishment from many years of hard work. You have every reason to celebrate what you have created.
So much for the tones of woods used in making a instrument, as far as the mass produced version I would have to play some before I’d buy one to hear if it’s a good guitar or not. I’ve played two exact models of a New Yamaha 1986 APX-10 stereo, 1 was a keeper the other was left behind at the shop to sell to someone else. Still have it today some 33 yrs later.
한땀한땅이란 말이 저절로 나오네요.크래프터 성음 저도 가지고 있습니다.무궁한 발전을 기원합니다
성음 was my first guitar. The quality and the sound is top notch at the price range. I even didn’t know that requires this much process. Thanks for the vids.
I think the title does this an injustice. Yes, they are making lots of them but there's a lot of skilled manual work involved. Very cool.
Muito bem construídos. Dá até vontade de comprar um dessa marca, mesmo sem estar precisando...
What amazing craftsmanship, a combination of fantastic engineering and artistry. Utterly captivating to watch !
As a violin maker who works in the traditional method, by hand, from scratch, I can’t say much good about this except it makes guitars available for people without a lot of money.
... that's exactly what they are? While they are mass produced, there is clearly a lot of engineering and human attention that goes in to them to ensure they play well and look decent for what they are.
Всегда говорил что без изоленты синей и скотча , человечество бы не продвинулось в своём техническом развитии !
Показаны далеко не все этапы производства. Но, в целом, весьма познавательный видос, для непосвящённых. Хотя сам бренд и его гитары весьма посредственны.
Посредственны гитары или игроки на этих гитарах? Можно и на деревяшке со струнами сыграть, было бы мастерство.
I’m amazed at the machines used to make these instruments. There’s a lot of smart people out there.
What I think is amazing is that someone had to figure out the exact lengths, for instance, of the sides, and their curvature, to be fastened end-to-end that way, and later have the front & back pieces glued to them, then they didn't even need to trim anything off.
Also the routers and the CNC machines all had to be programmed.
It's amazing how well they came out!
They had to be trimmed. The video didn't show it.
I mean, you just make one once, and if it's 45mm too long, start with a piece of wood that's 45mm shorter next time. Don't really need to figure much out.
Just taking a break from restringing and cleaning one of my classical guitars, this video amazingly satisfying. Thank you.
Im impressed with the quality i had one of these before and i had no complaints it was a very good guitar.
Assembly production of guitar makes it affordable to everyone. This is the first guitar for young children to start learning then to better guitars later. Great video, thanks.
Hell… how can you not be impressed with that?! 👍🏻
Apparently, there's plenty of selective outrage being expressed by karen-luthiers, closet racists, and garage band alumni.
Well ... I am not 🙂
Realmente quedé sorprendido por la cantidad de artesanos que involucran para hacer una guitarra. Su profesionalismo y dedicación hasta en el mas mínimo detalle se nota en el video. Larga vida para todos ustedes. Un saludo afectuoso desde Chile..ojalá llegara esta marca de guitarra acá para obtener una. Gracias.
Que maravilha a fabricação de instrumento eu toco violão desde 15anos hoje tenho 55anos e muito gratificante parabéns Brasil
Good job guys! Thank you for building amazing guitars:)
Really beautiful. Especially when the finished guitar sounds. You are incredible.
It would be nice if he tu b Ed it properly.
Bruh it's out of tune 😂
우아 귀한 🎸 좋아요 초원과바다 입니다
They are using some rather solid machinery and methods. The guitars are branded 'Sungeum' which means 'accomplishing the sound' and is a well known brand in the Korean market. Crafter is the name of the parent company. HyunKwon Park, founded the company. The first guitars were built in the basement of his home where he had just 20 square meters of space and a staff of 4.
Impressive craftsmanship for both the making of the guitars and this video.
Приятно смотреть на работу людей, они дарят людям радость взять в руки гитару и играть мелодию Любви и многое другое, спасибо вам,
У меня ИБАНЕЗ акустика, тоже большое спасибо,
Поклон Вам
🎸🍾🎹🙏🙏🙏🤠
I have a Crafter guitar, bought in Brazil. Excellent finish, perfect tuning, good sound (solid top) and reasonable price - much cheaper than guitars of the same configuration from other, more famous brands.
Makes you really appreciate what a luthier does and how much time and care they put into making a guitar vs mass production
Im a luthier, and yeah, months go into each instrument. Machines can only do what you command, but a luthier is improvising and making little decisions the entire build. Each piece of wood is different, even from the same part of the same tree, so you have to develop intuition for how minor variances in stiffness, density, etc will affect the overall instrument... Or maybe im just trying to justify doing things the hard way for little pay
I’m an experienced “Parts caster builder”. I’m venturing into building my own solid body instruments, then learning to laminate and carve my own necks… After watching this video, I’m thinking seriously about ordering one or two acoustic kits, and learning how to “refine “ them during assembly… CNC is an awesome tool! Higher end guitar makers have employed such machines for decades, btw! Once I am comfortable with the results of kit building acoustics, I may try my hand at hand cutting/carving. Maybe not .😅
In any case, the video is pretty cool!
Again, my only issue is obscene profit margins!
Tenho um violão Crafter desde 1996... muito bom, de boa sonoridade, tanto acústico como amplificado. Toco com ele até hoje.
There is a moment when you can see an intricate inlay for an another guitar. It always gives me shivers. It is like: I want an acoustic guitar with a high quality fingerboard and then I want you to carve out half of it and put a plastic instead. Not to be negative I thoroughly enjoyed the video and Crafter Sungeum 1912 are very nice guitars.
I'm a professional luthier of 28 years and have made 250 guitars and mandolins by hand and all I can say after watching this is WOW
The unsung heroes are the engineers who design the machinery. They think of everything.
@@DaveMorrisonMusic Now, there is probably not one single genius who came up with all of this. The process and all of its components must have been developed over decades.
@@DaveMorrisonMusic It's Dave in the wild!! I've enjoyed many a sociopolitical talk on your channel.
Unbelievable what effort even in such a mass production guitar needs to be invested.
Thanks for sharing.
Awesome, some job opportunities for the elderly. ❤
AUN CUANDO ES UNA FABRICA DE GUITARRAS EN MASA, VEO QUE HAY MUCHISIMO TRABAJO ARTESANAL Y ESO HACE QUE EL SONIDO DE ESTAS GUITARRAS SEA HERMOSO. LA COMBINACION DE LA AUTOMATIZACIÓN Y LA ARTESANÍA, PRODUCE UN GRAN SONIDO. FELICITO A ESTOS TRABAJADORES POR LA PRODUCCION DE UN HERMOSO INSTRUMENTO.
Fascinating! I have some guitars; I'm amazed at all the craftsmanship that's involved, even with all the machinery...
Not sure I would call it craftsmanship...well ,not artisan anyway...
It was all going so well, till the guy at the end responsible for the tuning played it out of tune. Interesting video though.
Need to stretch them strings that’s all. Fine work and don’t think there folks don’t take pride in their work.
I thought that was hilarious!
Nah. It started off with some employee that knows nothing about guitars randomly selecting pieces of wood with no care for the grain.
It didn't get much better after that.
@@luisvillarreal5262 13:50
@@RylanStorm Okay, plain as day. I must have gotten distracted for a minute to miss that. Lol Thanks.
Fascinating.
Also surprising, to see there is some casual handwork for precision jobs like placing the bridge.
The positioning had been carried out before the bit we saw here.
The bridge (or a template) will have been used to mark where the finish needs to be removed for the glue.
Positioning the bridge for glueing is a bit like dropping it into a pocket.
The method I was taught involved putting masking tape where the bridge will go.
Accurately position the bridge and trim the excess masking tape away from around it leaving a piece the exact outline of the bridge.
Apply the finish over the masking tape and then remove it after leaving a pocket back to the bare soundboard.
Yeah! Intonation will be perfect 🙂
Impressionante! Uma verdadeira aula.
The efficiency of taking the clamps off the dried guitars and putting them directly onto newly glued guitars just blew my mind.
Спасибо мастерам, которые сделали для меня гитару!
Так это же конвейер, мастеров там нет, одна операция - один работник, но качество выше чем у мастера, т.к. одну операцию выполняет сотни раз в день, мастеру такое и неснилось!)))
@@Александр-с8т2щ в итоге получается отличное качество - намного лучше, чем Davinci и Belucci, которые продаются в Озоне ;-)
@@Александр-с8т2щ а кто они если не мастера? это коллективный труд.
The Korean make a good guitar , their instrument are sought after in my country.
Many decades of manufacturing evolution to perfect each step. The amount of custom machinery is astounding.
Fascinating process for what looks like a quality guitar. I wish manufacturers would glue the bridge directly to the soundboard though instead of sticking it on to the polished surface. This is a constant point of failure even on top brand guitars.
... and the way they glue the neck into the body will become a nightmare for neck reset, which they will certainly need after a few years.
When they installed the bridge, they put it over some clear coat. That bridge will eventually lift. You need to make sure the area the bridge is being glued to has ZERO clear coat under it. Rewatch this part in the video about 18:20 in and youll see at the corners of where that bridge is being installed has clear coat. Also you really need to paint with a brush the glue on.
Also not a fan of the size or material they are removing to install that output jack/preamp box in the guitar. Thats not an area i want to cut a huge chunk of wood out of.
Also be weary of undersaddle pickups, the take away the direct contact with the bridge and saddle. The more contact that the saddle and bridge are making, the better it will sound unplugged.
@@ctcards2636 That's where Taylor put their battery box and output jack, and they seem to know what they're doing. There's plenty of material still there, at least seven layers of lamination. That's why they put a big block of material in there to start with.
They did scratch the surface before gluing in the bridge, just like how they scratched the top before installing the neck to the body.
I've had my crafter for over 15 years and I've had zero issues with it. Yes it's considered somewhat of a cheap guitar but it sounds great and it's been reliable. I also play a Dean and a Martin 12 string so I do know what I'm talking about. This is a well-made budget guitar.
Estou enamorado, com tamanha maravilha, parabéns pelo vídeo,e parabéns para os trabalhadores desssa empresa ou fábrica de alegrias, pois é isso, que um violão nos trás.
Although I’d never own one, I’m beyond impressed about their automation.
Why would you never own one? Have you ever played a Crafter guitar? They are consistently as good as instruments costing three times as much. I own four Crafters, all but one bought cheaply from eBay!
@@ParaBellum2024I could be wrong but I think crafter also makes the Chinese guild guitars. Very good quality almost as good as my martin
"I'd never own one".... What a foolish comment... I used to build Guild guitars in the Tacoma Guitar Factory, which was arguably the best era of those instruments. The woods, machinery and techniques were nearly identical to those used in this video. The only difference was that I didn't see any Hispanic or white people working along side the Asians, which would have been the case in the Tacoma factory.
@@corkystclair7475 I’m going to buy a F-512 in a few months. I don’t buy Chinese made guitars, period. Japanese, only if it’s made in Japan. I have 2 Yamahas. I’m a made in USA only buyer these days. I’ll remain foolish. I’m against all USA companies having their products made overseas.
I want my guitars to say, Made in USA.
@@herbiesnerd Why? It sounds a little xenophobic.
Hi my name is Tino. I really like your work I wish I could be like you. Because I always wanted to have a guitar especially a bass guitar so l hope l will see you a by something from you ❤❤❤
That was really interesting to watch. I’m surprised by how much super glue they use in initial construction and how they use wood glue on the frets instead of super glue. That was interesting. Also I’m curious how long those clamp times were. Cool video.
A good Guitar doesn’t use superglue or wood glue for frets. They use hide glue or something similar like they do to set the neck and the bridge plate. It can be heated allowing the parts to be removed.
@@Acemechanicalservices that’s not true. Many manufacturers use super glue, PRS comes to immediate mind, in their fret work.
@@Acemechanicalservices Titebond Original white glue can be unbound when heated. Hide glue is traditional because it was the only glue available in the old days. Some purists demand it, claiming it transmits sound better, but many wonderful sounding guitars are built with white glue. Manufactures charge a premium for hide glue because it's less convenient .
Crafter guitars are beautiful guitars and they sound fantastic. I dont own one, but I have played a Crafter, and I highly recommend these guitars. One day, I will own one.
In order of importance: 1. If it's not a counterfeit version 2. If it's a playable instrument 3. If worker management is reasonable with employees, looks like a relaxing, productive, dedicated workplace making instruments for artists.
Muito bom, maravilha mesmo! bons profissionais e digna proficão
Pity the luthier who ever has to do a neck reset on one of these . Looks like they set that thing in very well !
Yeah, I wonder what that goop is they used. If it's epoxy, that neck is never coming off. If it 's just a way to make a sort of conforming mold, but doesn't actually bond, then that would be OK. But then they smeared a bunch of what looked like superglue on the fingerboard extension - that could be tough to get off without damage.
@@kindabluejazz I was also wondering what that brown goo was . That epoxy on the finger board is going to be TUFF
@@kindabluejazz Cyanoacrylate glue (aka super glue) can be easily softened and removed with acetone.
🙂 that was one of my first thoughts too. Whenever such a guitar comes into my shop for a neck reset, I resign.
@@euhdink4501 I wouldn't blame you one bit
Ao nível de inteligência, criatividade e competência à que o homem chegou, seria suficiente prá vivermos bem, tôda a humanidade! Principalmente acabar com a fome!
Simplesmente espetacular trabalho.
I'm surprised that in many parts they just stick the part "by professional guess" not using precise templates. But I suppose doing thousands of these instruments weekly you could make them in dark be one hand and be still reasonably precise.
Aren’t people simply amazing. Imagine, if the folk who design weapons turned their hands to something like this.
Bet they would make some killer guitars.
@@rosewoodsteel6656 Ho ho
Trabalho espetacular!!!
Teknologi Nya mantap keren dan canggih. Semoga sukses selalu sobat
I almost bought a Crafter.. To this day I remember trying it in a shop and being surprised how good an different it was to everything else.. In the end I got a Yamaha, but my mind is still on that one magical Crafter..
Get a real guitar, get a Martin D-18.
@@235buz Not everyone likes spending 3 grand on a maker's mark...
But good for you if you do.
You should always buy the "magical one" when you come across it. Even in a process as automated as seen here you sometimes get instances when everything falls into alignment: the best pieces of wood just happen to end up in one guitar on a day when everyone on the production line is having a good day...
@@ZonkerRoberts True, maybe the guitar itself wasnt special but it somehow clicked with me.. but the yamaha i got is also a nice guitar, probably better then that crafter, but yeah I would love to play it again, its a small shop there is a chance they still have exact one laying around
Incredible process. Hand made is wonderful, but to get a great, affordable, guitar it has to be done this way...
The chord at the end could have been in tune... Otherwise amazing video.
I salivated to play that guitar! It looks awesome.
If I was a luthier I would cry me a river after seeing this.
But lots of people just can afford a guitar like this. And for this the price-performance ratio is incredible good, because this is more than 10 times cheaper but not 10 times worse to a 100 % handcrafted guitar and if you can see still with lots of handcraft.
Looks like a nice guitar. Very impressed with the all wood construction.
Incredible the amount of steps that it takes to create instrument, we are so blessed❤ I thoroughly appreciate and now realize the amount of effort it took to build the ukulele that I enjoy daily❤ embrace me so much happiness John 3:16
Tremendo estos amigos SurCoreanos, son unos magos, ojala hicieran guitarras clasicas, para comprarme unita, gracias por el video.
I watched a hand made guitar video by greenfield guitars, and it was absolutely stunning, watching this just makes my heart sorrowful. I never want a guitar that I buy to have been made in a place like this. It is still interesting tho
But this is how a beginner can get a precision-built instrument for a few hundred dollars that is perfectly playable. And that means that more aspiring players will stick with it, and mature into real guitarists who will eventually buy hand-made guitars from real luthiers. The guitar shown here is all solid woods and obviously built to last. If care was put into the bracing design and selection and curing of wood, these guitars should play well and sound good. The video maker could have taken ten more minutes to stretch the strings and get them in tune, though.
I bought a sigma guitar for $180 in the early 80s. Twenty years ago my son broke it by accidently sitting on it. I got it fixed and it played and sounded better after that than it did brand new. Any production guitar with a little TLC can last a long time and sound great.
Liebe koreanische Leute, ihr seid so super! Immer fleißig und einen Schritt voraus. Jeder liebt euch ❤
Danke für das Video, danke für die wunderschönen Gitarren. 🙏
I am happy that sound engineering principles can result in low cost instruments for people to play, but fine, engineering and workmanship is not the same as art. Most of what you see is designed to make the instrument appear cosmetically appealing as opposed to sonically excellent. A manufactured acoustic instrument will never sound as good as a handmade instrument because there’s not enough time taken with the elements that are important to making the guitar sound excellent.
The very end of the video reinforces the point. The player and the instrument are not in tune.
@@ZRJZZZZZ To be fair, that's mostly because they JUST put on new strings. The tuning literally went from bad to worse within that 15 seconds of playing
Not really, i've seen plenty of mass produced guitars with richer tones than some old rare limited maker's guitars...
BS.
@@Marg-nt7qm Yet most things are manufactured in China.
Quality control does exist there, you just have to pay for it, which most cheaper products and their companies won't do.
Cool to see a very thoroughly manufactured guitar.
Not my kind of guitar building cause there isn’t much hand work done.
But it still takes skill to run these machines and program CNC/ laser cutting so I certainly respect the way they mass produce these guitars and I’d pick one up to try.
One thing that puzzles me is that cement looking slop they put in when they join the neck to the body
Good luck prying that apart for a total neck reset one day
Sungeum never heard. Old makers! This was relax to watch. Machines do a lot of work. Every step is very organized.👍.
I could be final inspector.
I've built a few good acoustic guitars. This video was interesting, if a little depressing. None of these instruments seemed loved by the craftspeople making them: it was just a job.
Call me superstitious but that's going to affect the tone.
Umm . . . I'll side with superstitious.
Yeah, that has nothing to do with the tone.
I agree, of course I want my guitars made with Love, but these are engineered for production over being crafted for sonic ability and longevity. They want someone to pay $300 for it and go away haha
There is no soul in these guitars.
You do realize most factories that make guitars are exactly that for their employees?
Jobs...
Do you really think a Squier is made any differently, or more lovingly lmao
Sehr gut gemacht. Ich bin Maschinenbau-Techniker und gleichzeitig seit kurzem auch Gitarrenspieler. Habe einige Arbeitsläufe gut befunden, aber auch besser gemacht werden kann.
Life lesson: Don't buy any shiiit when the tester doesn't even know how to properly tune the guitar up
Emeğe saygı lütfen adamlar bu işte son noktayı koymuş .
Nossa que magnífico que trabalho sensacional, amo violão demais! Incrível! 😮
20:40 .. and voila, another soulless guitar is forced into existence! Watch for it to show up at a Goodwill near you!!
I feel so sorry for the waiste of all this wood ...
Wow I'm very impressed, the quality seems to be much better than what I expected. I loved the demo at the end 😂
Нестроевич...
this is the kind of factory work i would enjoy.
I can't play a guitar.
You can😅😅
В океане средь могучих волн, где дельфины нежатся с пелёнок, раз попался под рыбацкий борт, маленький попался дельфинёнок...я тоже не умел играть, но когда в детстве услышал эту песню, сказал себе.... Я буду играть
@@валерийорлов-л9кdude I told myself the exact same thing when I heard the outro solo to Mr Crowley for the 1st time.
I can’t play this guitar also! Only Gibson is good enough!🤣🤣🤣🎸🎸🎸
@@rockodlak that's very authentic of you...