Thank you soooo much. I've watched last month then lost the slider on my other side before I put it on smh ..so reordered and now putting the other side on but had to watch you again!!! Because you're that good and helpful for getting my sliders on my gsxr750. Thank you so much for posting!!! Lifesaver.
Ty for your content you have no idea how much you’ve helped me for my GSXR 750 “gixxer”makes no sense to me buuut seriously such great, informative, FACTUAL CONTENT
Very Well done ...Young man. Like Spicoli would say " Totally Narly Dude". I have a 2017 600 with the Charcoal metallic and Red side Fairings. It would beat the 09 Zx6r that I had.
interesting, the longer slider is on the left side. i would have figured it would have went on the side with the exhaust. great video and a lot of good advice.
I done a video on these. I did not go though everything on the install. So I put a link in my videos description to this video. Thanks brother for good work. I try to send all the L gsxr 600/750 guys here that do their own maintenance.
Hey Spunky! Great video. I'm a 46 year old girl and I'm going to attempt to install the sliders on my 750. I am only concerned about the placement of the slider. When you showed that part of the video the slider was already in place so that part was unclear. Thanks in advance for your help! Keep up the great vids!
Hey SweetLeilani75! So the frame sliders bolt right into that triangular looking piece and then the triangular piece bolts onto the actual frame and that’s how everything is held in place just make sure u install the metal circular pieces on the back of the triangular piece before installing it on the bike it helps keep everything stable. I hope that helps! Let me know if u have any other questions. Good luck:-)
@@SpunkyBoyy Her question (and mine) is where on the frame did you bolt the triangular piece? So when we look at the bike, where is the attachment point on the bike? Thanks!
@@failedfishermanBC the triangular piece should be upside down on the bike. The long bolt goes into the single hole and bolts up to the frame. The two bolts on top u screw on the metal circular pieces on the back and it helps secure it on the bike. Hope that helps
@@failedfishermanBC you’re going to need the fairings off to see the hole that the bolt goes into. Once u have the fairings off just make sure the triangular piece is upside down(two screw holes on top and the single screw hole on the bottom) and it should just bolt right up.
Hey man i recently got a 2008 gsxr 600 and been trying trying to look for frame sliders from shogun but can’t seem to find a pair that fits my bike I always find 2011-2016 but not 2008 you know where I can order them and also I’m from Toronto Canada
Thanks so much!!! I watched tons of videos but yours made the best sense and showed alllll the pics that I needed to ensure it was going on correct. Thanks for the clarification now I'm ready to try for the 5th time on my 2011 gsxr 750 the no cut frame sliders I got for my birthday. Great video,
You’re welcome! I tried not to skip any steps, hopefully you’re able to get them on correctly this time! I really appreciate you leaving a comment, and I’m very happy the video was able to help you out! Good luck👍
Jigar Patel thank you very much! I got them off of amazon just type in 2018 gsxr 600 frame sliders on amazon they will pop up. I got the krator ones they are cheaper, shogun’s are the best I just didn’t want spend all that money on them. They are no cut frame sliders you’ll find them easy!
Thank you! Yes, great question you need to remove the fairings because the triangular bracket that the frame sliders bolt into, there is a bolt that holds them on the actual bike, and u can’t access it unless you take the fairings off. Hope that helps! Glad the video helped you out!
Thank you soooo much. I've watched last month then lost the slider on my other side before I put it on smh ..so reordered and now putting the other side on but had to watch you again!!! Because you're that good and helpful for getting my sliders on my gsxr750. Thank you so much for posting!!! Lifesaver.
Awesome Man👊🏻I can’t emphasize enough how happy that makes me! Thank you for watching!
Ty for your content you have no idea how much you’ve helped me for my GSXR 750 “gixxer”makes no sense to me buuut seriously such great, informative, FACTUAL CONTENT
Very Well done ...Young man. Like Spicoli would say " Totally Narly Dude". I have a 2017 600 with the Charcoal metallic and Red side Fairings. It would beat the 09 Zx6r that I had.
Just picked up my first sport bike (gsxr 600) today.. and I came straight to this video lol because I need to know how to do this
congratulations on the new bike man!Love to hear that, that is literally why I made this video! Let me know if you have any questions! Good luck 👍
interesting, the longer slider is on the left side. i would have figured it would have went on the side with the exhaust. great video and a lot of good advice.
Very helpful and straightforward, mine didn't come with instructions 👍
Glad the video helped you! Thanks for watching🙏
Great write up! I have a K8 and am hoping it’s similar and just as straight forward
Thanks man! Should be pretty similar good luck!
I hit the like button. Right when you said. 🥳😂
I done a video on these. I did not go though everything on the install. So I put a link in my videos description to this video. Thanks brother for good work. I try to send all the L gsxr 600/750 guys here that do their own maintenance.
Hey Spunky!
Great video. I'm a 46 year old girl and I'm going to attempt to install the sliders on my 750. I am only concerned about the placement of the slider. When you showed that part of the video the slider was already in place so that part was unclear. Thanks in advance for your help! Keep up the great vids!
Hey SweetLeilani75!
So the frame sliders bolt right into that triangular looking piece and then the triangular piece bolts onto the actual frame and that’s how everything is held in place just make sure u install the metal circular pieces on the back of the triangular piece before installing it on the bike it helps keep everything stable. I hope that helps! Let me know if u have any other questions. Good luck:-)
@@SpunkyBoyy Her question (and mine) is where on the frame did you bolt the triangular piece? So when we look at the bike, where is the attachment point on the bike? Thanks!
@@failedfishermanBC the triangular piece should be upside down on the bike. The long bolt goes into the single hole and bolts up to the frame. The two bolts on top u screw on the metal circular pieces on the back and it helps secure it on the bike. Hope that helps
@@failedfishermanBC you’re going to need the fairings off to see the hole that the bolt goes into. Once u have the fairings off just make sure the triangular piece is upside down(two screw holes on top and the single screw hole on the bottom) and it should just bolt right up.
@@failedfishermanBC there is only one place to put them. they go in place of the motor mount bolt.
Doing this install myself for my 750 but my kit only came with 2 washers should I use them for the bigger bolt or the ones in the pegs?
Great video and easy follow through.
josh bardnecci thank you very much!
Who was that cutie in the back in the beginning 😍
My brother Rubin
Nicely done buddy
Hey man i recently got a 2008 gsxr 600 and been trying trying to look for frame sliders from shogun but can’t seem to find a pair that fits my bike I always find 2011-2016 but not 2008 you know where I can order them and also I’m from Toronto Canada
Thanks so much!!! I watched tons of videos but yours made the best sense and showed alllll the pics that I needed to ensure it was going on correct. Thanks for the clarification now I'm ready to try for the 5th time on my 2011 gsxr 750 the no cut frame sliders I got for my birthday. Great video,
You’re welcome! I tried not to skip any steps, hopefully you’re able to get them on correctly this time! I really appreciate you leaving a comment, and I’m very happy the video was able to help you out! Good luck👍
What brand was the frame sliders? I got 2019 GsXR750
Nice! Krator they are like 40bucks
Ioiioiio
*_Great vid my friend! Enjoyed, thanks for sharing and keep it up!_* 😀👊
Thank you for watching! I appreciate the awesome feedback👍
Great vid. Where can i get these for my 2018 gsxr 750? Can you include where you purchased them please?
Jigar Patel thank you very much! I got them off of amazon just type in 2018 gsxr 600 frame sliders on amazon they will pop up. I got the krator ones they are cheaper, shogun’s are the best I just didn’t want spend all that money on them. They are no cut frame sliders you’ll find them easy!
Your hair is legend 💪🤘🏼✊👍😇
Thank you🙏
@@SpunkyBoyy is it the same today as in the video?
@@powamoto it’s longer now haha there is a link to my Instagram with more recent vids of me. Thanks for the kind comments I appreciate that bro🤙🏻
@@SpunkyBoyy ok will definitely connect on IG too
Bike is soo clean! nice
Keepin It Real thank you very much! I appreciate that👍
Thank you your tutorial has helpful for me. Happy new year from Edmonton Canada 🇨🇦
No problem! Thank you very much for watching and I’m glad the video was able to help you! Happy New Year!
👍 Great investment and nice video!
Thank you!
Yo thats that gangsters son from the tv show
Hahaha never seen that show but thanks for watching
@@SpunkyBoyy it's called the sopranos I think the kids name is AJ in the tv show
@@9yearsago733 haha ya i just saw it
Very clean bike 💪🏾
Great video dude 👍🏻
Thank you very much!
Good video pal still need to invest in some for my bike yet
Great investment! You should get some it’s really worth the money!
Good job young man.
Gixxerboy Roy/LuvDrums Waters thank you very much!
Great video. Can I get the name of the sliders please? like brand or more detalis? Thank you
Thank you for watching! Yes of course they are Krator no cut frame sliders $35-$40bucks. They are on the cheaper side, but they work well.
where did you order the frame sliders? i have a 2013 GSX600
I've been looking for this fairing kit color way and have yet to find it.
Great video, dude!
Thanks man!
Nice video bud!
Thanks man!
Easy instructions 🤘
rolando medina thank you! Glad the video was able to help you out! Really appreciate the awesome feedback🤙🏻
Excellent video! It is really necessary to take fairing off? Or can you install them with those on? Appreciate your help
Thank you! Yes, great question you need to remove the fairings because the triangular bracket that the frame sliders bolt into, there is a bolt that holds them on the actual bike, and u can’t access it unless you take the fairings off. Hope that helps! Glad the video helped you out!
The darlings are such a bitch to get back on for me
Nice video man thanks, yo do you lift weights?💪 looking jacked
Thanks glad the video was able to help you out! I do every now and then, but I mainly just do cardio! Thanks for the compliments👌🏻
What frame sliders did you buy ?
Kratorno cut frame sliders for around $35
Which side is the short one, left or right?
Left(clutch side)
Mahalo much Sir
Tighten the bottom bolt to what?
right😂🤷♂️
Does not look too difficult but I worry I'll snap a clip
All the work you do on bikes and no torque driver for measuring tight’ness
Dont need it for basic stuff like this