I already done this set up using Pioneer DDJ-SR and Virtual DJ software. I remember you had the same video before but using DDJ-200 with Serato SL box. Thanks sensei!
Thank you so much for your video! It already helped me a lot. Is there any way to select the "through" setting in Rekordbox with this set up? I'd love to play actual vinyls through Rekordbox.
Did this with the DDJ-T1 and a pair of PLX-500, the only audio cable in the whole setup was from the T1 to the speakers, everything else was digital usb, very clean setup and that was over 3 years go
You can probably do the same under windows with ASIO4ALL assuming both the audio Interface and the FL6 is ASIO compliant. All that being said it is easier to do it under MacOS as the aggregator is built in.
So far, I have found that macOS handles syncing of aggregate devices much more reliably. I haven’t quite figured it out on Windows yet. You can get weird glitches like your FLX6 working properly but the timecode jumping in and out of lagging.
Hi there! So at 3:50 you mentioned that we can't use the Pioneer RekordboxDJ DVS Interface 2, because it would create a conflict. Would that conflict also exist with the DDJ-200 which doesn't have any sound card? It would be a perfect setup for me as I'm already using the DDJ-200 in a mixer case with 2 PLX turntables beside it (selling my DJM-S9). Also, what about using PhaseDJ DVS in this scenario? I'm trying to avoid moving to Serato as I already have the XP1 (not the XP2!) Thanks!
So does this enable you to mix all 6 channels at the same time. I noticed when you was moving the vinyl it was imitating on the jog wheel. Is there anyway to run both turntables and jog wheels independently 😊
Very interesting video, I have 4 questions: 1) Can you also set the 'Absolute Mode'? 2) Would it also work with the new Reloop Flux interface, (it's USB Class-Compliant)? 3) My question is still theoretical: instead of connecting the XP1 or XP2 to activate the DVS, could we connect the Interface 2 and also connect the Traktor Audio 6? Or would there be conflicts 4) Can the Audio 6 interface be used with a classic 2-channel mixer and Rekordbox, like the Interface 2, of course with DVS plugin active via license or with XP1/2 hardware?
That is so amazing... by the way Kuya can I use rekordbox on my old school set up that I have( dnx600 and sc3900)? Just wondering. Im using Serato with it right now. Thank you so much.
Heyy question can we use the hid feature on the cdjs with a flx6 connecting cdjs to the laptop via usb using a hub and then the flx6 to the computer using a different hub?
Thank you for the detailed explanation, you're also really good at scratching. Can I use a controller not compatible with Rekordbox (Ddj-rev1 or Numark Party Mix 2), and instead of the Traktor interface use the newer Interface 2 Pioneer (avoiding the conflict between controller and interface aggregating devices), to be able to use DVS the same way you did in the video?
nice video, Do you think it is a good idea of buying this DJ Controller and have a converter in between to to convert the RCA to XLR to have a balanced and better sound quality? One thing to be said is, im just a starter and googling since almost 1 month and trying to find something good, and also not too expensive . so would be very happy if you can reply.
@priyonjoni Is this possible with the Rev 7 too? I used to own turntables, SL1 & SL2 back in the day but I'm now wanting to try a controller. Also, I like the idea of being able to add a turntable next to Rev 7 for the future.
What if i want to link my technics to this unit but do not want to use timecoded vinyl, i just want to use them with my vinyl thai i have and use the other 2 channels with rcordbox ? What do i need to link them please? Many thanks in advance
is it possible to set this up thru asio? I have a PLX 500 im trying to make work on a FLX 10 hooked up to a dac so i can share my speakers with my computer.
Possibly related question: Would Serato Pro run on my trusty old Pioneer SB3 if I had a Pioneer XP2 chained into my 16” MacBook Pro? Or am I still stuck with Serato Lite? Thanks in advance!
The PLX-500’s interfaced isn’t designed for real-time connectivity. It will actually introduce more latency than a proper interface. It’s designed for ripping vinyl into the computer. PLX-500 isn’t really a professional DJ turntable. It’s a playback and vinyl ripping device that takes design cues from the PLX-1000.
hi PJ, can a DDJ sb3 + phase +any turntable with serato works? i saw you use a CDJ +phase+ light sword (that's dope btw). i ask this cause i want to use the ddj fader to control the right side and phase to scratch properly.
This is AWESOME, thanks for you time and for share this knowlege. If is possible, may i ask ONE little point? In the video you say to deactivate the TRHU function in the soundcard and software. IF i wanna use real vinyls in thru mode, is this possible? Or to this setup work, is a must have the THRU deactivate and this scenario using real vinyls is not possible? Again... thanks for the video. Full support.
It will not work. It will only work if you have the interface plugged into a mixer where you’re using the interface’s individual output for each channel. That’s not the case here. The DJ software has no capability of “pass-thru.”
Wooow just what I was looking for, I already have the flx 6, and now im learning to use turntables, but I can't find the traktor audio 6 available :( another suggestions/alternatives? Thanks!!!
Hello there Pj, 1 quick question... i got ddj flx10 running with RB... is it possible if i wanted to connect with PLX 500 and straight away use the turntable (plug and play). Hope to hear from you soon. Thank you in advance
Hey there thanks for vid. Wondering if you have a guide about connecting turntables to a FLX 10 as well. Because whatever i do i can only hear sound on headphones and no sound output either via usb-c, master and booth plugged into my PC (no mac). Thanks!
Using this method would it allow you to play your records on the turntables or are you just controlling the track that’s loaded in rekordbox with them? If this makes sense lol
@@priyonjoni I never knew that to be honest mate. Im still breaking into the new tech, although im 31 I have been oldskool for years on vinyl and standard cdjs. Only had new equipment i.e flx 6 since 2020, before that i was using pioneer cdj 100s with a gemini 626 mixer for some time so im new to all this techy stuff 🤣
If there is a reliable way to aggregate devices AND keep them in sync on Windows, then it’ll be possible. I could be wrong, but at the current moment, I don’t know of any reliable utility.
The issue with windows is that there is no effective way to aggregate multiple devices and keep them in sync. This goes for both native or 3rd party method.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Want to see Serato run on a handheld video game console? Check this out ruclips.net/video/BLW-NdjoqhQ/видео.html
This is some great info if I ever have to use it. I'm happy to see Traktor is working to keep the party going. Thank you.
Nice video ! I’m never gonna use this myself but the instruction on how to create a virtual audio device is gold !
please please make a video on how to do it on Windows 10
And that's my problem with my ns7ii. I'm hoping to get a new controller soon. Thanks for the video. Very informative.
Another banger video! Thank you, you wizard 🙏🏾
No problem!
I already done this set up using Pioneer DDJ-SR and Virtual DJ software. I remember you had the same video before but using DDJ-200 with Serato SL box. Thanks sensei!
Thank you so much for your video! It already helped me a lot. Is there any way to select the "through" setting in Rekordbox with this set up? I'd love to play actual vinyls through Rekordbox.
the best channel on you tube !!! strait too the point , profesionaly explained and i like his voice can watch those videos all the time !!!!
Did this with the DDJ-T1 and a pair of PLX-500, the only audio cable in the whole setup was from the T1 to the speakers, everything else was digital usb, very clean setup and that was over 3 years go
You can probably do the same under windows with ASIO4ALL assuming both the audio Interface and the FL6 is ASIO compliant. All that being said it is easier to do it under MacOS as the aggregator is built in.
So far, I have found that macOS handles syncing of aggregate devices much more reliably. I haven’t quite figured it out on Windows yet. You can get weird glitches like your FLX6 working properly but the timecode jumping in and out of lagging.
AM FROM JA AND I LEARN ALOT FROM YOU
Glad I could help!
so instead of vinyl can you use xdj 700's...as i have 2 of them getting a flex gt would be the cheapest way of being able to mix on 4 units
Amazing !! I’m trying to do it with a DDJ400 and one vinyl player !!
That’s brilliant would it work on the numark sound card
with the Pioneer DDJ-FLX6 podría conectarlo a mi plato de vinilo / tocadisco? Aún no me la he comprado porque no parece que tenga entrada phono
Hi there! So at 3:50 you mentioned that we can't use the Pioneer RekordboxDJ DVS Interface 2, because it would create a conflict. Would that conflict also exist with the DDJ-200 which doesn't have any sound card? It would be a perfect setup for me as I'm already using the DDJ-200 in a mixer case with 2 PLX turntables beside it (selling my DJM-S9). Also, what about using PhaseDJ DVS in this scenario? I'm trying to avoid moving to Serato as I already have the XP1 (not the XP2!) Thanks!
The conflict happens when there are two or more rekordbox natively supported devices. That includes a DDJ-200.
So does this enable you to mix all 6 channels at the same time. I noticed when you was moving the vinyl it was imitating on the jog wheel. Is there anyway to run both turntables and jog wheels independently 😊
Very interesting video, I have 4 questions:
1) Can you also set the 'Absolute Mode'?
2) Would it also work with the new Reloop Flux interface, (it's USB Class-Compliant)?
3) My question is still theoretical: instead of connecting the XP1 or XP2 to activate the DVS, could we connect the Interface 2 and also connect the Traktor Audio 6? Or would there be conflicts
4) Can the Audio 6 interface be used with a classic 2-channel mixer and Rekordbox, like the Interface 2, of course with DVS plugin active via license or with XP1/2 hardware?
That is so amazing... by the way Kuya can I use rekordbox on my old school set up that I have( dnx600 and sc3900)? Just wondering. Im using Serato with it right now. Thank you so much.
Will this method work with the new Reloop Flex for DVS???
So is there absolutely no way to do it with Serato? All other factors being the same?
10:27 the songs from 张靓颖 in the playlist indicated a fluid-genre style DJ's choices
Cool…guess Rane finally tossed out the SL for the mixers…going back down the turntable rabbit hole w/rekordbox, wish me luck…
Can I add CDJs?
Yes, just use HID mode.
hi i tried using the A10 and serato time codes but not working dosent pik up the vynil any solution
Would the serato sl1 work the same way
No because support for the SL1 has been discontinued over a decade ago.
@@priyonjonithanks just ordered an A6
Hello, what is the name of the Track do you use for scratching ?? Thank you
Heyy question can we use the hid feature on the cdjs with a flx6 connecting cdjs to the laptop via usb using a hub and then the flx6 to the computer using a different hub?
You can use HID mode to add additional CDJs.
Okay PJ, so with the same hardware as shown here, could we use Serato in place of RB? EDIT: I see the answer is no,
Great work
Thank you for the detailed explanation, you're also really good at scratching. Can I use a controller not compatible with Rekordbox (Ddj-rev1 or Numark Party Mix 2), and instead of the Traktor interface use the newer Interface 2 Pioneer (avoiding the conflict between controller and interface aggregating devices), to be able to use DVS the same way you did in the video?
Hi everyone, would be the same work but with DDJ FLX 4 ?
Would be very thankful for the answer
nice video,
Do you think it is a good idea of buying this DJ Controller and have a converter in between to to convert the RCA to XLR to have a balanced and better sound quality?
One thing to be said is, im just a starter and googling since almost 1 month and trying to find something good, and also not too expensive . so would be very happy if you can reply.
not possible
for windows?
@priyonjoni Is this possible with the Rev 7 too? I used to own turntables, SL1 & SL2 back in the day but I'm now wanting to try a controller. Also, I like the idea of being able to add a turntable next to Rev 7 for the future.
You can simply add a turntable to the REV7 by plugging it in.
@@priyonjoni Thanks for confirming this as I wasn't able to find anything online. Cheers from the UK 🤛
Nice video! Does this work with cdj 1000 mk2?
Yes using DVS, but why would you do that when there is a jog wheel with full MIDI control on the controller?
@priyonjoni Having trouble getting FLX10 and PLX-CRSS12 to play nice. Will you please make a video?
Do you have a DVS license?
What if i want to link my technics to this unit but do not want to use timecoded vinyl, i just want to use them with my vinyl thai i have and use the other 2 channels with rcordbox ? What do i need to link them please? Many thanks in advance
Won’t work. There is no audible input with this configuration.
Can i use the flx6 mixer to player regular records not dvs thanks
no
Yo, thank you for this! I was wondering how to link the controller as a middle mixer for the turntables. You just unlocked the code for us! 💯🙏🏾🏁
Specifically for the cross fader! Thank you 🙏🏾
No problem!
is it possible to set this up thru asio? I have a PLX 500 im trying to make work on a FLX 10 hooked up to a dac so i can share my speakers with my computer.
Windows does not have a reliable sync for aggregated devices, no matter what the driver.
Possibly related question: Would Serato Pro run on my trusty old Pioneer SB3 if I had a Pioneer XP2 chained into my 16” MacBook Pro? Or am I still stuck with Serato Lite? Thanks in advance!
You can use Serato DJ Pro with the DDJ-SB3 with a paid upgrade.
Thanks, Nice video. How about to use PLX-500 - it seems like to have an usb insterface turntable without Audio 6 ?
The PLX-500’s interfaced isn’t designed for real-time connectivity. It will actually introduce more latency than a proper interface. It’s designed for ripping vinyl into the computer. PLX-500 isn’t really a professional DJ turntable. It’s a playback and vinyl ripping device that takes design cues from the PLX-1000.
hi PJ, can a DDJ sb3 + phase +any turntable with serato works?
i saw you use a CDJ +phase+ light sword (that's dope btw).
i ask this cause i want to use the ddj fader to control the right side and phase to scratch properly.
No it will not work.
Hi, do you know if you can use the 4 channels? like use 2 digital and 2 dvs
Yes
This is AWESOME, thanks for you time and for share this knowlege.
If is possible, may i ask ONE little point? In the video you say to deactivate the TRHU function in the soundcard and software.
IF i wanna use real vinyls in thru mode, is this possible? Or to this setup work, is a must have the THRU deactivate and this scenario using real vinyls is not possible?
Again... thanks for the video.
Full support.
It will not work. It will only work if you have the interface plugged into a mixer where you’re using the interface’s individual output for each channel. That’s not the case here. The DJ software has no capability of “pass-thru.”
Wooow just what I was looking for, I already have the flx 6, and now im learning to use turntables, but I can't find the traktor audio 6 available :( another suggestions/alternatives?
Thanks!!!
Have you tried eBay or reverb?
Hello there Pj, 1 quick question... i got ddj flx10 running with RB... is it possible if i wanted to connect with PLX 500 and straight away use the turntable (plug and play). Hope to hear from you soon. Thank you in advance
You can use the turntable but you will need the following:
Rekordbox: upgrade to Creative Plan
Serato: upgrade and activate to DVS expansion
Hey there thanks for vid. Wondering if you have a guide about connecting turntables to a FLX 10 as well. Because whatever i do i can only hear sound on headphones and no sound output either via usb-c, master and booth plugged into my PC (no mac). Thanks!
It requires an add on for DVS, did you activate it?
@@priyonjoni you mean sub on recordbox? Yea I got core plan. Turntables are technics 1210 mkiii
Using this method would it allow you to play your records on the turntables or are you just controlling the track that’s loaded in rekordbox with them? If this makes sense lol
This method does not allow you to playback direct audio from the turntables.
@@priyonjoni thanks for the video and fast response 👍🏼
Can you help me please I want to start djing but need help before I start
For sure! Check out digitaldjtips.com . One of the best resources for getting started.
so in theory you can do this with cdjs to create a 4 deck link withouth having to press 3 & 4 on the flx 6
It's not a theory. Its definitely a main function you can do with many 4 channel, and 4 channel capable controllers.
@@priyonjoni I never knew that to be honest mate.
Im still breaking into the new tech, although im 31 I have been oldskool for years on vinyl and standard cdjs.
Only had new equipment i.e flx 6 since 2020, before that i was using pioneer cdj 100s with a gemini 626 mixer for some time so im new to all this techy stuff 🤣
Does it also work if you use it with Windows and don't connect turntables but CDJs?
Whether Mac or PC, CDJs are easy because you can simply add them to deck 3 and 4 using HID mode. Both DJ software will easily support this.
@@priyonjoni i have an Windows PC , sorry i mean xdjs 700.
@@priyonjoni I would like to use this via USB stick and not via USB to the PC. Since these then do not display any waveforms.
It's not possible because the DDJ-FLX6 does not have a full mixer with inputs.
@@priyonjoni ok thanks for your trouble, but wouldn't it work if i put the Traktor Audio 6 interface in between?
Good content
how can I do this with my DDJ-800 Rekordbox, on windows 11
If there is a reliable way to aggregate devices AND keep them in sync on Windows, then it’ll be possible. I could be wrong, but at the current moment, I don’t know of any reliable utility.
anyone know how to do this on windows 11?? :)
The issue with windows is that there is no effective way to aggregate multiple devices and keep them in sync. This goes for both native or 3rd party method.
Dommage je comprends riens 😭
😮😮😮🔥🔥🔥🖤🖤🖤
to bad a mac goodbey