just found your video after watching so many beginners' friendly videos and this is the first video that really helped me understand. thank you so much for sharing. :)
I just got into machine embroidery over a month ago and had been failing with the meticulous Inkscape/Inkstitch software. So I got into Hatch with the trial recently and it's wonderful seeing your video to help me get past the learning curve quicker. Can't wait for my flying pikachu design to come out! Thank you!
Thank you for walking through your thought process and how/why you do everything! I'm just getting into making my own designs, so hearing why you're doing what you're doing helps so much. It's so much better to understand *why* something is done, than to just be told to do something a certain way without the reasoning. I'll definitely be checking out more of your videos, and probably revisiting this one at some point I'm sure.
I really thought I was the only one out here embroidering Yu Yu Hakusho. 💯 undeserved Fandom 😆. Nice work this stitched out perfectly, definitely the most informative tutorial on digitizing on all of RUclips. Well done 👏🏾
I'd love a video on more of the hatch settings, and before you export. How do you get your workspace view setup, prepping artwork for digitizing, matching your digital colors to your thread colors.
Your videos are so good. I made a few designs and they come out clean on one side but the other side the line work is off. I would think hooping is the issue but why only 1 side and across multiple different designs. Any ideas anyone ? Also didnt layer it like you had said to (Color followed by the outline)
I just recently got into embroidery and this video was really helpful. I want to buy hatch but it is a good amount of money. Should I buy "Hatch Embroidery Composer 3" or the cheaper "Hatch Embroidery Personalizer 3". What do you have?
Even with built in pull comp on hatch, my designs end up with my tarami embroidery not lining up with the outlines and I always have to do trial and error increasing the objects for manual pull comp, and stitch it out like 5 times with little changes before it comes out right. Do you have any tips for getting it perfect the first time? I have a babylock flare so probably not the machine
Hello thanks for your video, it helped me a lot! I have another question, how do I insert Japanese characters? Normal letters work but Arabic/Japanese... not :/
16:28 a am experiencing this problem right now I don’t know how to hide it and to make the eyes and other facial features show after I do the face part so what button do I need to press to hide it and put it back..
@@sakuraapparel4898 welcome, it’s indeed. Been looking for tutorial like this using hatch and with anime sample and your the only so far been doing like this
Still feel like mine looks super sloppy could you do a tutorial on something with a little more detail even on a 4x4 hoop don’t know what I’m missing, as well when I actually did my one design my bobbin came through fully but not on any other design so it’s not my tension… Anyoke know?
This is a super tough question:/ short answer is I don’t know! Long answer is it could be a number of things you can do before trying to asking a technican near you. If you fixed the bobbin, have you looked into the cleaning your machine? Sometimes, lint can get into ANYWHERE even past just your bobbin case. Another quick solution is your thread. Is the thread you’re using the correct weight? I use 40wt so it’s a good weight for my embroidery. Too light might not work with my designs. And too heavy might be too tough for multiple layers. Also! Some machines require good BOBBIN thread. Each machine requires certain bobbins. If you’ve done all those steps, then maybe it’s time to service your machine. There are some more solutions but those could be it.
Good day! I wanted to go for the hatch software too but there was 3 options for me on their website. What should I get? I'll try to digitize anime too. Thank you.
Is hatch like ink stitch and embroidery software because I’m using ink stitch and mysewnet and I don’t like my sew net I was looking at drawings x and embird and I was thinking of mybe embrilliance with ink stitch or ai the only problem I have with ink stitch is the error mesg and the lag sometimes
@@sakuraapparel4898 thank you.. at this very moment I’m watch this video and this video is really helping a lot I’m new this who hatch embroidery thing and your making it way more easy for me much respect fam ✊🏼
just found your video after watching so many beginners' friendly videos and this is the first video that really helped me understand. thank you so much for sharing. :)
I just got into machine embroidery over a month ago and had been failing with the meticulous Inkscape/Inkstitch software. So I got into Hatch with the trial recently and it's wonderful seeing your video to help me get past the learning curve quicker. Can't wait for my flying pikachu design to come out! Thank you!
It’s free so that’s the greatest thing about it but it definitely doesn’t work as well as Hatch. I’m glad my tutorial helped:)
Do You stilul use hatch?
Still*
@@__3duard0212 me? Yeah I do
I know I’m late to this,
But i just wanted to ask whether you have the premium or you just using the free trail?
Thank you for walking through your thought process and how/why you do everything! I'm just getting into making my own designs, so hearing why you're doing what you're doing helps so much. It's so much better to understand *why* something is done, than to just be told to do something a certain way without the reasoning. I'll definitely be checking out more of your videos, and probably revisiting this one at some point I'm sure.
I really thought I was the only one out here embroidering Yu Yu Hakusho. 💯 undeserved Fandom 😆. Nice work this stitched out perfectly, definitely the most informative tutorial on digitizing on all of RUclips. Well done 👏🏾
I was so geeked to make this! I’m glad you liked this! Let me know if you have any other questions! I’d love to help.
@@sakuraapparel4898 honestly one of the things that is holding me back is polo logo placement. I'm a perfectionist and I need a system lol
I learned so much here! Way better than that old lady on hatch lol
Awesome tutorial! Thank you for taking the time to explain everything so well!
this is the best video i've seen so far! i feel like i understand it and i'm excited to try tomorrow
What's this called office software
I'd love a video on more of the hatch settings, and before you export. How do you get your workspace view setup, prepping artwork for digitizing, matching your digital colors to your thread colors.
I love the idea! I will definitely make that next video
Hey Dear we are providing you embroidery digitizing and vector art services
you need digitizing services?
Hey Dear we are providing you embroidery digitizing and vector art services
you need digitizing services?
Great video very informative thank you so much. I appreciate what you’ve done This is exactly what I needed.✅ 🙏🙏🙏
Thank you so much for this detailed video! So helpful.
New sub, slowly learning to digitize with Hatch.
Such a detailed video, awesome tips.
Perfect video. Thanks 😊
Nice! I just followed you on tiktok you have great stuff!
I appreciate that! Thanks so much for the follow man. ☺️🤘
Thank you so much! I appreciate the clear explanation!
What a great video! Thank you very much
Thank you so much for sharing your knowledge 🙏🏼 truly appreciate it!!
You’re welcome!!$
Good tips, thank you.
If you want hide the artwork press D and for the embroidery press S and press T for True view .
Great vid thanks for sharing
Thank you for sharing!!!!
Does Hatch come with an auto digitizer? Also would a brother SE600 be able to support so many over stitches?
Thank you for the video!
when you drag the thread colors onto the same sequence, won’t that make a lot of running threads overtop of everything?
I have Hatch 2, is there a keyboard short cut key to hold down while digitizing to change nodes to curve as you digitize?
Excellent video and I have a question, how much was the cost of that software you use?
Your videos are so good. I made a few designs and they come out clean on one side but the other side the line work is off. I would think hooping is the issue but why only 1 side and across multiple different designs. Any ideas anyone ? Also didnt layer it like you had said to (Color followed by the outline)
I just recently got into embroidery and this video was really helpful. I want to buy hatch but it is a good amount of money. Should I buy "Hatch Embroidery Composer 3" or the cheaper "Hatch Embroidery Personalizer 3". What do you have?
Even with built in pull comp on hatch, my designs end up with my tarami embroidery not lining up with the outlines and I always have to do trial and error increasing the objects for manual pull comp, and stitch it out like 5 times with little changes before it comes out right. Do you have any tips for getting it perfect the first time? I have a babylock flare so probably not the machine
where can I find a good digitizer? I need some work done of some intricate images
Hello thanks for your video, it helped me a lot!
I have another question, how do I insert Japanese characters? Normal letters work but Arabic/Japanese... not :/
hello sir , what software did you use sir ?
How do u upload that image on the software
Can I know which package is the best from Hatch for a beginner ....i mean a suggestion
Hi, when you combine the thread with the same color, how do you merge them?
Hey Dear we are providing you embroidery digitizing and vector art services
you need digitizing services
16:28 a am experiencing this problem right now I don’t know how to hide it and to make the eyes and other facial features show after I do the face part so what button do I need to press to hide it and put it back..
Hey Sakura, if you accidently do a left click instead of a right click, how do you backtrack that single click without having to click esc?
You click back space
I’m having a hard time with overlapping I trying using the auto hole and the fill is big what settings is good for that
Is embrilliance essentials a great software for digitizing? Becuase I can't install hatch for mac, its unsupported :(
You can install parallel and you can run hatch on it
Thanks a lot man, you help so much.
How do you match all the colours to one layeR? I tried just dragging but it didn't work, is there a hotkey?
If you press the arrow buttons on the bottom, it’ll move the sequence of the colors
Do you need copyrights for anime embroidery?
How did you delete the back ground
nice tutorial bro
Thank you so much for your feedback:)
@@sakuraapparel4898 welcome, it’s indeed. Been looking for tutorial like this using hatch and with anime sample and your the only so far been doing like this
@@darylnuera4914 that’s awesome to hear you say that:) let me know if you have any other questions! I’d love to help
thank you
What version should I buy for this tutorial? Is it the Digitizer?
Still feel like mine looks super sloppy could you do a tutorial on something with a little more detail even on a 4x4 hoop don’t know what I’m missing, as well when I actually did my one design my bobbin came through fully but not on any other design so it’s not my tension… Anyoke know?
This is a super tough question:/ short answer is I don’t know! Long answer is it could be a number of things you can do before trying to asking a technican near you. If you fixed the bobbin, have you looked into the cleaning your machine? Sometimes, lint can get into ANYWHERE even past just your bobbin case. Another quick solution is your thread. Is the thread you’re using the correct weight? I use 40wt so it’s a good weight for my embroidery. Too light might not work with my designs. And too heavy might be too tough for multiple layers. Also! Some machines require good BOBBIN thread. Each machine requires certain bobbins. If you’ve done all those steps, then maybe it’s time to service your machine. There are some more solutions but those could be it.
Hey Dear we are providing you embroidery digitizing and vector art services
you need digitizing services
Hey Dear we are providing you embroidery digitizing and vector art services
you need digitizing services
how did you merge the colors together to be on the same one?
Good day! I wanted to go for the hatch software too but there was 3 options for me on their website. What should I get? I'll try to digitize anime too. Thank you.
Hatch 3 digitizer , the most expensive one
Nice, what program do you use?
It called hatch! It’s a great beginner software
@@sakuraapparel4898 Is there any free alternatives I could use? I've checked it out and it's very expensive.
@@sp_watersweep you can look up Inkscape plugins that do digitzing too! I’ve seen them before and they work. It’s free
@@sakuraapparel4898 ok I'll check it out. Thank you for the suggestion
@@sp_watersweep no prob:)
bro can i know the software
i made a rose design buts there are gaps in between. how can i fix that
Can you send me this software link?
Is hatch like ink stitch and embroidery software because I’m using ink stitch and mysewnet and I don’t like my sew net I was looking at drawings x and embird and I was thinking of mybe embrilliance with ink stitch or ai the only problem I have with ink stitch is the error mesg and the lag sometimes
I got hatch and it’s better than I thought I love it
When i used the hatch program it skips some colors or part of my design
which package did u buy?
How do I export on a usb ?
Is hatch compatible with MacBook? J really want to get into digitizing embroidery and I have no experience?😅
I think so! I’d double check their website, but I don’t see any reason why it wouldn’t! Let me know!
Nice
Thank you:) I hope you liked it
I bought a few embrilliance software mainly for digitizing but when i saw hatch software i kinda regret buying embrilliance.
Hey Dear we are providing you embroidery digitizing and vector art services
you need digitizing services
❤️
I appreciate the feedback! Have a good day
Hello dear friend, how can I contact you?
How can I remove an error in my work I was doing a square outline and I messed up
Either delete it or press H (then DEL)to move the nodes around.
@@sakuraapparel4898 thank you.. at this very moment I’m watch this video and this video is really helping a lot I’m new this who hatch embroidery thing and your making it way more easy for me much respect fam ✊🏼
where to buy your anime design
this one was a commission. the client provided the image themselves.
Is Hatch free?
im really confused on exporting my desing since on the machine it changes the colors and sequences
If the machine export you chose is correct then I’m not really sure why? That’s never happened to me, that might be something different
can i have the pes for this lol
Sar mujhe Emrodery software chahie please help kijiye sar
Great video but would have been better without the music.