I Tested Viral Slab Bending
HTML-код
- Опубликовано: 11 май 2024
- I Try Bending A Slab
Thousands of you wanted me to test this one. So we did....
Shop Shades NOW SHIPPING - bit.ly/ShopShades_YT
LIVE EDGE MASTERCLASS - bit.ly/JM_MasterclassLanding
Save $50 CODE: BENT
Check out the original Benders from the Netherlands - bit.ly/JM_BendingWoodIG
Watch me test more crazy builds!
I Tested Viral Folding Furniture - • I Tested Viral Folding...
I Build My Editors Dream Desk- • I Build My Editors Dre...
I Build A $30,000 Table - • I Build A $30,000 Table
I Build Another Impossible Floating Cave Table with AI - • I Build Another Imposs...
Building An Invisible Whiskey Cabinet - • Building An Invisible ...
➤OUR MERCHANDISE - johnmalecki.com/
➤WOODWORKING PLANS - johnmalecki.com/collections/d...
➤TOOLS & SUPPLIES WE USE - hwww.amazon.com/shop/john_malecki
Proudly Supported By:
Timberland PRO - bit.ly/JM_TimberlandPRO
Oneida Air Systems - bit.ly/JM_Oneida
Lincoln Electric - bit.ly/JM_Lincoln
Total Boat Epoxy - SAVE 5% : www.totalboat.com/MALECKI5
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishs - bit.ly/JM_Rubio2021
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
#viral #testing #woodworkingtrends 
Хобби
Here’s the fix needed: An apology video to Sam.
I watch
EDIT: The video has been edited to cutout all the parts where John digs into Sam and edits removed dunking on him. I'm glad the changes were made. I wish it was acknowledged in some way, but I'm glad. Thanks to the team 👍
Sam getting dunked on the whole video sucks. Especially digging into him for not catching a 300lb slab getting married to gravity. Damn.
Supposed to be funny. They have a good laugh about it
Define: Facetious
@@AAK007 There's trying to be funny, and there's being mean spirited. The fact that so many folks are sticking up for Sam is proof.
That's how friends treat each other.
@@KB3AOL When you say it 2 hours later after you've cooled down, it's facetious. When you say it immediately in the heat of the moment it's mean spirited. I don't doubt they're friends and they're probably fine....but I would have liked to have seen resolution in the video showing as much. Sam's face afterward sure looked like he was feeling like John was pissed at him.
Editing the video to remove the abusive comments towards Sam (as well as when John basically asked Sam to kill himself, in what was the worse shop safety I've ever seen) without an apology comes across as an attempt to hide it. This way there is no evidence of the abuse and John can easily brush it under the rug instead of actually doing better. This is what serial abusers do. You can bet the Sam is still getting yelled at and dunked on, you just won't see it now.
The reactions from John aren't jokes, that's pretty clear. You don't edit out a bunch of "jokes" like this. When someone gets called out and they hide what they are being called out over, it's not progress.
You can't be a better wordworker John unless you fix your mistakes, instead of just hiding them all the time. The biggest mistake you made in this project was having no fucking plan. You clearly had not sat down with the team to go through the steps of the slab. That's what the guys in the video you watched do, not just scream at people when they can't read your mind. 90 percent of running a good shop is planning. You're not running a good shop.
wow, dodged a bullet on this channel.
outta here
I only saw the cut video, and even I thought, "Man, he needs to lighten up. What an abusive asshole."
I can't imagine what the original video showed.
Been peed off long ago with this guys bully, crass behaviour. Unsubscribed then it came back on again. He has no backbone as a man.
Came here to pretty much say this. Being the boss and being unprepared. Then yelling at your guys because you didn't make a plan and things went sideways. That makes you a bad boss.
I am an example of what happens when the person "catches it." (and this was thought out in advance by the boss but poorly)Two of use were taking directions from my boss (coincidentally named Jon) at the time at a popular children's museum in CA. I was new at the time so I didn't know much about the boss and trusted him. We were unloading an exhibit from a concrete loading dock and he said he would tip it over and the two of us could catch it because it was "light". The two of us could not tell either way by looking at it. When the Boss tipped it over it was so heavy that it slipped through the hands of the other guy across from me who was in his 60's. I was younger and stronger and managed to get ahold of it. Long story short It jerked me down to the floor and jammed 3 of my vertibrae together grinding part of them away and pinching nerves in the process. It turned out the exhibit weighed almost 450 lbs because they had put lead bricks(yes they exist) inside to weight it at the bottom. IN this case he blamed me for deciding to catch it when it slipped through the other guys hands. Over the next 2 months I lost the feeling in 2 of my fingers in my dominant hand, had severe neck pain and it heavily effected everything from my work to how I slept at night. Yes there was physical therapy and medical covered by the jobs but I will have pain for the rest of my life and there are chunks missing from 2 vertibrae and permanent nerve damage. Even as I type this one of my fingertips can't feel it when it hits the keys. 6 mos later I was fired for failing to meet work performance reviews. I went back to working for myself and have been happier ever since. When someone else is in charge of your safety they need understand what this means. Don't be a John or a Jon.
My grandad passed in 1985 sadly and a few years earlier he gave me some advice that's lived with me ever since. He said, "if you drop something let it drop, you can do more harm by trying to stop it!" Wise words from a wise man. I'm sorry John but the health and wellbeing of your employees is paramount over anything else!!
I always say "a dropped knife has no handle" Clearly that slab was heavy, and could have damaged anyone under it or trying to grab it.
Plus now the project will be 2 episodes instead of one! :D
Exception: babies
Your grandpa def lived before cell phones cuz I've fumbled and snatch saved my cell phone prob a dozen times.
Oh and yea one of my kids once too
Epoxy
@@yeahitskimmelyour child is not 300 lbs thp
As someone who has run teams from five or six to over a hundred people in the past, I agree with the comments that you need to apologise to Sam, and not just for the bit about stopping the slab, when your immediate reaction should have been "Are you OK? I'm glad you didn't do anything stupid like trying to catch it". In fact, you should have planned for something like this and told your guys quite clearly "if it starts to go, just get the hell out of the way". You should also avoid throwing tantrums like that in front of your staff. Obviously what happened was heartbreaking, but as the leader you suck it up, make sure everyone else is OK, then throw a fit in private, not in front of your team. I appreciate it might be good content, but it's not good for you as a leader or for your team.
A good manager always puts the welfare and wellbeing of their team first, especially in a potentially dangerous environment like a workshop and, quite honestly, Sam already looks like he's scared witless of you. I'm a big guy too, and we sometimes don't realise how imposing a large, confident man can be to those around them, and while you are probably just joking, it really doesn't look to me like Sam finds it funny. When you make people nervous and jumpy, that's when accidents happen, which is exactly what happened here. You constantly badgering your team to hurry up and mocking them for being slow lead to mistakes being made with the result seen in the video.
You're former NFL, I'm former army, we spent a lot of time in environments where such "banter" is seen as normal and you give as well as you get, but a lot of "normal" people don't see it the same way and you really might want to consider that. It's entirely possible Sam's totally OK with it, but that is not the perception that your videos put across, and as a wise man once said, "it's not what you do that's important, but what you're seen to be doing" and, frankly, you're coming over as a bit of a bully. People don't quit bad jobs, they quit bad managers.
Have to agree!
Sam said "I'm scared".
OH HELL YEAH...........YOU NAILED IT STEAMGEEZER
Good articulate comment!
as someone who has full on walked out on a bad manager - I concur (I'm not yet at that part in the video but seemingly from the comments I can piece together what's 'going' to happen) - being treated every single day I worked at that job like I was the shit on the sole of his shoe wore me down like nothing else. He was a disgusting person (not just as a manager but as a person) and expected everyone else to clean up after him - I was NOT hired as a cleaner, I was hired to digitise all of his accounts (he was an accountant), which I did as a casual worker but when he started taking the p*ss by getting me to clean up his *literal* shit in the toilet, his *literal* condoms he left on the office floor and the fact that he would routinely call me every derogatory name under the sun on a daily (hell, hourly) basis - I told him to stuff his job and find someone else to do it because I was done and walked out. Now I get that's not quite what happened here (at least, from your comment) but I agree that people don't quit shitty jobs, they quit shitty people (who happen to be managers) and I've noticed this trend in JM's persona for the last .. few months videos, it doesn't really come as a surprise to see people - essentially - having had enough of it on another's behalf.
"Dramatic content" shouldn't over ride the need for human decency. Regardless of your individual background where "banter" may or may not be "normal".
edit: I got to the part where it happens and it full on gave me anxiety, I'd have walked out (as Sam) and pondered my career choices. He said "I'm scared", I said "I'm terrified" and I wasn't even there (not to mention, we only saw the EDITED version, which I think scares me more because what else went on that we _didn't_ see?)
He edited out the douchebagery?? He was rude to Sam the entire video and then shouted at him for not catching it when it fell, and now all that has been edited out. That's really shady man
How would you know that if it’s edited out?? Trying to catch you I’m just trying to understand.
I saw the video when it first came out. You can see from all the comments how much backlash he got, then he went and edited it to make it look better
@@kingconcookiethat’s weird asf but even with the edits he did come off as rude yelling at his employees every time he was stressed
Even after the editing..... I would not want to work for this guy..
First time viewer, so I am going to give my 5 cents worth!
I have managed 100's of staff members and I have never spoken down to any one of them like this. He may be a talented fella with the wood, but his management skills leave a lot to be desired. In Australia, if he'd had spoken down to a person like he did, a man or in some cases a woman, is gonna drop you on your ass! He swears consistently, and has anger issues. At the end of the day, the only thing one can be in control of is ones own attitude. I'd never subscribe to a channel like this, I do not understand why anyone would!
So, for those who are watching the video now and don't know why people are saying John should apologize to Sam:
After the slab falls, by the end of the video, John says "didn't you even think of catching it" to Sam. The he throws a fit and doesn't say a word for two hours apparently.
He cut off the part he said that after he got huge backlash in the comments.
Once the video is posted, you can’t really undo that correct? You’d have to post a whole new video and then these comments wouldn’t be here
@@mikej5959 you can edit out parts of the video like he did, but the comments aren't changing.
@@paula5540 because editing it out isnt the problem lol. Toxicity towards your employees and sugesting someone should throw themselves in front of a 300lb piece of wood is the problem. it's not that hard. whats not to get?
Thank you, I was wondering what happened. I'm not subscribing to his channel because I dislike abuse towards employees.
I was watching the video right now and at first quarter of it i was like "why the f is this main dude being so abusive towards his workers? Why is he such a douche?" and it kept getting worse and worse with his comments. Not to mention how bad he planned everything and then condescendingly gave out comments to hurry and stuff. He obviously didnt have a plan so his workers couldnt even hurry to do something that hasnt been planned for. Then i see these comments like yours mentioning there was even more abuse edited out. WOW this main guy is definitely an abuser and you can tell both of his workers dislike him.
I would have gotten mad at my employee if they had actually tried to get under that falling table
Yeah.
"Don't die" should be a reasonable policy in any shop.
I guess he feels the same , but it was a spur of the moment thing to say.
I build expensive custom displays for stores. I tell all my guys, if something is falling, get out of the way. We can build a new display but it's hard to build a new you.
It's a bunch of dudes in a shop. It's all good.
No doubt, at the end of the day, he knows dodging was the right move.
In the moment however, it's like "WTF man!? All ya had do do was jump on the grenade!" This is just how blue collar men communicate.
@@ck_sidekick8306 Sure, but they could have chosen to edit the video in several different ways, and this choice made John look like a bit of a dick.
"I used to be an offensive lineman in the NFL".
Now he's just offensive to his staff.
Funny, search him up and it looks like he never made the starting NFL line up. Just stayed on the training roster
Piss poor planning. I feel bad for the guys trying their hardest to please boss man.
yeah, why is HE the "muscle" holding up the end when HE should be the one putting on the clamps and squares? Why didn't they take a long clamp or even a cable from one end to the other to apply the force? POOR planning for sure. And with a steam bend, if it doesn't work, then how do they get it back in the steam box? they should have let it sit in the box quite a bit longer if it felt too stiff. And once they found that the blade didn't have enough kerf, they should have gone in there with something, (even a sharp chisel!) to ease those inside kerfs. putting the glue in afterwards is not going to be great either
FYI: Editing the parts out where John was being a total asshole does not make John not an asshole. Hopefully John has learned to be a better person after the feedback from the original video, instead of just making sure the asshole parts are edited out in the future.
" You didn't even think to try and like stop it" ... I BEG YOUR PARDON?
Sam (?) would have been squashed , it was good he jumped out of the way, sad for the table but good for the person
Im glad this is #1 comment, owes that kid an apology
Even John would have probably been on the floor, maybe not injured, but on the floor for sure. Sam was even holding the guide... Guide + heavy slab sounds like something bad
Stitch it
Things said in the heat of the moment tend to not be fueled by logic, he clearly doesn't blame them for not catching it, as he said, shit happens.
Jhon being flattened in the comments harder than Sam would've been irl if he tried catching that table.
unsub for Sam!
Did they edit the video cause I didn’t hear him say anything about catching it
@@mine6312Something like you didn't think to stop it, or you didn't think to catch it... right after it fell
@@mine6312 HOLEY CRAP YES THEY DID. WOW! The whole sad 20 second bit/ song from 28:40 to 29:10 was changed! Scumbag Malecki stealth edit to make himself not look like a total jerk.
I believe his actual quote to Sam was, "you didn't even try to stop it?", but when this dude edits it out....
John, Im seeing the edited video but from the comments I gather you gave Sam hell for not thinking to catch the table. He definitely thought to catch it as you see his hand go out to grab it but smartly realized there was nothing he could actually do. You however are the one who dropped the table. The first time it was clamped up, the table was a bit higher and you stayed up there. This time, the table was lower and the split second you put your weight on the table is when the clamp shot out. You need to address Sam's good decision to let the table fall, safety first. As you said, you have 2 slabs. You only have 1 Sam.
this comment is way too undervalued! this should be top comment
John is good at finding ways to cover his mistakes. They edited the original video. So, I guess we can just all forget how he treated Sam. All good now john!
As the owner and boss of my company , I've learned a very important lesson watching this video , then reading everyone's comments. I have got to be a lot more careful with my attitude and planning.
I typically do not care about falling objects versus employee health . Let it fall , I have insurance for that . But boy can I get worked up when my team is in a tight spot and we are in the super crunch type situation .
I have got to be far more patient and develop my mentor attitude alot more .
So to everyone who posted concerning that one situation , thank you. I'll take some lessons from it for my behavior , perspectives , and how and when I say things.
It's always easier to see and understand somebody else screw up than yourself!
I agree, it's easy to see the faults in others but it's not easy to see your own. When I was in training to take over an auto parts store when I was 20, I came in with the store manager at 8, first thing he said was that the rug was dirty and the pop cooler was low. The kid who opened at 7 mentioned that he was the one that closed last night alone, on a truck day when we're supposed to have 4, and that he stayed late enough to get the brake rotor pallet put away, and left right after because he had to be back to open... Manager and him had a back and forth where the kid finally said "You always point out the shit we miss, but you never notice that the customers love us and we break our backs because you can't schedule enough staff" kid ended up walking out. I took over the following week and made sure I got him back, made it very clear that if they get busy that they can call someone else to come and help or to call me and I'll come in. That kid took over when I left and last I heard he was taking classes to become a District Manager.
Or, take people on the internet for what they are and don't give a singular shit about their faulty uninformed opinions?
The dynamic they have "on screen" and off could be completely different. What they choose to edit and show us does not show the WHOLE PICTURE. So take everything with a grain of salt and don't give in to the cancel warriors.
@@GOLD_FEVER brother this has nothing to do with cancel culture. The fact that you're even saying this tells me you've never been in a managerial position or worked at a company large enough where HR gets involved in shit. First of all, this was his idea and he has no real pre-planning for the actual project let alone safety. For him to then yell at them during the stressful situations like clamping was asinine. He even messed up when he tried to take over for clamping. Set aside whether he had the right to get pissed, he's risking his own business with the way he operated. Had one of his workers gotten hurt and wanted to sue its an open and shut case with them recording everything. They regularly violate a metric ton of OSHA regulations but for the most part the injury likely to occur is minor so noone really cares. This one was actual a wtf ridiculous moment.
@@godyamit I don't like Rule nazis and hard asses in general. That said, i don't like people who assume either.
I am starting to think that everybody here reacted to a different video. Because i can't find a single part of this video where anybody is getting mad at anybody.
Let alone taking it out on anybody.
Dude. You were being a dick to your staff through the whole video, and then you get mad at a small guy for jumping out the way of a heavy slab of wood... Edit: And now you try and hide it? Unsubbed.
John had very little clue what he was doing and yet expected sam to know what to do.
Wow, he edited out bitching at Sam for not even "thinking" of catching that slab.
You're a coward, John. Own up to your mistakes and make a public apology.
Edit: He apologized in the next video on this channel. Good.
I'm not rescinding my comment here, however, due to how it looked at the time.
Seeing how he treats this Sam makes me wonder why the last Sam really left.
I wonder as well.
Bad boss: You didn't even think to try to stop it?
Good boss: Is everybody ok?
The other Sam, Jordan... I'm sure the list goes on for people that are not filmed, Think he needs to do some self reflection to stop putting people down that clearly want to do the right thing.
that sam left because he has crazy potential and he actually started doing his own thing, awesome dude, starting a life.
unsub for Sam!
Good job Sam for not getting hurt. I worked 10 years building houses with a boss like that. I quit a few times but he was my brother. You're young and seem like a good worker I'm sure you'll find your own place in the world soon enough.
10 years building houses and your hands are still soft
F** it, Im going for broke and taking out a tooth with me. Workmen's comp should be abolished. Turned us all into a bunch of p****s. If it was me that worked multiple days on it, I would have jump in the way, if I got hurt, let the VA pay my ex-special operator azz medical bills.
@@user-jk9rg9mc9kso you cry about workman's comp being a thing while getting basically the most important benefits of workman's comp through the VA? tell us your a hypocrite without telling us your a hypocrite.
@@GiassThisAt least their brain isn't as smooth as yours.
unsub for Sam!
If he treats his employees like that in footage he approves to be uploaded, imagine the way he treats them behind the scenes when he knows his behavior won’t be shown to the public.
I haven’t seen the video before the edits, but the comments did a good job of describing what happened.
Last video of yours I watch. I have noticed it in other videos but this one was crazy. When you treat your employees like idiots, it doesnt make them want to work harder, it makes them want to look for work elsewhere. How about planning a little bit and setting up the clamps you need before moving a giant slab around. Every single mistake made here was your fault and would have been easily avoided had you assembled the team, explained the plan and asked for input/ opinions. If I were in that position, I would have walked away and let you deal with your own problems. By the way, that clamp setup with an aluminum extrusion was bound to fail, you were clamping on a sharp edge, how about using something flat, anything at all would have been better.
He treats us great man. It’s a RUclips video, take it with a grain of salt. Wish you the best David 🤘🏼
@@Joe.shotit Im glad to hear that. However, when your entire business revolves around public facing content, its all about perception. Im not choosing to boycott this content because I stand with the employees in some heroic act, you are grown men and can make your own choices. Im doing it because its hard to watch. RUclips videos are supposed to be entertaining and fun, sometimes you can even learn something. Watching John act like a child and never learn from his own mistakes doesnt check those boxes. By the way, sure sounds a whole lot like John asked you to do damage control in the comments. For what its worth, I used to work for a guy like this and it did nothing but prevented me from learning and growing as a maker. After leaving and starting my own business I realized just how much I was being held back. This was the first comment I have posted on youtube in probably 10 years which says something. Good luck!
@@DavidBlum425 you’re 100% right public perception is huge for us. But as you know, you can’t make everyone happy all the time. It’s never enough for everyone. So balancing that line will never be perfect, so what you see to you might be too much, and to others be perfectly fine. It is a game that not many people “win” at doing. As far as damage control, you’re the first person Iv commented to and trust me I could’ve commented to many and there’s been nasty ones. Thanks for the civil convo David. Best of luck as well🤝
Apologise to Sam, as you said "shit happens". And he's a tiny dude, might have been seriously injured if he would have attempted to get in the way of that huge piece of wood. GOOD thing he didn't try something stupid and get underneath that slab.
I am the only one, who is pretty sure, John said it as a joke. That he really didnt mean it? Thats why he left it in final cut? Because he thought that people will get it?
@@MichaelSzatmary no, he was serious. He also belittles Sam in almost every video.
John used to play in the nfl, he's used to poeple running into 300lbs not running away, big dudes always poke fun at us skinny guys but he didnt actually expect him to stop it, he would've been paying sam workers comp right now 😂
That thing would’ve definitely injured John if the places were swapped bc his dumb ass would’ve tried to catch it
John was lucky as Sam did not try to stop the slab otherwise it would become a personal injury at work leading to possible lawsuit.
Say hey big dog, I'm a machinist for the second largest countertop shop in the Kansas City Metro area, but even still it's a small business. When shit happens at our snap business, the first thing the Managers check on is the employees, not the slabs or the machines, they make sure their people are okay. That's what keeps employees. Not giving a fuck about your employees mental or physical health while even playfully scolding them about things they can't fix, is a pretty sure way to find another camera man and another shop helper. Nobody wants to get bitched at for being human at work, John.
I agree completely.
Oh give me a break, Sam obviously was fine and I am sure John made sure off camera as well. It is also only human to be frustrated when shit happens.
That thing would have been like a giant flyswatter.
The workman's comp would have cost more than the slab, anyway. It's just wood. Sam is a whole human being.
@@8asw8 Hush.
Try not kill your staff is what you should try.🤣
Editing the video to hide the horrible way he treated Sam instead of being a man about it and addressing it. Very lame choice.
John fucks up after doing sketchy shit: 🤭🤪
Sam doesn’t catch a falling giant heavy table on his own: 🤬😤
💯 😂
If the table fix vid doesn't include a public apology to Sam, I'm out. There's plenty of other talented woodworkers to watch.
Same. And the apology better be sincere, not just to appease the viewers.
A bonus for Sam couldn't hurt for putting up with Johns moods.
Dude, yes, this 10000%. It feels like working with this dude is super super toxic, but he's probably used to people putting up with it because of the YT fame. It's disgusting. Sam, don't let this guy define your worth! You're a talented guy with a ton of potential!
unsub for Sam!
Editing the video to remove everything that you got called out for is Shady AF.
well seeing as they edited out his freaking out on sam, I'm guessing that is the apology.
Editing out the part he mistreated Sam apparently was easier than putting in an apology 🙄
as a matter of fact, YES, the youtube editor makes it very easy to clip out a section of video, you can't add to a video without making a new version and uploading it as a separate video.
The next "viral" thing that you need to test is making an apology video. It's all the rage right now.
As long as he doesn’t sing or play a ukulele he should be fine
John, you're the boss and in charge for others "mistakes". You messed it up, no one else.
POUR IT! I think Sam IS pretty athletic dodging that 300 pound wooden linebacker!
John wouldve tackled it 🤣
It's not dropping on him though it's falling/rolling towards him I'm pretty sure he could have easily held it up.but when you hear the noise and see it move instinct kicks in.
@@aaroncraven07 more like... he was told to stand underneath it while holding a track saw/ seems like his other option was to throw the track saw which it seems (based on the attitudes here) would have put him in hot water too. poor leadership and planning all around. using squeeze clamps and only two? they had plenty of time to clamp properly while setting this up and should have had a protocol for if it went down such as staying out of the way or having someone holding it at all times when it was vertical
**This video has been edited**
I'm just going to say that, John, I have absolutely last respect for you. I never leave post on any video, but this is important enough that I actually felt I needed too. In the original video when the clams failed and the table comes crashing down we see Sam dodging out of the way as to not put himself into harms way. At this point the very frustrated and upset John told Sam ”you didn't this of even trying to stop it?!" And now after all the backlash John has had the video edited to cutout all the scenes that show his lack of character. A really man would one never put others in harms way, would never blam other for a general accident, and most importantly not try to hide his mistakes and cover up how much of a complete butt hole he was. You had the chance to make a response video, you had the chance to make it right by your viewer, but you dropped the ball. Funny thing is i hadn't watch many of your videos in a while just because the whole "doing tiktok trends" wasnt my thing, but i gave this one a shot since ot looked interesting and this is what i come back to. Im glad that the only thing hurt in the video was your pride. Maybe it'll humble you enought to change the way your treat your staff, because from the looks of it you dont treat them with much respect. Maybe you weren't raised right or you just forgot what your mama taught you, but where im from I was always told to treat other the way that I wanted to be treated.
It's not about how people like this are raised; it's about how they learn to handle failure as a young adult. A fully mature adult - man or woman - takes responsibility for his or her actions and decisions. They don't find someone else to blame, and they don't try to hide the result of their poor decision-making when things go south. They accept responsibility freely and without complaint.
John did the opposite. Instead of taking the time and effort to plan out the bend and making all reasonable precautions needed to mitigate risk, he chose to throw common sense out the window and by doing so intentionally put Sam in a dangerous situation. He blamed Sam for failing to work a miracle so he didn’t have to blame himself for having demanded the impossible out of his staff.
The worst part of it is that he seems to think his error here was verbally abusing Sam, ie. hurting his feelings. His actual errors were a) putting Sam at unnecessary risk of injury through poor planning, and b) blaming Sam so he didn’t have to take full responsibility for said poor planning. It's not Sam's feelings that are the issue; it's John's failures. He can't accept that every failure in this video (and in his life in general) is 100% his responsibility and, in this case, 100% his fault, so he tries to make Sam out as the perpetrator.
It's chillingly similar to the modus operandi of domestic abusers, who set their partners up to fail with calculated malevolence so they have an excuse to abuse them when they inevitably fail. They like to proffer tearful "sincere" apologies while erasing the evidence too.
Maybe if you weren't such a dick to your employees they'd be able to communicate better during stressful situations. Instead they're most likely
More worried about looking or sounding stupid just makes things worse.
Boy. Johns's “True Colors” really came out in this video. Didn't they? I understand things getting a little more tense while doing large projects like this one. Honestly, most people do. What most don't do is bag on their Employees while also being passively aggressive. That's a good way to lose Great employees.
John, I think you're a funny, creative, and skilled dude, but... there has been a pattern over the past few vids that make me think something is up. Your treatment of Sam in this video while is horrific, it's hardly the first time. But more so, I've felt like your vids are getting more stressed... It's less fun as a viewer when you abuse your employees. Teasing is fun, fine, and a normal part of a lot of environments. But... bruh. Make it right.
I honestly think this needs to be some sort of rage bait, its that bad. For them to edit it and say yeah this looks good upload it is mind blowing. He took on a project he knew nothing about and seemed like he half assed every party of it, which is fine, but don't expect a different outcome than this. The man is smarter than that I would hope. I have been a subscriber since 2020 and this is a very close second to the video where everything was blurred/censored in terms of difficult to watch.
i have noticed his behavior in these videos too! makes me wonder if the editor is trying to tell us something.
Rather than posting an apology to Sam, you just edited the video and removed the parts that make you look bad. Wow.
i just found this channel today, damn this isn't a good first impression
@@antiestablishmentarianistit used to be a really good channel. The older videos were actually informative and entertaining. Now it seems like each video is just how big of a tantrum can be thrown.
@@ChristopherOBrienPSU yeah, it's weird, it's almost like meeting someone's dysfunctional family, it's just really awkward to watch. obviously everyone here feels really bad for the little guy sam. i get that people have a temper, but this guy almost has roid rage or something. i dunno if i've ever seen anyone get so mad they have to leave for 45 mins or an hour or whatever like that. i mean i know the wood was expensive, but from the very beginning, it looked like he wasn't planning anything, he was just winging it. i dunno what he expected to happen. i'm surprised they even got the first part done right. his style is just so disorganized and haphazard.
Scoreboard John: Owes an Apology to Sam - 5289...John's Hissy Fit - 3...
Especially after he JUMPED OFF A LADDER ONTO HIS KNEES TO CATCH A BEAM Jesus man you gotta check yourself
The beam catch was truly awesome. Give Sam a raise.
What video was the beam catch
@@sirmilesspitzoodle8929 one or two weeks ago, I think it was a home build
2 little clamps on a metal bar stuck in there sideways that was always going to let go. That's on John 100%. You can also see Sam wasn't really looking at it when it started to fall. He was also holding that track. Good job Sam. Fuck that slab. Don't be a dink John. The kid signed up to work in a woodshop and he's jumping off ladders and dodging huge slabs.
My guy John didn't even think to do a wiggle test on the clamp. I was so confused when he stepped away without one and yep, there it goes...
I came back to see an apology video and find that you made your editor go back and "fix" that part.... Crazy. Editor probably got yelled at for keeping that part in too. Now what would your sponsors think. Smh
Even if Sam wasn't holding the track for the saw, the thing fell in an instant. 'You didn't even think to try and catch it?' No, he didn't think at all. He reflexively reacted in a split second and made the correct decision to save himself from serious injury or worse. And to even have a chance of catching that thing safely you'd have to be a huge mfer, with free hands, in perfect position, and also not have the human reaction of jumping out of the way of huge, heavy things falling toward you very quickly. Maybe don't rely on a couple of small clamps below the center of gravity of an object that weighs hundreds of pounds that you have standing on end? Maybe don't blame your employees for executional/planning/managerial issues.
Not to mention john weighs at least 250 and he literally JUMPED on a table that has a peice of a tree clamped to it but its sams fault it broke!!
@@dustinlalonde8460where did you see him jump?
@@brandonjohnson7559 u did u watch the video???
@@dustinlalonde8460 yeah I did, go watch it again. When the table fell he wasn’t even on the table.
@Vernoningram I concur.
Sam was right to step aside. Trying to catch that falling slab could have seriously hurt him. The man lived after falling from a ladder, whilst saving your wedding photos. Give him props.
Anyhow, I would suggest using a steel frame on the front side of the desk to help hold it in place. You could add a Malecki logo to the steel also. On the back side, I would consider another steel brace that also incorporates a couple of drawers for the desk. Stay safe, fam.
unsub for Sam!
Homeboy really made a video where he comes across as a huge prick and still uploaded it.
Actually insane that they edited this together and still thought it was a good upload. I wonder how much abuse doesn't get caught on camera or is edited out from the start.
This video has been edited. The original Sam took blame for. not catching the table that outweighed him by 100lbs.
For 40 years I have been a commercial carpenter. On one of the largest commercial construction sites I worked on, a tower crane tipped over on a 60 story building. Caused tons of damage as you can imagine. Not one person got blamed or yelled at or asked, "why didn't you catch it?" The first words out of everyone who witnessed the accident was is everyone OK??? No concern was given to the damage cause by the cranes collapse. All that is replaceable - LIVES , FRIENDS, and FAMILY are not. No one was hurt. Everyone went home to their families that night.
Stitch it! Also, you owe Sam a public apology. Ain't no way he could catch that ,he's a tiny dude, might have been seriously injured if he would have attempted to get in the way of that huge piece
Sarcasm detection is pretty hard, but I feel confident my detector wasn't broken during that video
Tiny dude or 350lb dude you let that shit drop. No way anyone should be trying to catch that big slab while it was in motion.
Doesn't matter how big you are, it's never worth getting injured to protect your boss's bottom line.
@@Mount56 Public opinion is that your detector is very much broken or in need of fresh calibration.
@randomname4726 public opinion is typically so soft these days that they are bound to be offended by something, doesn't mean they're right.
John DEFINITELY owes Sam a Major public apology for that SHID!!! He already belittle hims in almost every video 😤😤
the slab is overshadowing the earlier clamping dig.
An apology needs to happen. Doesn't need to be public, it happened between them not us.
@Kat-zk6qy John's tantrum happened "with us," so should the apology.
I would go crazy if my boss was yelling at me all the time
I think my favourite part was when that long clamp was apparently broken, and John says "I know who did it", so basically he knew he had a broken tool, knew who broke it (supposedly) and did nothing to remediate it, just bringing it up the moment said tool needs to be used.
As someone who works in the quality field, that's exactly why you pay attention to quality, processes, checklists and all that boring crap. I know it's a small shop, I know it's boring stuff, but it can save not only money but potentially lives. Rattly old clamps can kill.
This isn't definitely just a John Malecki thing, many youtubers I follow also appear to work in a very sloppily managed shop, which ends up being unsafe even if you have all your PPE and ShopShades and stuff.
Sometimes the most dangerous thing isn't a 1960's 16" radial arm saw; it's an unchecked box in a manifest or a "fix this asap" post-it note getting lost.
I like that no one cares about how to fix the table and are just shitting on John’s behavior, he deserves it in this video. Lighten up dude. Put together a better plan before just stressing out your guys.
things fucking up is why we watch. football player likes wood. lol
him jumping in and not putting a plan together and prepping people beforehand was really hard to watch, setting people up to fail is not good.
@@customecraftycarpenting7471 if you enjoy watching people fail and drama unfold you must have a very unhappy life. I watch to see creation take place and hopefully learn something from a well laid plan. Anyone entertained by drama usually enjoys it to justify their own drama, or they’re just twisted people.
Agreed - I have a shop and although I like the projects in his videos I find his planning painful and employee treatment painful to watch. These are related - one trickles down from the other. Part of being good in a shop is not just getting better with your hands and probem solving but all your boss skills including how you organize, interact with employees think about safety while doing so. After all the videos and projects that have been made John seems to have no concept of this until all the viewers have to point it out to him
@@carpenter1138 The other issue I noticed when they bend the first leg is he's trying to do it and doesn't have any ability to direct anyone else since both his hands are in use and he's busy. would have been loads better if he instructed someone else to do that so he could supervise and direct. or again explain beforehand and give everyone tasks and explain what would be required of them.
That reaction when it broke wasn't right man ur employees safety should be your #1 priority in moment's like that
Coming to the comments section to see if more people are commenting "Stitch it" or "Pour it."...Free.
Finding out that nobody cares and everyone is (justifiably) pissed at how John treats his employees...Priceless
This workplace is so toxic, lmao. It's so fun to watch.
Banter can only be called such when it's a two way street. When it's not a two way street, it's called abuse.
this was not a two way street.
Also, expecting Sam who's about 1/4 the size of John to "try to catch" that monstrous slab in order to "save it" is moronic. At best you've got an employee with broken bones. At worst, you're planning a funeral. Joking or not, that's not right. On any count. No one says "I'm scared" in that small of a voice unless they're honestly rattled and honestly scared. I was *terrified* and I wasn't even there. Not to mention the entire video triggered my PTSD and anxiety through the abuse John was hurling at his employees - as I've gone through abuse like that as an employee (in a different line of work) that still affects me now (clearly). No one deserves to be treated like that, spoken to like that, especially when the boss himself doesn't have a clue what he's doing and has no plan.
Be a better human.
unsub for Sam!
Yup. Everyone is talking about the table falling but John's behavior was pretty bad since they started bending. This makes me wonder how he treats him employees / friends off-camera.
You can just tell you’ll have to walk on egg shells around John when he’s stressed I couldn’t work with him
I was going to comment exactly this. I thought for sure I was going to open the comments and see nothing about it but thankfully a bunch of other people noticed as well. John seems like a good guy, but when he's stressed, look out because he gets the bully mentality and it must be miserable to be there during it.
After a few days worth of reflection, you simply edit the video to remove all evidence? haha, dude!! There's only around a few 100 thousand people that have already seen it! Anyone still think it was a joke? 🤣 Sam, I hope you find yourself a better working environment or at least demand danger pay from this clown!
Getting out of the way of that falling slab was the best move! Safety first! You can fix or replace products. Now the possible resulting injury, medical bills, lost time from work, recovery, any investigations, fines (OSHA or similar if you fall into that category), all add up to be a lot more expensive than redoing or modifying the project. Who knows, if Sam did try to catch it and it still broke, that adds even more salt to the wound.
Working for John has to be like working for a toddler who gets angry when stuff is stressful haha
Why do you think everyone leaves??
To be fair thats just about any trades shop though. Especially small ones. But normally even with something like that as a possibility, you get very well taken care of and actually treated like family (not just the BS PR saying lol). It's basically working with your dad and you cant hold the damn flashlight right no matter how much you point it right where he says XD. Places like that have cons but also a lot of pros.
Lol, I cannot believe he got mad that his employee didn't nicely lay down his $200 track to throw himself under a table he's not going to use or sell.
I think most of the time he actually doesn't mean what he says when things go wrong like that. I have actually had friends and people I worked with who during the time it happened, they would say things like what he said to Sam about catching the desk and then afterwards they would come back and apologize cause the heat of the moment got to them. We don't know what happened off camera and although it would be really nice to see him come back and say it on camera for us viewers, I hope he did just make sure his workers were alright after the whole thing. Like he wrote on screen, if no one spoke for supposedly two hours, its like they were in shell shock over what had happened.
But I don't know him personally, I can only know what I see on screen. I only have my own experience to pull from and what I see in his habits on screen. Maybe thats me wanting to believe in the best in people... but I would hope that is the case.
I’ve always thought John would be a crappy boss to work for. This vid kind of proved that. Not just with catching the slab, but also all the other little comments he makes to his employees. He’s very rude.
Hence why Jordan and the other Sam skipped town.
Have to say that the interactions with his staff are most of often the worst parts of the videos. Some banter is funny, but I do not see much going John's way. And when you know only how to dish out, something is not right.
He treated the little guy like the stereotypical trainee who gets shit from everyone and blamed for everything.
Always felt the same way, which is probably half the reason I'm not subscribed. The builds are cool, plus I love shop banter and messing with each other but I don't think I could ever work in a shop like this where he's always playing the blame game or being rude when people are just trying to learn and help.
@@ilglejn Exactly. Seems times have changed and people aren't going to put up with as much before finding a more positive environment to work in.
Pour it!!! Imagine if John was standing up there and something went wrong with the tracksaw and lost an arm. I guess he cares more about the desk more than anybody's safety including his own.
28:38 you re-edited the video.. really?? What can't handle that you were in the wrong john? Why lost it in the 1st place then?? Have you apologise to sam yet???
If the next video isn’t a public apology to Sam, this will be the last video I watch on this channel.
I agree 100%! John treats Sam and his employees like shit!
Agreed
I already unsubscribed, what a DB of an employer
Agree
So this version has been edited to remove the scene where John asks Sam why he didn't think to "catch it". Gotta say, seeing this behavior is disappointing to say the least. In Sam's defense, he did stick his arm/hand out but quickly realized he was in danger. I would have let it drop too. Sam's arm being broken (or possibly severed) would have cost way more than a $2K slab of wood. Good quick thinking "Sam".
So now it's here for posterity so anyone who reads this comment can imagine it's worse than it is. So now you edited out reality and what we have is false facts, fake news BS. Typical for the times. What we should have is a video with an apology. I wouldn't treat an employee like that, but I saw the original and I did not thok it was that bad in the moment. But an apology was called for. So no apology, BYE John. You're a good woodworker, just be that.
If it’s edited out, how would you know?
@@mikej5959 It was in the original video when in dropped last week. Read through the comments. He got tons of backlash for how he treated the guys after it broke. So they took those parts out.
I saw the original video as well. He is not lying John was a giant ass and got on Sam for not trying to stop the slab from falling. Lost a lot of respect for him seeing his true character come through. I’m betting the guy John hired as an editor received a lot of heat for putting the video out as it originally was.
Editing it out makes this even worse.
I don’t even care how this plays out. Unsubscribed last week. Checked in because someone liked a comment. Now I see it’s edited out, but it still doesn’t change the shit show this build was, filmed or not, uploaded or not, edited or not. It happened. And that’s a problem.
To fix it, cut off the broken part, and place the cut part against a wall.
I've always suspected this is the reason why his shop seems to be a revolving door of employees. Guys put up with it for a year or so to get the experience they need and move on to something better.
They've edited the video. Originally John asked him why he didn't try to catch the slab. That part's gone now.
thanks for confirming that, its what i guessed from seeing the combination of the video and the comments but i wasnt sure
If this is as close as Sam gets to an apology I’m
100% out
Thanks, I was wondering what people were on about and I couldn't see him having a go at Sam.
It seems like snippets all throughout the video have been cut out too. John was pretty much on one in this video and 90% of the backhanded comments have been taken out.
Basically makes everything look MUCH worse.
I watched it after the video, and the whole video just feels off. John has always been kind of a douche, but here it just feels like his abusing his position. They're not his friends, they're his employees.
Man i'm glad i dont work for John lol
John, you should really take note of this comment. Lots of likes in a short period of time.
I love this channel. But he would be hard to work for. RiP Jordan!
As a company that sales safety gear its wild how dangerous, chaotic, unplanned, unorganized, and understaffed this project and most of their other projects are.
First and last video I'll ever see from this channel. For the entire comment section to be about how badly you treated someone, and for you to then edit the video without a hint of an apology, is atrocious behaviour. This is what "Do not recommend this channel" was invented for.
You don't pay him enough to catch 300 lb slabs of wood.
Nobody does. And nobody should. That is just nonsense
He even said it is the video. The proper way to do this is to have a form. And they chose to do this stupid thing. They should have just created a form instead of putting people's safety at risk.
@@joe_ferreira Imagine making a form instead of using 6 different kinds of clamps, bolting in a freaking strap and jumping on a table with a handsaw to level cut the bottom while a massive slab of wood is held by what I assume is an aluminum bar and 2 tiny-ass clamps (no straps, no wedges, everyone just watching/chilling and not supporting).
If they'd made a form we wouldn't have seen at least 5 examples of extremely dumb choices in 1 video. It's as if me and my buds tried to do this but none of us have ever done woodworking lmao.
I sure hope Sam’s next boss is a lot better than this.
Yeah John got too inflated from the fame. I mean he was a bench warmer for the Steelers
@@TheHobbyNerd I think it's more insecurity than fame. Look how hard he is trying when he met DemoRanch or Matt 11Best. It was awkward.
@@schoolForAnts I noticed that too. At the same time, I get it. We all have insecurities.
unsub for Sam!
"They say 1 hour per inch, but we are just going to do an hour." "It is not as bendy as i thought i would be." lol
I come back 7 days later hoping to see a apology video…. NOPE he just edits out his piss poor attitude.. 🤡 that’s a quick unsubscribe… do better
bro wtf, John gets mad at Sam (who is holding the track saw that he was asked to grab) instead of planning out the cut like a professional. Typical manager tantrum. Why do I continue watching these videos?
Sam should call in OSHA and report some of that unsafe shit they do.
All I could imagine when John mentions the one guy disappearing when things get “fun”. No he dipped because he saw his boss doing dangerous nonsense and removed himself from the vicinity to not be part of it.
Sam did react for a split second and thought about trying to catch it but he made the right call by just barely getting out of the way. Save your own life not the life of a table, good reaction Sam.
Yes , you see him think about it but his hands were full , just no time.
eyoo, sam blink twice in the next video if john is hurting you
Definitely pour it. It'll give it a cool unique look.
I could also feel the tension and stress in this video. Just by what the comments are saying, i hope this is a learning and growing point for you john.
Can't wait to see the final result!
Aaaaand a new crew coming soon!
Pour it !
Don't give Sam too hard of a time, it is a natural reaction to jump out of the way of something failing. Unless you are an idiot and just stand there and let it hit you.
John would have let it hit himself, but he's a bear.
That table probably weighed the same weight as sam, he made the right choice
@chargerz919 he played in the nfl so running away isn't a option in his mind 😭
Sam was holding a track for a Green Tool, which he saved. Not sure how he was supposed to put it down and keep the table up, only Squiddly Diddly could do it.
@@marquisethomas5611 Sam is probably about a buck 160 give or take. That table is definitely 300lbs. He would have been crushed plus he was holding a track.
I wouldn't cry over it. It broke mainly because it wasn't glued well. You can see after it broke that the glue wasn't seeping into the cuts. This needed penetrating epoxy. It should've been glued up before being clamped if using thick wood glue.
Pour it over words that say "Sorry Sam" to remind you that you need to treat Sam better and that you were the one making a mistake
"Why didn't you try to stop it?!?!" Are you nuts? A multi hundred pound piece of wood is falling towards you, you move! If he tried to catch it, a broken bone would have been the best case scenario. I know people get invested in projects but it's never worth a debilitating injury or worse.
Stitch it and Pour it; it might be an awful combo, but doubling down on the battle scars.
💯 I second that!
Fyi theres an edit to the video. John said after it fell “you didnt try to catch it?!”
I think there should be a pinned comment on the edit.
Pour it.
Also, you owe Sam a public apology. Ain't no way he could catch that while holding a track. Don't make him feel like shit for protecting himself. Sheesh.
pour it, stiching looks like "correcting a mistake" pouring looks like "we designed it like this"
Very good point
WOW....I fell asleep watching Project Farm with my phone laying on my chest. I woke up and rhis video was playing. I watched this the other day and saw the comment section tearing John apart for being kind of an ass to his employees. Then I noticed the video has been edited to not show him saying somethings. Hasnt the laundry list of companies and actors that has done this educational enough John? You just poured gas on the fire my guy.
He worked the whole project as if it was core steel... Have you seen trees fall?
Was nervous the comments weren’t going to call put John’s behaviour being pretty damn terrible this video. Glad to see everyone coming to Sam’s defense!! We love you Sam!!!!
unsub for Sam!
I jumped for my phone to comment on this after watching it on my TV… an apology is badly needed to Sam!!
Me too he was the reason it fell when he climbed his wide load up onto the table anyway then get sideways with the only guy willing to put up with him to do the project. Smh
The steam expanded the wood at the kerfs. Not sure if that was mentioned. That's why you struggled to get it to a perfect 90.
POUR IT! I love the idea of stitching, keeping the look you started with, but the epoxy showing the break just sounds cool, and a great/sad story to tell.
I am a lot bigger than Sam, and there is NO way in fucking hell that I would have tried to catch that big ass slab falling. Not a good reaction to blame him for showing intelligence.
He was just talking ish, im 1000% sure he didnt wanna see sam get hurt just to save a video
He cared enough to not edit out his stupid reaction when he made the video. Those guys need to find another place to work so they don’t have to deal with that toddler’s ego.
Go back on watch the part at .25 speed, Sam actually thinks about catching the slab for about 1/10th of a second then does the smart thing and nopes out.
@@scttydsntknw I was looking for that comment, because I saw the incident in slowmo and only then really knew what was going on in that moment, because it happened all so fast
Ok, I'm not a woodworker, but that's a multi hundred pound slab of wood that you wanted Skinny Sam to get infront of John. Which would you rather have, a broken table, or an injured worker and a worker's comp case?
And or a lawsuit for unsafe working conditions.
He was being facetious. 🙄
@@KB3AOL He clearly wasn't.
@@KB3AOL No he was throwing a tantrum and blaming everyone but himself.
Measuring inches with decimals, then trying to convert to 8ths of an inch, just insane. :D
I wonder if the video editor ending up getting fired over this one. Originally left in all the shitty comments John made to his workers and I wonder if John saw the video before it was uploaded. After all the backlash, he edits all the bad parts out.
Man I hope this guy pays his team well because he treats them like shit, stressing out your team because of poor planning is one way to loose good guys fast
loose?
no amount of pay makes up for being treated like shit.
unsub for Sam!
@@blanerussell4418 Wow you sure got him good.