OpenTx Companion Tutorial • How-to Use Logical Switches • Every Function Explained • [Beginners]
HTML-код
- Опубликовано: 12 авг 2020
- This OpenTx tutorial from rcvideoreviews.com video covers Logical Switches Top to Bottom. The primary goal is to explain every logical switch function and to show how those functions work. In order to gain a complete understanding, you must also fully understand the sources list which is covered as well from top to bottom.
When you've made it through this video, you will understand what logical switch functions do which puts you in a position to exploit one of the key capabilities of OpenTx radios.
Like your dad used to say, "take your medicine..." When this is over, you will feel better.
Donate and become an RCVR Insider: cutt.ly/Td9EhKb
T-Shirts: teespring.com/stores/rcvideor...
RCVR Amazon Basics List
Solder Station Heavy Duty Helping Hands: amzn.to/32WInJN
ToolkitRC WM150 Watt Meter amzn.to/2A13Ogu
Generic Watt Meter amzn.to/377epmg
KaCallap LiPo Discharger amzn.to/3khIAxk
10 Pack XT60 Connectors with shrink tube: amzn.to/2zVBWdB
50 Pack 3.5mm Bullet Connectors: amzn.to/3dw8pot
10 Pack 300mm Servo Extensions: amzn.to/3dVBRoi
Heat Shrink Tubing: amzn.to/3ezjIxB
ZTW 10a peak/6a cont BEC 6v/5.5v/5v: amzn.to/2ZdAA6S
ZTW 40a ESC with XT60 Installed: amzn.to/3fPu2ll
ZTW 60a ESC with XT60 Installed: amzn.to/2CqrNGH
ZTW 80a ESC with XT60 Installed: amzn.to/2ZLIUuS
ZTW Programming Card: amzn.to/2BuHZqb
MG90s 9g Servo 5 Pack: amzn.to/315Kmuh
ISDT LiPo Balance Checker: amzn.to/2Z0HOee
Generic LiPo Balance Checker: amzn.to/3drCO7B
FrSky S6R Rx with Stabilizer: amzn.to/320IrHU
I cannot put enough Likes on this and your other OpenTX how-to video! LOVE it!
Hi. I really like your video's. You explain everything in a simple way. I already fly RC planes and drive RC cars for over 50 years...But you need to go with the time right?
Brilliant!! Thanks for making all these OpenTX videos. As a noob to OpenTX, these are really, really helpfull to help me get my head around the terminology used in the radio, and Companion.
Great video, very informative and helpful. You keep knocking it out of the park with your video's!
It is a very useful video of this OpenTX theme. Thank You for sharing!
Just a big thank you. My learning curve vertical! ABSOLUTE gem was making sure 3 position switch was assigned correctly !SD up and didn't result in ZERO servo travel on one switch position.
Very useful VDO , Thanks for doing this.
Thank you for making these videos. I now understand how the smoke can be made to turn on and off repeatedly. 😀
Powerful feature. Great video n thanks
Ty so much! I've been trying to setup a momentary switch as a toggle that is then output on an aux channel for use in betaflight to enable/disable my video transmitter. Your video finally made it click in my head! I love the tango 2 but the lack of switches requires creativity.
Great videos, very helpful as I'm thinking of upgrading my TX to one of these 🇬🇧👍
I will try that thanks
great job
Wonderful explanation for me just figuring out what the different symbols are and what they do is the hardest to figure out like the !1 after play track will only play when a switch is activated and not on startup.
giving Bardwell a run for his money? your vids are very apriciated, thank you. second to bardwell to me is like wow keep it up,
Super helpful! Thank you! Following your tutorial, I managed to set up throttle warning for optimal cursing speed. Is there a written source, listing the explanation of all the logical switch variables explained in your video? It'd be useful to have it as a reference.
Superb, another enjoyable video to help my brain exit the Covid slumber!
Thank you for all your videos, they are such a help. At first i tried to figure out myself how to do something pretty simple: have my arming switch only be armed when i hold a momentary switch. But the problem was that at first it works, i hold the momentary, flick my 2 pos switch in the arming position and it arms. But then when i release the momentary it disarms the quad again instead of holding the value.. i couldnt figure out how to hold the value there and keep it on armed even after releasing the momentary. I just want it to disarm again when i flick the 2 pos in the disarm position (disarming should work without the momentary switch tho for safety reasons). Now i found your videos and im sure they will help me, but if someone else knows how to accomplish my goal id be happy about a helpful comment and maybe it will also help someone else :) (got hurt in my last session by my quad when my RC was dangling off my neck and it bumped the arm switch while i was getting out the car holding the quad and it hurt me pretty bad, those props can really cut, im glad it was just my hand and im glad that i still managed to hold the quad, even tho the instinct was to let go but that couldve ended even worse. Anyway, have a good one guys, stay safe
You are a busy man. I'm just sitting back trying to soak it up.
It's been extensive, and I want to use it in aircraft schedules. It is necessary on many occasions, when you do not see the way to solve your need. Thank you for your teaching.