OpenTx Tutorial • How-to use Global Functions • Radiomaster TX16s • [Beginners]
HTML-код
- Опубликовано: 25 авг 2024
- This OpenTx tutorial from rcvideoreviews.com shows how to utilize the OpenTx Global Functions. First I review a handful of Global Functions I've found useful over a 5 year span using OpenTx and then I briefly cover additional options available in the software.
T-Shirts: teespring.com/...
RCVR Amazon Basics List
ToolkitRC WM150 Watt Meter amzn.to/2A13Ogu
Generic Watt Meter amzn.to/377epmg
10 Pack XT60 Connectors with shrink tube: amzn.to/2zVBWdB
50 Pack 3.5mm Bullet Connectors: amzn.to/3dw8pot
10 Pack 300mm Servo Extensions: amzn.to/3dVBRoi
Heat Shrink Tubing: amzn.to/3ezjIxB
ZTW 10a peak/6a cont BEC 6v/5.5v/5v: amzn.to/2ZdAA6S
ZTW 40a ESC with XT60 Installed: amzn.to/3fPu2ll
ZTW 60a ESC with XT60 Installed: amzn.to/2CqrNGH
ZTW 80a ESC with XT60 Installed: amzn.to/2ZLIUuS
ZTW Programming Card: amzn.to/2BuHZqb
MG90s 9g Servo 5 Pack: amzn.to/315Kmuh
ISDT LiPo Balance Checker: amzn.to/2Z0HOee
Generic LiPo Balance Checker: amzn.to/3drCO7B
FrSky S6R Rx with Stabilizer: amzn.to/320IrHU
Thanks so much for these tutorials!!!! They are really helping a lot.
You’re very welcome. Thanks for the kind words.
Stumbled upon your videos after my TX16S purchase. Your content is top notch and more informative than most. Would love to see a walk through on how instant trim works. Also cool to see you're flying out of Lady Lake (about an hour from me).
I don't have a standalone video for Instant trim, but I covered its operation here:
ruclips.net/video/C3OO2poE2aM/видео.html
Thanks for the kind words on my tutorials.
Yes, Southern Eagle Squadron is my home field. If you ever make it down this way on a weekend, let me know...maybe we can fly together.
Hi. I really like your video's. You explain everything in a simple way. I already fly RC planes and drive RC cars for over 50 years...But you need to go with the time right?
Since I am also a sound engineer, musician as hobby and retired industrial engineer I see a lot of things in common of the settings and setup of the tx16s when I compare it with digital audio mixers or prorammable industrial sensors,encoders, frequency motor controllers, stages and bus control systems.
I just bought a tx16s mark 2 max and while I am waiting for it to arrive I already want to learn everything how to set up and edit the transmitter and how to set up my planes.
Your video tutorials make that a lot more easy..
Thanks and keep up the good work...And don't crash!....Hahaha. Greetings Herman from the Netherlands (near Amsterdam)
Funny..I remember I build an ugly stick just from a German magazine called FLUG about 40 years ago from balsa wood and put a os max 40 on it....Was a good plane until my 27mhz Robbe transmitter had problems...probably because of an illegal hobby Am Radio amateur what caused a lot of interference on RC model control systems those days...pff...We also needed to wait for each other if we had the same crystal so the same frequency. because we only had limited amounts of channels available. this stayed also later with the 35mhz for planes and 40mhz for cars boates and sometimes planes and helicopters. Yep a lot changed in 40 years with open tx systems...Much better..But somehow I miss the old days...But that's because in my opinion its because people changed and to many gouvernement rules now...
Good luck with your radio. When you invest the time to learn the core functionality, the rest of it becomes quite easy.
Great video, being new to opentx comes with with a lot to learn. A lot of this I learned already but you have just taught me something I was trying to figure out! How to not get the play track for every switch on startup. It’s people like you that make opentx fun to learn thank you.
Awesome! Always nice to know the work I put into this material helps people out. Since you left such a nice comment, I'm going to give you a pro tip that I'll cover in the next OpenTx video: Under Radio Setup (gear icon) near the very bottom of the page there's an option called "Play delay (sw. mid pos)" I have mine set to 190ms. What that does is delays playing of a track for a switch position for that period of time. Here's the idea: Say you have high, mid, low rates on SB like I do and you flip from High to Low. You don't need to hear the radio call out the mid position because you skipped over mid. By using that delay if you move the switch before the 190ms is up, the radio won't play the middle track.
That's just another example of the granularity they provide on OpenTx. It's been very fun to watch this software evolve.
Anyway, welcome to the channel. Make sure you sub and hit the notification bell so you know when I post other OpenTx vids.
J
RC Video Reviews unbelievable it’s like you read my mind about what I want to change but haven’t learned yet. I’ve been looking for videos for this type of information but nobody does videos for the little things like this it’s always full on geek which doesn’t help the newbies. Thank you again!!!
Yeah, there is a lot of material out there, but some of the obvious stuff gets overlooked. Glad it helped.
Thank you so much for your video's about the TX16S. You are the only channel I am using to learn about this device!! Keep up the great work!! THANKS!!
Thanks, will do!
Excellent content John. Thanks for explaining this feature, it is very much appreciated!
Thanks Jim. Appreciate the comment.
Wow this is really useful!
Glad it was helpful!
wow, that's so awesome, that we can do so much with OpenTx! Thanks for explaining all of it, so useful!
Glad to help.
thank again, this is very uselful info, im very old so i cant figure this out myself.
Always glad to help. Thanks for the comment.
Hi! Very good Information on the radio. This is Robert Wioch. I will give you always a Thumps up. you are the best out there. AAAAAAAAAA++++++++++ :))
Thanks again!
Hi john...
Do you have video link to set EPA on this tx16s? And maybe with a little bit more explaination of setting up EPA,Subtrims,Flap/flaperon mixes...
I belive alot of friends here might still need to learn about it on TX16S, EDGETX...
have a nice day John✌🏾😎👍🏾
I think the LUA Script from Special Functions need to be function scripts in that folder.
Great tutorials
Thanks for watching and commenting.
Thanks, very useful!
Glad it was helpful!
Excellent tutorial!
Thank you! Glad you liked it. Thanks for watching.
So clear and helpful thank you
Glad it was helpful! Thanks for watching and commenting.
Hello.Did you have one video with swttings airplane expo,dual rate etc?!
Thanks
You're welcome.
Is is possible to use this functionality to turn on and off the addition internal switches SI and SJ? I have the light rings on them and would like the option to turn them off and on at will.
I have been procrastinating on learning global functions. Thanks a bunch. I know you showed openTX . Do you have a video on EdheTX GF. My global functions are significantly different. When I choose GF1, I get drop down lists, and the function list is limited. No throcut or flaps etc.
Global functions on EdgeTX and OpenTX are pretty much the same. There may be a few new ones on EdgeTX. Special Functions and Global Functions are not identical. When there are potential negative implications of setting a feature as globally available, decisions were made to remove it. So if it's not in the GF list, you'll have to set it as a SF.
Dear sir lovely work big fen. In the video you have clock but not countdown clock how you make it?
In your timers set a timer to activate with throttle and set it to be persistent.
Great and excellent video. Keep em coming. I have an issue with my [en] sound file under sounds being very limited. I attempted to expand from an older [en] sound file but the cross over was not consistent.
Any suggestions would be appreciated.
Thank you.
You're going to love the video I'm rendering right now then. Stay tuned...
@@RCVideoReviews Thanks...Looking forward to it.
The SD card video is up. Watch that for a much better sound option.
Great video 👍👍👍 Subscribed.
Awesome, thank you!
Ahhh haaa! No play on startup! Thanks!
;) There are some nifty little tricks in OpenTx.
That’s great.👍
Looks like you found the video stash :)
thanks again for the instructions. Very useful.
The GF are really cool feature as I also have my switches in muscle memory and won't change them. Only the Throttle Cut I have to.
I just wonder where my speech files for Throttle on/off are or low/middle/hi rates? can't find them when I scroll through...
I guess I could record them myself and copy them into the SD card.
Have you installed the Amber sound pack?
@@RCVideoReviews no, I didn't even know it exists.
Very helpful!
Thank you. Do you use an OpenTx radio?
@@RCVideoReviews Yes, of course! I am an old user of the FrSky QX7, have been delighted with it most of the time, but now the age of the TXs (I have a couple) shows, so I am waiting a bit before buying my first RatioMaster. I would follow one of your links, if they were available at the time.
I don't think I have an affiliate option for the Radiomaster products. Amazon sells them at inflated prices so I wouldn't recommend them. I got mine from Defiancerc.com in Huntsville AL and they got it shipped out in a day. So when you're ready, I wouldn't hesitate to recommend them based on my experience with them on this purchase.
I appreciate the offer of using an affiliate link though. Thanks ;)
I really wanna copy YOUR sd card! 😁
Sorry, you need security clearance for that--and there's the matter of the fee. ;)
Sir, Outstanding videos! I'm a thorn in your side! I started Companion and the radio models are all FrSky! How do I configure Companion for RadioMaster TX16S? Do I just use the Horus model in OTX? Garry
I don't know what you mean "the radio models are all FrSky" You need to create a radio profile and in "RADIO TYPE" choose "Radiomaster TX16s". I don't know what you mean when you say, "use the Horus model in OTX"
@@RCVideoReviews You are correct! I was not aware I had to create a new model. I figured it out after spending some time with it. Thanks! Outstanding videos!
Hi there - thanks for all your videos, it is a great help. How would I go about deleting global and special functions?
You can long press on a global/special function which brings up a submenu allowing you to clear/delete them.
@@RCVideoReviews - and quick to answer! I'm new to the hobby and got a Jumper T-Lite - safe to say your videos are a major asset! Long press don't seem to work on special and global on the T-Lite (works on everything else), but found out I can remove them with companion (right click and select clear). Again thank you!
Good afternoon, I greet you from Colombia .....
It would be good that in addition to the explanation he gives us of the control settings, they would see what they do on the plane. This for those who do not understand English. Thank you
Hi, Thanks for watching. Welcome to the channel. Can you give me more information? I'm not sure what you mean about how the control settings impact the plane. Really, none of these global functions do anything to the controls on the plane. The only one that is control related are the audio announcements for the rates and those don't actually change anything on the plane, they just say what rate is selected.
@@RCVideoReviews thanks for the reply. I mean the other and upcoming videos that I make.
so that we can physically see what the plane does with the teachings it gives us about control. Thank you
Ok, I think I understand. If I have anything directly impacting the plane I will try to show it.
@@RCVideoReviews muchas gracias
So I just got my TX16S yday. I dont see the track "midrat" or any of the other rates ones on my options. Do I maybe need to do an update?
ruclips.net/video/S4QYoLFlMf0/видео.html
Nice tut sir. Recently i am getting vibration in mid flight dont know exactly when its coming. Getting vibration just once randomly not repeatedly any clue sir? I have set Rssi voice warning and battery warning also as voice commands. Haptic is set to nokey. Does hapatic activate on low RSSI or batt voltage?
I'd start by deleting telemetry to see if those are causing the warnings. If they are, then you can add them back and figure it out as you go.
@@RCVideoReviews I recently updated firware back and fourth from then on this issue is commng. Dynamic is on so while shifting 25 to 100 or 250 will the haptic triger?
Hi John hope things are good with you, I’ve been trying to setup instant trim in global functions with no luck at all. No trouble in special functions. What might I be doing wrong, I’m at a loss what to try next, Alan
Funny you mention that. I couldn't get instant trim to work on my last OpenTX radio at the field when I flew the Goblin for the maiden. I commented to Freddie about it. I may have to look into it a little further. You're not alone. Mine didn't work in GF or SF.
@@RCVideoReviews good man
Love you tutorials! They are wonderful. One question though. When I try to pick a trac to play non are listed. Even when I try it with the radio it says no sounds on sd card. But I can open the file on the computer and they are there. Any idea on how to get the radio to recognize them? Thanks!
Sounds like something wrong with the location or permissions of the SOUNDS folder on your SD card. I would probably delete it and copy the SOUNDS folder from the SD Card contents.zip file back over to the SD card. If the sounds are there and permissions are correct, the radio will find them.
Hi
Thanks for the super videos -rally helpful.
I have used global functions as described in the video to reset timer1. It works except that if you try to reset when throttle is not -100 a throttle warning pops up which will not go away until throttle is zeroed. Un ticking throttle warning in main set up screen solves but now (obviously) no warning on start up.
Any ideas.
That's weird, mind doesn't behave the way you described yours.
Here's what I setup:
1) Added Global Function GFx, SE down, Reset, Timer 1, On
2) Exit to main menu
3) SE down, timer 1 reset
4) Throttle to 50%
5) SE down, timer 1 reset - no alert
6) SE up, timer 1 continued countdown
7) Throttle to 100%
8) SE down, timer 1 reset - no alert
9) SE up, timer 1 continued countdown
I can't replicate what you're telling me.
How do you do a throttle cut
This is about the best I came up with: ruclips.net/video/Y0eKFAFNeX8/видео.html
Question... I have new TX16S max.....in global functions mode there is NO hi rate mid rate or low rate ???
Your thoughts please. Thanks
Nope, no mid, low or high rates in global functions. That's true.
@@RCVideoReviews where are they as I am setting up new. airplane that has rates ?
Thank you
@@r.u.kidding8696 ruclips.net/video/kd7etAzXGEA/видео.html
I solved the problem by using ‘set Timer1 00.08.00’ but after your email changed back to Reset and everything works. Must have been my finger trouble sorry and thanks.9
Ok, good. Glad you're working.
I programmed some play tracks in special functions on tx12. Edgetx/elrs How do I delete them? Thank you.
Hey John, thank you very much for the very useful vid. On global functions I don’t find the ‘lowrat’ Midrat or highrat option listed as a track (for a switch warning sound) Is my version of open tx maybe outdated? I have the new tx16s only a week old.
You probably need to install the Amber sound pack.
Download Amber Sound Pack: hmvc.eu/Amber22.rar
Put Contents in SD Card SOUND -> EN
The Amber sound pack offers a great deal more prompts than the default sound pack.
@@RCVideoReviews thanks John... Will now do so.
Thanks for these great helpful videos they are a life saver, but i can not get my Global Functions to work, i have set all the functions in the video, but the sounds dont play and i cant take a screen shot? am i missing something? i dont have to turn anything else on do i?
If you look at your model settings setup page, go down toward the bottom and look for a checkbox labeled "Use global funcs" and make sure there's a check in that box.
Glad the videos are helpful to you. Thanks for watching.
J
@@RCVideoReviews thank you! sorted, spent hours looking for that option
The operation of the INST. TRIM, what does it do, reset the TRIM? I tried to do what you did in the video and nothing happened.
Instant trim uses whatever values your sticks have for rudder/aileron/elevator and sets those values of your trim with one click.
thats funny because i do all of these in special functions. whats the difference between doing this in global functions vs special functions tab?
Not everything available in special functions is available in global functions, and there may be some things you want for just one plane that you don't want for all planes. Global Functions will work on every plane that has the "use global functions" box checked.
@@RCVideoReviews ah so cool I get it!!! Thanks a bunch ❤️
@@josephfreeman5289 Anytime.
Hey John, I got my TX16S a couple of month ago and started by viewing your beginner videos and I feel I have come a long way in setting some advanced features in my radion thanks to you. I have one thing that you might know off and that is using Global Functions for settings used in all models in stead of Special Functions. The the Logical switches are available in Special Functions but not in the Global Functions. Is that a missing feature that is know?
I found a way around by creating the new function in Special Functions and copy the new function to Global Functions.
The software version on my radio is the 2.3.9. All my programming is done on the Radio.
Thanks for all your effort doing great tutorials.
There are a number of Special Functions operations not available in Global Functions including things like Channel Overrides. It's been like that in OTX as long as I've been using it. I doubt it's overlooked/unknown.
"I found a way around by creating the new function in Special Functions and copy the new function to Global Functions"
How are you copying a Special Function to Global Functions?
In any event, I'm happy to hear the videos have helped out out. Thanks for the comment.
I use the traditional method by long press a Special Function and select copy. Open the Global Functions and long press and select paste. I am sure you already know that :)
I have encountered the same issue with your Throttle Override. It is not possible to copy a channel override.
Thanks for your reply and I will be watching for more OTX videos.
@@tommimadsen3719 I know about copy and paste, but I've never tried to copy a function that exists in special functions to a global function where that "function" doesn't exist. I will try it to see what I learn, but that doesn't sound right to me. I'd be surprised if the radio allowed that.
That does not work on my radio. Here's the test I just ran:
1) Special Function 1 - SH down, Override Ch3 - 100 On.
2) Copy SF1
3) Exit model, press system, page to Global Functions.
4) Highlight GF5 (empty)
5) Long press jog dial, no pop-up menu.
6) Short press jog dial to edit GF5, pop-up says "Switches, Trims, Other, Invert" Selecting other populates field with "ON"
I cannot copy functions from Special Functions to Global functions when the function doesn't already exist in Global Functions.
Test 2:
1) Special Function 1 - SH down, SetFailsafe, On
2) Copy SF1
3) Exit model, press system, page to Global Functions.
4) Highlight GF5 (empty)
5) Long press jog dial. Menu pops up with Paste option.
6) Short press jog dial, SF1 pasted into GF5.
SetFailsafe is the function in question and that function is already available in Global Functions.
@@RCVideoReviews I have also tried the Channel override and that did not work for me either.
I find it a bit Strange that logical switches can be selected as trigger in SF and can be copied to GF but logical switches cannot be selected as triggers in GF.
Example:
LS: L01 a
I'm trying to implement some of the Global Functions that you outlined in this video, but I've run into a couple of obstacles. 1) The S1 and S2 rotating pots don't seem to show up in the list of available switches and 2) When I try to assign a switch to Play a Track, none of the .wav audio files show up under the parameters column. I just see four little dots. I checked, and those .wav files are present in the English folder of the Sounds folder. Any thoughts? Thanks for a great video series!
The pots are not available in the first column, but they are available in the 4th column.
Do this on a blank GF Line:
1) SA down
2) Volume
3) Press Jog Dial and release. Cursor should blink. Spin S1 or S2. That should set S1 or S2 as the volume control for the radio.
It shouldn't be "English" it should be "en". The path should be: /SOUNDS/en/ The first file in that path shoul dbe 1cell.wav if you're using Amber.
If you see that in your SD browser, long press on it and the popup should offer a play option. Hit play. If that works, then you should see the wav options in your drop downs.
@@RCVideoReviews Success! I've got volume control on a pot, timer reset, and three dual rate settings, with audible announcements of their status. It is coming together!
@@tcgliderguy1 Awesome! What was the issue with sound?
@@RCVideoReviews I installed the Amber voice pack (after my first inquiry to you about this) and those .wav files showed up. I think there may still be an issue with the Companion app finding the SD card contents, but I'm puzzling over that now. I've got a manually created backup of the latest version of the SD card on my computer, so there's no danger of anything going to far astray. Thanks for the help!
@@tcgliderguy1 You're welcome.
Can you adjust backlight with a pot?
That question came up in last week's livestream and I have not found a way to do it.
I have latest sd card installed but on my playtrack selection no hirat or lowrat wav! please assist if possible thanks. I have looked in latest zip as well but dont see Hirat etc either perplexed not in system folder either... I have noheli for radio build
ok I have now found the open tx sound editor cool make my own warnings for high rate etc was that what I was missing out on lol www.open-tx.org/2014/03/15/opentx-speaker
You need to download and install the Amber sound pack.
@@RCVideoReviews yes done that scolling is a chore so remember to always set up tracks on companion!
@@BrianRamseysg01 Absolutely right :)
My global function don’t those 3 little dots
Can you be more specific? Are you referring to the three dashes that are placeholders for the switches? What are your build options?
@@RCVideoReviews in Global Variables:
GV1 0 FM0 FM0 FM0 FM0 FM0 FM0 FM0 FM0
And each line has the same the same
I was trying to do the same thing you did but on the GLOBAL VARIABLES page it was not the same as on your radio.
I am using RadioMaster TX16s Max.
@@reginaldmcnab3265 Global Variables are not the same as Global functions. You get to Global Variables by pressing the MODEL key. You get to Global Functions by pressing the SYSTEM key.
@@RCVideoReviews yes you are right! Thank you so much! Ice work! Thank you once more.
THis has. nothing to do with companion wth???
Yeah, you're right. I went through a bulk rename some time ago to try and get some consistency in the way I titled videos and this one got caught up in that. Obviously I didn't use companion for the demo, so I took it back out of the title. Thanks for writing.
To bad you can't make your motor cut off set up, a global function.
Yeah, there are limitations in Global Functions. It would probably be a bad idea to make channel overrides available globally.