Why there are INPUT-MIXER-OUTPUT Screens in EdgeTX and OpenTX and what they are for..
HTML-код
- Опубликовано: 25 авг 2024
- See more tips for EdgeTX and OpenTX here: • OpenTX & EdgeTX Mixing...
EdgeTX Beginners Series: • EdgeTX for beginners
Thank you for taking the time to watch the video. You can find me on social media at / painless360
/ painless360
www.thingivers...
R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!
If this video helped you and you want to support the channel you can use these links:
/ painless360
paypal.me/pain....
Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#drone #painless360 #review
My rule of thumb for those three screens is:
Inputs: here you can address shortcomings of the inputs/handset (expo, dual rate etc.).
Mixers: here you do your actual programming/model functions.
Outputs: here you can address shortcomings of the model - servos mounted the wrong way round, midpoints being off etc.
Excellent video as usual. Simple and easy to follow. I was a JR Radio user back in the day and when I started flying helis again 18 months ago I went to OpenTX. It was a bit daunting at first but these days I can set up a modern heli in about 30 minutes. The concept of the three areas, input, mix and output is logical if you think about it.
Been using opentx since the x9d came out and the first model took me 3 days to figure out. I have been following and using your videos for specific setups and thank you for the time and effort you have given to the community. Without you tubers l believe Open/Edge TX would not have been successful. Certainly Frsky did not provide enough support for users!. The only thing I see the need for is a script which would do a simple 4-5 servo setup with rates and expo being able to be inputted in the same style as the new model setup just more comprehensive which would help new non computer literate new users get started. So thanks again for you considerable help in getting people using the open source programs. Cheers. Have a Merry Christmas and a Good New Year. All the best for 2023 👍
I have been looking for this type of video!!! I can't wait to watch it. I just switched to a TX16 and even though I have never picked up a manual or watched a video for any transmitter in the last 30 years this one has me overwhelmed.
I would love a series that walked menu by menu and gave a overview of each function. Not a deep dive persay but build a framework to build on. Most videos are based on teaching a single function, but without a solid framework I find myself parroting the settings over to my radio without a firm grasp of what I am doing, or how to apply it to other use cases.
Check out the Opentx mix school series. I covered the basics in the first few videos.... Best of luck
@@Painless360 Thank you for the recommendation and pointing me in the right direction, will go there next. I appreciate all the other channels that put out videos covering Edgetx. For some reason your style of teaching is easier to follow and more productive. Thank you for the time invested making these videos for our benefit. (And your reply)
I really like your slides. I've been watching your presentations for years. I've always learned more with the slides. Thank you.
thanks so much! First 100% understandable explanation!
Very, very...good! It´s the 30 years old Multiplex Profi family filosofy, completely progamable and interchangeble inputs and outputs, mix and switchs, no one to compare with...till now
Thank you Lee. I intended to come to Open TX but when I got my Tx16S and switched it on I found EdgeTx! Your videos have been extremely useful. I came from Multiplex and soon realised that the icons at the top of the screen corresponded to the markings for the buttons on my Royal Pro Tx. That made things a bit easier for me to understand but I must say that the Edge Tx is actually easier for me to program than my Multiplex gear. However, I have yet to try to programme a 4 servo wing,
but I feel that it may be easier. So far my Tx is just used for indoor helis and I am finding the flexibility of Edge a great help in getting my helis to fly in a controlled way. Especially the flexibility given by the curves. It really is useful to understand how powerful these can be.
I had a Multiplex Profi back in the day and was, like you, surprised at how similar OpenTX was to the MP system. Enough to make me wonder if OpenTX was modeled after it……
Man, I don't thank people on youtube much but this was one GREAT VIDEO! As a new pilot, all I can say is THANK YOU! Love the diagrams too!
What a great video! I sort of knew all this before, sort of... But now I also understand it. Probably one of your most important videos ever!
I have a differential thrust watercraft and use the inputs and mixers in conjunction with switches to either limit throttle position or gain in different modes, limiting or eliminating reverse in some of the modes. Switches can also be used in conjunction with servo settings to lock them in place, e.g., maintaining a camera angle without the worry about inadvertently bumping things on the control. It does get confusing as to where and when one might use functions, between the mixer and the inputs in particular, especially when essentially programming compound functions. Sometimes I wish "they" (i.e., the brilliant Edge/Open TX folks) would just give us AND and OR gates on the control configuration to do what we wanted there as it would be a lot more intuitive. The slopes on the "curve" aren't always intuitive, especially when/if used with switches.
Great explanation. I’ve gone from old school futaba to edge tx about a year ago. I understand it better now, and yes you can literally set anything up. for me, the very basic fixed wing sport pilot, the redundancy is really annoying. I think there could be a mode for fixed wing where you get all of that on one screen, and done. My old super 7 can v tail or elevon mix, and it’s literally the easiest thing to do in the world. The Lua script seems to help quite a bit for setup of a basic model for us primitive creatures.
Edge tx is sometimes too powerful for its own good lol.
The EdgeTX team are working on improving usability and giving users a simpler interface to setup basics... Happy flying
Hi Lee. Great video and information about how mixing works. I only had one plane that I was using mixing, I had a 1/3 scale Extra 300L, and I used mixing for knife-edge flying. I could add a little bit of elevator to the maneuver so I could fly straight without much input. Thanks again for the video and information.
Fantastic video, Lee! Thanks!!! 😃
I use the outputs to set the limits of the gimbals, so the FC receives exactly between 1000 and 2000.
Anyway, stay safe there with your family! 🖖😊
Thank you very much for this Lee! So helpful
The why- I believe it is old functionality left over from before FCs or before they were as powerful as they are now. They are also still there for when you don't want to use an FC. They also come in handy for custom input and outputs.
Good video, I haven't thought about those screens causing confusion, but I have been using it for many years
That's right. If you use a flight controller then most of the complex stuff on the radio is not used as all of that is configured in the flight controller (rates, expo, mixing etc.). It is only for things like gliders and non FC controlled models that I get into that stuff now.. Happy flying!
Excellent,like..
@Painless360 Maybe you could do a video about configuring a glider with lots of different functions. Crow, camber etc. I'm always struggling with that
Check out the Opentx mix school series. I cover that over a few videos... Best of luck
I am spektrum user as well this is overwhelming more I play with it the better my understanding one question I do have how do I get my timer to reset it is attached to my arm switch thank you Mr painless your videos are great and easy to follow enjoy your holiday
ruclips.net/video/bScCdTrJxgo/видео.html should help, let me know if you still can't get it working.
@@Painless360 worked just fine thanks getting better with this very powerful O.S seems like if you can think what your trying to achieve odds are it can be done. more than one way to boot.Thanks again
Be warned! If you change the servo direction in the input tab, the trim will be opposite. I confettied a 30 year old Big Stick this way! I took off and was over some trees when I bumped the trim for more up. It didn't seem to do anything, so I just held the trim for more up trim and it went right into the trees. Poof! It was a new Taranis X9D radio, 10 years ago, but it had openTX.
We've all been there! Check out instant trim... Happy flying
would you do an autonomous helicopter mission on a video? are the feet far enough apart to land? skids.
If I get my hands on an Arducopter powered heli, I will.. Merry Xmas!
So with this open tx i can control dual motor (for example controlling the sprocket of a rc excavator) without dual motor driver ?
Possibly, depends on how those motors are controlled. If it us PWM, then should work...
do the expo amounts add together from input to mix or is one the master and takes precedence? Thank you.
They compound. Add them to one place only.... Happy flying
can you download the settings from someone else that has the same drone and load it on the remote without understanding all this?
Not easily. Setup for a DRONE is super easy as there is no need for complex setups i.e. ruclips.net/video/zAtx4aXr_P0/видео.html
Watching this makes me wonder if you'll be using the mixer to slow the transition to flight to the VTOL build...
Interesting question. The short answer is no. The flight controller has a lot to do with the transitions so you need to set all of that up on there and just initiate it all from the radio.. Happy flying!
I started with a Spektrum radio, and I never did understand it fully. Everything always seemed to have a bit of mystery to whether or not my attempts at configuring would work or not. I was ok with it, but being an open source developer, supporter, and believer in open source software, I didn't hesitate for a second on switching to OpenTx. Althought the three screens being so similar was a bit of a confuser, and of course it was a new interface (thankfully on a real screen and not on the radio itself,) overall I found OpenTx to be a lot more intuitive than the Spektrum. As soon as I started using it, everything was making sense.
Are you using EdgeTx nowadays? The last video I saw from you regarding EdgeTx was that you were not upgrading yet. Did things change?
I am starting to use EdgeTX more but my main flight radio is still OpenTX as I don't use ELRS on that one and it works great..
@@Painless360 I'm sticking with OpenTx since it does all I need.
Hey man I'm just trying to utilize the D button on my Radiomaster TX12 to activate "BEEP GPS SATELLITE COUNT" in Betaflight. On the TX12 Inputs screen I have it listed as I-d 100 SD but it does not activate anything in Betaflight.
On the Receiver screen there's no movement when I press it, and on the Modes tab I click Add Range for BEEP GPS SATELLITE COUNT and press the button but it doesn't detect it. Any advice? I'm sure it's something extremely simple I'm missing lol.
Set it up in the mixer screen, not inputs. Check out my Opentx and EdgeTX mix school series. Happy flying
@@Painless360 I tried it on both but I’ll have to watch that video to see if I can pinpoint what I’m doing wrong!
ruclips.net/video/OJCaAvjjw40/видео.html
I really enjoyed your video. Maybe I can pick your brain. I have a plane that has only ailewrons, motor, and elevators. No matter what pin I use nothing works. I think I need to change my channel order. How do I change from TEAR to AETR?
Channel order will not make a difference unless you are using something like a stabiliser or flight controller. For a basic build video see ruclips.net/video/Vaq4Jt0XzOU/видео.html
Thank you for your response. I'm having trouble understanding TX16s. I recently switched from Spectrum. It's like learning a new language. Anyway, the reason I reached out to you is that I'm trying to setup that plane I mentioned before. Here is where I'm confused. My input screen shows RUD, ELE, THRO, and AIL. In that order. My mix screen shows AIL, ELE, and THRO in that order. My output screen shows CHAN 1 as Ail, Cha2 as ELE, and Chan 3 as Thro. When I plug in any of those wires to the correct pin, nothing happens. If I put the aileron wire into channel 1, nothing happens. Thro in Channel 3 nothing happens. I'll watch the video you sent. Thanks for your time.
Please watch the introduction to EdgeTX series, it was made for pilots in your position... Best of luck
I'm sort of confused. Do I still need to assign switches (arm, flight modes etc.) on the radio even though I already did it in betaflight?
Yes. See ruclips.net/video/zAtx4aXr_P0/видео.html
Thank you, Sir. Very helpful. When I setup my FC in Betaflight I setup Aux 1 as an Arm switch, however I never touched the settings on the radio. Once I bound the transmitter and receiver, the Arm switch functioned as it should. Dumb luck I guess lol 🙃.
And I still have all my fingers... 🤣
Hello, please help me how to make the EDGE TX Radiomaster ТХ 16C timer start when the gas stick is raised up.
Use the THs setting for the timer. See ruclips.net/video/oyu27mKRwZ8/видео.html
Best of luck!