All good, but i couldn't understand that group shifting method in the code, that's the reason i can't apply it to my home automation project, kindly helppppppppp meeeeeeeeeeeee outttttttttttttt
Hey, thanks for the video. When i try to record some sample the device's output is always Start then saying "no voice" even if i talk all the time, did anyone can solve this before?
@@nicomimich6448 Oui pour moi tout fonctionne je suis d'autant contant que je ne suis qu'un amateur et que pour une fois tout fonctionne du premier coup!
Hello Sir, I have a big problem, I can't get any information from my geeetech module. For example in Hex mode when I type "AA 00" or "AA 36" I don't receive any feedback, I don't know what to do I'm lost. I used arduino to connect the module to the computer but it didn't work so I also used a USB TTL module CP2102 but it doesn't work please help me.
can I control the duration of the action? for example, if I wanted the led light to turn on for 1 second, can I do that? I actually want to control a momentary switch via voice.
can this code also work for car key remote module? I want to control room lights and door alarm with a car key remote, I think it can help elderly to control the house without having too move around to much as their body was not that agile anymore, get tired quickly and prone to fall
ok..what am i doing wrong? i have the hyperterm up and running. set all the values exactly like yours and send AA 00.....nothing. nothing at all..what am i doing wrong?
Hi Thanks for your informative and perspicacious explanation. Just realised the STL files are not been able to download from website.. can you fix it asap?
You Need to send Serial.write(0x21); from the Arduino to the other circuit board. This will make it change to group 1. Then, send Serial.write(0x22); for group 2, then send Serial.write(0x23); for group 3.
@@duckeydave3603 bro can you check this code for me? This is not working for arduino mega. //In and Out int led1 = 2; int led2 = 3; int led3 = 4; int led4 = 5; int led5 = 6; int led6 = 7; int led7 = 8; int led8 = 9; int led9 = 10; int led10 = 11; //Variables byte com = 0; int ld1 = 0; int ld2 = 0; int ld3 = 0; int ld4 = 0; int ld5 = 0; int ld6 = 0; int ld7 = 0; int ld8 = 0; int ld9 = 0; int ld10 = 0; void setup() { Serial.begin(9600); pinMode(led1, OUTPUT); // sets the ledPin to be an output pinMode(led2, OUTPUT); // sets the ledPin to be an output pinMode(led3, OUTPUT); // sets the ledPin to be an output pinMode(led4, OUTPUT); // sets the ledPin to be an output pinMode(led5, OUTPUT); // sets the ledPin to be an output pinMode(led6, OUTPUT); // sets the ledPin to be an output pinMode(led7, OUTPUT); // sets the ledPin to be an output pinMode(led8, OUTPUT); // sets the ledPin to be an output pinMode(led9, OUTPUT); // sets the ledPin to be an output pinMode(led10, OUTPUT); // sets the ledPin to be an output digitalWrite(led1,LOW); digitalWrite(led2,LOW); digitalWrite(led3,LOW); digitalWrite(led4,LOW); digitalWrite(led5,LOW); digitalWrite(led6,LOW); digitalWrite(led7,LOW); digitalWrite(led8,LOW); digitalWrite(led9,LOW); digitalWrite(led10,LOW); Serial.write(0xAA); Serial.write(0x00);//Waiting delay(100); Serial.write(0xAA); Serial.write(0x37);//Compact mode delay(100); Serial.write(0xAA); Serial.write(0x00);//Waiting delay(100); Serial.write(0xAA); Serial.write(0x21);//Import group 1 Serial.write(0xAA); Serial.write(0x00);//Waiting delay(100); Serial.write(0xAA); Serial.write(0x37);//Compact mode delay(100); Serial.write(0xAA); Serial.write(0x00);//Waiting delay(100); Serial.write(0xAA); Serial.write(0x22);//Import group 2 } void loop() // run over and over again { while(Serial.available()) { com = Serial.read(); //We receive the voice command and save it in the com byte
Hi! Your video is excellent! I have a question. I want a module to receive the speech of the person and convert to text in order to use it with Python, would this module work for me for this?
sir, using voice recognition module if one person's voice command is dumped into arduino and if another person tells the same command will it accept? please reply
Hey electronoob the project was so pretty , I'm seriously in love with your concept , I'm gonna try this but I'm confused that FTDI module is compulsory or what?
no, this is a voice recognition module. The one that you say is just a sound detector. It could detect sounds, clap, etc but it won't recognize commands
please help me I bought a voice recognition module ELECHOUSE Voice Recognition Module V3 But I can not record more than 7 Weiss No matter how much I read the tutorial PDF file, I can not record more than 7 sounds Please teach me how to record more than 7 weiss in (several groups) To begin sigtrain 0 sigtrain 1 sigtrain 2 sigtrain 3 sigtrain 4 sigtrain 5 sigtrain 6 Now what command should I send for the second group? What about the third group? And the fourth group? I record (sigtrain 7) but the command does not execute Please, please, guide me I want to record 70 voice commands Help me please Help me please Help me please Help me please Help me please Help me please
I hope you enjoy it. If you have any question use my Q&A page or this comment section. You coule always improve this project!
Electronoobs thx dude
why my module LED still blinking fast after store the command? plz help me
Will it work with everyone's voice or only recognised voice command
All good, but i couldn't understand that group shifting method in the code, that's the reason i can't apply it to my home automation project, kindly helppppppppp meeeeeeeeeeeee outttttttttttttt
If anyone is able to successfully shift from group 1 to 2 kindly help me ottttt????
Thank you for sharing all that! You're generous and didactic.
What a great instructional video! Thank you!
Super! Keep up from Puerto Rico 🇵🇷
Can it understand the voice of other people for the same command trained in my voice ?
Si me haces un abridor de cervezas con control vocal jajajaj. Sería la ostia
10.56 after that did u saved the voice commands
You are best Bro!
Hello, how control leds with 3 groups voices (15 voice)
we did enjoy thx man
Nice!
Make an ardiuno based biped next time! (Using 15-17 9g servos!)
Thanks!
How I can control a voice play back module like ( isd 1820)
That's owsome. Dude.... It's too cool
Can we ad more voice commands
Pls make a video to control brushless motors with voice
when 3d printing spitfire !?
Hey, thanks for the video. When i try to record some sample the device's output is always Start then saying "no voice" even if i talk all the time, did anyone can solve this before?
Please make a video tutorial about voice recognition controll relay module and wireless such as home alone movies
Enfin quelque chose qui fonctionne! Un grand merci et continue comme ça!
Ça fonctionne ? Vous l'avez essayé ? Je suis sur un projet similaire mais ça coince...
@@nicomimich6448 Oui pour moi tout fonctionne je suis d'autant contant que je ne suis qu'un amateur et que pour une fois tout fonctionne du premier coup!
Tant mieux ! 🙏 Je vais continuer à chercher la solution 💪
Did it can recognize more long sentence🤔🤔🤔
Very informative
Hello Sir,
I have a big problem, I can't get any information from my geeetech module.
For example in Hex mode when I type "AA 00" or "AA 36" I don't receive any feedback, I don't know what to do I'm lost.
I used arduino to connect the module to the computer but it didn't work so I also used a USB TTL module CP2102 but it doesn't work please help me.
hello mate did you fix it please help me
any update?
can I control the duration of the action? for example, if I wanted the led light to turn on for 1 second, can I do that? I actually want to control a momentary switch via voice.
Excellent 👍...
seems that the 3d files are missing
Very good thanks bro
can this code also work for car key remote module? I want to control room lights and door alarm with a car key remote, I think it can help elderly to control the house without having too move around to much as their body was not that agile anymore, get tired quickly and prone to fall
You need a new code. What comunication dose the car key has? virtual wire for 433MHz?
can you make tutorial on how to make home automation using alexa and nodemcu
i cant run :/ my pc see Usb and im try for connect but i cant maybe usb converter have set and cs pin please help me
Can we make 19 dof biped robot with voice recognition module
Que mola este tutorial!
Nice video.
16:00 even if I click like button like crazy, it only works in odd numbers
Don't worry. The +1 is perfect!
what was the need to remove the atmega microcontroller? pls tell
ok..what am i doing wrong? i have the hyperterm up and running. set all the values exactly like yours and send AA 00.....nothing. nothing at all..what am i doing wrong?
Can I use more than five voice commands at a time
do i just delete the other servos in the code if i wna control 2 servos and a light and can i use only 1 group of commands ?
Hi
Thanks for your informative and perspicacious explanation.
Just realised the STL files are not been able to download from website.. can you fix it asap?
I've got a doubt. Can we use the ftdi in Arduino uno for programming Arduino mini ??
How do you import the second group of commands??
I've tried a couple of things but it does not work.
You Need to send Serial.write(0x21); from the Arduino to the other circuit board. This will make it change to group 1. Then, send Serial.write(0x22); for group 2, then send Serial.write(0x23); for group 3.
@@duckeydave3603 bro can you check this code for me? This is not working for arduino mega. //In and Out
int led1 = 2;
int led2 = 3;
int led3 = 4;
int led4 = 5;
int led5 = 6;
int led6 = 7;
int led7 = 8;
int led8 = 9;
int led9 = 10;
int led10 = 11;
//Variables
byte com = 0;
int ld1 = 0;
int ld2 = 0;
int ld3 = 0;
int ld4 = 0;
int ld5 = 0;
int ld6 = 0;
int ld7 = 0;
int ld8 = 0;
int ld9 = 0;
int ld10 = 0;
void setup()
{
Serial.begin(9600);
pinMode(led1, OUTPUT); // sets the ledPin to be an output
pinMode(led2, OUTPUT); // sets the ledPin to be an output
pinMode(led3, OUTPUT); // sets the ledPin to be an output
pinMode(led4, OUTPUT); // sets the ledPin to be an output
pinMode(led5, OUTPUT); // sets the ledPin to be an output
pinMode(led6, OUTPUT); // sets the ledPin to be an output
pinMode(led7, OUTPUT); // sets the ledPin to be an output
pinMode(led8, OUTPUT); // sets the ledPin to be an output
pinMode(led9, OUTPUT); // sets the ledPin to be an output
pinMode(led10, OUTPUT); // sets the ledPin to be an output
digitalWrite(led1,LOW);
digitalWrite(led2,LOW);
digitalWrite(led3,LOW);
digitalWrite(led4,LOW);
digitalWrite(led5,LOW);
digitalWrite(led6,LOW);
digitalWrite(led7,LOW);
digitalWrite(led8,LOW);
digitalWrite(led9,LOW);
digitalWrite(led10,LOW);
Serial.write(0xAA);
Serial.write(0x00);//Waiting
delay(100);
Serial.write(0xAA);
Serial.write(0x37);//Compact mode
delay(100);
Serial.write(0xAA);
Serial.write(0x00);//Waiting
delay(100);
Serial.write(0xAA);
Serial.write(0x21);//Import group 1
Serial.write(0xAA);
Serial.write(0x00);//Waiting
delay(100);
Serial.write(0xAA);
Serial.write(0x37);//Compact mode
delay(100);
Serial.write(0xAA);
Serial.write(0x00);//Waiting
delay(100);
Serial.write(0xAA);
Serial.write(0x22);//Import group 2
}
void loop() // run over and over again
{
while(Serial.available())
{
com = Serial.read(); //We receive the voice command and save it in the com byte
if(com == 0x11)//LED1
{
ld1=!ld1;
digitalWrite(led1,ld1);
}
if(com == 0x12)//LED2
{
ld2=!ld2;
digitalWrite(led2,ld2);
}
if(com == 0x13)//LED3
{
ld3=!ld3;
digitalWrite(led3,ld3);
}
if(com == 0x14)//LED4
{
ld4=!ld4;
digitalWrite(led4,ld4);
}
if(com == 0x15)//LED5
{
ld5=!ld5;
digitalWrite(led5,ld5);
}
if(com == 0x21)//LED6
{
ld6=!ld6;
digitalWrite(led6,ld6);
}
if(com == 0x22)//LED7
{
ld7=!ld7;
digitalWrite(led7,ld7);
}
if(com == 0x23)//LED8
{
ld8=!ld8;
digitalWrite(led8,ld8);
}
if(com == 0x24)//LED9
{
ld9=!ld9;
digitalWrite(led9,ld9);
}
if(com == 0x25)//LED10
{
ld10=!ld10;
digitalWrite(led10,ld10);
}
}
}
I want to buy this modle
I need some help. when i was giving commands (AA00) it is not receiving.
Naveen polisetty0298 same is here
Same to
same...
@@muratcancetinkaya8442 sorunu çözdünüz mü
i have ElecHouse voice recongnition module v3.1 so i will work?
Hey I need to control 10 servos , how should I do that can you please help me
How does control 15commonds please tell code
now do a project doing 2 arm voice control for someone not having use of their regular arms, and make a video, thanks
Hi! Your video is excellent! I have a question. I want a module to receive the speech of the person and convert to text in order to use it with Python, would this module work for me for this?
Does the voice commands work with only one person's voice? Or does it work with anyones voice using a "trigger" word (Like "Hello" or "Move") Thanks!
HEY ELECTRONOoB,
can we use voice recognition module called HUB360 ( Orange colour) insted of GEEETECH voice recognition module! ?
How does write code on 15 commonds
sir, using voice recognition module if one person's voice command is dumped into arduino and if another person tells the same command will it accept? please reply
Nice job, but can I use this on a humanoid robot?
Hey electronoob the project was so pretty , I'm seriously in love with your concept , I'm gonna try this but I'm confused that FTDI module is compulsory or what?
You could use the arduino but you have to remove the atmega chip and use the FTDi that the arduino has.
Does it work if different persons speak?
I want learn commands and arduino code any tutorial ?
i need a help regarding this project ,, can i contact u???
can i use simple 1.2$ microphone module instead of this 15$ vr module?
no, this is a voice recognition module. The one that you say is just a sound detector. It could detect sounds, clap, etc but it won't recognize commands
ok 1 last ques. is there any cheap alternative to this vr module?
GREAT I ALSO MAKE MINE
How to make it know know more command groups
why not use google voice or amazon
Hanzhen harmonic gear , robot gear, , over 30 years experience
9:07 the auto subtitle recognize pitch, as bitch
Oswald Rayleigh lol
i think using a smart phone and a bluetooth communication ,could be easy and cheap
can I use on win10 ?
Yes! I'm using win 10!
+Electronoobs plz give me connection of Robertic arm n how u built it? plzz give me connection video
Code explanation plz
please help me
I bought a voice recognition module
ELECHOUSE Voice Recognition Module V3
But I can not record more than 7 Weiss
No matter how much I read the tutorial PDF file, I can not record more than 7 sounds
Please teach me how to record more than 7 weiss in (several groups)
To begin
sigtrain 0
sigtrain 1
sigtrain 2
sigtrain 3
sigtrain 4
sigtrain 5
sigtrain 6
Now what command should I send for the second group?
What about the third group?
And the fourth group?
I record (sigtrain 7) but the command does not execute
Please, please, guide me
I want to record 70 voice commands
Help me please
Help me please
Help me please
Help me please
Help me please
Help me please
It work on arduino nano ?
yes but the code will need to be tweaked
REFER PDF FOR MOR DETAIL IN THIS LINK
www.geeetech.com/wiki/images/6/69/Voice_Recognize_manual.pdf
What's with German as language?
No problem. It doesn't detect language. It detects sounds that you create!
Electronoobs 👍
We can send 15 comments one by one
Please make artificial intelligence with Arduino please please please.
Who also agree please support by like 🙏🏻🙏🏻🙏🏻
How does write code on 15 commonds