ResMed CPAP AirFit F20 & F30 Review Quiet Air Technology Advice by USA Medical Supply CPAP Nation

Поделиться
HTML-код
  • Опубликовано: 30 окт 2018
  • Music being used in our videos:
    Track: Ikson - Paradise [Official]
    Music provided by Ikson®
    Listen: Ikson.lnk.to/p... CPAP NATION BELOW / cpapn. .
    Lumin Link Below:
    usamedicalsupp....
    Get your CPAP Supplies through us by negotiating pricing. Make sure you send a link to back up your request for pricing. Thank you. Info@USAMedicalSupply.com #youtubechannel #RUclips #subscribe #youtubevideos #youtubevideo #like #Health #Medicine #CPAP #USAMedicalSupply #USA #CPAPAdvice #CPAPTherapy #CPAPReviews #CPAPTips #CPAPHelp #Health #Wellness #BiPap #Bilevel #ASV

Комментарии • 50

  • @USAMedicalSupply
    @USAMedicalSupply  Год назад

    Please consider supporting my local business in West Springfield, MA. If you call (413)733-7843 and order with promo code RUclips, you will save 20% on masks and accessories. Excluding Machines. Also, email info@usamedicalsupply.com your best CPAP machine offers to see if I can beat them! All the best everyone!

  • @kevinmacfionbhar2157
    @kevinmacfionbhar2157 4 года назад +2

    I have an F30 mask and have bought liners from Silentnight at 6 quid each which only last for a week and are rough on the skin, then from Padacheek a piece of cloth with a few holes cut in it for 40 quid! Then I thought, hang on, I could do that much cheaper. I just need it to protect my skin from the mask so I borrowed a cotton face mask from my sister and she cut two holes for nose and mouth, clipped it over my ears then put the F30 over it. Works fine. You can get them for 1 or 2 quid and they are washable. Give it a try. Also found that the mask slips forward and so doesn't stay firmly on the nose, especially a problem when sleeping. Bought some large velcro cable ties and connected the front and back headstraps, tightened it to a secure and comfortable position and it works fine and stays in position through the night. Great to be able to use the F30 as it is the most comfortable and the full face one brings out a nasty rash on my nose.

  • @sandygodoy1415
    @sandygodoy1415 3 года назад +2

    I was wondering why the foam mask can't be cleaned with the So clean. I just got the foam mask and put it in the so clean machine twice so why not?

  • @rayperez6214
    @rayperez6214 2 года назад +2

    very helpful !!!!

  • @andresreyna4260
    @andresreyna4260 2 года назад +1

    Great informative video! Very well done! Wish I had seen this a couple weeks ago & had know that the f30 fast can muti mask I’d have asked for that instead of just the f20 touch.

  • @geirtonnessen2566
    @geirtonnessen2566 4 года назад +4

    The F20 pillow does NOT work well with the F30 mask, in my opinion. It leaves a leaking gap at the top.

  • @unclefester9113
    @unclefester9113 5 лет назад +2

    The Memory foam is a great mask. I'm still getting some pinkness on my nose bridge. Its a hit or miss. I'm anxious to give the F30 a try. I've been using the Amara View off and on - I like the Amara - but since it is a smaller mask - and has less surface area, it is prone to shift on my face - and develop leaks. I'm hoping the F30 will give me a good fall back for when I need a break from the AirFit mask. By the way - I have washed - full immersion, the foam masks. I dry them with a small computer fan - and it takes 10 or 12 hours. They do loose some of their seal and shape. I"m just trying to maximize the life of these masks.

    • @sysmanrick1
      @sysmanrick1 5 лет назад +2

      I use a SoClean unit. Put the entire mask in the unit.

  • @bsquared44
    @bsquared44 4 года назад +2

    I have been trying to wear the Dreamwear full face mask - mask seems comfortable but have an issue with losing a seal with the nose piece often. Air blows up into my eyes. Is this a common issue with that mask? Trying to decide if I need to try to the F30 or move over to the F20. Any recommendations would be much appreciated.

  • @Ashmooni
    @Ashmooni 4 года назад +1

    I clean my memory foam mask with soap and water. I have been doing this daily without problems.

    • @USAMedicalSupply
      @USAMedicalSupply  4 года назад +2

      Ok, that's the first I've heard of someone doing that but happy it's working out for you.

  • @JenHerrmann
    @JenHerrmann 4 года назад +2

    Super helpful!

  • @davecarter34
    @davecarter34 4 года назад +1

    does the quiet air exhaust port fit the n20 nasal pillow mask, the exhaust port is loud and often wakes my wife and me up would like to sleep through the night

  • @paulcody1426
    @paulcody1426 5 лет назад +3

    Great video. I have a question. Can you interchange a medium f30 mask. And a large f20 cushion. Or is it only comparable medium To medium? Thanks for The help

  • @rmorenberg
    @rmorenberg 4 года назад +2

    so I had to shave to get a good seal but I might want to try the f30 with the f20 face

  • @91jphil
    @91jphil 5 лет назад +1

    Been looking everywhere and cant find it... how in the world do you clean the newer quietair vent? Does the plastic cap come off? Does the foam looking stuff not harbor a place for bacteria to grow after it gets wet?
    I could just brush my old one out. But not this one.

  • @williamfoster8123
    @williamfoster8123 5 лет назад +2

    Was not able to innerchange the f30 headgear with an f20 mask. I like the f20 headgear but, did not care for the mask due to excessive leaks. But really like the idea of the f30 headgear!

    • @mvc00134
      @mvc00134 5 лет назад +3

      Yeah the video is misleading. The F20 mask will appear to snap into the F30 headgear at first go (as he shows in the video starting @2:50), but it is not held in place as securely and you'll get small air leaks as it wobbles inside the headgear, especially if you're a restless or side sleeper. Best to use F20 headgear with F20 mask and F30 headgear with F30 mask.

  • @online22much
    @online22much 4 года назад +1

    i'M STRUGGLing to snap the two pieces of the mask apart. You do it with ease and I can't see how you're doing it. I have the F20 silicone mask and replacements for it. I've yet to see someone take it apart slowly on camera...I find the mask more comfortable..but still do not get any more than 4 hours sleep.

    • @zulyo400
      @zulyo400 3 года назад

      Depending on what browser you’re using to watch the videos, there’s an option to change the play speed to slower. I hope the tip helps so you can observe the details of tutorial. Can you try a sleep aid so you can get more than 4 hrs at a time? I’m a shift worker so I typically can’t get more of 4-6 hrs. Other times I sleep 10 hrs but from exhaustion.

  • @florenceduty614
    @florenceduty614 Год назад

    I just got the N20 mask, Jet stream hits my hub in the back...is there an alternative quiet vented piece i can add?

  • @golddredgewater
    @golddredgewater 4 года назад +1

    I have that mask. F20. Why don’t you say anything about no air coming out of the air vents in the elbow.?

  • @draganpavlov1
    @draganpavlov1 4 года назад +2

    when will you do review on new Resmed F30i full face mask?..maybe compare it to Philips Dreamwear full face..=)

  • @cube10025
    @cube10025 4 года назад +1

    feels like the vent are too far away on the f20, its like I am breathing my own air. I do not have a f30 but I have the Philips one and its a lot better, however the Philips one feels a bit small just like he says with f30.

  • @TheDragonflyCottage
    @TheDragonflyCottage 5 лет назад +2

    I have to use bipap to help get rid of the CO2 build up in my lungs. I bought this mask and can’t see or feel any air vents. I feel I am breathing the CO2 right back I have only used it for a half an hour. I’m afraid to use it

  • @zulyo400
    @zulyo400 3 года назад

    Do the magnets for F20 fit for F30 please? Or is the headgear interchangeable? I bought the wrong head gear and came without clips. And it seems the F30 headgear is more expensive than F20 but they look identical. I’ve seen the magnet clips being sold separately as well. Oh, and I check for pressure w that valve too. It’s super quiet and sometimes I wonder if machine still running but it is. I also swap between masks because they leave marks on my face/nose.

  • @tonymai1844
    @tonymai1844 4 года назад +1

    Thanks sir, I mistake bought F30, then it does not fit me at all. I saw your video and bought the silicon F20 cushion. It fit me perfect and I am able to use the mask frame F30 with F20 cushion. Thanks alot. my DME told me it does not fit, they lied to me.

    • @zulyo400
      @zulyo400 3 года назад +1

      Do the magnetic clips from the F20 fit the F30 please? I bought the wrong head gear and didn’t come w the clips. When I look online the headgear for F30 is more expensive but looks identical to F20.

  • @harleyquebecenrevue3580
    @harleyquebecenrevue3580 2 года назад

    The Air Mini with the F30 setup pack using an F30 silicone mask is very noisy. I guess the quiet air technology is not used on the AirMini kit. Is there a solution to using this combination but reducing the air noise ? Thanks.

    • @USAMedicalSupply
      @USAMedicalSupply  2 года назад

      Hi Harley,Sorry, I haven’t visited the airmini in a very long time and Im unaware of an option.

  • @dukeledford9623
    @dukeledford9623 5 лет назад +1

    Can the AirTouch memory foam mask be used in a SoClean 2 for daily cleaning?

    • @USAMedicalSupply
      @USAMedicalSupply  5 лет назад

      Duke Ledford No!

    • @dukeledford9623
      @dukeledford9623 5 лет назад +1

      Footit Medical, CPAP, & Stairlift Service
      Thank you for the speedy response! If you HAD to pick between the AirTouch and the F30 what would you choose? My F20 is really aggravating the bridge of my nose.

    • @USAMedicalSupply
      @USAMedicalSupply  5 лет назад +1

      Duke Ledford Keep them and use them both. I swap out masks constantly and have nose bridge problems.

  • @patrickpetrowsky8136
    @patrickpetrowsky8136 5 лет назад +1

    How is the F30 with a full beard and higher pressures?

    • @USAMedicalSupply
      @USAMedicalSupply  5 лет назад +2

      We have gotten bad feedback with beards and the F30 from several of our patients. Our go to beard mask is an oldie but goodie called the Fisher & Paykel Simplus.

    • @patrickpetrowsky8136
      @patrickpetrowsky8136 5 лет назад

      @@USAMedicalSupply Thanks. I really appreciate the feedback!

  • @shadythereok
    @shadythereok 3 года назад

    The F20 is great, so comfortable, but now for some reason I'm getting puffy hollow bags under my eyes for a few hours every morning?

    • @USAMedicalSupply
      @USAMedicalSupply  3 года назад +2

      When is the last time you changed your cushion?

    • @shadythereok
      @shadythereok 3 года назад

      @@USAMedicalSupply
      It's 5 days old
      I reset the straps last night, to minimal tightness
      Large mask, I'm going to get the F30 tomorrow, I'll just have to get a chin strap also

    • @USAMedicalSupply
      @USAMedicalSupply  3 года назад +1

      You getting leaks near the eyes? Don’t know why you need a chin strap with an F30

    • @shadythereok
      @shadythereok 3 года назад

      @@USAMedicalSupply
      No leaks

    • @USAMedicalSupply
      @USAMedicalSupply  3 года назад +1

      Straps could be too tight. Follow ups with your provider. Let us know how the F30 goes.