What I really love about this combo is that fact you don't have to wait several hours before applying Dream Maker after Bead Maker is cured. Honestly that was one of my biggest gripes using both products. Kudos to Jamie!
Same here pan. I’ve never had any of these issues that some people are complaining about. However, I did do a test when I just did a full detail on my car. What I did was sprayed down my whole car while it was wet with bead maker, then went around the car in the light spritz of dream maker.. I didn’t use my silk drying towels to pull the water off the car, and it dried amazingly.. that worked phenomenal. It’s over a week old now, and I drove through the rain and the car still looks super glossy and very clean.
Thanks, I appreciate it! How did you discover my channel by the way Kermyt? Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 980,000 subscribers and we have over 132 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
Thanks Pan and community for sharing this tip. I just tested this mix and it really works. Normally, the dust appeared just next or two days after washing the car. Now, there is much less dust with a longer durability of the gloss and slickness provided by the mix. It really works!
Hello Pan! I revisited your fantastic video 🙌 because I needed the formula to refill my bottle. I wanted to mention that I've been facing the same dusting problem, even though my driveway is 60-80 meters of gravel. Despite the regular delivery vans causing dust due to their daily visits, I noticed a significant reduction in dust on my car after mixing Bead Maker with Dream Maker at a 10:1 dilution ratio. Big kudos to Jamie, the amazing cleaner 👨🏻🔬🧪🚙!
Having a 2019 Black Bullitt I will definitely put this to the test once I have finished the correction and coating process. thanks for the detailed explanation.
Props to P&S for all their products and to Paaaaaan the Organizer, the issues with the dust, in my opinion, comes the most with our customers in the following days after and not so much with us when we’re done with the detail. Very useful information will try the mix, thanks Pan
Pan back in the 90s my father worked down the street from P&S and would stop off and get the original products from the two brothers father! As a kid in the 90s I used their early products, like the old muilt dressing, his mirror glaze ect...
Worth a try. I have used Bead Maker for a long time. Just ordered some Dream Maker. Cheap way to improve the finish if it works. Have to say from personal experience, I don't think Bead Maker has the ultra slick finish of some waxes and even detail sprays. Love the look of it, though, as a finishing product. Even on my white Lexus GS 350 F Sport, it looks great. It also seems to me to work better on glass than paint. I use it during my weekly car washes/details between full wash/correct/wax sessions which I do several times a year (very relaxing with good results). Hopefully this combo is even better. Thanks for the video!
Oh wow man I’m so amped about this. Chemistry is what gets me to where I gotta go. I don’t even own my Honda anymore but I got into this vid, watched it six times I think
Pan…after watching the video…I realized I had both Dream and Bead on the shelf…I thought it was worth trying because I have A BLACK FERRARI which has dust all the time. Dude it’s been 3 weeks and I’ve never seen anything like it…very little to no dust. It works ! Thanks
I’ve been using the cleanmaker for probably 2 months or so and it works pretty well. I never had a problem with bead maker but if you’re going to drive before bead maker cures I think it would help to keep a little dust off
I just ordered Bead Maker as Detailed Imaging had a BOGO, now I just ordered Dream Maker to make the "secret sauce" from Amazon. Looking forward to this weekend to wash and apply the new mix of shine and slickness. Thanks for your videos, made me a subscriber.
Cool! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 985,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
Had a mix I made nearly a year ago, 80% BM and 20% DM in a 500ml spray bottle. Tested it as a summer test topper/drying aid for my AM Hybrid Sealant coating, and IW SuperGloss+ Spray Wax protection -- very glossy on Subaru Magnetite Grey paint. *Hope P&S are working on BM v2.0 with better longevity/chem resis*
I’ve been doing this recently myself. I first saw the concept on Hawaii Detailing’s channel, with Jeremy. I like it. Thanks for sharing your e peri and confirmation from the maker’s input! Happy Holidays Pan 🎄
Pan, great tip! 🎉I live in Prague, Czech Republic and the dust during summer is a pain in the eye. Good thing is that I have found only one distributor here so I am going to try it if there is an improvement and will keep you all posted 😊
@@danielwilson3976 I noticed a slight improvement after the miss with DreamMaker. However, I've switched to Gyeon Ceramic Detailer and now only use the Bead-Dream Mix occasionally, mainly on sunny winter days when I do a rinse-less wash.
Yes, I’ve done 32 years of Surface Tension, ESD (Electro Static Discharge) and Tribo Charging work and the elimination of it, for computer chips, hybrid, micro, circuits, and many many other surfaces. 3 years ago, I’ve developed a mixture of various ingredients that does what you mention, just at a different level. I’m pretty low-key about it. Could’ve started a large manufacturing company, but I’ve done that for too many decades. Just happy people are catching on to what helps other detailers be more successful. 🙏🏻
I've done the same in the specialty chemical industry. Dust is static. Simple as that. The process of applying and removing BeadMaker with a microfiber towel creates the charge.
good idea. I already mixed beadmaker:dreammaker 5:1 in the summer. then paint gloss as a finish. very nice. I have also mixed sonax bsd with adbl wax 50:50. the beading and pearls are fantastic!
Some dust? Lol. Yes. Some streaking? Yes. Thanks for sharing info. As I'm watching I'm hoping in your diy that you show us how to add an anti static of some sort.
What a cool idea! I have been doing two applications, first breadmaker and then Dreammaker and the results are fantastic, of course. Here, you have shown how to combine these two products effectively so now I can do a single application. As we all know - in detailing time is money and this is just very cool and efficient. Thanks so much!
Hi Pan, thanks for pointing me to this tutorial. How often should I use this 'Clean maker' on my ceramic-coated car? And the climate in my country is similar to California. What I want is slickness and gloss but afraid from over protection.
Man……… I thought you were going to drink the bead maker again before mixing!lol great video and information! You never steer us wrong! Using a lot of their products and impressed each time.
Pan this is great, thanks! I switched from Chemical Guys After Wash to Auto Fanatic’s 007 Gloss Enhancer for my drying aid with your recommendation and I like it more, but both products attract dust. Definitely looking forward to trying this out next!
Great tips Pan as I have never tried this before. P&S makes quality products at an affordable price so this combination is on my list of products to buy. Thank you for another great video!
@@PanTheOrganizer Christmas was my only day off in December but it was nice. I hope you had a great Christmas too! Now I have to get to work setting up an LLC and figuring out processing payments and finding an app for scheduling and building a website. Thank you for sharing your knowledge over the years as it helps a lot!
This is crazy I love both these products but do have issues with BM attracting dust so I started experimenting with mixing them and found that 4 to 1 was better than 1 to 1 but glad to see that the 10 to 1 ratio is even better! Just saved me a lot of time and speculation pan!
Hey Pan… John from Boston we met at SEMA this year. We talked about Bead Maker, thanks for the blending tip. I’ll need to wait till spring but looking forward to trying it. All the Best !
I love bead maker but living in Puerto Rico where is summer all year I have the dust issue, will definitely try this to see if there is a notable difference.
Great breakdown Pan. We settled on a similar mix known in our business as ‘Gold Maker’ about a year ago when DM first released. It was definitely bore from necessity and is a staple in our IK.
I learn something new everyday, I'll definitely need to try this. I believe I have beadmaker in the arsenal still. Pan excellent video! Happy Holidays!
@HawaiiDetailing came out with an Absolute + Bead Maker "Honey Pot" mix that I'm interested in trying. I shelved my Bead Maker this past last year for longer lasting quick detailers. Hopefully this mix can bring some use back to my Bead Maker, which I really enjoyed using.
@@Tony_Seed Griot's Ceramic 3 in 1, Meguiar's Hybrid Ceramic Detailer, and Sonax Brilliant Quick Detailer. All of these will give me longer protection.
Glad you enjoyed it! Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 995,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
Wauw!!! The solution of my dreams :) have both pruducts and was always hesitating between both as indeed, I love beadm but comes with a bit of dust and streaks, whereas dreamm comes with nice gloss but no protection. Definitely going to try this!!!!
@@PanTheOrganizer it works :) Suggestion on a future video or a question; how to redo part of a ceramic coated car? When for example you ve had an accident and part is replaced or repainted, or when you have some undeep scratches.. just an idea ;)
I did notice the dust about 4-5 month ago, I did try the 50/50 with dream and bead maker to but as you said the durability was not there, I had tried the griots ceramic 3/1 and did not get the gloss, so I combined all three and happy now,
Did you apply the Griots 3/1, then the bead maker? I’m looking at getting a better base down before bead maker. Griots or turtle wax ice seal and shine or the meguirs hybrid ceramic wax are options I’m looking at
Awesome! My own little mix is Griots Ceramic Speed Shine, Adams Graphene Detail Spray, and P&S dream maker all in one bottle. 350ml of GCSS and AGDS, the 40ml of P&S DM. Love the videos!
Thanks Jalen! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 840,000 subscribers and 105 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer honestly Pan I’ve been watching your videos for about a year now and implementing some of your techniques with my great detailing foundation. I thought I hit subscribe months ago and just realized I didn’t. Detailing is my healing space and peace of mind. Just looking back on a vehicle that I’ve touched saying I took it from that to this, just does it for me in my daily life.
Hello Pan, thank you for the video. I tried this combo on my 2018 black Cadillac and I still seem to attract dust. My ceramic coating is about 12 months but I use Bead/Dream Maker every 2 weeks. Any other products that might help alleviate dust would be appreciated.
Hey Pan, love the channel! I'm a mobile detailer and I've been on the fence about using P&S bead maker vs DIY quick beads. I can get bead maker at wholesale prices at .22 cents/oz which is very appealing however, I feel like its not the end users job to make a product better. I can get DIY quick beads for around .77 cent/oz and I can apply it wet and get 4-6 months protection according to them! Again, the price of bead maker is very appealing but I can't wrap my head around having to buy two different products to make one product perform better. I detail in the desert and my clients can't always wait 8 hour for cure time. Hopefully P&S will see all of the feedback and just make the product perform better and not put it on the end user. Sorry for the rant but wanted to share my thoughts with you! Keep doing what you're doing!
Bead Maker doesn't last very long (3-4 weeks) so Quick Beads will outlast it hands down. We mainly use Bead Maker as a topper over an existing long lasting protection. Bead Maker has the lead over Quick Beads when it comes to gloss and slickness. But in certain situations, some say it attracts dust (I never had such issues where I live). Hence why we add a bit of Dream Maker in the mix to add anti-static properties. So it depends what you're looking for. Durability and speed of application, Quick Beads wins. Gloss and slickness, Bead Maker all day. By the way, P&S now produces a limited run of the combined Bead Maker + Dream Maker, and it's called Clean Maker. Here's a link to it: bit.ly/42SEO42
@@PanTheOrganizer Thanks so much for the reply and the insights. Fair points, it's a tough trade off between durability and gloss. If they make this special edition in a 5gal like bead maker I might be a customer. At the current price it's not super economical at 5x/oz compared to bead maker. Thanks for bringing this to my attention! Glad to see they acted on the customer feedback. Cheers.
I have just circled back to this video. I greatly appreciate the information not just in this video, but in all of your videos. That said, it really is a shame that the Bead Maker formula has not been revised to add anti-static properties. This is particularly true since the owner of the company is the chemist who developed the formula and, therefore, should have the ability to improve the product.
Hey Pan, I live in Gatineau, Quebec and Bead maker does attracts a lot of dust. I love this product even with the dust issue! It`s an awesome product! thanks
Hi! Just wanna ask, do you think I can replace the dream maker with p&s paint gloss showroom spray n shine? Same ratio? Coz I can't find any supplier of the dream maker here in my country.. thanks in advance!
Wow! Wish I'd known about this DIY Secret before now!! Thanks for posting such a GREAT tip, Pan! Question...Do I have to do a paint correction on my car first before applying this DIY combo to really have a showroom-type shine?
Thanks for watching! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 952,000 subscribers and we have over 127 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
Hi, would you use this 1:10 mix as a first layer coat (base coat), or would you start with the 'normal route' of a more generous coat of Bead Maker (wait 2-8 hours), and then proceed 're-applying' it with the 1:10 ratio mentioned in the video? Thanks.
I haven't seen the gloss enhancers before. Do they really make a difference? If I have a ceramic coating, can you still use it - and does it make a difference on top of that?
I will definitely try this! I noticed that every time I wash my vehicles roughly 2 hrs afterward they get covered in a layer of dust , so frustrating. I have tried different drying aids.
This could be a good idea. I don't have dust or streaking issues, but I might try a small amount of this to see if it adds gloss above Bead Maker alone.
Hi Pan! Hope you are well. Thank you for sharing this information. Very useful indeed. Would like to see a demo of you applying this formula and see how it beads etc. Would that be possible? I wish you and your family a very Merry Christmas. Take care. 👍🎄🎅
Pan, I completely enjoy your videos and always appreciate the education you supply with it. So, possible dumb question. Is there any issue with using Beadmaker each time you dry the vehicle?
Pan, can this combo be applied right after a fresh ceramic coat? As in I plan to use Gyeon Syncro Evo and top with Gyeon Cure. Can this go right on after or should I wait a week?
Thanks pan for this info. Couldn't agree more about using metric. What's to learn. Could you also focus a bit more on the UV component of these products because once again it's getting near 40 deg C here in Australia. We need to put sunscreen on our cars. Thanks
@@PanTheOrganizer that video you linked is with defender and bead-maker which saying you can mix them and she does another video that says they bead-maker and defender cant be mixed.
@ in the video its bead-maker and defender that she is using but another video she says they cant be used together.ruclips.net/video/FmG94EPMbq4/видео.htmlsi=lJ7UaJqK9Xod2zd1
Great info pan as I have also had some dust collecting issues. Hopefully this will work for me on my Diy personal vehicles. I’m also really surprised if this works so well why p&s hasn’t done this combo for the market. I do understand marketing and product sells but come on p&s help out consumers and bring to maker “BEAM MAKER” 😂😂
Love the videos,,,keep them coming,,I have a c7 corvette and it seems to attract dust more than my other cars,,does the plastic/fibreglass/carbon fibre add to the static attraction of dust? Love your Porsche and the color,,,,
I love bead maker as a drying aid but shy away from it as a sealant, thanks for the great tip definitely will have to try it now I’m just waiting for them to release a car wash infused with bead maker
Yes…a 5yr ceramic was professionally installed when I purchased it…use the Combo as an amplifier/topper every other wash. Literally foam/rinse, repeat foam rinse and blow dry (purchased an Ego last week and the short car attachment (thanks for that recommendation). Then hit the car with the combo. I have noticed it’s a bit finicky when the humidity is high). But the gloss is top tier!
All this sounds great. I agree customer service with p&s is outstanding. Products are outstanding. Has anyone used a gloss meter on this mix vs applying bead maker by itself? Or even bead maker then dream maker separately? I'm curious what the gloss meter would say
For the first application, Bead Maker needs to cure 8-10 hours on the surface according to P&S. After that, when you do regular maintenance using it as a drying aid or quick detailer, no curing needed.
🔥 For more quality detailing products visit: tinyurl.com/bdehsjys
⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇
🇺🇸 For people in USA:
P&S Bead Maker: bit.ly/3DVxgS2
P&S Dream Maker: bit.ly/3WTdBe5
Pressol spray bottle: bit.ly/3A8Clp0
Spray bottle: bit.ly/3AauZ4h
Measuring cup: amzn.to/3hqdLcC
Pump sprayer: amzn.to/3A7WFHg
Microfiber drying towel: amzn.to/3GauXxk
🇨🇦 For people in Canada:
For a limited time, get the '"Clean Maker" mix here: bit.ly/3vGVtel
P&S Bead Maker: bit.ly/3CTOK2s
P&S Dream Maker: bit.ly/3Fs5C1q
Spray bottle: bit.ly/3SKt0ei
Measuring cup: bit.ly/3Aa9il3
Pump sprayer: bit.ly/3ehHXVI
Microfiber drying towel: bit.ly/3fWQzlV
🇬🇧 For people in the UK:
P&S Bead Maker: bit.ly/3wPgNMv
P&S Dream Maker: bit.ly/3AECVKJ
Spray bottle: bit.ly/3EmSPMP
Pump sprayer: bit.ly/3G9JtW4
Microfiber drying towel: bit.ly/3UMbS8C
Watch more of my videos below!
✅ P&S Bead Maker review: ruclips.net/video/J7uc4AlarpU/видео.html
✅ P&S Dream Maker review: ruclips.net/video/KB9ISQwXLkg/видео.html
✅ P&S Pearl Shampoo review: ruclips.net/video/cp2xoTN5Rp8/видео.html
✅ P&S XPress Interior Cleaner review: ruclips.net/video/bz7h-HfSdRg/видео.html
✅ P&S Brake Buster wheel & tire cleaner review: ruclips.net/video/AoecVluB4Po/видео.html
is there a store to walk in to get these in Canada, or just on line?
Hey Pan,
What's your honest opinion on "Legend" by P&S?
What I really love about this combo is that fact you don't have to wait several hours before applying Dream Maker after Bead Maker is cured. Honestly that was one of my biggest gripes using both products. Kudos to Jamie!
Same here pan. I’ve never had any of these issues that some people are complaining about. However, I did do a test when I just did a full detail on my car. What I did was sprayed down my whole car while it was wet with bead maker, then went around the car in the light spritz of dream maker.. I didn’t use my silk drying towels to pull the water off the car, and it dried amazingly.. that worked phenomenal. It’s over a week old now, and I drove through the rain and the car still looks super glossy and very clean.
One of my Top 5 favorite Detailing Channels 🙏🏼
Thanks, I appreciate it! How did you discover my channel by the way Kermyt?
Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 980,000 subscribers and we have over 132 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Thanks Pan and community for sharing this tip. I just tested this mix and it really works. Normally, the dust appeared just next or two days after washing the car. Now, there is much less dust with a longer durability of the gloss and slickness provided by the mix. It really works!
Thanks for sharing the feedback Ruben!
Hello Pan! I revisited your fantastic video 🙌 because I needed the formula to refill my bottle. I wanted to mention that I've been facing the same dusting problem, even though my driveway is 60-80 meters of gravel. Despite the regular delivery vans causing dust due to their daily visits, I noticed a significant reduction in dust on my car after mixing Bead Maker with Dream Maker at a 10:1 dilution ratio. Big kudos to Jamie, the amazing cleaner 👨🏻🔬🧪🚙!
Thanks for sharing!!
Having a 2019 Black Bullitt I will definitely put this to the test once I have finished the correction and coating process.
thanks for the detailed explanation.
Props to P&S for all their products and to Paaaaaan the Organizer, the issues with the dust, in my opinion, comes the most with our customers in the following days after and not so much with us when we’re done with the detail. Very useful information will try the mix, thanks Pan
Thanks Armando! 😁👍🏻
Pan back in the 90s my father worked down the street from P&S and would stop off and get the original products from the two brothers father! As a kid in the 90s I used their early products, like the old muilt dressing, his mirror glaze ect...
There is sooooo much out there now. My goodness. Fun to see the problem solving that goes on in the detailing world. Pretty cool.
Jamie the Cleaner has made it to the big leagues!! Congrats 🎉
What an awesome tip to end the year with! Thank you Pan. Can not wait to try this.
You are so welcome!
I have been trying this for a few weeks now in California. This is genius!!! I love it.
Thanks for sharing.
Worth a try. I have used Bead Maker for a long time. Just ordered some Dream Maker. Cheap way to improve the finish if it works. Have to say from personal experience, I don't think Bead Maker has the ultra slick finish of some waxes and even detail sprays. Love the look of it, though, as a finishing product. Even on my white Lexus GS 350 F Sport, it looks great. It also seems to me to work better on glass than paint. I use it during my weekly car washes/details between full wash/correct/wax sessions which I do several times a year (very relaxing with good results). Hopefully this combo is even better. Thanks for the video!
Thank you Pan The Organizer. Very helpful as always. I ordered both Bead Maker and Dream Maker. I can't wait to test them out.
Enjoy!
Oh wow man I’m so amped about this. Chemistry is what gets me to where I gotta go. I don’t even own my Honda anymore but I got into this vid, watched it six times I think
Pan…after watching the video…I realized I had both Dream and Bead on the shelf…I thought it was worth trying because I have A BLACK FERRARI which has dust all the time. Dude it’s been 3 weeks and I’ve never seen anything like it…very little to no dust. It works !
Thanks
Awesome! Thanks for the feedback. I'm glad to hear that.
Jamie The Cleaner for the Winnnnnnnnn! Awesome that you have him kudos on this! Great stuff!
Thanks Fred!
I’ve been using the cleanmaker for probably 2 months or so and it works pretty well. I never had a problem with bead maker but if you’re going to drive before bead maker cures I think it would help to keep a little dust off
I just ordered Bead Maker as Detailed Imaging had a BOGO, now I just ordered Dream Maker to make the "secret sauce" from Amazon. Looking forward to this weekend to wash and apply the new mix of shine and slickness. Thanks for your videos, made me a subscriber.
Cool! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 985,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Thank you for the tip! Tried this combo today at several dealerships, washing cars for delivery. Works very well! Greets from Belgium.
@@laurapalmerTDGE Beiden.😉
Great to hear!
Had a mix I made nearly a year ago, 80% BM and 20% DM in a 500ml spray bottle. Tested it as a summer test topper/drying aid for my AM Hybrid Sealant coating, and IW SuperGloss+ Spray Wax protection -- very glossy on Subaru Magnetite Grey paint. *Hope P&S are working on BM v2.0 with better longevity/chem resis*
An official from P&S said there won't be a Bead Maker 2.0
@@PanTheOrganizerwow.. I would of thought they would improve such a popular name
I’ve been doing this recently myself. I first saw the concept on Hawaii Detailing’s channel, with Jeremy. I like it. Thanks for sharing your e peri and confirmation from the maker’s input! Happy Holidays Pan 🎄
Hawaii detailing is the man!!!
Happy holidays!
Pan, great video. It's always enjoyable to get the science behind the products.
Thanks Jay!
Pan, great tip! 🎉I live in Prague, Czech Republic and the dust during summer is a pain in the eye. Good thing is that I have found only one distributor here so I am going to try it if there is an improvement and will keep you all posted 😊
@@gilbertocharpentier6391 how did it end up working?
@@danielwilson3976 I noticed a slight improvement after the miss with DreamMaker. However, I've switched to Gyeon Ceramic Detailer and now only use the Bead-Dream Mix occasionally, mainly on sunny winter days when I do a rinse-less wash.
Yes, I’ve done 32 years of Surface Tension, ESD (Electro Static Discharge) and Tribo Charging work and the elimination of it, for computer chips, hybrid, micro, circuits, and many many other surfaces.
3 years ago, I’ve developed a mixture of various ingredients that does what you mention, just at a different level. I’m pretty low-key about it. Could’ve started a large manufacturing company, but I’ve done that for too many decades. Just happy people are catching on to what helps other detailers be more successful. 🙏🏻
I've done the same in the specialty chemical industry. Dust is static. Simple as that. The process of applying and removing BeadMaker with a microfiber towel creates the charge.
What are your thoughts about using an anti static gun on your car after you get home and parked it? Or grounding the chassis to get rid of static?
Pan... Thanks for sharing. This is great info. Congrats to Jamie for coming up with this solution.
Thanks Joseph!
good idea. I already mixed beadmaker:dreammaker 5:1 in the summer. then paint gloss as a finish. very nice. I have also mixed sonax bsd with adbl wax 50:50. the beading and pearls are fantastic!
Yes, Jamie The Cleaner surprised P&S with trying that combination. I too rarely experienced the dusting issue with BEADMAKER
He should get a reward lol
Some dust? Lol. Yes. Some streaking? Yes. Thanks for sharing info. As I'm watching I'm hoping in your diy that you show us how to add an anti static of some sort.
I think you got your answer. ;)
@Pan The Organizer yuppers. Keep up the good work I appreciate all the info
❤ thanks pan! Pretty cool stuff. I use Titan from Phoenix, Eod. I mean it just makes sense to use the best in the market. So I use it!
I will have to try that. I mix Beadmaker with Absolute to create a waterless wash with a little protection and it has worked great for me.
What a cool idea! I have been doing two applications, first breadmaker and then Dreammaker and the results are fantastic, of course. Here, you have shown how to combine these two products effectively so now I can do a single application. As we all know - in detailing time is money and this is just very cool and efficient. Thanks so much!
Glad it was helpful!
Hi Pan, thanks for pointing me to this tutorial. How often should I use this 'Clean maker' on my ceramic-coated car? And the climate in my country is similar to California. What I want is slickness and gloss but afraid from over protection.
You can use this mix as often as you wish.
I have been mixing my spray on waxes and such for years now with fantastic results.
Man……… I thought you were going to drink the bead maker again before mixing!lol great video and information! You never steer us wrong! Using a lot of their products and impressed each time.
Heheheh thanks man!!
Pan this is great, thanks! I switched from Chemical Guys After Wash to Auto Fanatic’s 007 Gloss Enhancer for my drying aid with your recommendation and I like it more, but both products attract dust. Definitely looking forward to trying this out next!
Great tips Pan as I have never tried this before. P&S makes quality products at an affordable price so this combination is on my list of products to buy. Thank you for another great video!
Thanks Neil! Hope you had a great Xmas!
@@PanTheOrganizer Christmas was my only day off in December but it was nice. I hope you had a great Christmas too! Now I have to get to work setting up an LLC and figuring out processing payments and finding an app for scheduling and building a website. Thank you for sharing your knowledge over the years as it helps a lot!
Excellent pan! 😁 I have 4 bottles of beadmaker & 3 bottles of dreammaker. Let the chemistry begin. 👍🇨🇦
Thanks!
Hawaii Tesla and Detailing put me on to this some months ago. Good to have some more in-depth analysis of this combo!
This is crazy I love both these products but do have issues with BM attracting dust so I started experimenting with mixing them and found that 4 to 1 was better than 1 to 1 but glad to see that the 10 to 1 ratio is even better! Just saved me a lot of time and speculation pan!
why 4:1 was better than 1:1, what did you find?
Thanks for the info!! Maybe P&S should make this mix!!! Have a great holiday!!!
Have a great holiday too!
Hey Pan… John from Boston we met at SEMA this year. We talked about Bead Maker, thanks for the blending tip. I’ll need to wait till spring but looking forward to trying it. All the Best !
Hey John!! I hope you are having a happy holiday season!
I love bead maker but living in Puerto Rico where is summer all year I have the dust issue, will definitely try this to see if there is a notable difference.
I liked the Paaaaaaaaaaaan the organizer opening. Please bring it back.
:)
Great breakdown Pan. We settled on a similar mix known in our business as ‘Gold Maker’ about a year ago when DM first released. It was definitely bore from necessity and is a staple in our IK.
Thanks!
I learn something new everyday, I'll definitely need to try this. I believe I have beadmaker in the arsenal still. Pan excellent video! Happy Holidays!
Happy holidays!
@HawaiiDetailing came out with an Absolute + Bead Maker "Honey Pot" mix that I'm interested in trying. I shelved my Bead Maker this past last year for longer lasting quick detailers. Hopefully this mix can bring some use back to my Bead Maker, which I really enjoyed using.
What quick detailers have you been using ?
@@Tony_Seed Griot's Ceramic 3 in 1, Meguiar's Hybrid Ceramic Detailer, and Sonax Brilliant Quick Detailer. All of these will give me longer protection.
Awesome analytical explaination to induce the purchase of both products. 👍
Glad you enjoyed it! Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 995,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@PanTheOrganizer Thank You 😊
Wauw!!! The solution of my dreams :) have both pruducts and was always hesitating between both as indeed, I love beadm but comes with a bit of dust and streaks, whereas dreamm comes with nice gloss but no protection. Definitely going to try this!!!!
Enjoy and let us know if it works for you Bart!
@@PanTheOrganizer it works :)
Suggestion on a future video or a question; how to redo part of a ceramic coated car? When for example you ve had an accident and part is replaced or repainted, or when you have some undeep scratches.. just an idea ;)
Another great video Pan.
Look forward to trying this mix, really appreciate your research and sharing with alk of us.
Thanks Garry!
Another great video as always. Thank you, I'm going to try this. Looking forward to the results!
Thanks Mike!
Thank you, Pan. I can't wait to try this secret sauce.
👍🏻
I did notice the dust about 4-5 month ago, I did try the 50/50 with dream and bead maker to but as you said the durability was not there, I had tried the griots ceramic 3/1 and did not get the gloss, so I combined all three and happy now,
Did you apply the Griots 3/1, then the bead maker? I’m looking at getting a better base down before bead maker. Griots or turtle wax ice seal and shine or the meguirs hybrid ceramic wax are options I’m looking at
Thanks pan love the info for the DIY at home guys. Will try out this weekend.
Have fun!
Great video Pan, I can't wait to try this combo I hope you and all the family have a lovely Christmas
Thank you! I hope you had a great Xmas too!
Dream maker is awesome. I use it as a drying aid after absolute Rinseless wash and gloss is amazing
It really is!
Very interesting ! Thanks Pan !
Glad you enjoyed it
Ever try mixing Absolute with Dream Maker? My car mostly just gets dusty from being in a carport near a windy/busy street.
Awesome! My own little mix is Griots Ceramic Speed Shine, Adams Graphene Detail Spray, and P&S dream maker all in one bottle. 350ml of GCSS and AGDS, the 40ml of P&S DM. Love the videos!
Thanks Jalen! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 840,000 subscribers and 105 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer honestly Pan I’ve been watching your videos for about a year now and implementing some of your techniques with my great detailing foundation. I thought I hit subscribe months ago and just realized I didn’t. Detailing is my healing space and peace of mind. Just looking back on a vehicle that I’ve touched saying I took it from that to this, just does it for me in my daily life.
6oz Dream maker 2 oz Beadmaker adds a awesome final step to my details
Hello Pan, thank you for the video. I tried this combo on my 2018 black Cadillac and I still seem to attract dust. My ceramic coating is about 12 months but I use Bead/Dream Maker every 2 weeks. Any other products that might help alleviate dust would be appreciated.
Hey Pan, love the channel! I'm a mobile detailer and I've been on the fence about using P&S bead maker vs DIY quick beads. I can get bead maker at wholesale prices at .22 cents/oz which is very appealing however, I feel like its not the end users job to make a product better. I can get DIY quick beads for around .77 cent/oz and I can apply it wet and get 4-6 months protection according to them! Again, the price of bead maker is very appealing but I can't wrap my head around having to buy two different products to make one product perform better. I detail in the desert and my clients can't always wait 8 hour for cure time. Hopefully P&S will see all of the feedback and just make the product perform better and not put it on the end user. Sorry for the rant but wanted to share my thoughts with you! Keep doing what you're doing!
Bead Maker doesn't last very long (3-4 weeks) so Quick Beads will outlast it hands down. We mainly use Bead Maker as a topper over an existing long lasting protection. Bead Maker has the lead over Quick Beads when it comes to gloss and slickness. But in certain situations, some say it attracts dust (I never had such issues where I live). Hence why we add a bit of Dream Maker in the mix to add anti-static properties.
So it depends what you're looking for. Durability and speed of application, Quick Beads wins. Gloss and slickness, Bead Maker all day.
By the way, P&S now produces a limited run of the combined Bead Maker + Dream Maker, and it's called Clean Maker. Here's a link to it: bit.ly/42SEO42
@@PanTheOrganizer Thanks so much for the reply and the insights. Fair points, it's a tough trade off between durability and gloss. If they make this special edition in a 5gal like bead maker I might be a customer. At the current price it's not super economical at 5x/oz compared to bead maker. Thanks for bringing this to my attention! Glad to see they acted on the customer feedback. Cheers.
Trying this as soon as the dream maker comes in next week…cheers pan!
Happy holidays!
This is true for my region, tons of dust) I will definitely try it out by the summer. In general, Blowers helps me 2 times a day.Thank you
I have just circled back to this video. I greatly appreciate the information not just in this video, but in all of your videos. That said, it really is a shame that the Bead Maker formula has not been revised to add anti-static properties. This is particularly true since the owner of the company is the chemist who developed the formula and, therefore, should have the ability to improve the product.
I appreciate the feedback and I hear you!
Hey Pan, I live in Gatineau, Quebec and Bead maker does attracts a lot of dust. I love this product even with the dust issue! It`s an awesome product!
thanks
Great video and tips. I had the dust issues especially after putting Carnauba wax.
Thanks!
Hi! Just wanna ask, do you think I can replace the dream maker with p&s paint gloss showroom spray n shine? Same ratio? Coz I can't find any supplier of the dream maker here in my country.. thanks in advance!
Worth a shot
You'd have to ask P&S.
Excited to try this…thank you
Have fun!
Wow! Wish I'd known about this DIY Secret before now!! Thanks for posting such a GREAT tip, Pan! Question...Do I have to do a paint correction on my car first before applying this DIY combo to really have a showroom-type shine?
Awesome combo Bead Maker + Dream Maker! Great video Pan, as always!
Thank you! Cheers!
Thanks again Pan!.... I'm going to try this
Thanks for watching! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on RUclips as we surpassed 952,000 subscribers and we have over 127 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Glad you followed up on that conversation we had at the TW booth, and also thanks for introducing me to Dave!
My pleasure! :)
Hey Pan what’s your thoughts on P&S paint gloss? I seem to like it as a drying aid when not using the Bean/Dream maker combo. Thx
Thanks for the shoutout Pan much appreciated 🤙🧼 #cleanmaker
You bet!
Very interesting!! Looking forward to giving this a try. Great as always. Merry Christmas everyone and to you Mr Pan thank you.
Thank you! Merry Xmas!
Always appreciate your videos!
I appreciate that! Happy holidays Nathan!
Hey Pan, im in Montreal also, and i dont get dust issues with it but i do sometimes get streaking with BM. Ill try this out, great tip!!
Thanks pan yea I get streaking. I will get some dreammaker. You the man
Thanks!
Hi, would you use this 1:10 mix as a first layer coat (base coat), or would you start with the 'normal route' of a more generous coat of Bead Maker (wait 2-8 hours), and then proceed 're-applying' it with the 1:10 ratio mentioned in the video?
Thanks.
I would use this mix even for the first application.
@@PanTheOrganizer How often should I re-apply this? I noticed you mentioned you don't want to over do it...
Once a week as a drying aid is fine as it’s a light application. One or two sprays per panel.
I haven't seen the gloss enhancers before. Do they really make a difference? If I have a ceramic coating, can you still use it - and does it make a difference on top of that?
Dream Maker does boost gloss more than other regular quick detailers, so I'd have to say yes.
I will definitely try this! I noticed that every time I wash my vehicles roughly 2 hrs afterward they get covered in a layer of dust , so frustrating. I have tried different drying aids.
This could be a good idea. I don't have dust or streaking issues, but I might try a small amount of this to see if it adds gloss above Bead Maker alone.
Thanks Pan. I did not know about this, but now I do!
Thanks for watching!
Awesome video Pan. I have been thinking about this, now u have provided an answer. Gonna give it a try on my daily driver.
Merry Christmas!!🎄🌟🎁
Glad it was helpful!
Hi Pan! Hope you are well. Thank you for sharing this information. Very useful indeed. Would like to see a demo of you applying this formula and see how it beads etc. Would that be possible? I wish you and your family a very Merry Christmas. Take care. 👍🎄🎅
Merry Christmas!
Pan, I completely enjoy your videos and always appreciate the education you supply with it. So, possible dumb question. Is there any issue with using Beadmaker each time you dry the vehicle?
You can use Bead Maker as a drying aid after each wash, no problem.
And thanks for the kind words about my videos Jeffrey!
Pan, can this combo be applied right after a fresh ceramic coat? As in I plan to use Gyeon Syncro Evo and top with Gyeon Cure. Can this go right on after or should I wait a week?
Thanks pan for this info. Couldn't agree more about using metric. What's to learn. Could you also focus a bit more on the UV component of these products because once again it's getting near 40 deg C here in Australia. We need to put sunscreen on our cars. Thanks
Thank Pan, Love this kind of stuff.
Thanks Charles!
Can this mix be used as the lubricant for use with the clay towel?
Yes The Rag Company did a “clay and seal” video using Bead Maker with a clay media here: ruclips.net/video/CQMRvBCCFqA/видео.htmlsi=zvNqLfKHNQLlvlvv
@@PanTheOrganizer that video you linked is with defender and bead-maker which saying you can mix them and she does another video that says they bead-maker and defender cant be mixed.
@ in the video its bead-maker and defender that she is using but another video she says they cant be used together.ruclips.net/video/FmG94EPMbq4/видео.htmlsi=lJ7UaJqK9Xod2zd1
Great info pan as I have also had some dust collecting issues.
Hopefully this will work for me on my Diy personal vehicles.
I’m also really surprised if this works so well why p&s hasn’t done this combo for the market. I do understand marketing and product sells but come on p&s help out consumers and bring to maker “BEAM MAKER” 😂😂
Love the videos,,,keep them coming,,I have a c7 corvette and it seems to attract dust more than my other cars,,does the plastic/fibreglass/carbon fibre add to the static attraction of dust? Love your Porsche and the color,,,,
I love bead maker as a drying aid but shy away from it as a sealant, thanks for the great tip definitely will have to try it now I’m just waiting for them to release a car wash infused with bead maker
Great video! Good tip and trick! Always learning something new.
Thanks man!
Combo has been my go to the last 10 months…very pleased with the results on my ceramic coated, 2023 Molten Pearl IS500
It doesn't last more than one month, so you likely mean that you have been applying this regularly for the past 10 months right?
Yes…a 5yr ceramic was professionally installed when I purchased it…use the Combo as an amplifier/topper every other wash. Literally foam/rinse, repeat foam rinse and blow dry (purchased an Ego last week and the short car attachment (thanks for that recommendation). Then hit the car with the combo. I have noticed it’s a bit finicky when the humidity is high). But the gloss is top tier!
All this sounds great. I agree customer service with p&s is outstanding. Products are outstanding. Has anyone used a gloss meter on this mix vs applying bead maker by itself? Or even bead maker then dream maker separately? I'm curious what the gloss meter would say
Pan, would this work well on a satin vinyl wrap? Thank you sir.
I would only recommend this on glossy surfaces. This is a glossy product. Matte and satin are different finishes.
Hi Pan.. do I still need to wait for this mixture to cure in my painted panels after application?
For the first application, Bead Maker needs to cure 8-10 hours on the surface according to P&S. After that, when you do regular maintenance using it as a drying aid or quick detailer, no curing needed.
@@PanTheOrganizer thanks for the input 😊
Awesome video/product review/content good friend
Thanks Richard! Merry Xmas!
@@PanTheOrganizer ubas well good friend