I know all about that. Still trying to solve this issue. I got kicked off of platforms for being stupid, cuz I pressure washed my engine bay. Kind of gave up on the truck, but I have not done anything to it since. 16k wasted between truck and parts. ruclips.net/user/shortsOKMsb95zbDg
Got my 10mm stroker from exergy, my brother in law Chris was on fire punk and he make a little over 2000hp with his Cummins and they got me hooked I bought all exergy injectors feed tubes and the CP3 great stuff! Keep it up firepunk! I’ll also be getting you’re tunes for my build 😎
Love videos like this. Iv had so many questions about what i need for my power goals and with this and previous videos you guys have basically answered all of them. Now i just need to win the lottery lol
So dependent on what your turbo setup currently looks like, this cp3 should accommodate later future demands or is it better to match a pump to meet near future builds?
im looking for the blue dually built by firepunk.. the owner is a hispanic man that owns a concrete buissnes in lexington ky.. it sounds bad ass.. i assume its a 6.7 i belive its the last year you could get a stick...
I know that this is super off topic, however I gotta ask... Whats the best fuel pump for a hotshot setup in a Ram. Looking for longevity more than performance.
can you guys do a video explaining what us guys with the 24v 5.9 can do to motor and trans to safely tow and keep up with these new trucks pushing near 450-500 hp from the factory. I love my 2006 5.9 megacab but have been debating whether or not i should put money into the ole girl or buy something new.. HELP!!!
The reason I ask is because I know y’all just dyno’Ed Chris gelbaughs truck and made 2000hp but that was with dual 12mm pumps so what would be the advantage to that rather than a single 14mm
Can anyone explain the difference between the 14mm race and 14mm street pumps? Thinking maybe it’s that gear driven pump on it but haven’t been able to find a good description
Does anyone know if it is bad to go overkill on a pump while waiting to get injectors? I've got an 05 with 100% overs and found a good deal on a 14mm but not sure if it'll run like shit with only 100%'s
@Eric, have a 14mm brand new exergy i was a week out from putting on my 06...then, my wife totaled it. Will let it go for $1500 obo. Brand new, literally still in the box.
Please make more of these short videos with lots of information. Saves us time from digging into the forums and getting made fun of!
I know all about that. Still trying to solve this issue. I got kicked off of platforms for being stupid, cuz I pressure washed my engine bay. Kind of gave up on the truck, but I have not done anything to it since. 16k wasted between truck and parts.
ruclips.net/user/shortsOKMsb95zbDg
Got my 10mm stroker from exergy, my brother in law Chris was on fire punk and he make a little over 2000hp with his Cummins and they got me hooked I bought all exergy injectors feed tubes and the CP3 great stuff! Keep it up firepunk! I’ll also be getting you’re tunes for my build 😎
Love videos like this. Iv had so many questions about what i need for my power goals and with this and previous videos you guys have basically answered all of them. Now i just need to win the lottery lol
Another home run in great information! Thanks for educating us.
I was literally just wondering this yesterday! Perfect timing!
I'm looking to blow the tips off my stock injectors... triple 14s??
Not enough, add a 4th
One 14 for each injector. I'd recommend pulling the nozzles completely off and reinstall the injector body without them too
These videos are awesome. Keep em coming 👍
Great job man. Great info. Keep up the great work
So much explained. Thanks for the easy explanation. Keep up the awesome job
Always good content and lots of usefull info!!
So dependent on what your turbo setup currently looks like, this cp3 should accommodate later future demands or is it better to match a pump to meet near future builds?
Like a singer pointing to the notes they are singing, Every time lavon mentions rpm his arm becomes a tach.
Great info, I would have like to see some info about having bigger pumps street driven, and longevity. Just a question I see come up a lot
No problem with longevity at all with Exergy pumps
im looking for the blue dually built by firepunk.. the owner is a hispanic man that owns a concrete buissnes in lexington ky.. it sounds bad ass.. i assume its a 6.7 i belive its the last year you could get a stick...
I know that this is super off topic, however I gotta ask... Whats the best fuel pump for a hotshot setup in a Ram. Looking for longevity more than performance.
But wait their's more call in the next five minutes and we'll throw in two, that's right two, cans of monster for free.
Only applies to staff members.
on the 12mm pump how is the fuel line modification?
can you guys do a video explaining what us guys with the 24v 5.9 can do to motor and trans to safely tow and keep up with these new trucks pushing near 450-500 hp from the factory. I love my 2006 5.9 megacab but have been debating whether or not i should put money into the ole girl or buy something new.. HELP!!!
Can you talk about the cp3 swap for the 5th gen Cummins
Lavon,
With a 14mm being able to support so much power, is there any advantage to running a dual cp3 set up??
The reason I ask is because I know y’all just dyno’Ed Chris gelbaughs truck and made 2000hp but that was with dual 12mm pumps so what would be the advantage to that rather than a single 14mm
@Landon Schad true but the point of my question is if a single 14mm pump can do that why buy multiple stroker pumps for a truck that is 2khp or less
Can anyone explain the difference between the 14mm race and 14mm street pumps? Thinking maybe it’s that gear driven pump on it but haven’t been able to find a good description
Yes its the gear driven pump that assists with high tpm fueling
Are the ratings for these cp3 pumps for cummins comparable to a cp3 for a duramax?
What's a duramax?
Could you use a 14 mil cp3 for a 800 horse power truck . Provided you have the extra dough to spend for it
Yes, just tune accordingly and have plenty of room to grow
Getting famous off of comments day 282, so I can live the dream, live every day like it’s your last🤙🚀
Does anyone know if it is bad to go overkill on a pump while waiting to get injectors? I've got an 05 with 100% overs and found a good deal on a 14mm but not sure if it'll run like shit with only 100%'s
Shouldn't hurt with appropriate tuning
@Eric, have a 14mm brand new exergy i was a week out from putting on my 06...then, my wife totaled it. Will let it go for $1500 obo. Brand new, literally still in the box.
@@wellthen6177 willing to ship?
@@alexfournier8686 of course, man! How is a better way to get in touch with you?
@@wellthen6177 email? Instagram?