Good god I wish I was there I have a deer story... Long story short, Our village idiot (s) happen to be twins. They shot a deer..didn’t kill it..k-O’d it. Loaded it in the back of a full size jimmy, it came to life in 4 lane traffic on the highway. I was about 5 vehicle lengths behind. All I saw was muzzle flash and brake lights lol
Awesome videos! I would love to see a video on the air controller for fmvb transmissions. I’m going to be putting one in my car in the future and would love some more info on it! Thanks!
Iam getting a Sneed speed manifold and he will drill and tap on all 6 cylinders so I will have a prob for each port and a second Gen swap. So I fly GA or just small piston engine and we put a high dollar fuel injectors and they give you how much fuel you flow per cylinder and how much fuel is returned and the egt’s for each cylinder but you can not aford this system for my 5.9 diesel and I have pets only stopped the run up on the engine so I don’t burn a injector and if I didn’t have this system I would of ruined a very expensive engine. So Iam going to check in to exspermental engine monitor which can cost a fourth as much as a certified. So if I can get this experimental engine monitor system so that’s the direction I will be going so I hope I can get this for my 05 Dodge 3500. So if this saves one motor it will pay for its self, quick !
So got a he351 that's 67/67/9 but also says 76/67 turbine wheel. Noticed 467.7 has a 83 turbine wheel. Does the turbine size effect it that bad both being 67mm turbos. Guess my point is, is a 467.7 gonna make more reliable power than the he351 around 800hp
The information is great could you please help me with my 1999 24 v a turbo to go with my standard turbo so I can compound setup for towing as I live in Australia. Thanking you peter prange
What's the best turbo upgrade for 06 5.9 with air filter powerflo lift pump efi live max effort 180 over stock Top notch quality on all your videos and reliable info. Thank you
They are not new, the clean air act has been in effect for 3yrs, it's just now being brought to the attention of the general public since a few large businesses have been investigated. So the only thing we change is look at all our work, and make sure our jobs comply with the standards and work towards developing better equipment we can use to make horsepower with carb and oe parts.
Can i get some insight on what turbo would perform the best for my setup. 01 24v. Stock vp44, hx40, 125hp injectors. Stock trans with a billet single disk converter. Turbo seems lazy and unresponsive. I believe it has a non wastegated hx40 on it now.
Some where a PETA member’s head just exploded hearing Scrug’s deer story.
How do you guys not have 100k subs?? You guys have been putting out good videos and great content. Keep it up!!
Good explanation of turboese for us beginners, thx another great vid...Hope to meet you guys at Rudy's this Weekend.
Do another turbo vid in depth and explain how twin and Tripp’s turbo , how they work together
Good god I wish I was there
I have a deer story...
Long story short,
Our village idiot (s) happen to be twins.
They shot a deer..didn’t kill it..k-O’d it.
Loaded it in the back of a full size jimmy, it came to life in 4 lane traffic on the highway. I was about 5 vehicle lengths behind. All I saw was muzzle flash and brake lights lol
I have a Duramax and I love this channel. So much information. Keep up the good work.
Awesome videos! I would love to see a video on the air controller for fmvb transmissions. I’m going to be putting one in my car in the future and would love some more info on it! Thanks!
Just hearing that Deer story , hit the like ! The rest is just a bonus! Thanks.
Hey thanks for explaining turbo sizes. Great videos!!!!
Thus type of explanation for injector sizes would be great! Like 100%, 150%, 400% injectors... and what’s that mean relative to 50hp injectors?
Exducer on turbine is the smaller diameter, inducer is larger. Opposite on compressor.
I wonder what every day is like at firepunk if it like the deer story I’m in
Good video as usual !
Great info👍🏻👍🏻
Dude came in for tune and came out with a 10k dollar bill!
Nice video!
wow. you guys are awesome!
Iam getting a Sneed speed manifold and he will drill and tap on all 6 cylinders so I will have a prob for each port and a second Gen swap. So I fly GA or just small piston engine and we put a high dollar fuel injectors and they give you how much fuel you flow per cylinder and how much fuel is returned and the egt’s for each cylinder but you can not aford this system for my 5.9 diesel and I have pets only stopped the run up on the engine so I don’t burn a injector and if I didn’t have this system I would of ruined a very expensive engine. So Iam going to check in to exspermental engine monitor which can cost a fourth as much as a certified. So if I can get this experimental engine monitor system so that’s the direction I will be going so I hope I can get this for my 05 Dodge 3500. So if this saves one motor it will pay for its self, quick !
Do a video on how you come up with your compound and triple match ups
So got a he351 that's 67/67/9 but also says 76/67 turbine wheel. Noticed 467.7 has a 83 turbine wheel. Does the turbine size effect it that bad both being 67mm turbos. Guess my point is, is a 467.7 gonna make more reliable power than the he351 around 800hp
The information is great could you please help me with my 1999 24 v a turbo to go with my standard turbo so I can compound setup for towing as I live in Australia. Thanking you peter prange
Talk to power driven diesel. They have a dealer getting setup in aus if I'm not mistaken
What's the best turbo upgrade for 06 5.9 with air filter powerflo lift pump efi live max effort 180 over stock Top notch quality on all your videos and reliable info. Thank you
We all have that one buddy.. biggest buck I've ever seen!!! Haha shits oozing out his 👀
Firepunk Shop full of rock stars you get what you pay for simple as that
How do we get our vehicles into you guys???
Lol great intro 😂👍🏼
Is one of those mine @0:36? Im excited to get the infamous golden nugget Firepunk Transmission in my 96 soon!!!!
Dibbles will be finishing yours in the morning!
@@FirepunkDiesel You all are the best team out there. I know Dibble has all the secrets. Thanks to all of ya!!!
What you are you going to do about the new epa laws?
They are not new, the clean air act has been in effect for 3yrs, it's just now being brought to the attention of the general public since a few large businesses have been investigated. So the only thing we change is look at all our work, and make sure our jobs comply with the standards and work towards developing better equipment we can use to make horsepower with carb and oe parts.
This all sounds expensive. Where abouts?
Can i get some insight on what turbo would perform the best for my setup. 01 24v. Stock vp44, hx40, 125hp injectors. Stock trans with a billet single disk converter. Turbo seems lazy and unresponsive. I believe it has a non wastegated hx40 on it now.
I have a question, what’s #LDN on that’s on a lot of the trucks?
You'll have to ask 7.70 racer Ryan Riddle, he coined the hashtag.
Loud Dodge Nation!
So the Quad Cab has a turbo with a 488mm compressor wheel????? You spit out that number then didn't explain it.
S488 is s400 frame, 88mm compressor wheel
@@FirepunkDiesel Thanks for the info. I'm impressed that you responded to a 3 year old video. 👍
What grit stone do you guys use on blocks and heads?
Do you all offer drop in valve body’s?
For a 47re
Yes, all valve bodies are built from stock cores, so we remanufacture them, upgrade shift strategy and line pressure and ship them out.
Ok what would be the best way to contact you all got a stock trans just a good converter needing something to support 400hp and keep trans alive
Email rick@firepunk.com or call the office 614 733 3744
😆😆
10 foot pole 😂
1