Don't know if you read this but anyway, thank you Sean, you are life saver. Just got few days ago my first compound bow (cruzer g2). Here where i live (Poland in Europe) for every 100 archers there are only 5 maybe 10 but not more compound archers, most ppl here shoot recurve, longbows or asian. Shops here are pretty decent and guys there can fix and tune your bow (recurve, longbow and asian) but its hard to find someone who knows how to really tune compounds and if you find shop where they do it properly, you must go at least 100 miles to them. So i have bought all the tools i need to tune my bow but i must learn how to do it, most of the manuals are pretty vague. So considering all above i want to thank You again, you are life saver especially for a new guy with compound like me. Thank you and God Bless.
Thank you for your very informative and instructional videos, both on the tuning and the review on the Bear Cruzer G2 Sean. It helped me sort out my cam alignment and timing, as well as getting the other stuff square. That tuning made a good bow great. Well done mate.
Thank you for the tuning video. I bought the bow a couple of years ago getting some specific tuning advice about the bow is great. Had the same issue with the peep sight, the top string holding it down came undone. Here are a few minor things I noticed. String arrester needs to be monitored to make sure it does not move, even after using loctite on the screws holding it. Really have to be careful tightening the pins on the pin sight. By over tightening one of the pins I deformed the plastic so the it is a lot harder to adjust that pin in the location. Very small adjustment are almost impossible. All that being said I like the bow and happy with it, and was successful hunting black-bear with it.
getting back into archery, picked up a G2 cause the price point is perfect and you get some bang for the buck. I really appreciate this in-depth video! Subscribed for sure.
Sean, i bought a used G2 earlier this year and was super excited to get back into bow hunting (as i have been out of it for almost 15 years). While doing my best to tune it, catastrophy struck and the bow exploded in my hands. The riser snapped. Thankfully nobody was hurt- as i was drawing it back in the living room and my wife was only a few feet away. I contacted Bear and told them what had happened. They said i could send it in and they would give me a cost for repair. Bear comes with a lifetime warranty to the original owner but is not transferable. Bear went above and beyond- they sent me a completely new bow- free of charge. I have it paper tuned now and getting ready to start sighting it in. Your videos are coming in handy for me. I also love the scripture verses. What a great way to use your God given ability to spread the Gospel!
Wow I’m definitely glad no one was hurt!!! I’m also happy to hear that they replaced the bow for you! Praise God! Lastly, thanks for the compliments! God bless you.
Really good video Sean. Appreciate all the effort and time you put into what you produce. There needs to be more channels like yours on here. I don't have a bow press so it's difficult or impossible to do some of this at home but the smaller things are really good to know. Also nice to have the knowledge of how to do the rest so that if you take it to a shop for adjustment you know all of your needs are being addressed.
Sean, I've noticed both my Bear G2 Cruzer and Bear Paradox string stops move / twist off the string after shooting the bows after 20 plus shots. It doesn't seem to matter how tight I set the two screws that fix the string stop in place. Any suggestion or fix much appreciated.
Sounds like you may have too much cam lean toward the other side..this can be fixed by adding twist to the correct yoke or shimming the cam when a bow does not have yokes.
Do I have this right? If your bottom cam is hitting BEFORE the top cam, then you add twists to the BOTTOM cam's cable (is that the cable end coming in from the top cam?). That will increase the top cam's rotation, right? And vise versa.
Hey Sean just bought the Bear G2 the one they had on display and i noticed that when i got home went through the step i go to draw back and seems like the string wants to break and the cams do not move. It that it's on the number 26? What do i did
Without seeing it it is really hard to say what is going on. I would take it back to where you got it and show it to them. Maybe they can see what the problem is. Also, make sure that the there are no zip-ties on the string. Sometimes they put those on the string to prevent them from being drawn back in the store. God bless.
Sean, I’m using my new G2 Cruzer I noticed today that the string suppressor slides very easily, almost falling out by gravity - out of the socket. Upon closer inspection it appears that the set screws for the string suppressor are missing. I check my daughter’s g2 and they are missing too - completely different dealer. Is this right? Hers isn’t loose like mine, but I aim to call Bear tomorrow and get at least 6 set screws from them. Thoughts?
Verify by putting a hex wrench down in there and turn to make sure they are not there. I once had thought a bow was missing them then but was surprised to find they were there once I started turning. I'd they aren't there then definitely get some. God bless.
Thanks Sean, initially i thought the same, but I could see the threads in the socket. I called Bear this morning. Man, great guys, they told me they had an older production run where those screws were missing. We both got our bows on amazon, (we live on an island some stuff is hard to get-especially during coronavirus) and being that they were on Amazon leads me to believe that they might be an older run. Anyway they are going to send us set screws and additional suppressors. Something I feel they did not have to do. Still love the bow though! Vivat Christus Rex!
Hi Sean I have a 28.5 draw length as per measure from my wingspan of 71 inches. Should I round up to 29 or round down to 28 for my draw length? Thank you
It will all depend on how you anchor. I’d suggest testing a bow out at all of the various draw lengths you questioned and see which feels best for the way you are anchoring.
Hi. What arrows would you recommend with this bow set up at 50lb ?? Just ordered mine online. Im 5'8" tall. Thanks in advance. Great videos. Im a beginner.
Great vid thanks. Just bought one of these as a back up, set it to my draw length of 26” and it has no valley when I draw back, it wants to rip my shoulder off if i even slightly let up. I’m used to the nice valley of my Halon. Is the valley adjustable on the cruzer gt?
Great videos, Sean. I wish I had come across them before ordering my Cruzer G2 so I could get you the 'kickback' as you called it. I feel like I lucked out to have picked a model detailed (and recommended) so well by you. But I may be buying a couple tools using your links and realized the bow vise link is no longer working. Can you update it?
Hello Sir, Thx for your video. May i ask you something ? Years ago i bought a Hoyt Carbon Matrix. It is 50 till 60 pounds. Due to an accident have not shoot for years. Also i have to be carefull with my spine. But i missed shooting. But due to a heavy accident lost a lot of my muscle. And can't hardly pull 50 pounds at the moment. Maybe 5 times after another. Buying another bow that has a drawweight of 40 till 50 pounds is loosing a lot of money. Cause within 6 months i will probably be able again to shoot at 50 pounds and that maybe 30 shots. Is there a good quality compoundbow that is also a pro bow but that has an adjustment from 40 till 60 pounds ? So i can invest in a gokd quality bow and that i use foor years ? F.e. just as good as nxt ? The Hoyt Carbon Matrix is a solid good bow. But i think it is not a smooth bow. In time thjs will be ok but for now i could hurt myself. Broke 4 spines in my back. It could be that after awhile i have to quit shooting. But at the same time shooting a bow could be good for me. While building up muscle in the back. I have a lot of muscle atrofie. Muscle that died. Or maybe i could replace the bolt for a slights longer ones and give the arms three or four extra turns ? I am not sure that this is even safe to do. I do not care if the arrow only gets 20 meter. I would be glad that i could use up strenght and as soon as possible replace the bolts to the original ones. I find it very btw that bows have only incrementals of ten pounds. Why not f.e. a drawweight from 40 till 60 pounds ? I have looked at pse , hoyt , Martin. But the more pro bows only have 10 pounds adjustment. And from what i have read i think that pse has the smootest pull. So maybe a pse is the best for me. I never have shot another bow then my Matrix. And maybe this is a very stupid question. But could it be possible that a pse ntx at 50 pounds could be easier to pull then my Matrix at 50 pounds ? Logic must say that 50 pounds is 50 pounds. Maybe you have a thought about that. In my surroundings i do not have the possibility of a shop. So buying another bow is all on me and by what i learn from other pro people.
I honestly think you should look at the Elite Ember. They have it marketed to an audience as a mid priced bow, it is a very nice bow for the money. I did a review on one years ago and I was very impressed with it for the price. It also has a very long draw weight adjustment range. I pray for God to bless you and help your muscles heal.
@@seansoutdoors Thank you. I will look into that bow. To be true it is more the spine that is the problem. Broke it years ago on several places. Need 400 mG Oxy to get through the day. For years. A few years back stood on a ledge 30 meters above ground for a hour. But walked/stumbled away instead of the original plan. Sadly it is not possible to operate due to the complexity and very high risc. And the future is not so bright. Not for anyone. Not so much into the Biblical stuff. But due to a specific education i know that some terrible things soon will happen throughout the world. But people do not see that. Maybe that is for the best. Not sure about that to be honest. Almost every person will be fully monitored throughout every aspect of his or hers life. In the Netherlands thjs year they will start with the European Digital Identifcation. In Sweden they start with a Carbon Footprint Monitoring system controlled by the government and the bankingsystem. Also combined with healthcare. And in Spain this year they will start with a centralised digital Euro currency. In 2024 France and Germany have to follow and in 2026 every country in Europe and by that those three systems will be combined. At the same time it will be rolled out to Canada and Australia. Also the US and the UK. In Europe they have already made deals between the bankingsystems and the larger groceries. A certain deal is about that all people have to be chipped before 2030. It is completely worked out already. Also that every major grocery has to install 400 till 450 camera's. And with that every purchase will be automatically billed on leaving the shop. But by then it is possible that your account will be blocked because of a persons max carbon footprint. A.I. can block your account or that you cannot pay anything when f.e. youre futher away from your home then 5 km'ter. It is an incredible complex system and by that there is nothing you can do. No possibility to fight fkr any freedom. Cause they can instantly block your way to keep alive. Even much worse then the Social Crediting System in China. It is Elons goal to use Twitter for every transaction that comes along with the use of that system. He buying Twitter has nothing to do with free speech. It is just a cloak. So people will see it when it is to late. I have read documents that getting chipped is ojt of free will but if you say no then you can not buy anything. Not even have a job. So everyone will be forced to accept it and be chipped. The world is quickly going to be replaced into something where 99 percent of the people have to suffer. While it serves no purpose for the climate at all. Very weird things are soon to be happening. If people would see it and understand the complexity of that system they still could do something against it. But once it is operational then a potential fight is lost before it even started.
Did you have any problems with the draw length on this bow? I bought this bow for my girlfriend. When I went to tune it, I found that that draw length was about 1 1/4 " long. I ended up buying new strings for it because I couldn't get the draw length corrected, but I got the same results with the new strings. I did so much twisting on the canes and strings with no success. Then I have up and just accepted the draw length had to be set shorter to get the draw length I want.
I recently watched your video comparing the 🐻 legit with the G2. I went ahead ad bought the legit special edition. Is it the process to adjust a legit ? That's for your help!
Sean, I've always heard that a boat performs it's best at its peak draw weight. A 60-70lb draw weight bow performs better at 70lbs instead of let's say 65 lbs. What do you think? Since I've gotten a lil older and bows have gotten faster, I've drop my draw weight from 70 to 60 on my bows and shot 60 lb limbs. The last CPL of Mathews bows ive had with 60 lbs actually topped out at 62 lbs.
That is what even the manufacturers say. Some bows have a much larger drop in efficiency than others. I think Prime bows were the worst in efficiency drop the year I tested for efficiency. Some bows didn’t have much if any drop.
If I worry about my top cam, as you said, it will be fine, but the cable touches the comb easily ... is that very bad? Thank you for a good video about G2 Cruzer!
How I tune the timing, my bow is double yoke system the top cam move first when I released slowly and follow by bottom that's mean the bottom cam hit the cable first when I full draw
Man, I shot a cruzer g2 and I realy Love that bow. Changed string and Cables and now the bottomcam is in line, but topcam not. When I tried to fix this like you explain got to turn the jokes 6 -8 full turn but now the other jokes touching the cams at right Side (lefthand bow ) Any idea what happend and how to fix this ? Thanks man and keep goin like this ...
Make sure your cables are properly in the cable slide before you look at cam lean. That can impact how much cam lean it looks like. If your other cam is now off just add a little twist where needed to bring it back in.
Can this bow be taken apart without a press?. I know this is an old video but I've been watching almost all of your videos in the last few days and I thank you very much for all of the excellent information.
Probably. I haven't tried it and they warn to not turn the limb bolts more than 10 or 12, I can't remember the exact amount so you'll need to double check that. I'd suggest turning them the amount and see if the string or cables pop off at that amount. Some of the other brands I've worked on similar to this will come off and then you can work on the bow...
Awesome. I took my first deer with mine. That video is going to air in about a week although I don't think I talked about the bow in it. It will be the 5 pointer in the antler stories series I'm about to post. God bless
How about a white background? Did you review your video before publishing? You point to components on your bow which leads me to believe you want a visual, but your background is the same as your bow which reduces the visual aide. Why wouldn't anyone consider this?
This is probably the best and clearest explanation I’ve seen
Thanks!
Don't know if you read this but anyway, thank you Sean, you are life saver. Just got few days ago my first compound bow (cruzer g2). Here where i live (Poland in Europe) for every 100 archers there are only 5 maybe 10 but not more compound archers, most ppl here shoot recurve, longbows or asian. Shops here are pretty decent and guys there can fix and tune your bow (recurve, longbow and asian) but its hard to find someone who knows how to really tune compounds and if you find shop where they do it properly, you must go at least 100 miles to them. So i have bought all the tools i need to tune my bow but i must learn how to do it, most of the manuals are pretty vague. So considering all above i want to thank You again, you are life saver especially for a new guy with compound like me. Thank you and God Bless.
That’s great. Thank you and God bless you too!
God bless you too brother i just got my bear c g2 first bow ever and you broke down this bow for me thank you!
Awesome! Enjoy it!
Outstanding video. You showed me right away that my cams were a little out of alignment.
Excellent,! Glad to hear it!
Thank you for your very informative and instructional videos, both on the tuning and the review on the Bear Cruzer G2 Sean.
It helped me sort out my cam alignment and timing, as well as getting the other stuff square. That tuning made a good bow great.
Well done mate.
Thanks!
I really like the scripture verse idea for your drawing. We need more RUclipsrs like you
Thank you so much!
I agree I am a brother in Christ and youtuber.... Blessings
@@Onedayoutdoors thanks friend.
Thank you Sean! The center shot card setting is a great tip. That was driving me nuts for years.
Lol glad it helped!
Thank you very much for the effort and work you put into this videos to educate many of us ! Many thanks Sean!
You're welcome!
Thank you for the tuning video. I bought the bow a couple of years ago getting some specific tuning advice about the bow is great.
Had the same issue with the peep sight, the top string holding it down came undone.
Here are a few minor things I noticed. String arrester needs to be monitored to make sure it does not move, even after using loctite on the screws holding it. Really have to be careful tightening the pins on the pin sight. By over tightening one of the pins I deformed the plastic so the it is a lot harder to adjust that pin in the location. Very small adjustment are almost impossible.
All that being said I like the bow and happy with it, and was successful hunting black-bear with it.
Glad you are enjoying it.
getting back into archery, picked up a G2 cause the price point is perfect and you get some bang for the buck. I really appreciate this in-depth video! Subscribed for sure.
Thanks . Enjoy it
Sean, i bought a used G2 earlier this year and was super excited to get back into bow hunting (as i have been out of it for almost 15 years). While doing my best to tune it, catastrophy struck and the bow exploded in my hands. The riser snapped. Thankfully nobody was hurt- as i was drawing it back in the living room and my wife was only a few feet away. I contacted Bear and told them what had happened. They said i could send it in and they would give me a cost for repair. Bear comes with a lifetime warranty to the original owner but is not transferable. Bear went above and beyond- they sent me a completely new bow- free of charge. I have it paper tuned now and getting ready to start sighting it in. Your videos are coming in handy for me. I also love the scripture verses. What a great way to use your God given ability to spread the Gospel!
Wow I’m definitely glad no one was hurt!!! I’m also happy to hear that they replaced the bow for you! Praise God! Lastly, thanks for the compliments! God bless you.
I just found your channel as I am thinking of buying a G2... the moment you incorporated a scripture verse, I subscribed. Good on you!
Praise be to Jesus, thank you. God bless you
Really good video Sean. Appreciate all the effort and time you put into what you produce. There needs to be more channels like yours on here. I don't have a bow press so it's difficult or impossible to do some of this at home but the smaller things are really good to know. Also nice to have the knowledge of how to do the rest so that if you take it to a shop for adjustment you know all of your needs are being addressed.
Thank you
SUBSCRIBED! Outstanding Video helping Bow Hunters and sharing God's Word! Positive Energy!
Thanks, praise the Lord.
Wow. Great video. Really appreciate it.
Thanks !
I love my Cruzer G2. Took a whitetail this past season with it. They go for 549.99 here in Canada and I think its worth it.
Great
God bless
Great channel.
Thanks
Nice little bow
thanks
Sean, I've noticed both my Bear G2 Cruzer and Bear Paradox string stops move / twist off the string after shooting the bows after 20 plus shots. It doesn't seem to matter how tight I set the two screws that fix the string stop in place. Any suggestion or fix much appreciated.
Sounds like you may have too much cam lean toward the other side..this can be fixed by adding twist to the correct yoke or shimming the cam when a bow does not have yokes.
the little kno
b on those levels usually has a groove under it to slde string on and it holds square on that
👍
that is what I have been waiting for, THX!
you are welcome
Do I have this right? If your bottom cam is hitting BEFORE the top cam, then you add twists to the BOTTOM cam's cable (is that the cable end coming in from the top cam?). That will increase the top cam's rotation, right? And vise versa.
Yes
God bless Sean
Thank you, God bless you as well.
Hey Sean just bought the Bear G2 the one they had on display and i noticed that when i got home went through the step i go to draw back and seems like the string wants to break and the cams do not move. It that it's on the number 26? What do i did
Without seeing it it is really hard to say what is going on. I would take it back to where you got it and show it to them. Maybe they can see what the problem is. Also, make sure that the there are no zip-ties on the string. Sometimes they put those on the string to prevent them from being drawn back in the store. God bless.
@@seansoutdoors thank you sir
Sean, I’m using my new G2 Cruzer I noticed today that the string suppressor slides very easily, almost falling out by gravity - out of the socket. Upon closer inspection it appears that the set screws for the string suppressor are missing. I check my daughter’s g2 and they are missing too - completely different dealer. Is this right? Hers isn’t loose like mine, but I aim to call Bear tomorrow and get at least 6 set screws from them. Thoughts?
Verify by putting a hex wrench down in there and turn to make sure they are not there. I once had thought a bow was missing them then but was surprised to find they were there once I started turning. I'd they aren't there then definitely get some. God bless.
Thanks Sean, initially i thought the same, but I could see the threads in the socket. I called Bear this morning. Man, great guys, they told me they had an older production run where those screws were missing. We both got our bows on amazon, (we live on an island some stuff is hard to get-especially during coronavirus) and being that they were on Amazon leads me to believe that they might be an older run. Anyway they are going to send us set screws and additional suppressors. Something I feel they did not have to do. Still love the bow though! Vivat Christus Rex!
@@SJ-xf9ni GREAT, I'm glad to hear it! Enjoy shooting.
Hi Sean I have a 28.5 draw length as per measure from my wingspan of 71 inches. Should I round up to 29 or round down to 28 for my draw length? Thank you
It will all depend on how you anchor. I’d suggest testing a bow out at all of the various draw lengths you questioned and see which feels best for the way you are anchoring.
Mike Palicte I know im a little late, but I would set it at 28, and fine tune your dloop length.
My string stopper / decelerator on my g2 has fell out and come loose after shooting , can I still shoot without the stopping aid ? Thanks!
If what I think you are talking about is actually what you are talking about then yes, but I'm not familiar with your terminology of parts.
Hi. What arrows would you recommend with this bow set up at 50lb ?? Just ordered mine online. Im 5'8" tall. Thanks in advance.
Great videos. Im a beginner.
At 50 pounds you may want a 400 spine.
hey sean quick question
63lb draw weight and a 28.5” draw with a 400 fmj easton. is that ok? arrow i think is 29 or 30”
Look online an see there arrow shaft guide easy to find always should now min an max si yoi find what performs best good luck
Should be. Did you check The arrow selection guide on their website?
How far do you shoot from when testing with the paper? First sight distance or just 10 yards?
I do multiple distances . Close and then ten yards to start.
Great vid thanks. Just bought one of these as a back up, set it to my draw length of 26” and it has no valley when I draw back, it wants to rip my shoulder off if i even slightly let up. I’m used to the nice valley of my Halon. Is the valley adjustable on the cruzer gt?
No, but make sure both mods are on the same setting. If one is off a little it will feel like no valley.
Great video, hope you don’t mind if I use it as a reference for training. God bless.
Great. No I don’t mind at all
I don’t mind at all. Glad it helped
Nice video even if you didnt buy a bear cruiser this all applies..😁😁😁
Thanks for watching.
Great videos, Sean. I wish I had come across them before ordering my Cruzer G2 so I could get you the 'kickback' as you called it. I feel like I lucked out to have picked a model detailed (and recommended) so well by you. But I may be buying a couple tools using your links and realized the bow vise link is no longer working. Can you update it?
Great, thanks!
Hello Sir,
Thx for your video. May i ask you something ? Years ago i bought a Hoyt Carbon Matrix. It is 50 till 60 pounds.
Due to an accident have not shoot for years. Also i have to be carefull with my spine. But i missed shooting. But due to a heavy accident lost a lot of my muscle. And can't hardly pull 50 pounds at the moment. Maybe 5 times after another.
Buying another bow that has a drawweight of 40 till 50 pounds is loosing a lot of money. Cause within 6 months i will probably be able again to shoot at 50 pounds and that maybe 30 shots.
Is there a good quality compoundbow that is also a pro bow but that has an adjustment from 40 till 60 pounds ? So i can invest in a gokd quality bow and that i use foor years ? F.e. just as good as nxt ?
The Hoyt Carbon Matrix is a solid good bow. But i think it is not a smooth bow. In time thjs will be ok but for now i could hurt myself.
Broke 4 spines in my back.
It could be that after awhile i have to quit shooting. But at the same time shooting a bow could be good for me. While building up muscle in the back. I have a lot of muscle atrofie. Muscle that died.
Or maybe i could replace the bolt for a slights longer ones and give the arms three or four extra turns ? I am not sure that this is even safe to do. I do not care if the arrow only gets 20 meter. I would be glad that i could use up strenght and as soon as possible replace the bolts to the original ones.
I find it very btw that bows have only incrementals of ten pounds. Why not f.e. a drawweight from 40 till 60 pounds ?
I have looked at pse , hoyt , Martin. But the more pro bows only have 10 pounds adjustment. And from what i have read i think that pse has the smootest pull. So maybe a pse is the best for me.
I never have shot another bow then my Matrix. And maybe this is a very stupid question. But could it be possible that a pse ntx at 50 pounds could be easier to pull then my Matrix at 50 pounds ? Logic must say that 50 pounds is 50 pounds. Maybe you have a thought about that.
In my surroundings i do not have the possibility of a shop. So buying another bow is all on me and by what i learn from other pro people.
God bless your efforts
I honestly think you should look at the Elite Ember. They have it marketed to an audience as a mid priced bow, it is a very nice bow for the money. I did a review on one years ago and I was very impressed with it for the price. It also has a very long draw weight adjustment range. I pray for God to bless you and help your muscles heal.
@@seansoutdoors Thank you. I will look into that bow. To be true it is more the spine that is the problem. Broke it years ago on several places. Need 400 mG Oxy to get through the day. For years. A few years back stood on a ledge 30 meters above ground for a hour. But walked/stumbled away instead of the original plan. Sadly it is not possible to operate due to the complexity and very high risc. And the future is not so bright. Not for anyone. Not so much into the Biblical stuff. But due to a specific education i know that some terrible things soon will happen throughout the world. But people do not see that. Maybe that is for the best. Not sure about that to be honest. Almost every person will be fully monitored throughout every aspect of his or hers life.
In the Netherlands thjs year they will start with the European Digital Identifcation. In Sweden they start with a Carbon Footprint Monitoring system controlled by the government and the bankingsystem. Also combined with healthcare. And in Spain this year they will start with a centralised digital Euro currency. In 2024 France and Germany have to follow and in 2026 every country in Europe and by that those three systems will be combined. At the same time it will be rolled out to Canada and Australia. Also the US and the UK. In Europe they have already made deals between the bankingsystems and the larger groceries. A certain deal is about that all people have to be chipped before 2030. It is completely worked out already. Also that every major grocery has to install 400 till 450 camera's. And with that every purchase will be automatically billed on leaving the shop. But by then it is possible that your account will be blocked because of a persons max carbon footprint. A.I. can block your account or that you cannot pay anything when f.e. youre futher away from your home then 5 km'ter. It is an incredible complex system and by that there is nothing you can do.
No possibility to fight fkr any freedom. Cause they can instantly block your way to keep alive. Even much worse then the Social Crediting System in China. It is Elons goal to use Twitter for every transaction that comes along with the use of that system. He buying Twitter has nothing to do with free speech. It is just a cloak. So people will see it when it is to late.
I have read documents that getting chipped is ojt of free will but if you say no then you can not buy anything. Not even have a job.
So everyone will be forced to accept it and be chipped. The world is quickly going to be replaced into something where 99 percent of the people have to suffer. While it serves no purpose for the climate at all. Very weird things are soon to be happening. If people would see it and understand the complexity of that system they still could do something against it. But once it is operational then a potential fight is lost before it even started.
Sorry to hear about your spine. God bless you.
I want to get my first Bow . A Bear sounds good. What would be the best size?
This bow only comes in one size.
How many type of bow press did you use , and which one is better for workshop (all kind of bow)
I'd get a "Last Chance Bow Press"
@@seansoutdoors
I see but that is means is the one with wheels is is better than others types ?
If you mean the cheap portable presses as "the other types" then, yes it is better.
Did you have any problems with the draw length on this bow? I bought this bow for my girlfriend. When I went to tune it, I found that that draw length was about 1 1/4 " long. I ended up buying new strings for it because I couldn't get the draw length corrected, but I got the same results with the new strings. I did so much twisting on the canes and strings with no success. Then I have up and just accepted the draw length had to be set shorter to get the draw length I want.
No it was right on for me.
I recently watched your video comparing the 🐻 legit with the G2. I went ahead ad bought the legit special edition. Is it the process to adjust a legit ? That's for your help!
Yes
Sean, I've always heard that a boat performs it's best at its peak draw weight. A 60-70lb draw weight bow performs better at 70lbs instead of let's say 65 lbs. What do you think? Since I've gotten a lil older and bows have gotten faster, I've drop my draw weight from 70 to 60 on my bows and shot 60 lb limbs. The last CPL of Mathews bows ive had with 60 lbs actually topped out at 62 lbs.
That is what even the manufacturers say. Some bows have a much larger drop in efficiency than others. I think Prime bows were the worst in efficiency drop the year I tested for efficiency. Some bows didn’t have much if any drop.
Sean thanks for all the information! Great job! BTW - can you fix the link for the Bow Vise or list what it is please?
I updated the link. Here is a new link for it amzn.to/2Yv0qnl
If I worry about my top cam, as you said, it will be fine, but the cable touches the comb easily ... is that very bad?
Thank you for a good video about G2 Cruzer!
Your description is not clear to me. I can't picture exactly what you mean.
How I tune the timing, my bow is double yoke system the top cam move first when I released slowly and follow by bottom that's mean the bottom cam hit the cable first when I full draw
Add a twist or half twist to the cable attached to the bottom cam
Man, I shot a cruzer g2 and I realy Love that bow. Changed string and Cables and now the bottomcam is in line, but topcam not. When I tried to fix this like you explain got to turn the jokes 6 -8 full turn but now the other jokes touching the cams at right Side (lefthand bow )
Any idea what happend and how to fix this ?
Thanks man and keep goin like this ...
Make sure your cables are properly in the cable slide before you look at cam lean. That can impact how much cam lean it looks like. If your other cam is now off just add a little twist where needed to bring it back in.
Can this bow be taken apart without a press?. I know this is an old video but I've been watching almost all of your videos in the last few days and I thank you very much for all of the excellent information.
Probably. I haven't tried it and they warn to not turn the limb bolts more than 10 or 12, I can't remember the exact amount so you'll need to double check that. I'd suggest turning them the amount and see if the string or cables pop off at that amount. Some of the other brands I've worked on similar to this will come off and then you can work on the bow...
Ok thank you very much
On the cruzer g2 how many pound do I loose on one full turn out?
I don't remember off the top of my head but I'm pretty sure I tested and recorded that detail in this video ruclips.net/video/yWAzBIGIrlk/видео.html
I think you should do one on the bear vast
If I come across one I will
Nice video ,,From mizoram... :-)
Thank you from USA
I just just got my bear cruiser in the mail what weight does it come from the factory at
It should say it on the tag what weight they shipped it at..if not, I don't know, it all depends on the assembler.
Good message in verse selection. How do you select your verses?
I pray about it and see what comes to mind. Thanks.
How do you set a whisker biscuit on a edge 320
Bolt it on and I usually leave about an 1/8th inch from the back of the riser to provide clearance for adjustment left and right.
How different is tuning the G2 from the older Cruzer?
Should be same for a bow with two yoke systems
im gonna take my to a pro since this is my first bow ,,
Awesome
What's that old bow hanging to the right?
Bear whitetail II
I have one 👍🏼
Awesome. I took my first deer with mine. That video is going to air in about a week although I don't think I talked about the bow in it. It will be the 5 pointer in the antler stories series I'm about to post. God bless
Perfect bullet hole....... but you completely missed the elk. :)
Maybe that is why there is no elk meat in my freezer.
How about a white background? Did you review your video before publishing? You point to components on your bow which leads me to believe you want a visual, but your background is the same as your bow which reduces the visual aide. Why wouldn't anyone consider this?
Sorry to disappoint you
I guess that's why I'm just some guy filming himself in his basement and not a professional.
Not a disappointment. Pretty good tutorial. If you consider the visual more this would be, hands down, the most effective tutorial for bows.
👍
Obviously, this video isn’t for an archery newbie.
👍