Loving this series. For the foams, i used to work with foam and found some of the cheaper foams come quite crispy and stiff until its bed in to which it becomes what it will be for the long haul until it begins to fail, as mentioned. A quick way to break foams in, is to soak them in water, and then fully squish them out to flood and break the initial plastickyness. Don't wring them, just a flat squish/scrunch.
When I added the 2 wraps of fridge foam and compressed a little to install in the tire, the foam sticks to the layer of carpet tape on the inner stage and now they have dents where that happened. Not sure how to keep this from happening
Would you be interested in evaluating a Titan 775 conversion kit we developed? The stump-pulling-torque on 6s puts a smile on one’s face every time. The kit consists of a professionally designed motor mount and servo mount.
tim tim outer softer or firmer then fridge foam ? knuckle weights, softer outer insert, springs. front bumper looks like it can be shaved once removing the 2 fasteners cut in shape only leaving the outermost front layer, probably buzz off the hoop, cut the little tan in front of wheelwells after. Just suggestions.
@Crawler_Canyon The SPORTING KEVINATOR looking much better with the rear bumper mod, just needs the front moustachio bumper sorting out and the bed painting black and He gonna be a smart lookin dude! The Tan shell has a hint of a 70s vibe about it. Groovy Rig Sir.
Here's a dis or dat challenge fa ya......ya ready....Cut n snipped Hustlers......if ya av 2 sets, on one set cut n snip da little piece next ta da V bit, on set two, cut n snip da V bit n leave da bit next ta it......outcome da Hustler starts ta Hustle or it doesn't...
The rear bumper mod looks sooo clean. Liking the look of the black wheels / silver rings as well. Looking forward to the next episode.
The genuine excitement of the body fitment makes your videos so fun to watch.
I really enjoy your sport tuning videos on the cheap!!!
Loving this series.
For the foams, i used to work with foam and found some of the cheaper foams come quite crispy and stiff until its bed in to which it becomes what it will be for the long haul until it begins to fail, as mentioned.
A quick way to break foams in, is to soak them in water, and then fully squish them out to flood and break the initial plastickyness. Don't wring them, just a flat squish/scrunch.
Great series of videos. This is right up my alley
Use the Vanquish Origin front and rear bumpers. Very clean and tucks in nicely. $14 or $15 bucks for both
I’m giddy awaiting the Morlordy chassis as that will be the determining factor if I pick up a sport.
Hahaha that front bumper looks like a moustache!!
(Zero disrespect. You’re my favourite RUclips RC channel)
morning gents😊
I'm beginning to think this series is really about getting a heat gun 🤔 😂
Today's installment brought to you by the world's meanest hairdryers
1:03:39 call him billybobjoefrank (one name)😂
When I added the 2 wraps of fridge foam and compressed a little to install in the tire, the foam sticks to the layer of carpet tape on the inner stage and now they have dents where that happened. Not sure how to keep this from happening
Tanner
I like Tanner.
I vote for Kevin😁
Make it do the things!
Now I’d like to see the “new” brown sillicones in some canyon trails. (And stock foam in rear ;^)
Those brown ones are skinny, they fit pretty much perfectly in an Injora pin. Why aren't these silicloners making inserts for "normal" class 2s?
Inner fenders provide 4 different rear shock mounting positions?
Correct.
Injora sells a little switch so that you can turn your vehicle on and off without removing the body
Would you be interested in evaluating a Titan 775 conversion kit we developed? The stump-pulling-torque on 6s puts a smile on one’s face every time. The kit consists of a professionally designed motor mount and servo mount.
tim tim outer softer or firmer then fridge foam ? knuckle weights, softer outer insert, springs. front bumper looks like it can be shaved once removing the 2 fasteners cut in shape only leaving the outermost front layer, probably buzz off the hoop, cut the little tan in front of wheelwells after. Just suggestions.
Timtin outer definitely firmer. Probably around the same "final" firmness as a hairbun, at least on the rocks.
I put a vanquish original front bumper on my trx4 and it’s worked very well.
@Crawler_Canyon The SPORTING KEVINATOR looking much better with the rear bumper mod, just needs the front moustachio bumper sorting out and the bed painting black and He gonna be a smart lookin dude! The Tan shell has a hint of a 70s vibe about it. Groovy Rig Sir.
Oh my god Becky look at her bumper it's like so big.........
Wagwan Canyonaeros 👊
I like were I've seen people just notch the rear tail gate were the bumper post stick through so it's just a Lil tunnel looking hole
Harbor freight has a great set of larger flush cut icon brand very nice for thick plastic
Maybe a hobby knife whilst da bummer is on would be a better cut........
Howdy👊
I would like to have a new sport to put a 72’ Blazer with interior body set on it 😮
Helllo canyoneros. May your week be swift 😎😉
Vanquish origin bumpers for the cheap cheap win
Make a wood stain look !!!
That front bumper is an abomination.
I swear the one on the "new" Basecamp is even bigger.
Its sooooooooooooooooo big
The bumper makes me think its name should be phteven (steven with a ph)
😂
Just throw brass at it put Ruptures on and call it a day.
Joking
I'm looking forward to some shock & suspension adjustments....for better or worse.
@brian morrison Where is the fun in that ?
Travis !
3
Yo
Frankly, he looks like a Frank🤣
I would just remove the front bumper
Here's a dis or dat challenge fa ya......ya ready....Cut n snipped Hustlers......if ya av 2 sets, on one set cut n snip da little piece next ta da V bit, on set two, cut n snip da V bit n leave da bit next ta it......outcome da Hustler starts ta Hustle or it doesn't...