You are a master of skills you did a fantastic job with the blade and your handle designs just get better my friend thank you for your video's stay safe and well my brother thank you Brian all the best to you and your family for Xmas and New year ⭐⭐⭐⭐⭐🎄👍🍺🍺🙂🍺
Nice handle! However, I wouldn't paint it, contrast seemed to be way better before, but that's just to my eye. Also, if next time you'll need to cut a sheet of brass, clamp it flat to the table and cut horizontally, you'll feel the difference. Good luck!
I have been viewing your videos for awhile now, I am happy to see how well your English improves and I am always excited to see a new video from you. Keep up the fantastic work!
Still have my first chef knife. I've had to reshape the tip after it snapped off. And there is a small bend in the tip, even after I bent it back ☹️. But, it's straight enough to use and still sharpens nicely 😅. I love the tiny anvil! ✨️🔪✨️👍
Something you'll want to watch out for. The sawdust in the epoxy trick is great if you're trying to blend epoxy to look like wood, but it also weakens the grip the epoxy has on the tang of your knife. Just don't want you to hurt yourself if the epoxy breaks down on you since you don't have any mechanical connection there. :)
Love what you are doing, but im a bit confused that you left the shape of the blade like that. the heel of the blade is swooping down, after the knife has been sharpened for many years, thus making the heel a high point and making the blade unable to have contact along the chopping board. In my opinion that makes the knife almost unusable. A concave curve will never be of use for kitchen knives, and for sure not the shape this blad was born with. Just a little hint. Great movie and great projects. keep it up
Wow you’re very clever using that water tank as like a holder for the rust remover and the knife idk if that was the first time this was done because this is my first time here but it seemed rlly smart to do
2021: makes knife with limited skill and few toold, leaves in sea for a month, leaves on a fleamarket stall in Eastern Europe... 2022:...waits... 2023:...waits... 2024:...waits... 2025: one of the countless excellent restiration channels buys rusty, badly made knife and fix it up. Result far better than my limited knifemaking skill allows, value x5.
Hello sir, thank you for attention. Due to when I make mounted installation of handle I always used a sawdust it's good glues everything inside. For example, take the glue for wood and mix with sawdust, when dry you will see how strong it has become
@@ScrewsAndTools Eh, metal blades will cut wood just fine, but they won't give you the cut you're looking for. The cuts were uneven because I think your fence might have moved. You should check that out first. Then try a different blade.
Your English keeps improving. Gotta pick on ya a bit.. the part of the blade near the handle looks a bit off to me. Your profile isn't quite right, it's a bit too wide right at the end of the blade where it mees the handle on the edge side. Anyway, that's how it looks in the vid. Not by a lot, but just enough to spoil the look for me.
You are a master of skills you did a fantastic job with the blade and your handle designs just get better my friend thank you for your video's stay safe and well my brother thank you Brian all the best to you and your family for Xmas and New year ⭐⭐⭐⭐⭐🎄👍🍺🍺🙂🍺
Thank you so much Brian! ^_^
This guy is the wizard of the handles.
THE HALLOWEEN ENDS KNIFE LOL
Nice handle! However, I wouldn't paint it, contrast seemed to be way better before, but that's just to my eye. Also, if next time you'll need to cut a sheet of brass, clamp it flat to the table and cut horizontally, you'll feel the difference. Good luck!
I love it, especially the hammered copper. Great job!
I have been viewing your videos for awhile now, I am happy to see how well your English improves and I am always excited to see a new video from you. Keep up the fantastic work!
Thank you very much sir! I really appreciate your attention!
Симпатичная рукоять получилась!
Nice work my friend, blade and handel looking good, thanks for the videos, keep up and stay save.
Thank you so much!
cool!
I made the handle of deer horn :)
nice job there👍👍
Nice job Guy,,,,,,,,You have an excelent way to restoring old tools,,,,,congratulations,,,,,, greating from Perú 🇵🇪👍,,,,,,,
Thank you!!
You Are getting too good at this, I am just in awe
Great Job! Great Addition to any Kitchen Knife Set!
Thank you sir. Yes, exactly.
great restoration,love the handle,hugs to you and a Merry Christmas,
THAT is a beautiful blade.
Still have my first chef knife. I've had to reshape the tip after it snapped off. And there is a small bend in the tip, even after I bent it back ☹️. But, it's straight enough to use and still sharpens nicely 😅. I love the tiny anvil! ✨️🔪✨️👍
Great work! Very sharp knife. You're getting better and better! Keep going Screws and tools 👍❤🔪⚒
⚒🔨 amazing restoration! I like test in the end of video.
Awesome 👍👍👍Thanks for sharing
It looks damn good! Very good job!
Excelente trabalho! Like👍
Perfect!
Hi bro 👋👋👋 good restoration 👍👍👍 the perfect knife 🔪 👌🏽
Very nice knife!
Thank you sir.
Nice one glad you kept the blade dark. Merry Christmas brother
Thanks, you too sir! ^_^
You talented man!!! ❤️
Awesome
Hi! You are real master , I do not know where from you are get all this rusty stuff but you do great items from it!!!Respect!
Thank you!!
Good skillz!!!
What a lovely Butcher knife 😁 🎁Merry Christmas bro 🎄
Merry Christmas!
Love it when you take garbage and turn it into something useful that looks good.
Thank you! Glad to hear ^_^
Feliz Navidad 🎄
Craftsman!!
Merry X-mas bro to you and your family
wow perfectly done, what time it takes you to make restoration?
Hello thank you for attention. For example, this knife restoration took me a 5 days.
Something you'll want to watch out for. The sawdust in the epoxy trick is great if you're trying to blend epoxy to look like wood, but it also weakens the grip the epoxy has on the tang of your knife. Just don't want you to hurt yourself if the epoxy breaks down on you since you don't have any mechanical connection there. :)
Thanks for the advice, sir. I always try to learn and am always happy to listen to experienced people.
При работе за сверлильным станком (да и с любыми вращающимся элементами машин) работай без перчаток и закатав рукава))
А что за пылесос? Чайка?
Ok, raketa name.
Love what you are doing, but im a bit confused that you left the shape of the blade like that. the heel of the blade is swooping down, after the knife has been sharpened for many years, thus making the heel a high point and making the blade unable to have contact along the chopping board. In my opinion that makes the knife almost unusable. A concave curve will never be of use for kitchen knives, and for sure not the shape this blad was born with. Just a little hint. Great movie and great projects. keep it up
Hello sir, thank you for attention and advice. I will consider it next time. Merry Christmas! Regards.
Great work as always but handle looks a bit thick
Why do you add that dust to your epoxy? Does it make it stick better?
Yes sir, in that case I always use sawdust. For example, if you take a wood glue plus sawdust, you can see what a strong mixture is obtained.
Wow you’re very clever using that water tank as like a holder for the rust remover and the knife idk if that was the first time this was done because this is my first time here but it seemed rlly smart to do
Incredible
very nice =) enjoy your salad =)
^_^
anh có thể cắt bớt những công đoạn thừa không
2021: makes knife with limited skill and few toold, leaves in sea for a month, leaves on a fleamarket stall in Eastern Europe...
2022:...waits...
2023:...waits...
2024:...waits...
2025: one of the countless excellent restiration channels buys rusty, badly made knife and fix it up.
Result far better than my limited knifemaking skill allows, value x5.
You know, I have a couple of techniques that can really clean up a wooden work bench
У МЕНЯ ДОМА ТАКОЙ ЖЕ ЛЕЖИТ ВСЁ РУКИ НЕ ДОХОДЯТ ВОСТАНОВИТЬ.
хорошая фактура, но ручка явно не от этого ножа, к сожалению... а лезвие клинка стоило бы, на мой взгляд спрямить, для удобства пользования
Why does he put sawdust in the glue/handle adhesive
Hello sir, thank you for attention. Due to when I make mounted installation of handle I always used a sawdust it's good glues everything inside. For example, take the glue for wood and mix with sawdust, when dry you will see how strong it has become
You should try to use a smaller blade on your saw, it might cut better
For example for metals?
@@ScrewsAndTools Eh, metal blades will cut wood just fine, but they won't give you the cut you're looking for. The cuts were uneven because I think your fence might have moved. You should check that out first. Then try a different blade.
I try to configure it few times but in any way I can't get nice cutting line. Thanks for attention.
Is the blade dull, maybe try putting on a new one.🤷
C * C* C* C* C * C* C* C* C* C*
❤ ❤ ❤ ❤ ❤ ❤ ❤ ❤ ❤ ❤ ❤
End of handle looks slightly unfinished, otherwise great job.
anh có thể nói tiếng việt nam không
This is a cutlery, and as such, should be mirror polished.
It is his knife. It can be any color he wants.
i think that is hair paint!
Yes sir, it's hair paint.
Your English keeps improving. Gotta pick on ya a bit.. the part of the blade near the handle looks a bit off to me. Your profile isn't quite right, it's a bit too wide right at the end of the blade where it mees the handle on the edge side. Anyway, that's how it looks in the vid. Not by a lot, but just enough to spoil the look for me.
Thank you!
Зачем?
Moin
Весчь
Топорная работа.
I understand the desire to monetize these videos but there are way too many pop up ads that just ruin the viewing experience.
You’re not supposed to talk at all follow the damn rules