Yeah Man, I'm diggin the HARBRO FREIGHT Jan sales flyer! I wish I could get myself to a HARBRO FREIGHT store that's nearer my hood n spot (45 min w/an all traffic drive). However, a lil drive time irratiation makes my time roaming them aisles that much better (great for relaxing-no nagging kids or partner, no whiny friend; just me and my HARBRO FREIGHT store). I sincerely say, BIG THANKS and much RESPECT for taking time to make this vdo and sharing. This really looks to be a gr8 sales event and if I hadn't seen it in my YT feed, I wouldve totally missed it (and probably end up spending a whole lot more at one of those two big box HW stores where your voice echos back as you cry out for some help). Keep these notices coming and I'll stay sub'd. Till next vid I wish you peace n good vibez ✌😎.
the Diamondback tile saw is a beast. remodeled my entire house and did all tile on the first floor.. it cut 100s of 30x30" porcelain tiles without issue
12/3 means 12 gauge 3 wires black, white, and green. the green is for the ground, black is hot, white is neutral, it also would be 14/3, which means 14 gauge wire with 3 wires etc just 14 smaller diameter wires; 12 gauge is better for bigger loads or longer distances
Like you went and they didn't let youu? My experience has been that most harbor freight employees are pretty generous. If you have a few different stores in the area, normally one gives in. But sorry to hear 🙏💪
I was able to stack the $25 off when I bought the ICON offset wrenches that were on ITC member special. Got both metric and SAE sets for $75 total, normally $69.99 EACH. Cashier told me no exclusions on the discount no matter what the fine print says.
Wasn't anything hardly in the clearance/as is section at my closest store today, the table will probably be gone as soon as that deal starts....too bad they didn't have that deal a couple weeks ago because they had several larger generators in the as-is section. The little stuff they have now ain't worth the trip to begin with. For the cost of those stupid battery powered, power stations, I'd rather spend the money on a generator. Most of that clearance stuff was gone months ago, and most of that stuff has been on clearance for quite a while anyhow, so its mostly gone already.
do you know when the rest of the power stations are being released? or at least when they say early 2025 what that usually means?? i am on the fence if going with one of theirs or a jakery and want to consider the predator one
You are right. All the news release says is early 2025. Hopefully the latest March. 💪🙏 The deals make the ecoglow and jackery super enticing. It seems tough to pass up of not sold out.
@@dailythriftanddeals thank you for the response, i like the 5 year warranty on the new units as i will be putting heavy use on these batteries so i might wait
@@BrownCoatFan basically yes .... but....the prong being present, on the ends, does not change the industry notation, 14/3 means 14 gauge, 3 conductor. Look at bulk wire labeling.
@@JonBoehmExtension cords don’t use the same naming system as nm-b, mc, etc. Most wires are labeled as gauge/conductor count (what you are talking about, excluding ground), while extension cords are labeled as gauge/# of wires (including ground).
I don't mean to be "that guy", but your math is wrong. You multiplied $2500 by 0.4 and got $1000. That's not how you do it. You would multiply $2500 x 0.6, because you're taking .4 off of 1.0. The correct price would be $1500. Thanks for the leak.
@ while you are technically correct (the best kind of correct), it's confusing to most people. It's easier to just do it the way I mentioned, that way you instantly know the discounted price (before any taxes or fees or any additional costs)
Yeah Man, I'm diggin the HARBRO FREIGHT Jan sales flyer! I wish I could get myself to a HARBRO FREIGHT store that's nearer my hood n spot (45 min w/an all traffic drive). However, a lil drive time irratiation makes my time roaming them aisles that much better (great for relaxing-no nagging kids or partner, no whiny friend; just me and my HARBRO FREIGHT store). I sincerely say, BIG THANKS and much RESPECT for taking time to make this vdo and sharing. This really looks to be a gr8 sales event and if I hadn't seen it in my YT feed, I wouldve totally missed it (and probably end up spending a whole lot more at one of those two big box HW stores where your voice echos back as you cry out for some help). Keep these notices coming and I'll stay sub'd. Till next vid I wish you peace n good vibez ✌😎.
Thank you for watching! I appreciate the kind words! 🙏🙏💪💪
40% off as is and clearance items. That’s the real deal, get there early.
Agreed!! 💪🙏
14/3 gauge is a 14 gauge wire times 3 wires so light duty with ground. 12/3 is medium duty. higher the gauge nuber smaller the wire
Thank you for the info and for watching! Invaluable 🙏💪
I got the two year membership two weeks ago. $45. You cannot get it online. You have to get it in store.
SAME!
the Diamondback tile saw is a beast.
remodeled my entire house and did all tile on the first floor.. it cut 100s of 30x30" porcelain tiles without issue
Great deal, but there’s hardly ever anything on local store’s clearance shelf…..
I see a couple things but it's obvious why they're on clearance, SAE sets, very obscure Icon sets, etc
Same here....
2 year ITC membership only available in store at checkout.
1 year available online or in store.
Thank you for confirming! Is the 2 year a better value?? 🙏🙏💪💪
@dailythriftanddeals
Last yr I believe I paid $45 for 2yr, so buy one year, get 2nd year half off 👍
Love Harbor Freight! If it wasnt 30 min away Ide be in everyday.
Same lol 😆 good luck out there!
Think of how much money ya save by it being half hr away.
$100 off table saw is 💪
Minecraft fan here. Not picking up the creeper but prolly those 2.5 amp hour hercules battery when that clearance deal hits.
Yes! I'm glad it wasn't lost on everyone 😅 excellent! Good luck out there! 🙏💪
The haulmaster 18in step stool is absolutely worth it. I use it anytime im working under the hood of my truck.
I'm definitely going to check it out. Thanks! 🙏💪
I picked up the 3 ton jackstands, 2 pair out the door for $65
I got 4 jackstands 3 ton for $70 recently still good imo
@ 2 pair is 4
@@BackyardEngineer334my point was you found a better deal but thats alright
@@ytwatcher2021 lol my bad
HarBro Freight. Like the new name 🤣
Thank you! 😅🙏🙏💪💪
12/3 means 12 gauge 3 wires black, white, and green. the green is for the ground, black is hot, white is neutral,
it also would be 14/3, which means 14 gauge wire with 3 wires etc just 14 smaller diameter wires;
12 gauge is better for bigger loads or longer distances
Thank you for the info. I appreciate you! 🙏 💪
Wish it was the 3 ton instead of the 2 ton jack but still a good idea to grab one!
Yeah. 2 ton should cover most situations 💪🙏
You can't stack those coupons here in AZ, for those ones this weekend. Over $50 or over $100 ☹
Like you went and they didn't let youu? My experience has been that most harbor freight employees are pretty generous. If you have a few different stores in the area, normally one gives in. But sorry to hear 🙏💪
The coupon for this weekend is the same coupon code so you get one or the other if you spend 100 get the $25 off
I was able to stack the $25 off when I bought the ICON offset wrenches that were on ITC member special. Got both metric and SAE sets for $75 total, normally $69.99 EACH. Cashier told me no exclusions on the discount no matter what the fine print says.
Dude, that Extension Cord is 14gauge with 3 Conductors!
Great video. Thanks for sharing
Thanks for watching 💪🙏
Wasn't anything hardly in the clearance/as is section at my closest store today, the table will probably be gone as soon as that deal starts....too bad they didn't have that deal a couple weeks ago because they had several larger generators in the as-is section. The little stuff they have now ain't worth the trip to begin with.
For the cost of those stupid battery powered, power stations, I'd rather spend the money on a generator.
Most of that clearance stuff was gone months ago, and most of that stuff has been on clearance for quite a while anyhow, so its mostly gone already.
It took me longer than it should’ve to get the creeper reference.
Lol I'm glad someone got it 😅🙏💪
do you know when the rest of the power stations are being released? or at least when they say early 2025 what that usually means?? i am on the fence if going with one of theirs or a jakery and want to consider the predator one
You are right. All the news release says is early 2025. Hopefully the latest March. 💪🙏 The deals make the ecoglow and jackery super enticing. It seems tough to pass up of not sold out.
@@dailythriftanddeals thank you for the response, i like the 5 year warranty on the new units as i will be putting heavy use on these batteries so i might wait
Went today and picked up 3 2.5AH Hercules tool batteries for $15 each ! SCORE.....Bobby Orr !!!
Steal of the day! Good get! 🙏💪
On extension cords, 14/3 means 14 gauge, 3 prong. 12/3 means 12 gauge, 3 prong.
3 conductor
@@JonBoehm tomato tomato😀
@@BrownCoatFan basically yes .... but....the prong being present, on the ends, does not change the industry notation, 14/3 means 14 gauge, 3 conductor. Look at bulk wire labeling.
@@JonBoehm yes, prong is just a colloquial expression. You're correct.
@@JonBoehmExtension cords don’t use the same naming system as nm-b, mc, etc. Most wires are labeled as gauge/conductor count (what you are talking about, excluding ground), while extension cords are labeled as gauge/# of wires (including ground).
What is the best price you’ve seen on the icon chair?
Lowest I've seen was $65
@ Wow what time of the year was that? Black Friday
Black Friday it got down to $69. And during the summer it was at $65
Oh dang I didnt know you lived in Riverside county
The Harbor Freight Capital of the world 🌎 💪🙏
Here to say that your Minecraft reference didn't go in vain.
This makes it worth it 😅💪🙏🙏
Harbro Freight. HAHAHAHA
Thanks for watching! 😅🙏💪
I don't mean to be "that guy", but your math is wrong. You multiplied $2500 by 0.4 and got $1000. That's not how you do it. You would multiply $2500 x 0.6, because you're taking .4 off of 1.0. The correct price would be $1500. Thanks for the leak.
Math is hard 😅 Thanks for watching! 🙏💪
well yeah but you're still saving $1000, which is what he said on the video. he didn't say the new price is $1000, he said you would SAVE $1000
@ while you are technically correct (the best kind of correct), it's confusing to most people. It's easier to just do it the way I mentioned, that way you instantly know the discounted price (before any taxes or fees or any additional costs)
Thats how I do it but ya if you don't get it obviously the 40% off is off so you take that from the total
He did say it was 1000 off and would be 1500
Your video is to fuzzy to watch ! :(
I'll try and do 4k... you're the first to request more clarity. I will try in my next video 🙏💪 thanks for trying to watch though! 😭
Harbro Freight lol
😅🙏🙏💪💪