Metal Saw Maintenance And Rebuild A Lithium Battery For It - DeWalt DW934
HTML-код
- Опубликовано: 16 ноя 2021
- In this video, I disassemble the saw, make all the parts clean, Replace 18650 batteries and BMS For DeWalt DCB200 18V Li-ion Battery Pack.
Хобби
![*SUPER RARE* THE PARADIGM IS BACK?!?!? Fortnite Item Shop [August 6th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/ru6xSH1RaPw/mqdefault.jpg)
*Works great **MyBest.Tools** , expanding my existing 20 volt Dewalt range. Ideal for ripping through 2 x 4 lumber or smaller.*
With the motor not being brushless you sure can tell the battery consumption difference. Excellent work as always.
I think my favourite part of the video is the battery pack rebuilds I don’t know why it’s just very satisfying
Hi. Good job, but you mounted the springs for the carbon brushes backwards. And the last disk you installed was also backwards.
Sorry.
Nice pull down and clean up 👍 I love watching you rebuild these battery packs.
Great job. Enjoyed watching.
This was an exact replacement for the old one that lasted about 10 years. ruclips.net/user/postUgkx7yWIKcrbA9KMHkGSfcgxW2lsjHT6B8Sh The top of my mitigation tube by my roofline was just a 90 elbow which allowed too much debris to fall down into the fan, eventually ruining it. Without this issue, I bet it would have kept running another 10 years. When I replaced this fan, I added an extra elbow joint so the top tube now it does a 180, which should solve that problem. The radon guys around here wanted to charge me a $300 diagnostic fee, then parts/labor (probably close to $600 total). I installed this all by myself in about an hour for the cost of the fan; it would probably be even easier/faster with two people. FYI the manufacturer's warranty greatly differs depending on whether you install it yourself (1 yr warranty) or have a licensed installer do it (10 yrs).
Very important tool. Congratulations for the care about it 👏
Perfect for small projects. Not got a lot of power so if the wood starts to flex it stops the saw pretty easy. Use it for small tasks and you will be happy. Safety system Works great ruclips.net/user/postUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c .lose your grip on the saw it shuts off and the sheath closes over exposed saw.
Safety precautions when you installing the circular blade you must remove first the battery pack!
Hilarious ! People here telling this man how to do this and that and that’s not safe blah blah blah …stfu this guy obviously knows what he’s doing. Been watching him restore all kinds of tools electronics appliances etc for awhile now.
Great job, thank you brother. You are so talented
Excellent work 👍👍👍 . Thanks for sharing
Nice piece of work! You have obviously done this once or twice.
What a great video very nice work well done
Good hands, nice work.
this makes me wanna go too a fleemarket for some reason. (what a talent btw. great work)
Boa tarde!adoro seu trabalho.
Gostaria de dar uma sugestão, sempre que desmontar uma máquina elétrica comece primeiro tirando as escovas.
Grande abraço
Bro you doing amazing Wark 🥰🥰
Bel restauro 👍
Nice Job.
Fantástico 👏👏👌🇧🇷
Very nice video brother 👍
Did you ever saw a video how does this circular saw kick back when they get stuck into the material? You should!
Good job
Excellent restoration my friend, I think you need a more powerful motor maybe brushless for cutting metal, that saw is perfect for wood though!
you make this look almost easy...almost.
super tare
Nice 👍🏻👍🏻 🇮🇳 || Kuki
Круто!!!
For safety, the battery should be removed before installing or removing the saw blade
Yeah, i noticed that as well
Oh Jesus 🥱🥱🥱 ur one of those?
i love that you use Makita to repair Dewalt... up the Makita crew lol
💯👌
The carbon brushes springs were mounted upside down.
👌👏👏
👍
What are you using to clean plastic in minute 5?
Quite the talent. Does anyone know where he's from?
Я надеюсь! в переходнике аккумулятора с никель на литий установлена плата защиты от переразряда и короткого замыкания, иначе жалко новые банки лития
New battery PCB has no heat sink 😸, similar to the the OEM you buy from eBay or Amazon.
show👏👏👏👏👏
A única coisa que ele errou foi o jeito que ele botou a mola que faz força nas escovinhas
Why it wasn't repainted even if it's internal parts??
это как нужно не любить свой инструмент, что бы он вот так выглядел? или специально для видео готовил?
How economical is it to rebuild these batteries doesn't look complicated but im curious on the cost
We asked a guy locally in Bismarck North Dakota how much to rebuild them and it was more than a brand new one from the manufacturer but usually don’t quote me on this but the whole battery isn’t dead it’s usually only one cell
Likeeeee
Como se llama el circuito pcb de la bateria ?
How much do u charge for this
Where did you get them boards for battery pack?
This is bms or security
19:19 That disc is mounted in the wrong direction ..! The Teeth should tear first the material not the back ...Teeth always forward in rotation sense...👍🌟
Can you write the name of the liquids you use?
👍🇪🇨
Not a criticism, but I have inherited a dewault drill with a dead Nimh battery and looking at replacement.The lithium ion addaptor is around £100 then new lithium batteries around £20,then the cost of the circuit board. You can get new non branded nimh batteries for £20 and use the original charger.Why would you bother changing it to lithium at those costs?
Tut tut tut
🤔
A wise person once said...
"Before we get started I'd like to take a moment to talk about shop safety. Be sure to read, understand and follow all the safety rules that come with your power tools. Knowing how to use your power tools PROPERLY will greatly reduce the risk of personal injury."
Never assemble/disassemble your power tool while plugged in or when battery is installed.
Perigoso não removeu a bateria ao trocar á lâmina
you chose the wrong blade to cut the iron
The blades are on the wrong way
Robisz lepiej od większości chińczyków ale mógłbyś być dokładniejszy. Np podstawy wcale nie ruszyłeś. Masz potencjał to widać ale postaraj się bardziej. Zerknij jak robi np my mechsnics
You put the disc in the wrong way! 🤷🏽
It is installed correctly
The square faced chisels on a circular saw blade must face the direction of spin, not away from it
Your demonstration on how well your tool works good but incorrect for the type of DeWalt tool you repaired it is for cutting metal. Just saying
С электроникой (плата BMS) конечно варвар, а в остальном норм.
only washing and thats all... phatetic
Vaya mierda de restauración si lo único que ha hecho a sido limpiarlo y cambiarle un rodamiento xd
.
Where is the funny video speed up and down
Would never dream of using some crap blade from China. I worked as a tool grinder for over 10 years. We sharpened mostly saws and never saw a Chinese made one. Disgraceful. 😆
What cleaner is he using for the parts? Bar keeper's friend or equivalent?