i find it amazing the lengths some will go to in restoration and repair videos. if anything, i personally would like a narration/explanation as in parts that were repaired vs replaced. but i understand that not only adds time to production but can take away from viewership. but i will ALWAYS appreciate someone who take the time needed to do the job right.
Really ?!?! He disassembles the Sawzall, cleans it, greases it and then reassembles it. And it works. Not once did he check the motor, oil it or have anything to do with. Amazing, simply amazing.
I think this might be my old Sawzall. I had this exact model and I sold it 2 years ago when I sold it it had both pink white and green spray paint on it as shown. I wonder if this is where it ended up.
My Milwaukee M18 CSX only runs for a second or two and shuts itself down. After that, the LED turns on and off 6 times with small pauses? Also, when I press the switch sometimes the diode just lights up 4 times with a short pause and the saw doesn't work?
You were doing solid work until you dropped the carb cleaner on the plastic. Carb cleaner will deteriorate plastic and make it brittle. Use a light brush of mineral spirits or brush thoroughly with rubbing alcohol.
Bro what's the difference? Half ofthese restoration vids are just clean and polish jobs anyway. A repair only makes the video more satisfying nd genuine
Хобби
I'm a brushless boy but I'll always have a special place in my heart reserved for that "old-school sparky cool." Great restoration bro!!
i find it amazing the lengths some will go to in restoration and repair videos. if anything, i personally would like a narration/explanation as in parts that were repaired vs replaced. but i understand that not only adds time to production but can take away from viewership. but i will ALWAYS appreciate someone who take the time needed to do the job right.
*_This was excellent. You really went all out. Love the result._*
Very good job ، and good like .
Wonderful! I liked it very much!
I love seeing previously restored tools being used to restore a mew project
Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦
Really ?!?! He disassembles the Sawzall, cleans it, greases it and then reassembles it. And it works. Not once did he check the motor, oil it or have anything to do with. Amazing, simply amazing.
maybe it was working before he disassembles it?🤷♂️
@@david.1533, then why didn't he show that ? 🤷
@@whocares0692 eeeeeaawwa
Hi àq
@@whocares0692
Aa
I think this might be my old Sawzall. I had this exact model and I sold it 2 years ago when I sold it it had both pink white and green spray paint on it as shown. I wonder if this is where it ended up.
Nice work. I'd rather see things restored to a good working condition than to a mirrored finish better than new museum piece. 👍👍
Лучший спасибо за потраченное время!!!
oto trabajo bien hecho. gracias por publicar👍
You, my friend . Is a genius 👏
Makes me want to take mine apart and reassemble it😂😂
Truly skilled 👊🏼
Enjoyed the video. Note: way too much Loctite
Lol thought the same. I saw it was the RED Loctite too and thought WOOF! Just throw the thing in the trash if it breaks again.
Well done.👍
My Milwaukee M18 CSX only runs for a second or two and shuts itself down. After that, the LED turns on and off 6 times with small pauses? Also, when I press the switch sometimes the diode just lights up 4 times with a short pause and the saw doesn't work?
Good Work 👍
cảm ơn . quả thực ý nghĩa với tôi, 1 like cho bạn 😊😍🥰
Good job 👍👍😎
I have myself. Ironic how u used a Makita drill to undo the screws 😂 Awesome video keep it up man
Best work
That drill looks like a dewalt but performs like a Bauer 😂
It’s perfect
How do you know what order everything goes back in? That’s always what I wondered when taking things apart
They probably play back the video they are taking.
Take picture’s😉
Manual
Just wing it lol.
If you put it back together wrong, it'll usually let you know on first power-up lmao
You were doing solid work until you dropped the carb cleaner on the plastic. Carb cleaner will deteriorate plastic and make it brittle. Use a light brush of mineral spirits or brush thoroughly with rubbing alcohol.
🔥👍
👍👍😘😘
😎😎😎👍👍👍
🥰🥰🥰
A hot strong alum solution will dissolve steel screws in an aluminium casting
a substance that can consume steel but leave aluminum untouched?
Gonna look into this.
some ppl shouldnt own nice tools
Just mad that we can afford the newest versions every year cause we actually use our tools for work
Where do you live?
Hi
Very old my ass, still available in stores...
🎉🔥💪🚀👍💯⭐💫❤️🔥
This is more like a repair than restoration, but good job otherwise! 👍
when your putting the back piece on with the 2 brushes, there is a positive and negative, which one goes where?
1st
2
This caption should be "Repair and Cleaning: not a restoration video".
Bro what's the difference?
Half ofthese restoration vids are just clean and polish jobs anyway. A repair only makes the video more satisfying nd genuine
BFD
He is a Chinese...
Wow really. A newer tool has to be restored. Damn republicans and China. Btw love the mikita working on the Milwaukee
چون رنگ نزدی خوب نشد
"very old"... hah.
bro really doesnt know how to use an impact🤣
I absolutely hate this
you are repairing it, why use less, it will break again, it will be tired for a new one in 5 months.
Пчелкой быстрее было бы.