How do you get to the advanced settings that are greyed out to change the HDMI CEC settings so ya can use a different remote like a Roku remote or something like that? Thank you. Oh my Element is an older basic 32" flat screen. It's not a smart TV or anything.
Make sure that the element remote is pointed at the device, then press and hold the TV button on the remote until all four mode buttons light up. Enter the three digit remote control code.
It could be a manufacturer defect. Sometimes it happens. This is 1 of the reasons why manufacturing companies have a warranty option on their products.
OK, If it has a IR code database built in and the DVD player codes are in that database then it should work. The manual for the TV will have a list of preprogrammed codes and instructions on how to enter the code on the remote. It varies depending on the type of Element remote and DVD player.
I was looking for a way to scroll down on the info that the network provides. I get like 4 lines then it cuts off. I haven't a clue how to retrieve the rest of the information. Anybody have an inkling of how to do this?
If it's ur cable, try resetting it via unplugging it n replugging it in or rescanning it. If TV, try looking through ur menu. Worst case scenario, if it's not working, either ur cables or TV don't work, contact ur TV provider (I.e. DISH TV, Service Electric, etc or Element TV (manufacturer of the TV)) depending on which one is messed up.
Turn on your TV. On the remote control, press TV once. Then press and hold Setup until the key blinks twice, then release Setup.Enter 9 - 9 - 1. The TV key will blink twice.Press and release the digit 1. The TVKey will blink twice.Note: Substitute 1 with 0 if searching for a Cable code, 2 if searching for a DVD, VCR or PVR and 3 if searching for an Audio device.Press Power and aim the remote control at the TV and press CH + one or more times until the TV turns off.Note: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.Press Setup once to lock in the code. The TV key will blink twice.To search for the codes of another device, repeat steps 1 to 5, but substitute the AUX key for the auxiliary device you are searching for.
Sorry my video didn't have the info you needed. I do appreciate the kind words. This video was intended to help those with what I knew of the Element TV. That was the intent of the video.
Try resetting it to factory default. The option to do this should be available through the general or settings menus on your tv. remote control. If the section you are trying to enter has a code on it try 0000.
If you have the same type of Element TV as i did in the video, there's buttons on the bottom right side of the TV screen with words describing which button is and just hit the menu button to exit the menu screen. Hope this helps. Let me know if you still need assistance
my idiot ex who yes i live with.. bought a new replacement Element remote..same as old for the Element tv...i get back in town and wth it doesn't work and he threw out any paperwork that came with it. sigh i can't find easy to grasp info on how to get it to work...there isn't even a tv button etc ... im guessing it needs a dang code. anyone with help it would be appreciated. "eyeroll" we r raising autistic gson and it is helpful to have a working remote. everything i find is to make a element remote work on a samsung..lol!
The best I can give is a link to Element T.V. support website: www.elementelectronics.com/support/ Sorry for the inconvenience. Don't know everything about Element TVs. Shared only what I knew
Tony Z the remote I've shown in this video has a "Source" button which contains "TV" (cable wire), "Component/AV" (Red wire, Yellow wire and White wire), "HDMI (1-3)" (HD port Wires for DVD/Blu-Ray players, Video game consoles) "VGA" (For VHS players) and "USB" (Cellphone, Tablets). These are the sources for which are on the remote control. The setup is on the back of the TV. I hope this helps you out. If you still have questions, don't hesitate to ask me
Good job man super proud of ya first like also🤩
Thanks
How do you get to the advanced settings that are greyed out to change the HDMI CEC settings so ya can use a different remote like a Roku remote or something like that? Thank you. Oh my Element is an older basic 32" flat screen. It's not a smart TV or anything.
How do I turn on closed caption because it ist highlighted for access...
I want to watch or download movies or a stick to watch movies on my element tv, how can I??
Do you still have this?
Glad ya updated it bro
Thanks, the original one was too short. 30 seconds long.
How do u turn off subtitles
how do you connect the element remote to the element tv. I put the batteries in and the remote doesn't work.
Make sure that the element remote is pointed at the device, then press and hold the TV button on the remote until all four mode buttons light up. Enter the three digit remote control code.
ODST Banjo doesn’t work
ODST Banjo just got my element remote and element tv and the remote wont work
It could be a manufacturer defect. Sometimes it happens. This is 1 of the reasons why manufacturing companies have a warranty option on their products.
3duardo TV iam having same issue can't seem change my cable I have but every thing else seems to work
This is informative and will help someone with an Element TV.
I'll be delighted for those who learn from this. Thanks for coming on and watching
Does the remote light in the dark
The Remote I've shown in this video can't glow in the Dark
How do you Program this remote to a DVD player? I have an old magnavox DVD player I don’t have a remote for it. All I have is the element remote.
OK, If it has a IR code database built in and the DVD player codes are in that database then it should work.
The manual for the TV will have a list of preprogrammed codes and instructions on how to enter the code on the remote. It varies depending on the type of Element remote and DVD player.
How do I set up a RCA universal remote since I lost my original remote.
Sorry, wish I could help you but I never had that remote before. I do apologize for the inconvenience.
Yeah that’s what I neeed to know too
I lost my remote and got a new but it won’t connect how do I fix that
can we watch youtube on this kind of tv cause i have it and wanna watch yt on it.
Do u k ow how to record in a elment tv
how you connect a PS3 to Element TV and it will show up on the TV
Bro my tv went from good quality to DVI which look BAD. How do I fix it?
I was looking for a way to scroll down on the info that the network provides. I get like 4 lines then it cuts off. I haven't a clue how to retrieve the rest of the information. Anybody have an inkling of how to do this?
Are you television does RUclips have?
Q saber en español que puedo aser
Thanks
You're welcome
That great 👍 good 😌
My channels are messed up is it my cable or the tv and if it is help
If it's ur cable, try resetting it via unplugging it n replugging it in or rescanning it. If TV, try looking through ur menu. Worst case scenario, if it's not working, either ur cables or TV don't work, contact ur TV provider (I.e. DISH TV, Service Electric, etc or Element TV (manufacturer of the TV)) depending on which one is messed up.
How do I program my element remote to use on my xfinity cable?
Turn on your TV.
On the remote control, press TV once. Then press and hold Setup until the key blinks twice, then release Setup.Enter 9 - 9 - 1. The TV key will blink twice.Press and release the digit 1. The TVKey will blink twice.Note: Substitute 1 with 0 if searching for a Cable code, 2 if searching for a DVD, VCR or PVR and 3 if searching for an Audio device.Press Power and aim the remote control at the TV and press CH + one or more times until the TV turns off.Note: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.Press Setup once to lock in the code. The TV key will blink twice.To search for the codes of another device, repeat steps 1 to 5, but substitute the AUX key for the auxiliary device you are searching for.
If this doesn't work, ask your provider to help. This is the least I can do
ODST Banjo I don’t see the tv button on the remote
@@LoveBweezy sorry for the inconvenience. All I can say is to check the manual.
I'm honestly tried my best. My apologies
Well done 😉🕊
Why I can't watch my movies from usb? Stucked on photo section can't find video section? Help me pls pls pls
Try hitting the menu button to return to the main menu to select video options.
ODST Banjo its not working
I’m stuck in USB mode help
This is not what I was looking for but good job buddy you will help somebody what this information
Sorry my video didn't have the info you needed. I do appreciate the kind words. This video was intended to help those with what I knew of the Element TV. That was the intent of the video.
@@ODSTBanjo no man you are good you did a great job buddy
No media Device taken off
Why is there a lock in the menu and how do you unlock it
Try resetting it to factory default. The option to do this should be available through the general or settings menus on your tv. remote control. If the section you are trying to enter has a code on it try 0000.
I lost my remote and its stuck like that how do I fix it?
If you have the same type of Element TV as i did in the video, there's buttons on the bottom right side of the TV screen with words describing which button is and just hit the menu button to exit the menu screen. Hope this helps. Let me know if you still need assistance
@@ODSTBanjo how do u select without a remote. Im trying to scan for channels but can't select it to start the scan.
How do i program the remote to my spectrum cable box
can you tell where sent email to element cdo complants
Here's their support website for more info:
www.elementelectronics.com/support/
#notificationsquad
my idiot ex who yes i live with.. bought a new replacement Element remote..same as old for the Element tv...i get back in town and wth it doesn't work and he threw out any paperwork that came with it. sigh i can't find easy to grasp info on how to get it to work...there isn't even a tv button etc ... im guessing it needs a dang code. anyone with help it would be appreciated. "eyeroll" we r raising autistic gson and it is helpful to have a working remote. everything i find is to make a element remote work on a samsung..lol!
The best I can give is a link to Element T.V. support website:
www.elementelectronics.com/support/
Sorry for the inconvenience. Don't know everything about Element TVs. Shared only what I knew
Is there a button that changes the mode like tv or DVD or anything like that my remotes not working and tv is new
Tony Z the remote I've shown in this video has a "Source" button which contains "TV" (cable wire), "Component/AV" (Red wire, Yellow wire and White wire), "HDMI (1-3)" (HD port Wires for DVD/Blu-Ray players, Video game consoles) "VGA" (For VHS players) and "USB" (Cellphone, Tablets). These are the sources for which are on the remote control. The setup is on the back of the TV. I hope this helps you out. If you still have questions, don't hesitate to ask me