FINALLY! A FULL VIDEO FOR BEGINNERS!!! Hats off to you brother. This is what we need more of because new RC'rs struggle. There is a lot to know. My first rig is on the way, FCX18 Landcruiser (blue and grey)
Thank you so much for the detail on the trim adjustment of Channel 6. I was having an issue with the rear wheels disengaging when toggling between frw/4wd/dig. Adjusting the trim seems to have fixed it!
Square body beast! I did recently get back into the hobby and chose this as my first 10th scale. It’s freakin sick. Although, after my first run, the low gear does not engage anymore. Found that to be strange. I’m looking forward to more aftermarket support too!
thanks for watching the whole video. If you shifting is not engaging, try adjusting your end points on the remote for that channel I show how to do it in the video. (57:15)
Nice review, Ken! I do wish that receiver was able to be separated cause the TX looks great and I’d definitely want to keep that. But that’s just a small complaint lol. Otherwise it looks awesome! I’ll definitely be adding one at some point.
Thank you so much for this awesome and thorough video. This is my first 10th scale truck and only my second *real* RC car in general so I really appreciated you taking your time to go over so many details. 🎉
cool ken haven't watched for a few week's to busy building and crawling, but like always awesome review. thanks ken " huge fall " shows fms make tough trucks any scale
Back watching again, I just got the skid plates for the unlocking mechanism on the axle housing there looking for a video on how to install for reference
15:05 #BumpSteer ? Happened with previous "1/10" fms model without panhard bar. Fixed on fj40. Most in depth video by far, falls at 1:18:10 😵 Square body beast!
Would you happen to know what the spline count/size of the micro servos are? I'm really hoping for 25t, standard 1/10 size. I really like to know what is needed for spares/replacements and those micro servos are the one bit of information I have not seen.
Hopper, 😂 I think topper was lost in translation. Great review. Got mine on the way( orange and white) along with the new fcx18 c10 pickup they released alongside this. Thanks for the great in-depth review live your reviews.
I really like your explanation on the transmitter. Have you ever thought of getting an M12 4in1 ? I have one and have no idea how to use it, and I believe if you were to get one and explain the way you have here, it would be awesome .
Back again did not get it Monday it got delayed but it will be here today Tuesday, going to be rainy day here in Michigan don’t have to work so I’ll be here when it gets here super cool
I figure if you put grease on that it might hang up that’s just my thought I even will spray all the cables down with it once it dries it won’t attract dirt
My first RTR that I don't want to modify, it works out the box, quite some punch from 3s, and awesome low speed throttle with hardly any whining with good torque. Pity about the ESC,/receiver combo but feel there is a lot of play in it before I need to modify. I will be swapping out the dig feature for RWD, I'll have more fun with that. But overall the only disappointment was the body came with a huge crack init, but I ran it anyway, and I've always found things that surprise me without expecting anything, gets my attention. It has almost basher speeds in 2 nd gear, yet you could still crawl in it, obviously 1st would be better, but even therethe ESC is not whining and does a decent job. Also notable is the throttle response that is so near brushless like, they have really done a good job on it. It along with the 1/18 version are my first crawlers and am enjoying both of them very much. I paid less for both, than a High Trail F150 would have cost, and feel the FCX10 alone takes the win for me.
Btw, CVDs or CVAs on RC cars are not actually true constant velocity. They are no different in physics to universal joints. THe ones people refer to as CVDs are still actually universal joints.
I like the look of the body when it's on the first latches. But the lights don't work. They don't make contact with magnets. All so mine looked like it's squatting. Think needs more oil in shocks. An rear axle doesn't seem to fully on lock on dig . And there $599. In Canada 😢
This rig is obviously not meant to be super scale. You want that, build a TF2 or a BRXO2, etc. It's obviously not meant to be an extreme rock crawler. You want that, build an lcg, MOA, or whatever of either category. This rig is a perfection of in-between, and FMS absolutely nailed it! And at a price point nobody else can compete with or even come close to! I have a TRX4 on stock rails with $1500+ in it that can't be touched in it's class. I'm willing to bet this rig will only need brass internal clamp rings in the front wheels to retire my TRX4. And again, the money spent in comparison. I also have a TRX4- based Negative G with over 3k in it that also can't be touched in it's class. I do not comp or go by rules. I build pure performers without handicapping my rigs, and that's what I do, what satisfies MY needs/wants. I live in the Wichita Mountains Wildlife Refuge range with many of us locals, and many come from all around to experience our slice of endless crawling heaven. We can be out eight hours and not even realize it. Our rigs are built solid and pure performance based down here. Also have many TF2's for scale, from strictly technical trailing to extreme. That being said, what are all these jokers crying about?! This rig is a mix of near perfection of a mixture of all classes straight out the box, and that is exactly what it is meant to be, FOR $399.99 ON THE BUTTON, tax and shipping free to us! Go fly a kite or throw a Frisbee or something. These whine-bags obviously totally missed the point and value in this rig. IT IS GENIUS! SPECTACULAR RIG‼️
@TheShopMiniRC not a problem, brother. You're very welcome! It was a great watch with a lot of knowledge provided in learning this rig while on the wait. I feel I'll already know all I need to know now just from your video alone. So for that, I thank you, as well. What a great, one of a kind rtr platform. Too bad others are so blind. Happy crawling! 🤍🤘🤙
I wonder if they have clear body’s for this car. I typically don’t like to do too much wrenching in my cars but I would try to transfer the lights to a clear body if they have one.
there sure is!! Both fairRC has it: goaff.pro/xghynz And FMS Directly: www.fmshobby.com/products/1-10-chevrolet-k5-blazer-clear-car-boby-kit?_pos=4&_sid=5fe88b48b&_ss=r&ref=Bg_nY7gBriVBzw
Just got mine yesterday. Don't the mini servos come already adjusted correctly? Or do I need to check them. Got the cap and inner fenders on but haven't ran it yet..
They should be fine, we just show in case you do need to adjust. Also, weird things happen all the time during manufacturing, so if you notice the diffs not shifting or piping in and out, it any of the shiftable stuff (2speed, dig, etc) then this shows how to fix it.
@@scottpledge4073 I try. It does take a ton of time though. But I hope the community supports, subscribes and shared everything to help grow the channel. I figure I support the community, the community will help support the channel.
Nice video. I like to install an engine simulator on my fms fcx10 k5, but I could not find out the throttle line. Could you help me with that? Thanks a lot.
Unfortunately there is no channel 2 for throttle. Most 2-1 esc/rx don’t have one. Makes it hard to use sound modules or upgrade to an aftermarket esc without buying a new transmitter and receiver.
@@TheShopMiniRC In your opinion, I have to replace stock transmitter & receiver with new ones If I want to assemble an engine sound simulator? Do I have to replace Esc as well? Thanks.
@@capitalnguyen5624 you would. :( hopefully FMS will be releasing an 11 channel rx that will work with the stock remote. Then you would only need that rx and an esc like a hobbywing 1080.
Subscribe after watching this video Thankyou soooooo much for the great information If possible kindly make full tutorial on how to lube and grease all the stuff in this rc car Its kinda helpful
@@TheShopMiniRC used 2s lipo for one week without problems but when i tried 3s lipo, it worked on low gear but stopped working after changing to fast gear and throttled.
Just about any 2s 4000-5500 battery with a xt60 connector should drop right in. I show the battery tray dimensions if you really want to be sure. Any 2s or 3s with an xt60 that fits in the tray will work.
I believe this rig has the option to run in rear drive as well just gotta tune the transmitter to that option and you should be able to run rwd instead of fwd !!
You can easily switch it to rear wheel. ;) it’s a physical change in the transmission but doable right out of the box. The change gives you Fwd/4wd/rwd.
can i ask you expert opinion, im looking for 10scale scale crawler, if you can only choose 1 brand, what brand is the best quality , performer you can recomend
FMS and Redcat has REALLY stepped up their game. The new Redcat Ascent Fusions is an AMAZING value (as is this FCX10). As for super high quality and performance though, Vanquish makes really good stuff. Usually the best stuff is kinda all custom made from different companies. IMO, it really comes down to a truck you like the looks of. Axial, Vanquish, Redcat, FMS, Element, and yes... even traxxas, all made good trucks at this point.
My research says that this is the best buy for the money. Unless you're a modification fanatic this will do just fine for all situations. Non-scale folks need not apply.
Just got mine, and I am so mad on my order shows black they sent me the brown and yellow one I am so mad just so mad, sent them an email they know I am pissed And on messenger sent message waiting to hear from them I hate the brown and yellow what it took for me to get the money up for the black one and they sent brown yeah I am pissed
@@TheShopMiniRC fair RC yes I heard from them they will send me a return label, I’m not returning I’m keeping it I ordered the black body kit so I will bash the brown one , And have the black one to look good. Question it’s obvious they ain’t got no engineers over there the screw For the light pods to the rollbar three threads ain’t going to get it out of all the screws I have I ain’t got that size they are a little skinnier what size did you use
FINALLY!
A FULL VIDEO FOR BEGINNERS!!!
Hats off to you brother. This is what we need more of because new RC'rs struggle. There is a lot to know.
My first rig is on the way, FCX18 Landcruiser (blue and grey)
You’re gonna love the lc80. We did a deep dive review on that as well!! We want to be sure newbies feel welcome too!
Pretty good review I subscribed
Much appreciated!
Thanks for putting the FCX10 squarebody beast through its paces for us, and showing how to program the transmitter!
Of course! Thanks for trusting me enough to watch a 1 hour + video. ;)
Thank you so much for the detail on the trim adjustment of Channel 6. I was having an issue with the rear wheels disengaging when toggling between frw/4wd/dig. Adjusting the trim seems to have fixed it!
For sure!!!
FCX10 square body beast, i'm definitely going to be watching more
It’s awesome for sure.
Will be interesting to see if FMS comes out with a leaf spring conversion for that chassis, like they did with their first tenth scale chassis...🧐
They likely won’t. The platform isn’t really designed for it.
All this for $400 is great!I don’t need it but what a deal.Great job Fms. 👍🏼
Agreed!
Square body beast!
I did recently get back into the hobby and chose this as my first 10th scale. It’s freakin sick.
Although, after my first run, the low gear does not engage anymore. Found that to be strange.
I’m looking forward to more aftermarket support too!
thanks for watching the whole video. If you shifting is not engaging, try adjusting your end points on the remote for that channel I show how to do it in the video. (57:15)
Nice review, Ken! I do wish that receiver was able to be separated cause the TX looks great and I’d definitely want to keep that. But that’s just a small complaint lol. Otherwise it looks awesome! I’ll definitely be adding one at some point.
I am hoping they release an 11 channel rx soon.
Thank you so much for this awesome and thorough video. This is my first 10th scale truck and only my second *real* RC car in general so I really appreciated you taking your time to go over so many details. 🎉
Glad I could help! It why i started the channel!
cool ken haven't watched for a few week's to busy building and crawling, but like always awesome review. thanks ken " huge fall " shows fms make tough trucks any scale
Welcome back! And huge thanks for watching. I know some of them are king but I try to get as much info in there as I can!!! Hope you enjoyed this one.
And bringing us along that giant mountain Omg that fall,it handled that super good. Incredible value thanks again
Glad you enjoyed it
Back watching again, I just got the skid plates for the unlocking mechanism on the axle housing there looking for a video on how to install for reference
We are still waiting on ours.
Living in Denver and going to RRES was always awesome. Makes me miss it everyday after we moved away.
It’s definitely a great spot and we are lucky to have it.
15:05 #BumpSteer ? Happened with previous "1/10" fms model without panhard bar. Fixed on fj40. Most in depth video by far, falls at 1:18:10 😵
Square body beast!
Hahah yes.. bumpsteer! Thank you. Lmao. Also thanks for the timestamp on the fall ;-p
Diff lock shifter protector available from fms
We just saw that.
@@TheShopMiniRC there are other promising hop ups as well such as metal bumpers, although they are pricey
Man I love how you explain the end points and show it, really appreciate I’ve been learning from you a lot 👍👍😎
Glad to help
My first rc and I love it
The Square Body Beast is awesome, thanks for the detailed controller coverage
Any time! Thanks for watching.
Would you happen to know what the spline count/size of the micro servos are? I'm really hoping for 25t, standard 1/10 size. I really like to know what is needed for spares/replacements and those micro servos are the one bit of information I have not seen.
We will have to do an update video when we find out. We will likely be doing a servo replacement video and will likely find out then.
Well that’s cool it’s got a grease in there, now what I would do now though that slider mechanism spray it with moo slick
Yep!
Awesome video thanks for taking the time to really explain how everything works in so much detail
Very welcome! We try to go deep.
Hopper, 😂 I think topper was lost in translation. Great review. Got mine on the way( orange and white) along with the new fcx18 c10 pickup they released alongside this. Thanks for the great in-depth review live your reviews.
Haha we think so too. Thanks a ton for watching. Our fcx18 k10 video goes live tomorrow. ;)
I really like your explanation on the transmitter. Have you ever thought of getting an M12 4in1 ? I have one and have no idea how to use it, and I believe if you were to get one and explain the way you have here, it would be awesome .
Ive thought about it but I just don’t have the time to learn a system like that right now. Lol
Back again did not get it Monday it got delayed but it will be here today Tuesday, going to be rainy day here in Michigan don’t have to work so I’ll be here when it gets here super cool
Sooooon!
Yes as long as you lined up those grub screws on both ends they will be phased
Very true.
I figure if you put grease on that it might hang up that’s just my thought I even will spray all the cables down with it once it dries it won’t attract dirt
Good tip.
I figured it out I got my differentials locking mechanism brass skid plates on won’t have to worry about that getting broke
Good deal. I hope to have a video soon. Just need to receive my parts.
Thank you for sharing ❤❤❤❤ COOL
Thank you for making an awesome product!!!
Love red rocks but if I can get a new at some point I'll never go back after having 2 of my rcs stolen from there. Good video tho!!
Ooof. Thanks fully we haven’t had anything stolen. Def something to watch for though. Thanks for watching the video.
Square body beast. I watched the whole thing. Great review and I will use for maintenance reference. Ty.
Huge thanks for watching all the way! You’re awesome!
Yep first thing I’m doing my Voodoo KLR/M’s Going on mine with three brothers inserts
Should be good.
Thanks for the in depth dive now save my pennies to get one
Thanks a ton for watching
My first RTR that I don't want to modify, it works out the box, quite some punch from 3s, and awesome low speed throttle with hardly any whining with good torque. Pity about the ESC,/receiver combo but feel there is a lot of play in it before I need to modify. I will be swapping out the dig feature for RWD, I'll have more fun with that. But overall the only disappointment was the body came with a huge crack init, but I ran it anyway, and I've always found things that surprise me without expecting anything, gets my attention. It has almost basher speeds in 2 nd gear, yet you could still crawl in it, obviously 1st would be better, but even therethe ESC is not whining and does a decent job. Also notable is the throttle response that is so near brushless like, they have really done a good job on it. It along with the 1/18 version are my first crawlers and am enjoying both of them very much. I paid less for both, than a High Trail F150 would have cost, and feel the FCX10 alone takes the win for me.
It’s a fantastic rig! Thanks for sharing your experience!!!
Back watching again, just got information mine will be here tomorrow Monday yeah awesome black blazer
Nice to see you back!!!
Oh wow that’s awesome to know, it will bind to my other FMS Riggs cool
Neat for sure.
Such a troll 😂 lol that intro was great, my heart sank, I was like that’s not the big one!
Hahahhaha gotteeemmmmm
Oh man dang it, you got all the nice toys 😁👍👍😎
Hahha we work hard for em
Like the deep dive. Well done, very interesting and informative 👍🏻
Glad you enjoyed it! Thanks a ton!
Thanks for doing this 👍
My pleasure!
This is why I love your videos, now I know how to on mine. Appreciate you 👍👍😎
Glad to help! Thanks!
And the mirrors survived cool well you ain’t gonna get no better How it holds up ability that’s for sure 😁👍👍
Held up well
I just got information mine is out for delivery yeah I’m stoked just waiting on the FedEx guy now 😁😁😁😁👍👍
You are gonna love it!!!!!
Softer Foams would make a big difference wouldn’t get all that bouncing trying to climb up that rock wow what a awesome place I want to play 😁👍👍
For sure.
Yeah I like that for sure , That’s also easy Peezy four screws the motors out cool 👍👍
Yep. I love that.
Oh wow you live close to RC heaven , Gosh I wish that was my playground 👍👍❤️😎
We are lucky for sure.
great job👍👍
great damage but just a body break😱😱
beautiful black cars 😍😍
Yeah. 30 foot cliff will do that. Lol
square body beast !
Yes it is!!! Thanks a ton for watching.
Wow look at that landscape the mountains beautiful dude, if I ever get a vacation I know where I’m heading wherever this is at yeah 👍👍😎
You should!
Do we know what other bodies are coming?
We can’t say. Sorry.
@@TheShopMiniRC Are you able to say how long its going to take for other bodies to come? I would love to see a series 2 landrover or FJ40
@@-1-2-1- it’s likely going to be a while.
Great video as always thank you, this is one of my favorites as well.
Glad you enjoyed it
It's Awesome but wish it had Dean's Plug to go with FMS 24 THAT I HAVE A BUNCH OF 😕😃👊👍✌️🦼🦅🇺🇸
The FMS 24 didn’t come with a deans plug. lol.
Says it doesn’t come with battery, what battery plug is it for I know
Xt60
Btw, CVDs or CVAs on RC cars are not actually true constant velocity. They are no different in physics to universal joints. THe ones people refer to as CVDs are still actually universal joints.
Interesting.
@the shop-mini rc (Flysky FTr12B) 16:52
Yeah, it’s a 12 ch, but will it bind?! That is the question.
Man it looks so good out there dude, love it ❤️😁👍
Thanks 👍
Really great review. I'm impressed with FMS....
You and me both!
I like the look of the body when it's on the first latches. But the lights don't work. They don't make contact with magnets. All so mine looked like it's squatting. Think needs more oil in shocks. An rear axle doesn't seem to fully on lock on dig . And there $599. In Canada 😢
You can adjust your dig lock with the servo endpoints
Way cool loving things so far!!
It’s super fun!
Yeah now that you got the battery tray off, that’s where I will spray my moo Slick all those mechanisms and once dried doesn’t attract dirt
Goodntip
Wow it’s looking pretty stinking freaking sweet love it dang it 👍👍😎
It’s a beaut
I gotta wait 2 months cause I live in Canada. Worth the wait!! :)
It will definitely be worth the wait.
This rig is obviously not meant to be super scale. You want that, build a TF2 or a BRXO2, etc.
It's obviously not meant to be an extreme rock crawler. You want that, build an lcg, MOA, or whatever of either category.
This rig is a perfection of in-between, and FMS absolutely nailed it! And at a price point nobody else can compete with or even come close to!
I have a TRX4 on stock rails with $1500+ in it that can't be touched in it's class. I'm willing to bet this rig will only need brass internal clamp rings in the front wheels to retire my TRX4. And again, the money spent in comparison. I also have a TRX4- based Negative G with over 3k in it that also can't be touched in it's class. I do not comp or go by rules. I build pure performers without handicapping my rigs, and that's what I do, what satisfies MY needs/wants.
I live in the Wichita Mountains Wildlife Refuge range with many of us locals, and many come from all around to experience our slice of endless crawling heaven. We can be out eight hours and not even realize it. Our rigs are built solid and pure performance based down here. Also have many TF2's for scale, from strictly technical trailing to extreme. That being said, what are all these jokers crying about?! This rig is a mix of near perfection of a mixture of all classes straight out the box, and that is exactly what it is meant to be, FOR $399.99 ON THE BUTTON, tax and shipping free to us!
Go fly a kite or throw a Frisbee or something. These whine-bags obviously totally missed the point and value in this rig. IT IS GENIUS!
SPECTACULAR RIG‼️
100%!!! Thanks a ton for the watch and all your in-depth insight! Huge thanks!
@TheShopMiniRC not a problem, brother. You're very welcome! It was a great watch with a lot of knowledge provided in learning this rig while on the wait. I feel I'll already know all I need to know now just from your video alone. So for that, I thank you, as well.
What a great, one of a kind rtr platform. Too bad others are so blind.
Happy crawling! 🤍🤘🤙
This is a very deep dive!!
I appreciate it. Your videos have helped me a great deal
Are used your link I got it from fair RC
Huge thanks!!! You’re gonna love it.
Square body beast!😃💯🤸♂️👍
Facts. Ty for watching.
I wonder if they have clear body’s for this car. I typically don’t like to do too much wrenching in my cars but I would try to transfer the lights to a clear body if they have one.
there sure is!!
Both fairRC has it: goaff.pro/xghynz
And FMS Directly: www.fmshobby.com/products/1-10-chevrolet-k5-blazer-clear-car-boby-kit?_pos=4&_sid=5fe88b48b&_ss=r&ref=Bg_nY7gBriVBzw
@@TheShopMiniRC I don’t have the car yet but it is on my list. Rc can be expensive because imma teen with just a bit of money
Realy nice rig from FMS 👌
It sure is!
Well got the black blazer on the way 👍👍😎
Niceeee
I made it to the end!!! Couple sittings, but I made it😂
Hahah you didn’t post the secret phrase!!!
Just got mine yesterday. Don't the mini servos come already adjusted correctly? Or do I need to check them. Got the cap and inner fenders on but haven't ran it yet..
They should be fine, we just show in case you do need to adjust. Also, weird things happen all the time during manufacturing, so if you notice the diffs not shifting or piping in and out, it any of the shiftable stuff (2speed, dig, etc) then this shows how to fix it.
@TheShopMiniRC thanks bud!! It's so amazing and helpful that you answer everyone's questions
@@scottpledge4073 I try. It does take a ton of time though. But I hope the community supports, subscribes and shared everything to help grow the channel. I figure I support the community, the community will help support the channel.
wish this had the ability for 4 wheel steering like the new fcx18 K10
I mean… it does.
@@TheShopMiniRC explain how
@@GMCOGRE you would buy a second front axle and put it on the rear and connect the servo to an open channel. (Probably channel 10)
@@TheShopMiniRC yeah,dont know why i didnt think of that,already did that on my scx24. hooked to channel 3.
Oh yeah she’s got character now 😗😁👍👍
Damn right!!
You could put some glue in that crack and Clamp it probably would be fine I would get a new part for spare
We shoe goo / e6000d it.
Can you install an engine sound box in this?
You don’t have a channel 2 to “read” the throttle :(
FINALLY 😁
Right?!?!?
Nice video. I like to install an engine simulator on my fms fcx10 k5, but I could not find out the throttle line. Could you help me with that? Thanks a lot.
Unfortunately there is no channel 2 for throttle. Most 2-1 esc/rx don’t have one. Makes it hard to use sound modules or upgrade to an aftermarket esc without buying a new transmitter and receiver.
@@TheShopMiniRC In your opinion, I have to replace stock transmitter & receiver with new ones If I want to assemble an engine sound simulator? Do I have to replace Esc as well? Thanks.
@@capitalnguyen5624 you would. :( hopefully FMS will be releasing an 11 channel rx that will work with the stock remote. Then you would only need that rx and an esc like a hobbywing 1080.
SBB made it to the end. 🤘
;)
Thanks!
Huge thanks to you!!!
Top or canopy
I like those terms for it!
Yeah let’s go drive it 😁👍👍
;)
Yeah square body beast, don’t forget don’t break the expensive parts. I’ll probably be back watch again, until then peace and chicken grease 😁😁👋👋😎
We try to not break em.
Subscribe after watching this video
Thankyou soooooo much for the great information
If possible kindly make full tutorial on how to lube and grease all the stuff in this rc car
Its kinda helpful
Thanks a ton for the sub! I hope this video was a great help!
THE MINI- well not so mini- shop.
Hahaha. The occasional larger scale will make it in. Also, it’s mini compared to a 1/6th or full scale. Lol
What battery would you recommend for the fcx10.
Anything 2s or 3s with an xt60 that fits the battery tray will work. We are using 5200 and 5300 mah batteries.
@@TheShopMiniRC used 2s lipo for one week without problems but when i tried 3s lipo, it worked on low gear but stopped working after changing to fast gear and throttled.
@ oh nooo! I’ve seen many people run 3s with no issue. :(
I wonder if changing to the high speed gear just caused the motor to overheat.
How do I know what type of battery to get?
Just about any 2s 4000-5500 battery with a xt60 connector should drop right in. I show the battery tray dimensions if you really want to be sure. Any 2s or 3s with an xt60 that fits in the tray will work.
Square body beast!!
Sure is!
I have both 419‘s and 475’s
Nice!!
Huge disappointment the 2WD is front instead of rear. Dang
I believe this rig has the option to run in rear drive as well just gotta tune the transmitter to that option and you should be able to run rwd instead of fwd !!
You can easily switch it to rear wheel. ;) it’s a physical change in the transmission but doable right out of the box. The change gives you Fwd/4wd/rwd.
cool new look, RC with great adventure, always good videos bro👍👍😃
Huge thanks!!!! It’s indeed and awesome rc and adventure.
can i ask you expert opinion, im looking for 10scale scale crawler, if you can only choose 1 brand, what brand is the best quality , performer you can recomend
FMS and Redcat has REALLY stepped up their game. The new Redcat Ascent Fusions is an AMAZING value (as is this FCX10).
As for super high quality and performance though, Vanquish makes really good stuff. Usually the best stuff is kinda all custom made from different companies.
IMO, it really comes down to a truck you like the looks of. Axial, Vanquish, Redcat, FMS, Element, and yes... even traxxas, all made good trucks at this point.
thank you i apreciate your reply
Square Body Beast!!!
Indeed! Thanks for watching.
Well only the first scratch hurts 😁😁
Hahhaha sooo true.
My research says that this is the best buy for the money. Unless you're a modification fanatic this will do just fine for all situations. Non-scale folks need not apply.
100%. And aftermarket support is coming!
its funny they put beadlocks on the fcx24 but not this
Very true.
😮😮😮
Ty for watching.
Hi guys
Hey there!!!
No PDF at this time.
Hopefully soon.
Yeah that’s not much play at all, the 24s and the 18 scale lots of play
For sure.
Just got mine, and I am so mad on my order shows black they sent me the brown and yellow one I am so mad just so mad, sent them an email they know I am pissed And on messenger sent message waiting to hear from them I hate the brown and yellow what it took for me to get the money up for the black one and they sent brown yeah I am pissed
I am sure they will take care of you. Did you order from FMS or FairRC?
@@TheShopMiniRC fair RC yes I heard from them they will send me a return label, I’m not returning I’m keeping it I ordered the black body kit so I will bash the brown one , And have the black one to look good. Question it’s obvious they ain’t got no engineers over there the screw For the light pods to the rollbar three threads ain’t going to get it out of all the screws I have I ain’t got that size they are a little skinnier what size did you use
@@andrewrichey7374 I used m2.5. Pretty sure I mention it in the video. They are m2.5 x 14 or 15. Either will work.