How to replace turbocharger core/CHRA, how to fix bad turbo, easy turbo rebuild
HTML-код
- Опубликовано: 8 сен 2024
- Hi,
In this video is bad turbo which had oil leak, so big play in bearings and seals in bad condition.
I decided to go for turbocharger core replacement, CHRA comes balanced and with all new parts so it's good quality repair for low price.
This particular is turbo for 170HP Skoda Octavia, the same Turbo is found on any other Volkswagen, Seat and Audi 2.0 diesel engine.
Procedure for turbocharger core replacement is very similar to any other car brand
Thanks for watching
Hello, this video saved me! Every other video is telling you to take all the exauhst off and turbo out, doing it without a lift is PITA. I wasn't able to reach the VNT arm nut, without taking off the leaking valve cover. But by doing that it gave me a lot of space to work and to brake the turbo in half while in the car. Overall I'm very setisfied with my ebay cartridge. Everything with gaskets and fluids and filters came up to $350 and took me 17hrs to do. Better then $3400 that dealer quoted me. Thank you very much sir!
You are hard core for doing it when its so cold
Hi buddy this is first time I'm writing comment on RUclips, this your video help me allot, thanks for taking your time and sharing the your experience..
Hi,
I'm glad this information helps.
Thanks for watching
Thank You for this kind of showing us How to repair turbo 🤗. We are All going to start service shop for turbo repair 💪🏼💪🏼
Great!!!
I am glad I can share knowledge with others..
Thanks for comment and for watching
Have to hit thumbs up for doing it in the ice outside top man 👍
Thanks for sharing this mate. How many miles can we excpect with a rebuilt turbo with a new CHRA?
Hi, if CHRA is good brand or even OE brand than you can expect it to last as original turbo.
It is the 'in - out' play of the turbo shaft that matters !
Side to side (unless seriously excessive) is a non issue as Oil pressure is needed to enable the correct clearances.
Why buy a Fresh CHRA when a $50 rebuild kit is the only difference between New and rebuilt??
Not much use in scribing the CHRA for Clocking purposes.... when it is going to be replaced ?
Updates?? Did it last? And do you have the ebay/ parts link? Thanks and good job.
hi pls ,is need to drail the engine oil due the return pipe ?
Doesnt show removing the 6mm bolts holding the aluminium housing on to the cast exhaust side does it. See them all except the one under the wastegate actuator.............
Hello mate is giving you any problem with balancing?
Cores come balanced, even cheap China ones, there is usually grinding or part drill holes on the inlet impeller. Trickiest part is making sure VNT actuator on the new core lines up with the VNT ring in the exhaust side.
I can’t not get the turbo core out for my td04 😭
Heat. Alloy and steel expand at different rates, get it up to a few hundred degrees and belt it.