Is this $100 eBay ALH TDI Turbo Cartridge any Good?!
HTML-код
- Опубликовано: 5 окт 2024
- I bought 2 cheap turbo cartridges from ebay to find out if you could even replace the cartridge successfully, and to see if they would work! The results were astounding.
www.aliexpress...
/ jcauleyj
hey so here some info on setting the stop screw if it has been played with ruclips.net/video/iLfSfitbcuM/видео.html , essentially what i ended up having is overboost down low got my rod semi close, then kept going up with the stop until it didn't over boost . i just watched VCDS graphs and played back an forth with the 2 until i got it smooth. i was able to change the powerband massively with the 2 adjustments. now its smooth transition lots of power couldn't be happier. OH btw what IQ are you running at ? im at 5/mg seems better then 4/mg ???
Good to hear! I'm at 3.2 mg IQ but I'm thinking I should go to 4 since it does shudder a little when I come to stops. It's recommended to have a value between 3 and 5.
@@thirdgeargrind ok cool yea i was just wondering where you had yours at, im gonna tune a little more
@@thirdgeargrind after playing with everything(iq,timing,rodlength) i ended up making a DAWES device to smooth it the rest of the way and WOW it smoothed the curve out you should try one out i spent 10$ making mine
Some SOLID, straight up honest, and thorough Journalism work here, and good damn Job having the Integrity to hold these ppl accountable to their actions, and spread the knowledge and awareness. This is a dying art, and a necessary one which we will ALL pay for in the end, if not for your work here. Anyone watching this, owes you thanks. So thanak you, for your honesty, and Integrity.
we must think ALOT alike i just picked up a 99 new beetle 5 spd manual for $400 IT IS SOOOO crispy 180k 2.0 yellow GLS going to drop all my 99 jetta TDI everything into it..... a tree fell on my jetta but its a 99 as well ...... my ALH will LIVE ON !!!!!!!!!!
Thanks for making this video! Any updates on the long term use of the cheap center section?
My $500 golf is needing a new cartridge as well. Really thinking about puling the trigger on the one you bought.
Just found your content, brilliant, love the comparison!
Will be looking forward for you videos from now on!
Nice vid jordan.. Very professional
6:20.. how bout using new bolts??
Hi, are you positive that this ali express cartridge is the same as the one that was assembled in poland that you purchased on ebay? Also the ali express link you have in the description says that the cartridge is for a VNT 17 (European models) not a VNT 15 like the us models
Awesome video! Can you link the cartridge of the one that works?
www.aliexpress.com/item/32859402796.html?spm=a2g0o.cart.0.0.14e93c00CdZa0k&mp=1
@@thirdgeargrind thanks man! Much appreciated
way to go bro'
hi, nice video I bought the piece you suggested in the video and I rebuilt my turbo myself I set the vnt mechanism. . the car works well but compared to the original turbo now the car emits black smoke between 1500 and 1900 rpm and responds slightly more slowly… I have done several tests and this problem disappears if I set the mechanism vnt at -0.4 bar on the stop point but I overboost. now I have -0.5 bar stop point and no overboost but little turbo response. do you have any advice?
nice video it's the route I'm going to go but I'm from the UK so it's a bit cheaper
just found your video , im going to be pulling my turbo apart again i have a "warped" nozzle im going to pretty much do exaclty what you just did to your turbo this time not just clean it out, that was a fail its sticking again , also im getting a stage 1 tune and have 205 injector aswell :)
Lemme know how it goes! I've got 10,000km now on the new cartridge and cleaned VNT vanes with no issues!
@@thirdgeargrind *also im going to clean my housing up more i have rust spots that are higher then the surface lets call it pitting , just in a few spots but it makes the bottom ring sit wonky, and i DID find a bent part, one of the vein blades has a lever that wasn't 90 degree with the face of the nozzle ring it hung up more then all others, i bent it back cleaned behind them all good to go ......... had too extract 2 of 3 vein bolts tonight thankful only the heads stripped, kinda figured it out there where burs and rust deposits i had missed last time. i polished it all up grabbing some bolts in the morning. im going to order 169 center for time im not waiting on dhl, my ONE question is the stop screw....... how is there housing set, and how can i check/home set one i know its not the right way but mixing parts isnt right either lol so is there some way to "check" the stop screw ? im going to backwards check by rod length and when it stops but say you have a turbo thats been played with anyway way to get it back close ?
@@thirdgeargrind basically my turbo stop screw was falling out when i bought the car tried to match the paint, but this leads to how are these new ones set ?
So you could use the first eBay one you got that didn't work but you have to make your exhaust part bigger inside?
Hi great video, I bought the part and rebuilt my turbo. I can't find the right rod adjustment on the set screw. It currently stops at -0.5 bar. I have tried different adjustments starting at -0.6.... I would like to know when exactly it should stop. Thank you very much for your help. Sorry for my bad English
time stamp 6.32 is that a broken exhaust stud I see
Updates?? Did it last? And do you have the ebay link? Thanks and good job,
Yes it's still going, it will not die. The specific links I had are gone but compare product images, they are still out there.
Hi
How did you set the stop?
The screw located on the core.
He'll ya it is I paid 75 for mine its loud on the boost
458 Della Mountain
How can I get turbo rebuilt kit for Toyota Hilux in Pakistan?
Hey! I was wondering how is that turbo holding up? How many km do you have on it? My 2000 jetta TDI's exhaust impeller went flying through the exhaust and I'm wondering if I should consider this option to fix the car. Also, the engine ran away, but I hope the engine is ok... Although I doubt it 😅
@@jeremybriand5196 still just fine
@@thirdgeargrind and how many km do you have on it?
@@jeremybriand5196 I put 30,000km of the most abuse with stage 2 you could ask for (uninterrupted WOT for 5 solid minutes up a mountain, with overboost conditions) and its lived it's life with a different owner for a couple extra years now.
@@thirdgeargrind so if you were to do it again, you would buy another one of these?
@@jeremybriand5196 with no question.
Not at all, mine lasted 3months..😢
I think I your first cartridge is for a vnt17. Not a vnt15
The first cartridge wouldn't have fit into the vnt15 compressor housing if it were actually a vnt17.
@@thirdgeargrind It's a GT1749V, vs ALH GT1749
We got the GT1749V in europe, very slightly larger turbine. They were fitted to 110hp ASV and AHF VE engines.
@@joshuabaldwin3490 Oh good to know I did not know there was a spec with a slightly larger turbine wheel.
Any updates as of today please?
Still going strong
Do you know where to find a cartridge for a brm tdi engine?
7:05 yo, wtf did you put in your tank? 😀
you are not allowed to drive on vegetable oil. you know that, right? =P
That’s just a Tdi
which cartridge did you buy that actually works
Link in the desc.
Is the Aliexpress cartridge the best option?
Works correctly?
Quality as OEM?
In my opinion yes. I installed it 2 years 30,000km ago on my daily and recently inspected it, it's still perfect. I believe so long as I continue regular oil changes it'll outlast the car.
How did it hold up, my turbo is going, and planning on getting this one
Held up great still going.
@@thirdgeargrind How are the seals on it? Any oil getting past into the intercooler etc?
Hi from this video did it last long ???
Still going
So max pending rods are shit dont even bother with it cause i bought one and it hit alittle but the wheel spins i thought cause my last wheel exploded and i re polished it spins super free but u can here a scrape still but not enough to stop it imma try polishing tomorrow and see if not and if u tell me otherwise ill order a oem cart do u have a link to but the oem cartridge thanks
The one I used with success is linked in the description.
Any news of your turbo bro ?
Still runnin
@@thirdgeargrind i have a 1.6 TDI stage 1 tune do you think I will have any probleme ? What do you think the brand powertec ?
@@messi2716 I was running this turbo with stage 1 or 2 Malone, you will be fine. Powertec is good.
Hey how's the ebay CHRA holding up? no problems yet?
Still perfect zero issues, 25,000 km in.
@@thirdgeargrind glad to hear it! i might have to order one here soon after I do more diagnosing on my TDI. was shipping a reasonable amount? I live in the sask country side so I know mine will be more but still a good thing to know.....rockauto's shippings gone crazy the last year.
@@robbalinski1606 Well it was only $40 cdn shipped to the west coast.
@@thirdgeargrind thats cheap! perfect, thank's for the help man. Hi from Sask.
And at the end we find out that the car eith new turbo smokes like a hell. Redo that stage X remap! Have a shame!
That was actually because of the primary egr gasket on the manifold that I reused that had blown out completely. It doesn't smoke like this at WOT anymore.
Did You remap the ECU ?
The car had a stage 1 Malone tune and I had put 205 nozzles in.
What company tune
The car is a stage 1 malone tune.
I know the whole video was seeing if you could go cheap and win but seriously.. you couldn’t lash out $3 for new bolts?
It wasn't because I was being cheap it was because I wasn't willing to wait 2 weeks shipping for bolts. I could have ordered in advance but I wasn't that organized lol. Being in Canada our stock of odd ball bolts like that is non existent.
@@thirdgeargrind I mean a cheap repair, I’m not calling you cheap! That’s understandable, I’m in Australia and have most stuff available within a half hour.. I wouldn’t have thought it would be that hard to get bolts?
Aiurea, nu se vede nimic interesant la volan.