Make Your Own Engine and Transmission Mounts
HTML-код
- Опубликовано: 21 авг 2024
- How to make your own engine and transmission mounts on a custom Jaguar XJ6 Rock Crawler... and any other thing you might want to make mounts for.
*
Vote for Us HERE: www.onxmaps.co...
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout: www.onxmaps.com/
#onXbuildchallenge #onxmaps #bleepinjeep #bleepinholygrail
*
Like this video? Here is the Whole Series:
onX JAG Build Part 1 - Offroad Meets Luxury: • Our Next Build is Offr...
onX JAG Build Part 2 - JAAAAAG: • JAAAAAAAAAAG
onX JAG Build Part 3 - Calling Out My HATERS: • Calling Out All 1st Ge...
onX JAG Build Part 4 - Cutting up the Truck: • There's No Turning Bac...
onX JAG Build Part 5 - Dodge Dominates Rock Crawling: • Old School Power: STOC...
onX JAG Build Part 6 - 1st Gen Dodge No More: • 1st Gen Dodge No More...
onX JAG Build Part 7 - I Cut Into the Gas Tank: • Things get SPICY with ...
onX JAG Build Part 8 - What Will $6500 Buy Ya: • What Will $6,500 Buy Ya?
onX JAG Build Part 9 - Ian Visits the BleepinJeep HQ for OnX: • @bleepinjeep's Wild Ja...
onX JAG Build Part 10 - Jag on Dodge: • Building Our Jaguar Mo...
onX JAG Build Part 11 - How To Set Up Leaf Springs: • Why Leaf Springs Suck ...
*onX JAG Build Part 12 - Make Your Own Engine and Transmission Mounts: • Make Your Own Engine a...
Get 20% OFF ONX GPS Maps: Enter code “Bleepin20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF PowerTank: Enter Code "Bleepin PT" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get 10% OFF EZ Flate: Enter Code "BLEEPINJEEP" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.co...
*
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on RUclips: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep...
• Or Just leaving a kind comment on FB here: / bleepinjeep
*
*This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
How to make your own engine and transmission mounts on a custom Jaguar XJ6 Rock Crawler... and any other thing you might want to make mounts for.
*
Vote for Us HERE: www.onxmaps.com/offroad/app/build-challenge#build-vote
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout: www.onxmaps.com/
#onXbuildchallenge #onxmaps #bleepinjeep #bleepinholygrail
*
Like this video? Here is the Whole Series:
onX JAG Build Part 1 - Offroad Meets Luxury: ruclips.net/video/HbEGBIjKRRw/видео.html
onX JAG Build Part 2 - JAAAAAG: ruclips.net/video/UMKkY3e2VHg/видео.html
onX JAG Build Part 3 - Calling Out My HATERS: ruclips.net/video/sxlqDcCT3FI/видео.html
onX JAG Build Part 4 - Cutting up the Truck: ruclips.net/video/pha2_toXdjY/видео.html
onX JAG Build Part 5 - Dodge Dominates Rock Crawling: ruclips.net/video/VtmXo0WHKjU/видео.html
onX JAG Build Part 6 - 1st Gen Dodge No More: ruclips.net/video/IiipeeMd4wU/видео.html
onX JAG Build Part 7 - I Cut Into the Gas Tank: ruclips.net/video/Vu7lfDWmUKc/видео.html
onX JAG Build Part 8 - What Will $6500 Buy Ya: ruclips.net/video/1MH-2PVCBUE/видео.html
onX JAG Build Part 9 - Ian Visits the BleepinJeep HQ for OnX: ruclips.net/video/IziBr2c2d-w/видео.html
onX JAG Build Part 10 - Jag on Dodge: ruclips.net/video/Hqph0MpiWPo/видео.html
onX JAG Build Part 11 - How To Set Up Leaf Springs: ruclips.net/video/aOhrp49BsOo/видео.html
onX JAG Build Part 12 - Make Your Own Engine and Transmission Mounts: ruclips.net/video/tlEI0d44W1w/видео.html
*
Get 20% OFF ONX GPS Maps: Enter code “Bleepin20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF PowerTank: Enter Code "Bleepin PT" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get 10% OFF EZ Flate: Enter Code "BLEEPINJEEP" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.com/member-discounts/
*
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: www.patreon.com/bleepinjeep
• Becoming a Member here on RUclips: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: facebook.com/BleepinJeep
*
*This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.*
Please turn your microphones up
Why didn't take the 4 bolts out and weld it without the rubber bushing?
@@wtftolate3782 engine would go boom on the floor then never line back up
Salute lunch lady! She rocks! ! !
When you get this finished, I want to do a little unauthorized driving of this rig.
We all know how you drive... mostly with daylight under the tires!
YES!!!! New episode!! The wheel lugs tips were fun, don’t get me wrong, but I’m dying to see the marriage of this jag body and dodge frame ❤❤❤
Me too
22:50 Nice to see your Plasma Table is still getting lots of use! Those cutting slats have grown a little bit, but look like they have a few miles left. Thanks for the shout out!... We discontinued that original design, but do still have a round tub option along with the roll arounds that you mentioned. Your Jag build is coming along nice, lots of custom tabs and brackets to make. I can't wait to see the rest of the progress!
I need some new slats, do you still sell them or know what size and total length I need?
@@bleepinjeep We could certainly hook you up with new slats, or some 1/8" x 2" flat bar is all you need for new ones. 17 feet would replace all of them.
For the zerk fitting on the cross member , point it down and drill a hole in the skid plate so you can have access to the fitting.
You are a craftsman. Your rigs usually can go through anything out there
I've welded in a puddle before 😆. Looking good 👍🏻. I put that floor winch in, 1000% more convenient.
I know I'm not an expert, but I really think you should have boxed in both sides of the frame of the engine and transmission and a little bit further back to keep from torque twisting. Those motor mounts seem a little sketchy. Keep up the great content! I've been watching you guys for years! Thank you!
Ohh we aren't done yet. Lots more fabrication before this thing hits the rocks!
Nice job guy's, man this Jodge is really comin together. Cant wait to hear it fire up. Goin to vote right now. Can't wait for the next video.
Now that is a proper lunch...
Wow...
Hey Matt, first off I enjoyed meeting you and Hope at Jeep Invasion 2022!
I watch your videos on my TV, so don't have the option to comment there... I was really hoping to see the Jag go all the way on the vote, and voted several times for y'all. However, now I'm voting ABP (anybody but paul) his head is big enough already 😁
Anyway, I'm looking forward to seeing your rig completed!! And hope to catch up with again someday!
Keep on Building!
ive watched the start to the other 2 onx builds an your frame cut is for sure the best one
We aren't cutting any corners 😆
@@bleepinjeep Thats what I like to hear
911 still makes that plasma table dust catch, and they also have two or three other configurations as well. I have a set of their plasma stencils, and they are very handy.
Glad you like the plasma stencils! We switched up the tables when we came out with the new adjustable length clamp design, that's what also allowed us to make the new versions too. That version Matt has is still a great one though.
Yeah, It's on the list of shop tools I want to buy. I also forgot I have your roll cage coping tool, and it has saved my bacon several times 😅
Great video Josh and Matt and 😱 Tuscany Chicken! 💕🤤 Mamma mia! Great job Hope👏👍🍗🇮🇹
Hope is the best!
Rigs coming along great, beautiful lunch served with a lovely smile, can't ask for more, thanks for sharing ,all the best to yous and your loved ones
31:29 - 😂😂😂😂 Idk who would even hate on chicken tenders, that sounds delicious!
man lunch looks great.
It really looks like an 80's backyard slop together junk I would of seen when I was a kid, and I am fine with that. Good job!
So far... itll be together in the end.
She's coming along
It makes perfect sense to me.. 😊
The infamous words it’s kinda good. I enjoy fabrication and your videos show what you can do without billion dollar sponsors.
My tape measures all show tenths (.9 as well). They are all Stanleys, the only brand I buy. I'm a machinist and we work in tenths (.1) all of the time.
This is awesome, and of course bonus points any time the lunch lady is in a video.
I really don't get how fab rats has so many votes already.
LUNCHLADY❤ Love Hope's SMILE❤
Great video.
It’s gonna draw quite a crowd at sema! Mostly people wearing crocs but they’ll be all over it
29:15 my new favorite noise 😎 I’m gonna make it my phone ringer
🤘😎🤙
Your going to have so much room for activities with that big ol 4 door Sedan cabin on there.
I hope so! Need room for that #overlandinglife 😁
@@bleepinjeep I think it's going to be awesome, naming it te Holy Grail is perfect since its shapimg up to be quite the Luxury Buggy!
Stoked to see the rear end come to life. These builds are super fun to follow along with.
Love watching y’all. How many days since last accident? Haha God Bless 😊
Hahah planned obsolescence on a trigger. those sneaky little computers.
I only watch for the lunch break.
Lol. You're worried about how to access the grease fitting on a bushing that will never ever spin, since it's now a stationary trans mount and not a control arm bushing.
You guys are awesome.
I keep voting for you guys. Every day if I remember…
Thank you
after this one complete, put the holy grail square body on the yota frame and build a crawler out of that..haha..
Lol, yota is a dwarf compared to that 1st gen
@@bleepinjeep it will look hilarious..haha..
It makes more sense than you know. ✓
It's only as cobbled together as most Sema projects
All hope's meals look well balanced and yummy!
Im happy when my wife makes me toast. What an AMAZING wife you have!
I think when everyone's vehicle's are all together, find out what each vehicle weight's. With that motor y'all might be heavier than Robby's Delivery van .
Man U guy got a lot of time to finish the sema build………y’all lucky bc most peeps have only 20-30 days to start and complete a build 🙌🏻
Well this one can't have Bluetooth driveshafts 😆
Give me all the tedious content! I gotta get through the work day with something!
sorry dude im going with clint builds it with rory, never was a limey lover except for triumph tr6 cycles /dirt
watching the weld on an oled monitor it feels like i do need my hood on lol
This isn’t just a SEMA car it’s a SEMA car with a $20,000 budget which is pretty insane.
Right! Next year we need at least a half mil!
To bad you didn't make this a longer video with more things getting completed.
I got my trigger replacement on Amazon...lol
Matt, please make sure the killer dowel pin has been addressed in that engine! Hate to see it destroy itself on the trail.
I think it has but if not, do you know how to tell?
Couscous might sound fancy, but it is not. It is bleepin yummy though!
You guys rock!!
you could just use water soaked frozen rags
Chicken tenders and fries yummy 😊
😎
flat paint will dry quicker than gloss but it has zero protective qualities due to being so porous. the glossier the better. people found this out the hard way when flat painting cars were the rage. they found the best way to have a flat finish that was protective is to paint the car in gloss then finish with flat for looks.
When you are welding, It would be nice if you could film through a welding mask some times so we can see what you are doing through your point of view.
I'll try and do that more. I do have a welding 101 video if you are interested in the technique and how-to of it.
@@bleepinjeep Thanks Matt. You're awesome.
What the heck is a coosecoose?
It's just noodles in a little round pea shape
Can you explain why you put the bushings on the end of the transmission cross member?
The engine is mounted on rubber, so the transmission has to be mounted on rubber as well. Otherwise one would flex, one wouldn't, and something would break. Usually the rubber on a transmission mount is under the transmission about 3 to 5 inches thick. But we don't want that for a rockcrawler. Belly clearance is key.
Not for nothing but do you really need a grease zert on the transmission crossmember? Once its mounted it doesn't move. There is no real flex there so don't think its going to matter. That said I think you guys build is the best one out of the build challange vehicles and yes I vote every day for you guys...🤓
Probably overkill but it was already there so...
Was that a wishing well
Solvent tank?
Skid plate 😂
do you not foresee any problems with rubber mounting the engine and solid mounting the transmission??
They are both rubber mounted
I'm not familiar with diesel engines, but why do they weigh so much? I'm curious about why the need for the extreme weight. Thanks!
Well in Europe they do make smaller diesels but because of smog regulations here in the USA the smaller ones never caught on and the ones here are mainly for big trucks hauling heavy loads. They produce a lot of Torque.
13:27 Content cleaner?!! Freudian slip much???
You should toss that ac compressor back in and turn it I to an air pump
That would be sick if we have time!
@bleepinjeep you could just run it straight to an air fitting on the bumper or something rather then doing a tank and all that.
what blade is that on the chop saw
amzn.to/4cWnUFq. This is the saw, blade is the one it comes with, 66t metal blade by wen.
0 sugar?
thats just backwoods powder coating lol
Right!
I want to come work with you for the lunch ladylies food mmmmm mmmm good
A thousand-pound motor in a rock crawler. What is this backward world?
It's great huh?