BUILD A BAD A$$ Turbo kit at HOME!!!! 106mm turbo!!!
HTML-код
- Опубликовано: 3 окт 2024
- Storm Hub Training
/ 220362996157564
Small Tire Outlaws
/ smalltireoutlaws
NEW ONLINE STORE!!!
lsnasty.com
lsnasty.com
Follow The LS NastyChannel: / lsnasty
@ls.nasty
LS Nasty
700 N 13th St
Erwin NC 28339
Subscribe, comment and like
Follow Me!!!
Facebook: / johndocyt
Instagram: John_Doc1
Instagram: cowmaro
Instagram: LS Nasty
DEVIN's CHANNEL.... HOLLEY INFO!!!!!
/ boo00st1125
wilsonmanifolds...
(10% off code: John Doc)
deterscustomfi...
www.tkmperform...
www.motionrace...
www.texas-spee...
strangeengineer...
www.trzmotorsp...
huronspeed.com
RJS Racing Equipment
www.rjsracing.com
Brazzel Performance Fabrication
252-675-2582
For all Apparel Needs
www.nctrophyca...
It must be Christmas john just gave phil a compliment on his work
🤣
Pops out content on Christmas Day.. thanks John..
The knowledge and tips coming from these videos have been super helpful and informative to newbies like myself. Definitely learning and plan to apply to my current 78 camaro project on my channel
Howed it go?
Depending on the converter ima say 15 seconds without and 7 seconds with the giggle gas.
Gonna be a sick build!! Merry Xmas john and the whole LS Nasty family
I guess 2 weeks and 3 seconds. lol. Love it dude. I know you can do it john. Stall size increases with attempts. Might as well order a converter now. I bet the black sheep converter would even let you get it on the chip.
3 seconds on 150 shot I think the trans will blow up before it spools that big turbo haha Merry Christmas and God bless
Job security
I'm not optimistic about that 4.8 spooling that turbo. I think 7.5 seconds with nitrous......never without.
with 3" hotside and a 106 on a 4.6l...he's not spooling anything.
@@Iknowvfx looks like pretty big primaries on those headers too. RIP
VS Racing 88mm is what you need. Also...3" hotside...you're on crack...2.25" mains on each side is good for like 1800hp. That turbo is going to be a slug. That thing with nitrous will still take over 7 sec to spool.
I have to most powerful sbe 4.8 and it makes 1867 hp.
Better make the turbo bracket off the front edge of the motor somewhere because If you mount it to the chassis it’s going to break the pipes and it would be heartbreaking to see that happen
I've been watching old LS Nasty videos since 6:30 this morning! Merry Christmas everyone!
Love the content. Merry Xmas to you and the crew at LS Nasty
7 seconds without/3 seconds with. Cant wait for the build
Merry Christmas John.
Merry Christmas.
Merry Christmas everyone from my family too LS Nasty!!
That exhaust y pipe looks like a but with legs from the back side.
Talk about getting that V you going to make our boy in Canada very proud with that.
I would say a 175 shot I'm I'm loving all of the projects that going on for the next Racing Season coming up in a few months in 2021 let's start taking Home the 🤑🤑🤑🤑🤑🤑👍🏼👍🏼👍🏼👍🏼🙏🏽🙏🏽🙏🏽🙌🏽🙌🏽🙌🏽☝🏽☝🏽☝🏽🎆🎆🎇🎇🌠🌠😏😏😏👁👁👁🎯🌟🌟HAVE A VERY BLESSED MERRY CHRISTMAS YOU GUY'S.
Do the spark plug wires clear those flow tech up and forward headers?
A long time, 400 shot not long !!
LS Nasty neverstops!!!
If I have a turbo that doesn’t fit my engine can I make it fit by just having a pipe that fits the turbo and then fits into the exhaust manifold without any issues
Merry Christmas John doc and the rest of the crew at LS nasty and Phil too.
And merry Christmas to all of yall at lsnasty
Hello living in Lillington North Carolina would like to get with you on doing a twin turbo for a Mustang V6
Will a Stroked out 6.0 twin turbo last as a Daily driver????
10 seconds without nitrous 5 seconds with nitrous .
Where did you get that exhaust piping? Looks nice and thick for what I wanna build. Does anyone know?
Merry Christmas!! Ummm 8 seconds with and 18 without
Merry Christmas LS Nasty crew
12 seconds on motor
4.5 seconds on spray
If it spools off the hose I feel like the converter will be severely compromised and slip like a bitch down track. Have to run ALL the dump valves. So I’m gonna go with it won’t off the bottle with the converter properly sized for down track. On the spray I’ll say 7.7 seconds including dump valves
6 without and 2.5 with spray
what size is the engine it better be a 400 something +, 106mm turbo is way to big for anything under it and would spool in about a week
Merry Christmas to all you guys keep up the good content
Spray the impeller with the nitrous, no issues regarding spooling then
I want to do the storm work opportunity so bad but I still have 1 year left on my contract at bragg😢
5 seconds without nitrous and 2seconds with 200 shot of nitrous
15.3 sec with out the juice. 9.6 with the juice
11.5 nos 4.8
No nos 3.8sec with the gas 1.2sec
14 seconds without the gas an 9 seconds on the gas... depending on the converter though!!
You always say "first link in the description" when it never is.....
Merry Christmas anyway!!!
Check again!
@@JohnDoc 4th link
Yay, it's fixed!!!!!
Definitely need the nitrous
your gonna need those flex pipes. ive done exhaust for almost 30 yeaes. youll need them.
Why the 317 heads on it?
9sec with nitrous and 20sec without
Where do we get the hot side parts?
Morning fellow students 😀
Class In session 😎🤠
Put the Pipe in a Vice like Brazzel did. Make it square , then hammer to fit them fill the seams.
15 without and 6 with nos
7 w/o nos, 2.5 with!
So what’s up with the procharger all these turbo cars you need at least one procharger car
Squid Billy will getting the crank driven procharger. Yesterdays video
13sec n/a 4.5 nos
Be about 8.9 sec without and then 3.7 with
what cam are you running
6.5 sec and 3 sec with nitrous
8 solid second's ONLY motor.. With 100 shot, 5.3 second's.. #LSNasty
8sec motor. 3.5 Nos
13 seconds to get there without the giggle gas, 6 seconds with it. Depends on the converter, though.
5.7 seconds with a 150 shot, 9.1 seconds without for 10lbs
Didn't show the build?
I’d say like 15 seconds with out nitrous and probably 5 with the 150 shot
12.8 seconds without spray ans 6.2 with spray.
I reckon it would’ve been better facing that exhaust down under the engine you don’t need to see it
3 days without nitrous
Why the 4.8? What happened to the TKM prep'd 460?
5 seconds no nitrous 1.897 seconds with the nitrous
2.5 with nos
5 sec with out 2 sec with the nos
10lbs from that giant turbo will prob blow up the stock bottom end 4.8 . But if it doesn’t blow up than 36 seconds or 16 seconds on 100 shot .
Merry Christmas bro....go home!!!
9 seconds without. 5 seconds with nitrous. Can't wait to see it!
Love the vids man
8 seconds, 4 with giggle gas
9.2 seconds without. 4.2 seconds with nitrous
8.5 without, 3 with
Without the nitrous it will take just long enough to smoke the converter and transmission... with the nitrous 3.5 seconds
10.3 without nitrous
3.72 with nitrous
17 seconds without 8 with
today with nitrous tomorrow without
Will those flow techs fit in a 5th gen camaro?
Probably 35 seconds without n20 and 9 seconds with
Well I didn't know how to build out a turbo from scratch before this video, and now I still don't...
So after this 4.8l gets sent to the moon you should build the worlds biggest LS for it
Might spoil with like 14 to 1 compression 😂
4.8 seconds with nitrous
Nice! I’m an orbital Welder, that looks like .065 ultra high purity sanitary fittings like we use. We do pharmaceutical ultra high purity piping. I also do auto cad so with the center to center measurement from the headers I can make a 3 d model of the piping and weld it with an orbital machine which will make perfect welds inside and out. All our welds are bore scope inspected. Hit me up, I can hook you up bro. I can do it on the side for a very reasonable price. I am a American Craftsman Local 72 Atl Plumber /Pipe-fitter. We are the highest trained professionals in the industry! No doubt
10 seconds without and 3 with 150
8 without 3 with
4.5 with the o shit juice and 6.5 without
12 seconds without nitrous about 7 seconds with nitrous
I'd say 8.5sec no juice and 3.3sec on the juice.
6 sec. Without / 3 with
11.5 seconds without help, 3.5 seconds with n2o. Good luck and keep up the good work.
Dude I have 35years experience with heavy equipment I need some money too
Its gonna take 9 seconds to spool that big thing up!
5.8. And. 2.8
14 sec with out 8 sec with