Was impressed watching this guy TIG in Lowbrow's sportster hardtail video. Watching him get to these bungs, completely awkward position, and make 'em look that good is other-worldly. Not sure he's human.
Thanks Tyler, another great vid! I'm using a 2 1/2 gallon Triumph tank on my 66 TR6R Bobber so a bit easier. It's your rear fender vid that I'm waiting for! Thanks again from UK.
It's great to see Todd putting the boss to work . looks just like the frame on my 72 Bonnieville chopper .ever think about copeing the front bung to fit the frame . like the rear mount .
@@lowbrowcustoms haven't forgotten about y'all . still need a bunch of parts . only problem is wife has breast cancer .had to put the chopper on the back burner for awhile . one day though be giving you a call .
Should there be something used to seal the edge of the paint to prevent chipping or paint corrosion? Wonder if a carpenters snap line would give a nice center mark.. or plumbob?
What filler rod are you using? ER70-S2? If so is that ok for tig welding the front bung into the casting that’s part of the steering head on that bike, or an Ironhead sporty?
we carry two from Voodoo Vintage, they are made to order. www.lowbrowcustoms.com/voodoo-vintage-fabrication-yamaha-xs650-1971-1982-hardtail-frame.html and www.lowbrowcustoms.com/voodoo-vintage-fabrication-yamaha-xs650-1971-1982-mk25-hardtail-frame.html
Hello there.. very interesting video, as always! I am interested in the air pod filter which used on the bike, does lowbrow selling that also? Thanks in advance
im no expert but i know flux core wire does burn hotter then solid wire so if you do try to use flux core dont weld with the bolt threaded in because the heat expansion might cause the bolt to fuse to the threads..which would be bad.
This maybe a stupid question but...do you know of anyone who can fabricate a hardtail frame for a 650 royal enfield interceptor?.I would like the frame to resemble the triumph frame in this video. Thanks in advance. Take care on the road . Peace out ✌️
Most of our banana tanks are made for Triumph but there is one that is the frisco mount banana tank that can work well for Harleys. They are top mounted tabs so you would have to drill into your frame and drop top hat bungs in, weld them to install the tank. If your sportster is fuel injected you would have to install a fuel pump bracket and fuel pump as well. Where there is a will theres is a way for everything ya just have to have some fabrication skills. heres link to the tank - lowbrow-customs-llc.myshopify.com/admin/products/4851499434031
Was impressed watching this guy TIG in Lowbrow's sportster hardtail video. Watching him get to these bungs, completely awkward position, and make 'em look that good is other-worldly. Not sure he's human.
he's the owner too :)
Have known these guys for years.....
and they continue to go the extra mile to inform and educate others with their passion
Just started back into my KZ bobber again. These vids help immensely. Thank you.
Hello from Jacksonville Florida. Good to see ya
Thanks Tyler, another great vid! I'm using a 2 1/2 gallon Triumph tank on my 66 TR6R Bobber so a bit easier. It's your rear fender vid that I'm waiting for! Thanks again from UK.
Working on the rear fender video next! - Tyler
great vid Tyler and co......thanks for taking the time and effort to guide guys like myself along the way.....cheers from Australia
Thanks! You keep cranking out the good videos, I’ll keep buying your good stuff. Just like it’s supposed to work.
It's great to see Todd putting the boss to work . looks just like the frame on my 72 Bonnieville chopper .ever think about copeing the front bung to fit the frame . like the rear mount .
yeah we did. This is the way todd wanted it though.
@@lowbrowcustoms haven't forgotten about y'all . still need a bunch of parts . only problem is wife has breast cancer .had to put the chopper on the back burner for awhile . one day though be giving you a call .
Thank you for what you folks do - and how you do it.
Thank you for the love and support, means a lot to us!
good job Tyler,waiting for the rear fender mounting.I had a triumph chopper similar as this one in the 80's.triumph biker from france
Coming soon! We will film a rear fender install in the next couple weeks in my garage and get it up here... - Tyler
Just love all the videos from lowbrow
Hello to all you at lowbrowcustoms
1st Inspire builder here.. im making video of my build😁
why are the comments always off ? i restore bits in ohio and would like to see comments in lowbrow videos ... you guys do great work!!
Should there be something used to seal the edge of the paint to prevent chipping or paint corrosion?
Wonder if a carpenters snap line would give a nice center mark.. or plumbob?
Tyler. Love it man. Have a bone stock ‘69 Tiger gonna hardtail through your LB kit
What filler rod are you using? ER70-S2? If so is that ok for tig welding the front bung into the casting that’s part of the steering head on that bike, or an Ironhead sporty?
Que projeto incrível !!!!!!!!!!!!!! 🐴👊👍👈🏁
Zi was wondering when you were gonna move the seat out of the way😜
Does low brow make a weld on hardtail for the xs650? Or is that overkill and unnecessary? Looking to do a 650 build over the winter.
we carry two from Voodoo Vintage, they are made to order. www.lowbrowcustoms.com/voodoo-vintage-fabrication-yamaha-xs650-1971-1982-hardtail-frame.html
and www.lowbrowcustoms.com/voodoo-vintage-fabrication-yamaha-xs650-1971-1982-mk25-hardtail-frame.html
Just an idea; Why not braze the mounts to the frame?
EDIT: Just realized that may fuck up the paint, if you're keeping the rest of the paint.
Hello there.. very interesting video, as always! I am interested in the air pod filter which used on the bike, does lowbrow selling that also?
Thanks in advance
Yes we sell them. www.lowbrowcustoms.com/british-standard-pancake-air-filter-triumph-bsa-center-mount-1.html
Hey Lowbrow, can I weld those bungs in with a Fluxcore Mig set up? Or do you recommend them to be TIG welded only?
im no expert but i know flux core wire does burn hotter then solid wire so if you do try to use flux core dont weld with the bolt threaded in because the heat expansion might cause the bolt to fuse to the threads..which would be bad.
Could you tig with silicon bronze?
This maybe a stupid question but...do you know of anyone who can fabricate a hardtail frame for a 650 royal enfield interceptor?.I would like the frame to resemble the triumph frame in this video.
Thanks in advance.
Take care on the road .
Peace out ✌️
no sorry not at this time. we will look into making them soon though.
Are these usually too long for a Sportster bobber?
Most of our banana tanks are made for Triumph but there is one that is the frisco mount banana tank that can work well for Harleys. They are top mounted tabs so you would have to drill into your frame and drop top hat bungs in, weld them to install the tank. If your sportster is fuel injected you would have to install a fuel pump bracket and fuel pump as well. Where there is a will theres is a way for everything ya just have to have some fabrication skills. heres link to the tank - lowbrow-customs-llc.myshopify.com/admin/products/4851499434031
What bars are those?
I believe they are these. www.lowbrowcustoms.com/collections/motorcycle-handlebars/products/emgo-chrome-7-8-in-no-10-off-road-handlebar
Blue Dykon any Alec Steele dudes here?