Nice Job Bro ..I just had my original windshield replaced yesterday in my 2005 F150 supercrew. I got some questions what are the part number to the wiper cowl rubber pieces I need a set and that windshield trim molding can those be replaced or get new clips, also do they have a part number..Any info would be Greatly Appreciated...Thxz Bro
@supremeautoglass hey brother thanks for the informative video. I need the clips that hold the weatherstrip in place as well. Can't seem to find them... So you know where i should look?
I wanted to see how this was done, I own an 07 F150 and I have safelight Installing a new windshield today. I've been driving with a cracked windshield for almost a year, makes no sense because I have Glass Coverage and the New Glass only cost me the $50 deduct able ...Go Figure right.. By the way, Nice job bro...
HAD A NEW FORD OEM WINDSHEILD INSTALLED AT FORD DEALER. 6 months letter it smells so bad like a chemical you cant drive truck? what is this smell and what type glue is used?
What's the name of the black plastic that you removed fron each side of windshield and goes to top of cavin?, need to replace them and I dont know the name of them and buy it
Top of the cabin? Held by Trim Retainer, Side Molding - Driver's Side (LH) - Ford (4L3Z-1803137-AA) and Side Molding - Passenger Side (RH) - Ford (4L3Z-1803136-AA) for 2008 could be the same.
@@johnt1276 Hey man could you please help me figure out the part that the side molding slides onto? In other words, in the video when he takes the side molding and clips off, he slides the molding all the way down and off this track-like piece that stays on the car once the side molding is off... What is that track piece? I really appreciate the help if you can
Nice Job Bro ..I just had my original windshield replaced yesterday in my 2005 F150 supercrew. I got some questions what are the part number to the wiper cowl rubber pieces I need a set and that windshield trim molding can those be replaced or get new clips, also do they have a part number..Any info would be Greatly Appreciated...Thxz Bro
www.americantrucks.com/f150-windshield-wiper-cowl-end-seals-30020.html?AT%20Exterior%20-%20Other%7CStore%20Brand&T5_Var4=T545241&ATF+F150+Vehicle+Medium+LTVMiddle&dialogtech=ppc&T5_Var2=shopping&T5_Var3=red&gclid=CjwKCAjwrranBhAEEiwAzbhNtaCISqpPVP7qtmm0fYn9zw-Y8J8VBG4Zpk_VCQ_ZzuM_pNh4DJgNgRoC1ZYQAvD_BwE&gclsrc=aw.ds
www.partsforsaleonline.com/oem-parts/ford-weatherstrip-5l3z1851222aa?origin=pla&gclid=CjwKCAjwrranBhAEEiwAzbhNtWOaL4Vjktak0SlyahDE_y3b6xzYQ_6zZ0OjKTSkhSGXImNE8S0imxoCgqkQAvD_BwE
Thank Bro!!!💪❤💪 Keep up the Great Work!!
@supremeautoglass hey brother thanks for the informative video. I need the clips that hold the weatherstrip in place as well. Can't seem to find them... So you know where i should look?
@@supremeautoglass nevermind I found it on your comment down below thanks
Nice job bro!
I wanted to see how this was done, I own an 07 F150 and I have safelight Installing a new windshield today. I've been driving with a cracked windshield for almost a year, makes no sense because I have Glass Coverage and the New Glass only cost me the $50 deduct able ...Go Figure right.. By the way, Nice job bro...
What is that removal tool suction cupped to window with the wire called ? Part number?
www.grtglasstools.com/product/wrd-orange-bat-quick-connect-kit-300p/
Thank you! Good video!
HAD A NEW FORD OEM WINDSHEILD INSTALLED AT FORD DEALER. 6 months letter it smells so bad like a chemical you cant drive truck? what is this smell and what type glue is used?
Ford uses their own urethane adhesive. We use SIKA and I’ve never noticed a smell in our urethane. What state are you in?
What's the name of the black plastic that you removed fron each side of windshield and goes to top of cavin?, need to replace them and I dont know the name of them and buy it
www.getoemparts.com/oem-parts/ford-weatherstrip-passenger-side-rh-5l3z1851222aa?origin=pla&gad_source=1&gclid=CjwKCAjw0YGyBhByEiwAQmBEWhm1H7rflHMoRWezBREg2aUYgW2W30Eax9XL6S0otwN-RyJ_2nUPjBoCU5QQAvD_BwE
www.getoemparts.com/oem-parts/ford-side-molding-4l3z1803137aa?c=bT0xJmw9MiZuPVJlY29tbWVuZGVkIFByb2R1Y3Rz
www.ebay.com/itm/364697903014?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=364697903014&targetid=1645685075408&device=c&mktype=pla&googleloc=9031231&poi=&campaignid=20133407470&mkgroupid=147476396765&rlsatarget=pla-1645685075408&abcId=9312979&merchantid=5351177138&gad_source=1&gbraid=0AAAAAD_QDh-2zgHeIfPUatWkLGyv3RTGU&gclid=CjwKCAjw0YGyBhByEiwAQmBEWhVk1ZPB0DwfE7S4ymK96eDw3BUWXGHpO4Apm9OS26dWyTPxZH-i1RoCkKsQAvD_BwE
Top of the cabin? Held by Trim Retainer, Side Molding - Driver's Side (LH) - Ford (4L3Z-1803137-AA) and Side Molding - Passenger Side (RH) - Ford (4L3Z-1803136-AA) for 2008 could be the same.
@@johnt1276 What about the retaining clips that run on the downward slope alongside the front windshield.
@@johnt1276 nevermind I found it. Thanks
@@johnt1276 Hey man could you please help me figure out the part that the side molding slides onto?
In other words, in the video when he takes the side molding and clips off, he slides the molding all the way down and off this track-like piece that stays on the car once the side molding is off... What is that track piece?
I really appreciate the help if you can