I love how you included a section of the video on just cable management! It's great to see how you can turn a rats nest into such a neat bundle of cables! Great video 10/10!
the side fans are backwards, the only intake is from the bottom and much of the air is coming out through the side... (front side and bottom intake, back and and top exhaust) amazing setup ^^
Nice cable management, but you could've avoided so many wires by going with interlocking fans. Also, airflow is not ok, I would stick to the best setup: 3 bottom and 3 side for intake, 3 top and 1 back for exhaust.
The fans from the bottom help the GPU get airflow. The GPU fans take in air to cool the rest of the components, that's why they are on the bottom side of the GPU.
@@princekittipon6510 Dude, this isn't a facebook comment section XD but to answer ur question; I think he could be using the rgb software from the motherboard itself
Guys please, don't look at this build as a performing build... the airflow sucks... there are 7 fans pulling air outside and only 3 pulling air inside the case!!! this build is only for estetic, not for performing systems
so hows your life without one kidney nah im just joking lol amazing build , how much did it cost bro? over here 4090 is 5 lakhs !! oh sorry edited this is for a customer so this is a shop i found out in the end but man wow
спочатку кулера стояли правильно, а потім нові кулери встановили не тією стороною, горе-збірник, головне щоб гарно виглядало, так? 3 кулера вдувають, 7 видувають... логіка...
Nah, PSU is just fine, it pulls air from outside the case, through a dust filter. Ideally I would've designed the case with PSU at the bottom, but I doubt there's much heat from the PSU to affect CPU area.
I love how you included a section of the video on just cable management! It's great to see how you can turn a rats nest into such a neat bundle of cables! Great video 10/10!
Always having nice builds and cable management. We appreciate you!
Came for the build, stayed because of the cable management 🤤
The pulsing to the beat lighting was very nice. Great video. That CPU cooler was nuts. Great job!!
the side fans are backwards, the only intake is from the bottom and much of the air is coming out through the side... (front side and bottom intake, back and and top exhaust) amazing setup ^^
This is probably the most unique build I've seen of the H9.
- You took off the front Glass
- Push pull on the Top Rad
Congratulations on the new pc build 🔥❤✊🏾
I'm building the little brother version of this build. Super hyped.
These h9 builds are gonna be like lian li was....where we all gather around to look at pretty things we will never have
I just bought 😅
Speak for yourself sir. I save my money to spend it on unnecessary shit.
@@joshmehl6164🫡
Never? U plan to stay broke you’re whole life I see
The most flawless cable management system I've ever seen.
When will you guys start putting up the list of items used in every video?!
That ziptie count is gonna be painful to make changes to
Good job it isn’t yours then…
Fantastic build mate!. Congrats!
Mans did that cable like he was doing someone’s hair 🔥🔥🔥
i love that you used thermalright too :)
Gpu needs some sort of support. It's hanging a bit to much for my personal liking
Not yours though is it….
🙄@@user-pj3cw3um6q
Side Fans are mounted wrong. They should blow air in and not out. This can make a difference up to 10 degree celsius for the CPU.
top . side / and 1 rear blow out. the bottom ones just blow in
Hello, can i ask a question ?
I see that you have installed 3 vertical fan, i wonder that placed fan forward like video is better than reverse ?
bro puts every single fan as exhaust ones xd
Nice cable management, but you could've avoided so many wires by going with interlocking fans.
Also, airflow is not ok, I would stick to the best setup: 3 bottom and 3 side for intake, 3 top and 1 back for exhaust.
The 3 bottom intake collide directly with the exhaust of the GPU fans in the video, the H9 flow design seems to be flawed.
@@MishimaZaibatsuCorp the gpu fans are intake i believe, so there shouldnt be a problem
@@MishimaZaibatsuCorpGPU fans are intake…
Absolute madness, especially since there's so many better options than having to deal with that cluster of a rats nest.
What is the point of having all the fans blowing air out of the enclosure ? ...should one not rather provide airflow ?
bottom three blow in
The 3 bottom intakes collide directly with the exhaust of the GPU fans, the H9 flow air-flow design seems to be flawed.
GPU fans are intake…. Crack head
The fans from the bottom help the GPU get airflow. The GPU fans take in air to cool the rest of the components, that's why they are on the bottom side of the GPU.
Should I get 4060 with i7 or 4060TI with i5
What fans are u using?
No airflow?
Можно бесконечно смотреть на 3 вещи: как бежит вода, как горит огонь и как собирают компьютер из топовых комплектующих.
Is there enough place for the 12VHPWR in the Case is closed ?
Hello!. I would like to know How to make the components change the color of the light. Thank's.
Is the cable from the GPU custom or from the power supply?
定制的
@@mzcomputer4355 ?
Push-Pull Config 360 rad at top?
I read in the NZXT page that it is not possible. Kindly enlighten me on this matter.
why did he replace the three side vans they were already rgb and good?
8:36 Видюха под своим весом со временем прогнется и проломит PCI Express разъём 👌👍🤣
Absolutely stunning!!
NIce Video dude. i like this case😃👍
Nice build but side fans are mounted wrong. They must be intake not exaust. Bottom and side as intake, back and top as exaust.
Not seeing a gpu bracket hurts me for builds like these. That pcb is gonna break lol.
where is gpu support
Great video, attention to detail is impressive
How did you manage to sync every led from Other Hardware companys?
probably SignalRGB
Minecraft: Ho, ho! Are you approaching me?
Total cost?
Can you list the part details?
what a beautiful and expensive time to be lived in
wow what program do u use to control rgb of all fans ??
Heelooo
@@princekittipon6510 Dude, this isn't a facebook comment section XD but to answer ur question; I think he could be using the rgb software from the motherboard itself
@@princekittipon6510 NZXT CAM, only program NZXT fans will work with
@@BelLavoroAutoSpa Thats wrong. Signal RGB or OpenRGB are far better. They can control almost every RGB hardware and sync them all.
@@DerUnhold NZXT fans don't connect to the RGB header. They have their own control hubs you need to use.
I was hoping to see when you closed the glass to see the graphics card cable squished.
ziptie ziptie ziptie ziptie ziptie 👍love the cable management
配線職人
fanlar ne işe yarıyor kasada faydası nedir
Amazing !
all fans are exhaust?
It seems that the bottom row of fans are intake. But yes, all of the fans excluding the bottom row are exhaust
Is that a must put a cpu anti bend bracket ?
@@jacekmakes2168 why and what the different ?
@@jacekmakes2168 thx for the info
Does it fit with the panels on???
probably not
Fan F120 rgb or Aer rgb ??
Definitely the F120 Duos
NZXT H9 Flow上面也能做冷排夹汉堡吗?
No
stirx is a new line-up
excellent le rangement des câbles
Why? I have mine. I buy piece by piece. If not most of it at one time. Then you’ll have everything you want over time.
not bad not bad !!!
Amazing
Guys please, don't look at this build as a performing build... the airflow sucks... there are 7 fans pulling air outside and only 3 pulling air inside the case!!! this build is only for estetic, not for performing systems
Song ???
Perfect 👍
No games .. thanks for watching
more than overkill
Jealous?
Sehr gut wie immer weiter so
congrats! 31.03.2023
supperr
HOW MUCH????????????????????????????????
Wth? Only one ssd?
Bro pls build budget pc
Please package nicely and ship to Cape Town South Africa. Much Appreciated! 👍🏽
muito bom
조립도 조립이지만 선정리를 깔끔하게 잘하시네요!!
cpu 쿨러를 배기로 샌드위치 하네요~ㅎㅎㅎㅎㅎㅎㅎㅎㅎ 쿨링 이해를 못하는 사람 같은데요...
why i cant see any intake 😮
Because you didn’t open your eyes…
Br
B4o called me poor in everyway possible
so hows your life without one kidney nah im just joking lol amazing build , how much did it cost bro? over here 4090 is 5 lakhs !! oh sorry edited this is for a customer so this is a shop i found out in the end but man wow
great
The GPU is too heavy...😁
STIRX new OC version from STRIX
Purchase your track today, Guys.
I think minimum this PC price $5K or more
спочатку кулера стояли правильно, а потім нові кулери встановили не тією стороною, горе-збірник, головне щоб гарно виглядало, так? 3 кулера вдувають, 7 видувають... логіка...
Handsome
Ugh I wish they made the strix all black those red and blue accents kill the all black aesthetic
Imagine spending that much on a motherboard just to have the internet drop because of the faulty intel controller lol
What, nobody talks anymore?
bro nice pc but wrong fan config
Wieso bekommt man das so schlecht in weiß :(?
open glass bro
watercooling on the top = fail )
Says every noob builder out there…. Smack rat
TITLE:....NZXT H9 +INTEL 13900K + RTX 4090 >>>>>>>>>>STRIX
I dont think that 6 aio fans really do anything lol
It does a lot actually
@@djdeaddeer how? it doesn't add to airflow tho
@@Anonymous-gn1rk It's a Push-pull configuration. Push-pull gives you better performance than push or pull, but it costs more
@@djdeaddeer so push-pull would just be adding another layer of fans to the aio?
@@Anonymous-gn1rk yes. More airflow, the cooler your cpu will be whether it’s set as exhaust or intake. Better performance all around
Who say me how is the name the case
Read a couple stories about the kinda pcs are hackers and a ddossers set dream.
That isn't a good place for a psu
Nah, PSU is just fine, it pulls air from outside the case, through a dust filter.
Ideally I would've designed the case with PSU at the bottom, but I doubt there's much heat from the PSU to affect CPU area.
oh! my god.....;; He's sandwiching a cpu cooler with exhaust.....That's stupid...ㅜㅜ
Stirx😂
all i can see is money