I didn't believe it myself! A simple idea and useful tip in 7 minutes for metal processing

A simple trick and tip in 7 minutes! This innovative tool is a must have for every craftsman! Amazing metalworking lifehack! Simple hacks, tricks and tips for all craftsmen !!!
==================================
Friends, my name is Sergey! I am the author of the channel Cool Ideas DIY.
On this channel I present everything I have made with my own hands.
Creative ideas, useful tips, inventions!
✅Enjoy watching! Don't forget to subscribe, like, and turn on the bell🔔
==================================
🔥Homemade
🔥DIY
🔥Creative idea
🔥Make in home
🔥Life hack
🔥Crafts
🔥Inventions and tools
🔥Usefull and Helpful ideas
🔥Tips
#Cool #Craft #Diy #Homemade #Welding #Amazing #Ideas
💗Thanks for watching, LIKE, Subscribe & Share!

[@captainotto]

First time I've ever seen knurling being made. Had no idea it was done with a tool like that on a lathe. I always just guessed it was made with a cutter. It's absolute madness just how much one can do with a lathe. Without a doubt that is the single most important invention of the pre-modern era. Also, excellent work!

[@mirosawkrzysztofczyk4788]

Przydatne narzędzie dla majsterkowicza.

[@charlescartwright6367]

That is not a knurl, it is just roughing the surface. Knurling displaces the metal to form a diamond shape, raising of the metal that will be larger than the parent diameter. That type of tool will not work on unsupported material too much tool pressure is required. A tool using opposing knurling wheels like scissors will work better, but still needs some support.

[@grahameblankley3813]

Those trousers are better than having a high visibility jacket 🤣🤣🤣.

[@CoolIdeasDIY-qv1nz]

🙂😀😉

[@ranz2355]

I thought he woke up in the middle of the night from a dream with the idea to build those handles and didn’t take the time to change out of his PJ’s.

[@contessa.adella]

Ok, so it turned out to be a heavy duty tap wrench…Ok I guess. Personally, for the effort involved I’d just buy one, but I guess tye point here is the joy of the home build.

[@stefaniaharper5210]

2:00 Use a center drill. Support it with a rotating center. When you pull out the rod, the axis of the threaded part shifts and starts Lathe runout .

[@stevetravels6160]

do you always work in your pajamas??

[@fredflintstone8048]

Nice project. Given the quality of tap handles that come in modern day tap and die sets, and this goes for the high end sets as well it's a valid project to make your own. The store bought ones lack in quality and don't hold well.

[@Stefan_Boerjesson]

Knurling on that rather long stick out, without support, looked risky, but turned out to work well. Great project.

[@CoolIdeasDIY-qv1nz]

Thank you and welcome🙂

[@Rochesterhome]

Curly is alive. 😀

[@DIY-xx1dv]

Good gob my friend🎉🎉🎉

[@CoolIdeasDIY-qv1nz]

Thank you very much my friend and welcome😉

[@RustyInventions-wz6ir]

Just found your channel and Subscribed. Nice job

[@CoolIdeasDIY-qv1nz]

Thank you, friend🤝

[@453421abcdefg12345]

The accuracy of your 3 jaw chuck is not going to last very long if you continue to use rough black iron in it, you can see how much run out you are getting now, and please use a support if you intend trying to knurl with that push knurler.

[@RCDinsmore]

What bandsaw is that?

[@CoolIdeasDIY-qv1nz]

Hello! METAL MASTER MDL-115

[@MrSnookerballs]

I would have got changed out of my PJ's before using a lathe.

[@raymondsanderson3768]

Why the PJ’s in the workshop? Can’t you sleep? 😅

[@aleksanderkuzmicz7251]

Pomijam fachowość i pomysłowość , to jest oczywiste , ale jestem pełny uznania za porządek i czystość maszyn i pomieszczenia. Szacun.

[@Tensquaremetreworkshop]

Making a tap handle. For which you need a tap handle...

[@GenauMann]

Good idea that 👍🏻

[@CoolIdeasDIY-qv1nz]

Thank you and welcome😉

[@Alejandromundial.]

Muy bien 👍 saludos

[@CoolIdeasDIY-qv1nz]

Gracias, amigo mío. Bienvenido😉

[@lionelchevalier5650]

Very simple but veru excellent, bravo, you're the best...

[@klaus8147]

Der Rundstahl wird zwischen den ersten Arbeitsgängen nicht ausgespannt,so wie hier.Werkstück läuft (siehe Video ) unrund, keine Passgenauigkeit.Werkstück weiter ausspannen.

[@JAYZWORKSHOP]

Nice work my friend 👍

[@CoolIdeasDIY-qv1nz]

Thank you very much and welcome🙂

[@hughh.8075]

Full grown man working in pjs - I’m out.

[@ddoherty5956]

Nice workshop 👍

[@CoolIdeasDIY-qv1nz]

Thank you and welcome🙂

[@YooProjects]

Great idea!!!

[@bigirish4886]

Always thinking great, I love building my own tools too. (: (:

[@benchapman5247]

You need a small hole opposite each hole the tap goes in to allow for a spring loaded tapping centre to hold the tool straight to keep your tap aligned.

[@SuddenSpark]

Nice video sir! Thank you for sharing.

[@erwin.mosselmann]

Nice workshop!

[@nathkrupa3463]

great work bro i like it

[@ChiloyaConstantino-wm4go]

I liked your work

[@stefanov3295]

Molto bravo 👍

[@rubinelemoura593]

Valeu amigo 👊👌👌🤝👏❤️

[@CoolIdeasDIY-qv1nz]

bem-vindo amigo😉

[@kenfox1911]

Whys he working in his pyjamas?

[@CoolIdeasDIY-qv1nz]

It's trendy right now😁😉😀

[@JoseGonzalez-ru6vh]

Excelente idea y una profesionalidad en la elaboración
Gracias por compartirlo.

[@pamukjanos9792]

Jó,jó, de mire talàltâk ki az àllìtható hajtóvasat?

[@user-fk8qz9wj4l]

عمل جيد

[@CoolIdeasDIY-qv1nz]

👍👍👍

[@user-fk8qz9wj4l]

@@CoolIdeasDIY-qv1nz ❤🙏❤

[@garymitchell6897]

Tough on die to not break chips when threading

[@gado6438]

My tap set came with a handle.

[@jjm131]

기술이 많이부족합니다 더욱더 정진하세요

[@CoolIdeasDIY-qv1nz]

환영합니다, 친구.

[@PeterNetped]