How to fix your DStv decoder , faulty power supply , your DStv specialist ,repairs dstv

On this video I will show you how to fix your DStv decoder.
Make sure to Subscribe to my RUclips channel and click the notification bell so you are notified every time god bless.
multichoice south africa , how to install dstv in Johannesburg, the best signal of your DStv,have a good dstv cable in Johannesburg,dstv aircon media is your DStv specialist in Johannesburg, your can repair your DStv by yourself, for your DStv signal go to DStv and aircon media, is preferable to contact a accredited installer for your DStv repairs, a solution for a E48-32error no signal on your installation, you can have at Brixton Johannesburg your accredited installer, great to upgrade to DStv explora, we are your DStv local installer in Johannesburg, for all your DStv problems contact DStv and aircon media, the loss of DStv signal could be fix by yourself, we go the best of smart LNB for your installation, the damage of the LNB could be the your problem, do your extra view and extra point by yourself, DStv alignment can be useful for your installation, a new DStv decoder ultra will make a big difference on your installation . subscribe and share this video ,thanks for watching.
WhatsApp [phone] in Johannesburg
www.mrappliances.co.za/[e-mail]
• How to solve dstv E48-...
/ dstvandairconmediaalpha
don't forget to subscribe and like my video thanks god bless
www.mrappliances.co.za

[@vusimalinga7428]

You just saved me money today...I bought the power supply and it's working perfectly

[@dolphlets]

thank you very much you helped me i was about to buy a new decoder

[@ngounden]

Ur explanation was absolutely lovely I am going do exactly what you asked me to do and check my power supply thank u for ur enlightening information

[@prosperchewe2025]

Thanks dear, the Same problem I had with my decoder, you have saved my huge amount of money

[@fokoumedia]

Thanks for watching share the video

[@mzimz7329]

Thanks brother i just bought the power supply...i was about to buy a new decoder.

[@KhauheloMakoetlane]

Thank you so much you really help me a lot sir

[@AAMsiya]

Thank you very much my Decoder started flashing orange for a week i was even thinking of buying a new one. Iam definitely going to replace the transformer and see.

[@wandasenzo3570]

Thank you i have just diagnosed the problem and thanks so much for info that was helpful

[@Vivian-e1j]

Thanks man...so helpful

[@sizwekoomtheMc]

You just saved me trouble nd money, thank u very much, u do know your stuff.

[@biolaluv]

Thank u it was really helpful God bless u

[@onlinechonco9857]

Thank u so much. U just made it easy n crystal clear

[@Amazons_Kitchen]

Thank you
It was very helpful

[@seanmusona9408]

Thank you very much sir God bless you

[@lindiskosana6400]

Thank you so much I replaced the power supply and it works👌

[@francoisverdoes8552]

Thank you sir

[@mohamedpeer425]

Good work.

[@brianndhlovi5987]

Thanks alot I have just save my money

[@zuzilesidell9173]

Thank you for your help

[@doctordoc4505]

Thanks a lot my brother

[@doctordoc4505]

👍

[@ndaba9483]

Wow. All I did is to change the “transformer” and it work immediately.

[@mosesdumbs8230]

How about when the power supply lights but the decorder shows NO light.

[@Cactus2734]

Wow I can't believe it actually was the power supply... 😄 I had already contacted a technician and I'm certain he was gonn charge me top dollar!

[@michaelmalesela6354]

Thanks for the info 👍

[@olaoluwaadediran2085]

Thank you for the information. But what could be the problem,in a case the transformer is on but the decoder is not powered? That is,no light comes on except when you want to unplug it behind the decoder.

[@victorlaju6204]

Please how did you fix this one

[@sanelekhumalo9312]

Thanks Brother, as you say we grow up together step by step. Let us be.

[@osarenagharumeshach4437]

Thank you Mr Alphaso if I am correct for this power repair in decoder. But I need your help. I have startime decorder. It's power transformer or cable is directly attached to the decorder. How do I repair or replace it. Thank you sir

[@thecurs3dcreator589]

Thanks, man.

[@syathembathango6996]

Thank you so much.

[@vascopachirera303]

thnks bro, mine doesnt change to green or red it stays on orange. sometimes it works others it doesnt. could that be the power supply?

[@ckibankoana7056]

My decoder shows only green light but its not showing anything on the tv and i can't switch it off.....wht might be the problem?

[@abiodunoyewole946]

nice one, but i use the DSD1131, in my own case a red indicator on and keeps it constant when tried with my gotv adaptor the same but my gotv adaptor works fine

[@fokoumedia]

hi how powerful is your gotv adapter try the another on for dstv with 12v 2mp

[@thokomakhana6901]

Hi my dstv is the hd its fearing so should i buy a new one cause thought that its no longer working

[@nonhlanzekoximba3920]

Hi I have a dstv 6s HD decoder and it's not flashing only light but the charger is flashing red light

[@tendainyika1342]

Thank you very much, it worked

[@fokoumedia]

I believe this video has helped you to fix your dstv problem. support the channel with a like , subscribe ,share and comment below. Thanks and god bless.

[@gistlover1613]

Thanks so much for this video.. what could happen when the decoder stated requested for accurate of 220v before it can work? It will never work with any voltage less than 220v . Please advise 🙏🙏🙏

[@edwardaddy1918]

Can the HDMI port be changed

[@vincentvuyisile]

I am in south Africa Bloemfontein in the free state

[@miassouamanarick4769]

How to contact U I'm in Cape town my decoder doesn't show on tv but it show only red light

[@skotilembinda3527]

Hi, where can I get the power supply I'm from khayelitsha

[@KingAlly526]

What to do if the decorder doesn't turn on total but the light on the plug is on?

[@bomkazimatyeni2518]

Hi thanks you its helpful. My decoder shows two red lights doednt have that orange

[@buhlenkosi532]

Mine too but he doesn't explain rhat

[@vincentvuyisile]

Hi brother this is Vincent I need your help with my dstv HD model 4s that keeps on rebooting then does not load pictures what can I do to solve the problem

[@briankimm5641]

Hola. Explora model 2a is showing exclamation mark after lightning strike. What can i do.

[@jamesduke8482]

Same problem with the red exclamation mark, any luck yet?

[@vincentvuyisile]

Now and then i also get the message that my waiting for communication from the primary decoder i have set the signal to 1680 and and index 3 but still getting the same results .all my cables are checked and my primary is an explorer qnd and my secondary is a zapper .please help

[@abdulkarimsesay7543]

Thank you for your information but I have a problem with my explora model 2a just an exclamation ‼️ standby

[@abdulkarimsesay7543]

Please I need you to help me out I have small ideas in electronics

[@adeshinaadebowale9282]

How did you fix this?

[@adeshinaadebowale9282]

I ma currently having similar issue

[@AsherBarkaEmmanuel]

What if it goes to green for two seconds and it shows the DSTV logo after booting and then it reboot again this happens like a loop repeatedly I don't know why can you help with that please?

[@ntshingantshingas4519]

Good day yesterday I was trying to change channel but I mistaken press the sign search so my screen keep on saying Boot up in progress please wait it counts till 100% but doesn't show DSTV on screen and decoder showing red and green it changes...till now is doing the same thing

[@melustshuma5710]

Am at Roodepoort whre can i get the office i get DStv 1 pay 115 everymonth bt this month they said an owing 460 asking Wats going on

[@zeeclassbeauty8783]

Where can I buy the supplier

[@sassy9362]

My Decoder has an orange light immeadely I power it on what mind be the problem

[@marceljunioregondi5594]

Like the video, let me try getting a new power supply and see if I get back to viewing my channels with my family. Will let you know the out come.

[@marceljunioregondi5594]

Did work out had to buy a new decoder?

[@khutsomatjee630]

DSD 3U
The yellow light is steady, the green and red have been flashing for 12 hours. Any solution?

[@fokoumedia]

Check your power supply

[@beatricechakali7299]

my transformer isn't showing the red light....doe it mean i have to replace it?

[@dayoajayi3782]

My power supply transformer is not showing light at all, where can I buy another one

[@ikechukwuanyanwu2099]

Hi, I have a dstv type 45model, immediately I connect power cable, the red light comes on, but goes off immediately and never comes on, what's the possible problem with it?

[@macsentertainment8041]

Good day sir,my decoder is working,after watching it for an hour or so,the red light starts blinking and when the redlight is steady,the green light goes off and the decoder shuts down .What's the cause?

[@fokoumedia]

Hi Chek your power adapter it could be the power adapter

[@fokoumedia]

ruclips.net/p/PLGwnr3thgafkxgwuF5LunSJ2uvLmPXuyr

[@fakundyalivani9442]

Please help,my explora decoder with smart card doesn't power on,it only shows a red light like this in brackets ( ! )

[@FatimaIzabi]

Same problem with mine

[@LuvuyoNomaqhiza-dy7mm]

What if the decoder does not come on and the light on transformer is flashing

[@banigopreciouscharles402]

My DSTV is just showing a red light. How do I fix this?

[@banigopreciouscharles402]

@@WORLDASVILLAGE I just got a new power pack

[@nosiphomsomi4901]

We had a terrible storm 5 hours ago, all my appliances were off, the blue light is there but the actual decoder is just blank 😭😭
Please help me

[@nomsaprecious3792]

have the same problem, what did u do?

[@nosiphomsomi4901]

@@nomsaprecious3792 don't remember. It was 3 years ago. But I'm no longer using DStv

[@nolubabalomtshakazi1404]

Please I have an explorer as my main and a small decoder in my room suddenly the one in the room just went blank theres no colour at all the transformer signal is blue showing that its powered on

[@nolubabalomtshakazi1404]

Im sorted it was a transformer I pulled it out and plugged it again

[@fokoumedia]

Hi Check you lnb cable at the back of your small decoder you don't have the is20

[@yvonnemajake2478]

My brother please help me mine it has 3 lights but they are not blinking they are just still all of them what must I do please help

[@yvonnemajake2478]

I'm looking for solution you giving me a heart 🤔

[@mosesgwezere8705]

My dstv hd decoder only showing red light only

[@africanidentityrevealed4609]

When I plug mine it goes straight to yellow colour below envelope sign

[@banelembongisenimondlane7199]

Tanx but main is not showing the green and yellow itsi showing the red only

[@mantshiyengeveline5468]

What if it is not flashing(lights)

[@glennkumashie8064]

My dstv charger just blinks blue and can’t turn on

[@JustinCoetzee2]

My open view is stuck on the redligjt

[@lyndorhlongwa9244]

My is showing all the lights. They not blinking

[@cop1981-nh4os]

My power supply doesn't come with a light

[@zikhonazinathi9108]

How to fix an E143 error?

[@RooiPetrosMorake]

My decoder shows red light and doesn't show anything

[@shaunjacobs2970]

The decoder is showing three colors no picture

[@Joshboi-sq5cn]

My ditch keeps flashing on and ooff

[@davidivory8714]

My girlfriend decoder has no lights it may have be damaged by lightning

[@kellydavid4021]

How do i replace the harddisk of my dstv explorer 3a

[@mantshiyengeveline5468]

What if the lights do not flash

[@DimaSeabi-ho1sk]

mine is not even powering on at all

[@clementbenny]

My power Supply keeps Blowing . . . ?

[@fokoumedia]

ruclips.net/p/PLGwnr3thgafkxgwuF5LunSJ2uvLmPXuyr

[@mikenthei]

thank you so much

[@alexiustroskie9754]

Thanks💯