i snatched one of these. I liked it so much i also snatched the A1 and A2. im planning to to build the A2 into a modernized MG36 with an extended inner and outer barrel to 18" with a C drum mag. My gripes with the A3 is no ETU, semi only and stupidly small capacity included mag. Novritsch staff made a statement that this is how DMRs should be for ethical reasons, but they seem to have no ethical concerns with programable bi trigger on the A1 A2s. I further upgraded the A3 with a 18" inner and outter barrel bumped the fps to 480, resulting in 10inch grouping at 60m standing 6inch on a bipod.
The semi only design choice is likely due to many fields restricting full auto rifles to 350, and allowing semi only to go up to or just below what bolt actions are allowed. I have seen mechanical locks preventinb Full auto fire that can be easily removed by the user if the field allows a dmr to use full auto
furthermore is novritsch a austrian company with a big percentage of sells going to germany, in which full auto is completly prohibited for anything that shoots over 0.5 Joules except for military rifles. And as it is a DMR style gun, it won't hurt to cheap out on the manifacturing costs of a full auto option
@@marcusklein227 they’re not even cheaping out. They use the same components it’s just a software change on controller (the German A1/A2 have the same semi only config as the A3) Here in the UK it’s a 1J cap for full auto before it becomes classed as a firearm and needs a firearm license
@@daniwalmsley611 its a 1.3J (374fps on .20s) cap for full auto, the law concerning this was changed over around 5 years ago. the field safe limit for most UK sites is 1.14J (350fps on .20s)
@@therapscallion64753 sorry you're quite right, I'd misremembered the joule limit. It was originally going to be 1J ans then it was up'd to 1.3J. The 2.5J "limit" for semi only only affects storage and safety measures you must take. They don't reauire a firearms license until 16.27J (12 foot pounds to be more accureate)
Good rewiev but you didnt test it well. It perform excelent even further then 30 meters. Mine shot in 30cm by 30cm box from 80 meters with few upgrades. Also 0.30g bbs are joke for dmr. 50 € in upgrades and you have 1.9 J with 0.40g bbs and over 80 meters range. But yes, mag is shit with 19bbs in it.
I have this gun. It has excellent accuracy, holds well, looks great. The magazine for 20 bb is not enough, but it is possible to use a larger one. Longer range would be better. Not good for snipers, more for scouts and support.
The AEG sounds awful. You clearly hear the bad shimming of the gears. Aslo a big chunky stock but let´s put the battery in the handguard so it´s open to see and be hit by everyone. Seems and sounds like another cheap throw out by Novi like "his" Lancer SSR4 to make money. He had a good start with the SSG24, but every AS after this feels, seems, performs and sounds like some cheap throw outs to make money.
Regarding the Semi-only, novritsch is an austrian company with a big percentage of sells going to germany, in which full auto is completly prohibited for anything that shoots over 0.5 Joules except for military rifles. And as it is a DMR style gun, it won't hurt to cheap out on the manifacturing costs of a full auto option
No attempt to make it realistic, it's just a SL8 with a stylised top rail and forend. Could easily be made in RS. Would these rails and forend be available separately and would they fit an Ares G36. Das to sell all my ERG's and couldn't go back to regular AEG's, thought the blow bAck G36 a good cheap compromise.
ive been swapping parts, the novritsch handguard and carry handle are compatible with the TM and JG/Golden Eagle specs and vice versa. There was a minor fitting issue with the Novrutsch A1 classic handguard as the front end wasn't opened up during manufacturing to accomdate a mock gas piston. Solced it with some drilling.
You got the german version. The F in the Pentagon symbol next to the name gives it away. By german weapon law every air rifle above an energy of 0,5 Joule needs to wear that mark and can be semi-auto only in order to be legal.
They do anything. The guns not made by novbitsch. He just rebrands it. Like everything you can buy from the greedy austrian . But the design is a original hk design.
@@rolfstuh I suppose you meant they don't do anything. But what I meant was that angled top rail end and the mlok front end also with the angle, can't say I'm impressed. I also won't buy their P90, it's the same sh*t.
Nov products showing yet again why the AEGs have QC issues. Too screechy, accuracy is bad, distance is bad. His SSR90 had a plethora of issues and sadly the new SSR63 lineup is just the same.
I like the review, nice to see you guys doing those reviews. That being said, may I offer some pieces of advice on video-cutting and the pacing of the review, as well as what information to focus on? Firstly, I would advise to use creative video-cutting techniques. An example for this is showing the AEG in different looks/configurations. Firstly without optical sights, then with a red dot that has a magnifier and then with a lpvo(low power variable optic). The AEG gets held up all the time, but through cut the look of the rifle changes. This effect will look like a selection-screen in a Video game and it will be pretty cool. Also perfect to show different setups or colours that are available. As for the pacing, please plan beforehand. That way the review won´t have repetetive sections, and watching will be more enjoyable. Don´t repeat a fact, like mentioning the fact of the stock being heavy twice. Call it out once, and then wait until the conclusion and mention it with the other properties of the AEG to form an opinion. As for what information to focus on, some details like the safety-lever having an F without function is not important, just mention that the AEG is semi only. I would rather find out about the characteristics of the AEG in practical use while playing airsoft or plinking. This involves using heavier BBs, especially when this AEG has a hop-up chamber that works with heavier bbs then .2s . For chrono-tests it makes sense to have a comparision, but for accuracy use the heavier bbs please. Lastly, I get filming the AEGs in action usually involves multable AEGs being used at the same time, being filmed etc. Having different weight bbs for all of them at hand is difficult, I get this. But then atleast use somewhat fitting bbs, and not just .2s . However, I don´t want to just critique you, and me watching the videos shows that they are good. Or else I would not watch them. So maybe implement some of the points, don´t sweat it. It really is just some piece of advice. And thank you for the video.
Novritsch "Allow me to sing you the song of my people: yip yip yip yip yip" I just can't stand Nov, especially after his 'look at my DIY sniper rifle' video which was just the action of a rifle stuffed into a pvc pipe with a crude wooden stock; I can't stand fakers.
GBBR crowd always play one game and hang out in the staging area rest of the day to gloat about having a GBBR. Bruh chill we all know it’s ass compared to anything else.
i snatched one of these. I liked it so much i also snatched the A1 and A2.
im planning to to build the A2 into a modernized MG36 with an extended inner and outer barrel to 18" with a C drum mag.
My gripes with the A3 is no ETU, semi only and stupidly small capacity included mag. Novritsch staff made a statement that this is how DMRs should be for ethical reasons, but they seem to have no ethical concerns with programable bi trigger on the A1 A2s.
I further upgraded the A3 with a 18" inner and outter barrel bumped the fps to 480, resulting in 10inch grouping at 60m standing 6inch on a bipod.
The semi only design choice is likely due to many fields restricting full auto rifles to 350, and allowing semi only to go up to or just below what bolt actions are allowed.
I have seen mechanical locks preventinb Full auto fire that can be easily removed by the user if the field allows a dmr to use full auto
furthermore is novritsch a austrian company with a big percentage of sells going to germany, in which full auto is completly prohibited for anything that shoots over 0.5 Joules except for military rifles. And as it is a DMR style gun, it won't hurt to cheap out on the manifacturing costs of a full auto option
@@marcusklein227 they’re not even cheaping out. They use the same components it’s just a software change on controller (the German A1/A2 have the same semi only config as the A3)
Here in the UK it’s a 1J cap for full auto before it becomes classed as a firearm and needs a firearm license
@@daniwalmsley611 its a 1.3J (374fps on .20s) cap for full auto, the law concerning this was changed over around 5 years ago. the field safe limit for most UK sites is 1.14J (350fps on .20s)
@@therapscallion64753 sorry you're quite right, I'd misremembered the joule limit. It was originally going to be 1J ans then it was up'd to 1.3J.
The 2.5J "limit" for semi only only affects storage and safety measures you must take. They don't reauire a firearms license until 16.27J (12 foot pounds to be more accureate)
Good rewiev but you didnt test it well. It perform excelent even further then 30 meters. Mine shot in 30cm by 30cm box from 80 meters with few upgrades. Also 0.30g bbs are joke for dmr. 50 € in upgrades and you have 1.9 J with 0.40g bbs and over 80 meters range.
But yes, mag is shit with 19bbs in it.
What upgrades did you make to achieve this?
I have this gun. It has excellent accuracy, holds well, looks great.
The magazine for 20 bb is not enough, but it is possible to use a larger one. Longer range would be better. Not good for snipers, more for scouts and support.
Would you reccomend this gun for beginners ?
@@kingtrihx1904 if you play it, as a support, not a sniper, it's a really good weapon.
what mag can you put in this?
Can I ask you what larger mag are you using on it ? Any brand you're recommending to extend the capacity? Thank you 😁
@@el_rabbit3713 FOR ME, I was using magazines from CZ 805 Bren or G36.
When is the Novritsch SSR90 review? I would love to see it!
The AEG sounds awful. You clearly hear the bad shimming of the gears.
Aslo a big chunky stock but let´s put the battery in the handguard so it´s open to see and be hit by everyone.
Seems and sounds like another cheap throw out by Novi like "his" Lancer SSR4 to make money.
He had a good start with the SSG24, but every AS after this feels, seems, performs and sounds like some cheap throw outs to make money.
Big chunky stock with sadly no space in it, due to the adjustable end piece.
In my childhood I was have a spring bb gun like that - it was pump like a shotgun ! It was 1:1 scale and I thought - it was monster big for me !
Regarding the Semi-only, novritsch is an austrian company with a big percentage of sells going to germany, in which full auto is completly prohibited for anything that shoots over 0.5 Joules except for military rifles. And as it is a DMR style gun, it won't hurt to cheap out on the manifacturing costs of a full auto option
No attempt to make it realistic, it's just a SL8 with a stylised top rail and forend. Could easily be made in RS. Would these rails and forend be available separately and would they fit an Ares G36. Das to sell all my ERG's and couldn't go back to regular AEG's, thought the blow bAck G36 a good cheap compromise.
ive been swapping parts, the novritsch handguard and carry handle are compatible with the TM and JG/Golden Eagle specs and vice versa. There was a minor fitting issue with the Novrutsch A1 classic handguard as the front end wasn't opened up during manufacturing to accomdate a mock gas piston. Solced it with some drilling.
So 30m is DMR range?
It sounded like it's in need of a re-shim and change the distans of the motor.
I always loved the reviews by RWA always... buuuuuut 30 meters is not impressive stop the cap.
Accuracy test for this toy should be at least 40 m. Ideally 60-70 meters. Seriously!
You got the german version. The F in the Pentagon symbol next to the name gives it away. By german weapon law every air rifle above an energy of 0,5 Joule needs to wear that mark and can be semi-auto only in order to be legal.
Sounds painfully grindy and looks like they tried too hard to make it look futuristic. Not impressed.
They do anything. The guns not made by novbitsch. He just rebrands it. Like everything you can buy from the greedy austrian . But the design is a original hk design.
@@rolfstuh I suppose you meant they don't do anything. But what I meant was that angled top rail end and the mlok front end also with the angle, can't say I'm impressed. I also won't buy their P90, it's the same sh*t.
Nov products showing yet again why the AEGs have QC issues. Too screechy, accuracy is bad, distance is bad. His SSR90 had a plethora of issues and sadly the new SSR63 lineup is just the same.
I like the review, nice to see you guys doing those reviews.
That being said, may I offer some pieces of advice on video-cutting and the pacing of the review, as well as what information to focus on?
Firstly, I would advise to use creative video-cutting techniques.
An example for this is showing the AEG in different looks/configurations.
Firstly without optical sights, then with a red dot that has a magnifier and then with a lpvo(low power variable optic).
The AEG gets held up all the time, but through cut the look of the rifle changes.
This effect will look like a selection-screen in a Video game and it will be pretty cool.
Also perfect to show different setups or colours that are available.
As for the pacing, please plan beforehand.
That way the review won´t have repetetive sections, and watching will be more enjoyable.
Don´t repeat a fact, like mentioning the fact of the stock being heavy twice.
Call it out once, and then wait until the conclusion and mention it with the other properties of the AEG to form an opinion.
As for what information to focus on, some details like the safety-lever having an F without function is not important, just mention that the AEG is semi only.
I would rather find out about the characteristics of the AEG in practical use while playing airsoft or plinking.
This involves using heavier BBs, especially when this AEG has a hop-up chamber that works with heavier bbs then .2s .
For chrono-tests it makes sense to have a comparision, but for accuracy use the heavier bbs please.
Lastly, I get filming the AEGs in action usually involves multable AEGs being used at the same time, being filmed etc.
Having different weight bbs for all of them at hand is difficult, I get this.
But then atleast use somewhat fitting bbs, and not just .2s .
However, I don´t want to just critique you, and me watching the videos shows that they are good.
Or else I would not watch them.
So maybe implement some of the points, don´t sweat it.
It really is just some piece of advice.
And thank you for the video.
damn bro this is an essay
wtf happened to arclight and tim
You came out of a time machine and the first thing you did was watch a Redwolf video?
@@aaron4820 LOL
But it doesn't have a speaker that goes Pew-Pew-Pew-Pew.
It sounds like such a cheap AEG
Cheaper the AEG, better the margins.
Are y'all South African?
Novritsch "Allow me to sing you the song of my people: yip yip yip yip yip"
I just can't stand Nov, especially after his 'look at my DIY sniper rifle' video which was just the action of a rifle stuffed into a pvc pipe with a crude wooden stock; I can't stand fakers.
should have been a gbbr
GBBR crowd always play one game and hang out in the staging area rest of the day to gloat about having a GBBR. Bruh chill we all know it’s ass compared to anything else.
2発装弾とか35mでホップ効かないとかダメな銃だね。
10年以上前に買った僕のKWAのは50mでもA4のターゲット当たるよ。
もともとKRYTACはホップアップに問題を抱えてるメーカーだからこれが限界なのかもね。
Not impressed