Was soll man dazu sagen?! Einfach großartig!!! Finde die Art und Weise wie du die Dinge angehst sehr inspirierend. Danke für die tollen Videos. Pass auf deine Finger auf!
Cosmas, You've done it again! This is absolutely brilliant!! I wish you had done this video ages ago. As I spent yonks looking for a decent video on how to make one as simple as this and make it "so simply" Great job dude and as always, I love your video editing style. It's straight to the point with no messing. Good work. I may need to pick your brains about what would be the best way to solve some workshop problems. As you clearly demonstrate a clear and clean perspective in making something work right. Thanks Cosmas. Look forward to the next project. :)
Cosmas, this is very well done indeed...if I had something like this where I work, we could easily clean up tracked-in sand in our buildings that gets everywhere!
excellent video! I am planning on building one myself for the new year! Just please tell me the diameter of the pvc pipes. the large one is 200mm and the smaller? thanks!
Agree with others who have said your solution to sanding the inlet to the inside circumference is great! How much testing did you do to identify the best position (both vertically and opposing inlet) to the suctioning vertical tube? Perhaps you could do a follow up explains that? Thanks for sharing.
Excellent build! Probably the best dustextractor I found until now. Did you test if there is any difference when the gap between the baffle goes completely around or when it's partly closed (thien-baffle)? Thanks a lot for sharing!
Beautifully done. Can i ask you what is the blue metalic recipient that you use to base this proyect? I live in Argentina, and i never see a container like that, so if you tell me what is it, I may found something to replace it. Thanks!
And one more question, Cosmas. Does the vacuum loose sucksion capacity with this cyclone? And if it does, is significant? Thanks man, I really love your vids!
with all the work that went into this you end up using electric vacuum, why did you not use air power from compressor? You purchased a vacuum to run this, air is cheaper.
I learned long time ago the my showing you how to do something would be a waste of my time. You have shown that your ego is nowhere near capable of handling such a thing. I do not have the room for a big vac in my tiny shop, I build with the least amount of power tools a 10 x 20 garage can handle.
Gary Finger Tough story bro. I know it's not easy. But you're right, my ego really wouln't be capable to withstand such greatness. So please, don't show me the light...
hi, werde mir auch so ein Teil bauen. Benutze aber das was mir zur Verfügung steht (kostenlos am besten). Du hast mich angesteckt mit Deiner eloquenten Art zu arbeiten. Eine technische Frage habe ich noch: Macht es einen Unterschied, ob das angesaugte Material, so wie bei Dir von AUSSEN an die Trommelwand gesaugt wird, oder kann man das Rohr durch den Deckel einführen, so dass das Material von INNEN an die Wand der Trommel geschleudert wird???
Schön wenn dir das video was gebracht hat! Hmm ich weiß jetz nicht genau wie du das meinst. Lies dir am besten den Wikipedia Artikel zu Fliehkraftabscheidern durch dann weißt du ob das was du machen willst funktionieren würde.
Was ist der Sinn von der Erweiterung? Ein kleiner Tipp: Anstatt das gesamte mit epoxytharz abzudichten verwendet man eine statische Dichtung wie einen O-Ring. Das bewegliche Rohr bleibt dann Fest, sonst gibt es einen Druckverlust.
Vorabscheider damit sich der Filter nicht zusetzt. Das bewegliche Rohr ist mit garnichts abgedichtet sonst wäre es ja nicht mehr beweglich. Es sitzt nur stramm in dem Loch
Inspiriert von Deinem Video habe ich mir auch so einen Zyklonabscheider gebaut, nur halt ohne Sichtfenster. Er funktioniert recht gut und etwa 90% der Sägespäne und des Staubs landen im Sammelbehälter statt im Werkstattsauger. Spielt es in dem Zusammenhang eine Rolle, in welche Richtung die Öffnung des senkrechten Rohres in Bezug auf den seitlichen Rohranschluss zeigt (im Video zu sehen bei 7:30)?
Ja, die Öffnung sollte vom einströmenden Gas abgewendet sein. Der Wirkungsgrad sollte deutlich besser als 90% sein. In diesem Video ist es besser zu sehen ruclips.net/video/eWPk2MmJyc8/видео.html
I need some help am building a system like this with a 250w 350m3/hour motor with 100mm input duct and I can't get 100mm duct tube here, only 90mm or 110mm, should I do the duct with 110mm tube or 90mm tube ? I'm thinking maybe the 110mm tube with a 90mm short tube on the end where it vacuums the dust from the cnc machine might be the best choice, can someone please advise ?
Kannst du auch mal bitte zeigen wie du an einem Problem 5 Minuten grübelst? ;)) Ne Quatsch, hab einen heiden Respekt vor der Routine die du beim werkeln offensichtlich hast! Noch ne kleine Frage vom Laien: Hätte die Bandsäge den Holzkant nicht gepackt oder hast du wegen dem sauberen Abschluss die Kreissäge genommen?
grüne Schlappen Nein ich hasse es wenn Leute das tun. Voll verschwendete zeit. oder wenn sie sich beim warten filem noch schlimer :D Ja genau deswegen die Kreissäge.
sehr gutes Video !!! nur eine Frage, wo hast Du diesen schönen verschießbaren Eimer her ? Ich such nach sowas schon ne ganze Zeit, konnte aber nichts finden.
Hi Cosmos. Thanks for the build video. Im trying to understand why the inlet and outlet are at the same height? what if the inlet was below the baffle plate? Would this stop even more bits getting past the cyclone? Or would this not work?
Nice, I have the same router. Gab´s glaub ich damals bei Lidl oder Aldi? Thinking about building a routertable for some time now. Nice build! So von deutsch zu deutsch :-)
Hey echt super das Teil ich hab auch genau den gleichen Staubsauger. Eine kleine Stückliste nur für den Vac wäre echt cool zb. welcher Durchmesser hat das KG-Rohr? Gruss René
Ich weiß es nicht auswendig aber diese Rohre sind überall gleich. Ist ein Abflussrohr glaub ich. Was ich für teile verbaut habe siehst du ja im Video. Ob du den Zyklon nun ein bisschen höher oder flacher machst ist für die Funktion egal. Viel spaß beim bauen :)
A master piece thank you for sharing it's Brilliant... I just found your channel and I am looking forward to going through more of your video's. Carry On =O)
Really compact - great job, I really like how you did the inlet.
Thanks John!
Cosmas B
Have you tried it on water yet? You did an Excellent job with the one man army skill of editing, machining. Beautiful finished product.
bondingslick
No, not yet. But I have the suspicion that that will not work very well.
Thanks for the kind words! :)
Your solution to the problem of constructing the tangent connection from the inlet to the cylinder is the best one I've seen, yet.
Nicely done.
Frank
franksalterego 99
As John said, it's much more elegant and compact than having 3' of inverted cone sticking up on the top of a plastic bucket...
Thanks for sharing.
Поставил плюс за профессионализм и наличие инструмента. Хорошо работаешь. Респект и уважуха!!!
This is one build I'm going to be tackling!
Thanks!
wow this is EXACTLY what I need. Thank you for sharing the video, great build!
Was soll man dazu sagen?! Einfach großartig!!! Finde die Art und Weise wie du die Dinge angehst sehr inspirierend. Danke für die tollen Videos. Pass auf deine Finger auf!
Oh danke für das Lob :) ja klar, bleibt hoffentlich alles dran ^^
Cosmas, You've done it again! This is absolutely brilliant!! I wish you had done this video ages ago. As I spent yonks looking for a decent video on how to make one as simple as this and make it "so simply" Great job dude and as always, I love your video editing style. It's straight to the point with no messing. Good work. I may need to pick your brains about what would be the best way to solve some workshop problems. As you clearly demonstrate a clear and clean perspective in making something work right.
Thanks Cosmas. Look forward to the next project. :)
Best one I've seen yet. I think I'll copy this one. Thanks.
Glad you like it!
I surprised myself by becoming interested in vacuum cleaning...Great video!
The same goes for me. Never thought I'd one time get into cacuuming ;)
Very nice and it works great.Thanks for sharing your video.
Хорошо сделано!
Компактно!
Magnífica idea, cuando tenga tiempo voy hacerme uno, gracias por compartir tus conocimientos.
Un saludo
Such precision! Amazing!
Very good video - I like the pace, great job.
Awesome work, thanks for sharing!
Great video! Thanks for sharing.
Cosmas, this is very well done indeed...if I had something like this where I work, we could easily clean up tracked-in sand in our buildings that gets everywhere!
excellent video! I am planning on building one myself for the new year! Just please tell me the diameter of the pvc pipes. the large one is 200mm and the smaller? thanks!
Thanks! 50mm
Jesteś niesamowity. Skąd bierzesztakie pomysły! Gratulacje! ;-)
thanks for this tutorial. What do you think if you compare to your orange road cone version?
Agree with others who have said your solution to sanding the inlet to the inside circumference is great! How much testing did you do to identify the best position (both vertically and opposing inlet) to the suctioning vertical tube? Perhaps you could do a follow up explains that? Thanks for sharing.
None. I just made it so that the baffle is level with the lid of the bucket. And it works really well.
Excellent build! Probably the best dustextractor I found until now. Did you test if there is any difference when the gap between the baffle goes completely around or when it's partly closed (thien-baffle)?
Thanks a lot for sharing!
16 dislikes....unbelievable
beautiful work
Very good and small system. Thanks.
Beautifully done. Can i ask you what is the blue metalic recipient that you use to base this proyect? I live in Argentina, and i never see a container like that, so if you tell me what is it, I may found something to replace it. Thanks!
And one more question, Cosmas. Does the vacuum loose sucksion capacity with this cyclone? And if it does, is significant? Thanks man, I really love your vids!
TheLaoruga
Thanks :)
The vac loses a little bit of suction but it is not noticable. The blue container is a barrel made out of sheet metal.
with all the work that went into this you end up using electric vacuum, why did you not use air power from compressor? You purchased a vacuum to run this, air is cheaper.
You could make a video and show us how you do that. That would be awesome :)
I learned long time ago the my showing you how to do something would be a waste of my time. You have shown that your ego is nowhere near capable of handling such a thing. I do not have the room for a big vac in my tiny shop, I build with the least amount of power tools a 10 x 20 garage can handle.
Gary Finger Tough story bro. I know it's not easy. But you're right, my ego really wouln't be capable to withstand such greatness. So please, don't show me the light...
If you don't want the plastic to melt like that as you cut it, stick paper to it with glue stick. Peel or wash the paper off after.
hi, werde mir auch so ein Teil bauen. Benutze aber das was mir zur Verfügung steht (kostenlos am besten).
Du hast mich angesteckt mit Deiner eloquenten Art zu arbeiten.
Eine technische Frage habe ich noch:
Macht es einen Unterschied, ob das angesaugte Material, so wie bei Dir von AUSSEN an die Trommelwand gesaugt wird, oder kann man das Rohr durch den Deckel einführen, so dass das Material von INNEN an die Wand der Trommel geschleudert wird???
Schön wenn dir das video was gebracht hat!
Hmm ich weiß jetz nicht genau wie du das meinst. Lies dir am besten den Wikipedia Artikel zu Fliehkraftabscheidern durch dann weißt du ob das was du machen willst funktionieren würde.
Was ist der Sinn von der Erweiterung? Ein kleiner Tipp: Anstatt das gesamte mit epoxytharz abzudichten verwendet man eine statische Dichtung wie einen O-Ring. Das bewegliche Rohr bleibt dann Fest, sonst gibt es einen Druckverlust.
Vorabscheider damit sich der Filter nicht zusetzt. Das bewegliche Rohr ist mit garnichts abgedichtet sonst wäre es ja nicht mehr beweglich. Es sitzt nur stramm in dem Loch
Inspiriert von Deinem Video habe ich mir auch so einen Zyklonabscheider gebaut, nur halt ohne Sichtfenster. Er funktioniert recht gut und etwa 90% der Sägespäne und des Staubs landen im Sammelbehälter statt im Werkstattsauger. Spielt es in dem Zusammenhang eine Rolle, in welche Richtung die Öffnung des senkrechten Rohres in Bezug auf den seitlichen Rohranschluss zeigt (im Video zu sehen bei 7:30)?
Ja, die Öffnung sollte vom einströmenden Gas abgewendet sein. Der Wirkungsgrad sollte deutlich besser als 90% sein.
In diesem Video ist es besser zu sehen ruclips.net/video/eWPk2MmJyc8/видео.html
+Cosmas B Okay, vielen Dank für die schnelle Antwort. Mit 90% war ich schon recht zufrieden im Vergleich zur Situation vorher ohne Zyklonabscheider.
I need some help am building a system like this with a 250w 350m3/hour motor with 100mm input duct and I can't get 100mm duct tube here, only 90mm or 110mm, should I do the duct with 110mm tube or 90mm tube ?
I'm thinking maybe the 110mm tube with a 90mm short tube on the end where it vacuums the dust from the cnc machine might be the best choice, can someone please advise ?
Kannst du auch mal bitte zeigen wie du an einem Problem 5 Minuten grübelst? ;))
Ne Quatsch, hab einen heiden Respekt vor der Routine die du beim werkeln offensichtlich hast! Noch ne kleine Frage vom Laien: Hätte die Bandsäge den Holzkant nicht gepackt oder hast du wegen dem sauberen Abschluss die Kreissäge genommen?
grüne Schlappen Nein ich hasse es wenn Leute das tun. Voll verschwendete zeit. oder wenn sie sich beim warten filem noch schlimer :D
Ja genau deswegen die Kreissäge.
sehr gutes Video !!!
nur eine Frage, wo hast Du diesen schönen verschießbaren Eimer her ?
Ich such nach sowas schon ne ganze Zeit, konnte aber nichts finden.
Hab mir ein par solche Eimer auf ebay gekauft.
Schau mal unter die Bezeichnung "Spundfässer "nach.
Hallo, super arbeit ,eine Frage, Bleibt der Beutel in dem Staubsauger?
Danke! Ja der bleibt drin.
Hi Cosmos. Thanks for the build video. Im trying to understand why the inlet and outlet are at the same height? what if the inlet was below the baffle plate? Would this stop even more bits getting past the cyclone? Or would this not work?
That would not work. Maybe you should watch a video about how cyclones work. There are some really good ones out there :)
Great. Very useful. I was building. Thanks for the tips. What diameter pipe ?. (200mm?)
spiner58 Yes, the diameter is 200mm.
very nice, thanks !
Nice, I have the same router. Gab´s glaub ich damals bei Lidl oder Aldi?
Thinking about building a routertable for some time now. Nice build! So von deutsch zu deutsch :-)
Ja das kann sein. Ist so ein noname Billigteil, funktioniert aber ganz ordentlich. Ein frästisch ist eine gute Idee ;)
Hey echt super das Teil ich hab auch genau den gleichen Staubsauger.
Eine kleine Stückliste nur für den Vac wäre echt cool zb. welcher Durchmesser hat das KG-Rohr?
Gruss René
Ich weiß es nicht auswendig aber diese Rohre sind überall gleich. Ist ein Abflussrohr glaub ich. Was ich für teile verbaut habe siehst du ja im Video. Ob du den Zyklon nun ein bisschen höher oder flacher machst ist für die Funktion egal.
Viel spaß beim bauen :)
А какой диаметр трубы самого циклона?(160мм)?
200mm
Great video...
Podrías mandarme los planos del material . Gracias y un saludo de José daniel
très bien
発想が素晴らしいですね、材料が手に入りにし、工具がなくては制作出来ません、慣れた手つきでしていますね、作るとしますと幾らぐらいかかりますかりますか、又連絡ください。
A master piece thank you for sharing it's Brilliant... I just found your channel and I am looking forward to going through more of your video's. Carry On =O)
Thanks ;)
Powerful ability! Perfectly Admire you ! ^^
major skills
HI, danke fürs Video, aber 15€? Alleine ein 30L Spundfass kostet schon ca 30€.
Aber gut, man kann ja auch was anderes nehmen....
Ich hab mir einige dieser Eimer auf ebay für je 5€ geholt.
Cosmas B
Regulär kosten die halt mehr, dann haste eben mal Glück gehabt :D
Vik Ge
Tja, dann hab ich eben glück gehabt
Like a Pro!
нармульная такая штука себе такую обязательно замучу
Diresta approves
Наглядное пособие: как инструментом на 50.000 сделать циклон за 1.000.
Genau zu rechten Zeit. Hab vor einen zu bauen. Etwas mehr Angaben über Dimensionen wär schön. Aber es sollte genügen. Danke. Weiter so
Wozu? du musst meines ja nicht auf den Millimeter genau kopieren.
super!!!! 5++++