Nissan Qashqai Wiper Linkage Mechanism Fix

Поделиться
HTML-код
  • Опубликовано: 6 сен 2024
  • Qashqai Wiper Linkage Mechanism Fix. Wipers stopped working altogether? Wipers arms gone floppy? Take a look at this fix using a simple metal clip.
    Items used in this video - Metal Linkage Clip amzn.to/32x47LO Puller amzn.to/3fH5hbf
    WARNING:
    This video is intended for entertainment purposes only and is not an instructional video of how to do something. You should always seek the advice of experts. If you use the information from the video you are fully responsible for the outcome.

Комментарии • 22

  • @alftupper3730
    @alftupper3730 3 года назад +1

    Thank you for this lovely clear video which exactly showed the problem when wipers stopped on my 09 plate qashqai. I bought the retaining clip online for £5.50 and all done. Top man, thanks again.

    • @fiveminuteman
      @fiveminuteman  3 года назад

      Glad it helped. Not long after i fitted the clip the motor itself packed up and had to replace one of those.

    • @ianknott788
      @ianknott788 3 года назад

      Can I ask which clip you bought please?

    • @ianknott788
      @ianknott788 3 года назад +1

      Can I ask which clip you bought please?

    • @fiveminuteman
      @fiveminuteman  3 года назад

      @@ianknott788 Amazon dont stock the ones i used in the link, best bet to search ebay for qashqai wiper arm clip

    • @ianknott788
      @ianknott788 3 года назад

      @@fiveminuteman thanks mate👍

  • @kebromdrive839
    @kebromdrive839 3 года назад +1

    hii i have a Nissan Qashqai 2010 modell and i have problem with this car only working fast . What happened with athers and what can i do ?

  • @datatest1555
    @datatest1555 2 года назад +1

    That linkage clip is no longer available from Amazon, will universal, c-shaped ones work?

    • @fiveminuteman
      @fiveminuteman  2 года назад

      Not sure if will, have a look at ebay and see what they have.

  • @welshdragon2008
    @welshdragon2008 3 года назад +2

    My car same as yours. But when I replaced my motor my wipers work but when they stop, they are in the upright position. What happened?

    • @fiveminuteman
      @fiveminuteman  3 года назад +1

      If they stop in upright position sounds like you need to take them off when in that position and place them back horizontal. Sounds like you removed them from an upright position then put them horizontal. Give it a g o.

    • @ntandazosogoni6952
      @ntandazosogoni6952 3 года назад +1

      It means upright is the rest position, kids played with the switch while you were not looking . Put them off and pull them out of the upright position and place them in the horizontal.

  • @larchielad
    @larchielad Год назад +1

    Do i def need the removal tool or is there another way to take wiper arm off?

    • @fiveminuteman
      @fiveminuteman  Год назад

      Tap with a hammer, make sure you leave the nut on the end of the thread. Tool makes easier and less likely to break anything.

    • @larchielad
      @larchielad Год назад

      @@fiveminuteman thanks, think ill buy the tool so

    • @larchielad
      @larchielad Год назад

      Motor came today, cant get wipers into the up position as motor thats on car has nothin left in it to move them at all, also tried pulling them up while wiper set to on. So cant get puller on properly to remove wiper

  • @ianknott788
    @ianknott788 3 года назад

    Where can I buy the clip from, mine is a 2010 qashqai.? Thanks.

  • @robby_boy9604
    @robby_boy9604 3 года назад +1

    Do you have a link for the clip you used in this video??

    • @fiveminuteman
      @fiveminuteman  3 года назад

      Should be in the description

    • @fiveminuteman
      @fiveminuteman  3 года назад

      Items used in this video - Metal Linkage Clip amzn.to/32x47LO Puller amzn.to/3fH5hbf

  • @Lennie07
    @Lennie07 3 года назад

    What grease did you use ? The one I have is not good with rubber.