Genius Boy Restores V-8 C11 Truck Engine // The Genius Restored 8 Of The World's Most Giant Machines
HTML-код
- Опубликовано: 1 дек 2023
- Genius Boy Restores V 8 C11 Truck Engine // The Genius Restored 8 Of The World's Most Giant Machines
► Contact Me: wtgroupvn@gmail.com
Thanks for watching, LIKE, Subscribe & Share!
► Subscribe to channel: bit.ly/3mG3rQi
►Restorations Tools: bit.ly/3J5CVHS
© Copyright by Restorations Tools
I hope you find something useful and enjoy this movie! I am pleased with your feedback, advice and suggestions for improvement.
I have been doing that for 50 years. You just made great boat anchor. Good job.
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤
absolutely savage sending those rod caps home with the impact
several machnist values ignored.. no mic on the crank, or polish..just slap some standard size bearing in and run it. I noticed the water pump weep hole was busy too.. they simply put the old pump back on. used oil.😅 good old 90 degree v8 anyway.
يالله اللهم صل على محمد وآل محمد وعجل فرجهم ياكريم ❤❤❤
i like all of the unfiltered black oil with all of the unknown debris from the last engine to have had it going into the sump, makes it all worth while building it back up, i 'll give it about 1 year before somethink major goes wrong.
There's already something majorly wrong with it with that cylinder misfire going on!
Love the rebar chisel 👍
Exelente trabajo 👏👌 saludos desde El Salvador 🇸🇻 .
Grand master of these restoration continues to make awesome work always... Keep it up and impress everyone..🙏🙏♥️♥️🇷🇴
Przepięknie jest ten silniczek od remontowany od nie wiadomo czego ale nigdy drodzy panowie się starego czarnego wyleniałego oleju się nie wlewa do silnika świeżego po remoncie tylko nowy się oleju wlewa pozdrawiam serdecznie. 👍👍👍👍👍👍👍👍👍
They probably used old oil to test it then drained that and added new oil. I have done that many times.
ponadto prędkość nie jest regularna, należy sprawdzić regulację wtryskiwaczy
@@hasfrihasfri1642 Kopci na jednym garze. Może zawór nie trzymać.
job well done, the dismantling and installation of the engine taught me a lot about mechanics & being a student it meant a lot....💥💣👌
Hope you don't mind me be critical boys What you should be doing is using a torque wrench? for the cylinder head. crankshaft. And the Conrods on the Pistons. hope you don't mind me saying but I've done thousands of engines in my life.
WOW
This engine will not live another year...... No torque wrench.... wrong order in unscrewin and screwing the head, surfacing the head. The high pressure pump is controlled, and new cylinderlinings, thats all.....
0:24 вы тоже на заднем плане видите ямз 238 ???
This engine comes from Mitsubishi Fuso 8DC9 V8
Хороший ремонт. Отвезите туда где взяли. Теперь там нет песка.😂
I don't doubt the personability about knowing about engines but seems like delivery works on it. The more clean saying appears
Don't know how that motor got so dirty. What's that in a marine engine? It fell into the ocean got sand through it. What the heck sure it's spotless on the outside beautiful on the outside.
Shouldn't the bolts securing the main journals of the crankshaft and cylinder head be replaced with new ones, they are disposable?
Muy buen trabajo amigo y saludos para todos desde Miami FL estados unidos 🇺🇸 🙋
Muy bonito video de relaja uno viéndolo hasta el final gracias a este canal que hace posible disfrutar los conocimientos de gente inteligente saludos desde Los Girasoles Municipio de Charo Michoacán México
So many of these genius rebuilds have been submerged for years in salt water of fresh water. These guys are novices. Nothing that works as hard as an 8 cylinder diesel engine can be reassembled without a torque wrench.
Eu realmente fiquei muito surpreso de colocarem bronzinas e camisa novas, meus parabéns 👏👏
Apakah ini mesin mitsubishi 8 DC 9 ?
Inte alls bra den går på 7 cylindrar avgasvenil på hö sida
Quy tắc khi căng chỉnh máy chạy ngọt êm hay ko, đừng nên lắp bô trước, nếu trong 8 máy có 1 hoặc 2 máy pet bị chết hoặc ko phun sương, ra khói trắng, nếu lắp bô vào như thế thì biết máy nào có vấn đề
Hammer mechanic 😂😂😅
Yeah, which is a POOR mechanic!!
Момент затяжки? Почему не соблюдаете?
Wow Gracias 🥰🥰🥰🥰🥰🤜🤛💯
Awesome and outstanding.Thanks for sharing and taking us along
im surprised how you restored it with only a few tools. but you didnt use the torque wrench. all those bolts needs to be in the right torque otherwise it wont last.
right on, this clown just wants to be a you tube star.
They got the torque in the wrist.never fail’s.i know people like that.
@@ramiroescamilla7263 NAA ESO ES.MENTIRA
@@ramiroescamilla7263 my uncle is the most famous mechanic in our city and he still uses the torgue wrench. its impossible not to use it and repair a motor.
Common sense prevails!
Покрасили хорошо. Распредвал с кавернами, коленвал с бороздами - не померили и не отполировали хотя бы. При запуске вода бежит струйками из стыков, а из фильтров капает солярка. Зато покрасили хорошо и от песка почистили, новые гильзы поставили...... Трудно судить по их возможностям, но раз так делают, значит у них такой ремонт востребован.
They sent 1 or 2 injectors damaged on the smoke producing side.
Senekmeser
Does lubricant oil pollute the environment and affect the water circuit we are using?
Parabéns ótimo trabalho
there are 3 valves per cylinder. What is the little valve for? EGR? Compression release?
Un cilindro esta fallando 😮
I seems 1 valve intake is leaking. The side from the white smoke.
@@pic9375 They probably didn't set the valve clearances after the hokey ass valve job and didn't tend to the compression release valves.
Mitsubishi 8DC11 with jake brake valve, but the jakes is removed
TICS cable on injection pump
Hello my friend, your work is very interesting 👍🌹🌹🌺🌸🌷👉👉
Buen trabajo, saludos.
เยี่ยมมาก! ยินดีด้วย
Yeī̀ym māk! Yindī d̂wy
BRAZIL.
Not a master Mechanic . We didn’t see a torque wrench being used . Didn’t see the valve adjustment. I wouldn’t trust there workmanship ether.
Fuso 8dc11?
Thợ máy trường sơn
Cối cam mòn bị sét do để lâu mà ko làm mới lại, máy chạy ko êm
Ese motor tiene algo mal.
Primero no usaron una llave dinamometrica para apretar los tornillos y segundo hay un inyector fallando y usar aceite viejo no es bueno mucho carbon tiene
Có 1 máy trống gió ko nổ chỉ chạy được 7 máy thoi
Truck Engine? That Looks like a marine engine with sand in the water coolers for the heads....or maybe I'm wrong? But still I really enjoy these types of videos!
there is rust in the cylinders, it is possible that the engine is drowned
The title said genius boy😂😂
Shows washing engine parts
Các bạn đúng là dân chuyên xin góp ý với những máy lớn công xuất như thế này bạn nghiên cứu mua thêm 1 cần xiết ốc có đồng hồ Kg/psi cho những con bù lon nằm tại những chỗ chịu lực nhiều như nắp cu lát (động cơ) theo tôi đã thấy 1 tổ thợ đại tu 1 động cơ có 135 cv thôi
Lleva gorra del Vietcom q le de like Ho Chi ming.😂
Really it ok
Seriously you folks need to learn how to use a torque wrench.
No torque wrenches used here, maybe 6 mths before this breaks down ,
Beatiful 👍🏻
Mitsubishi??
What kind of of engine is this I know the description says c11 but I've never seen a c11 v8 with mechanical injection pump maybe 3208 or something but ç series are electronic
In which country this wonder is happening ? And who are these genius people ?
Nobody there is a genius, that's for sure!!
👏👏👍👍👌👌
Needs two big turbochargers 😊😊😊
Witam, pompa wtryskowa tak jakby niedomagała
درود بر شما دوست عزیز؟ آیا این موتور میتسوبیشی هست؟؟ خیلی کنجکاو شدم در مورد نوع مارک موتور؟؟ شما از کدام کشور هستید دوست عزیز ❤❤❤❤❤😂😂😂😂😂
Real talent 👏
NOT!!!! The kid is a DOOFUS Mc GOOFUS!!
Misfire and smoking. Broken rings?
No one else seems to have noticed its missing. 😂
I think cylinder 7 left the chat 😂😂😂
No tedy vážení, co jste to tomu motoru provedli...chod motoru je ve vyšších otáčkách hrozný... nepravidelný, hádá se...z jedné řady válců se kouří, po chvíli běhu se kouří dokonce i z nalévacího hrdla oleje...no a ten vyjetý olej do motoru po repasi...pánové...😳 barva sice pěkná, ale jinak nic...
They finished off the engine, which could still be restored.....
That looks like the old end864 mack engine
Is that insect or rodent debris in the intakes?
Sand.
Dont run it without antifreeze too long. May cook it
You should never adjust bolts with an impact screwdriver....
Oh really? I'll let all the mechanics I learned from know and I'll pass it along to my trade school teachers too right after I show them this uninformed comment...
@@Zedd2087 Dear friend, I'm sorry you wasted your time and money at your crappy trade school. You should be more humble due to your limited knowledge.
See you working on 2 engines. Account foreheads once full of clean sand where has a little bit?
Главное хорошо покрасить ,остальное херня.
Hello my friend, your work is very interesting. This engine is beautiful, it has been overhauled for a while
👌
Idles fine but not at higher rpms. Good job though
No, it was a LOUSY job!! Didn't you see the smoke on the right bank of the engine and hear the compression leak and how badly it ran?!?!
What vehicle is this engine from?
Nissan micra
wery ha ha :)))
Awesome 🦾
Genius? Hardly more like barely adequate. No measuring clearances, no proper torqing of any bolt. If it lasts a month I'd be surprised.
Супер 👍👍👍👍🔥🔥🔥🔥🔥🔥👏👏👏👍👏👍👏👏👏
Still smoking 😂😂😂poorly job
All that oily things on the ground, WITHOUT an oil seperator....wow, u destroy OUR planet ^^
fantastic job you are a magic man your work is top notch brilliant keep up the great work very well done thanks for sharing
Evidently, you don't know very much, if anything, about engines. That was one of the worst rebuild videos that I have ever seen!!
Is this a video on how not to rebuild a diesel engine????
If it works it works 😂
Yes!! That is what I was thinking! They did more things wrong than right!!
Si y que también tenga muchas perdidas de agua, aceite y combustible 😂😂😂😂
Grand master of these restoration continues to make awesome work always... Keep it up and impress everyone..🙏🙏♥️♥️🇷🇴