Datsun 240Z Restoration - Final Bodywork Stages (Part 3)

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 7 тыс.

  • @mymechanics
    @mymechanics  Год назад +2365

    Thank you very much for all your support! It's a joy to see that you guys really like this car restoration series.
    It's a very long journey, much more work than I could have ever imagined. I was working on the bodywork for over 110 days now, starting in June.
    If you would like to support my work more, you can join my Patreon at patreon.com/mymechanics
    To give you something back, I'm uploading daily vlogs out of the workshop along with longer, more detailled versions of the RUclips videos.

    • @MrLunithy
      @MrLunithy Год назад +19

      Thank you for the teachings .

    • @ineedspicyfood6427
      @ineedspicyfood6427 Год назад +34

      Where did you learn how to do all of this???

    • @JP-Lean6SigmaOps
      @JP-Lean6SigmaOps Год назад +33

      It's like Christmas came early this year!!! Keep up the good work, we are all so impressed with the intense attention to detail. Well done, merry Christmas!!

    • @ДенисДемьянов-к2й
      @ДенисДемьянов-к2й Год назад +11

      Мужик, ты лучший в своём деле!

    • @jasonrudasill8735
      @jasonrudasill8735 Год назад +8

      I have a 1970 240z that is in much worse shape this one was in. I always wondered what it would cost to have it rebuilt like this. Can anyone throw a ballpark range out there? I obviously know it depends on what needs to be done.

  • @Aztrina
    @Aztrina Год назад +6081

    Since he is even removing factory defects this could actually be the best 240Z existing when it's finished. We are witnessing something really special.

    • @Bonkikavo
      @Bonkikavo Год назад +614

      This is probably going to be the best car ever with zero sharp edges.

    • @DaleDix
      @DaleDix Год назад +184

      @@Bonkikavo Elon should have got him to do the Cybertruck!

    • @Greg-yu4ij
      @Greg-yu4ij Год назад +91

      Unless this baby winds up in Jay Leno’s garage, I shudder to think of what will become of this masterpiece

    • @kaldensyde
      @kaldensyde Год назад +38

      Именно так он и работает, устраняет даже заводские погрешности или правильнее сказать делает лучше чем производитель😄

    • @bloodhound627
      @bloodhound627 Год назад +116

      ​@@DaleDix
      lmao. nothing could save that travesty.

  • @davidheylen2452
    @davidheylen2452 Год назад +1304

    With this level of craftsmanship and attention to detail, it doesn't matter what he's even working on. It's just a joy to be able to watch this kind of commitment to excellence.

    • @mymechanics
      @mymechanics  Год назад +151

      Glad to hear that, thank you

    • @okeanos6391
      @okeanos6391 Год назад +14

      Agreed!

    • @Hakucho64
      @Hakucho64 9 месяцев назад +4

      It's like watching ClickSpring, it's mesmerising.

    • @Tech7778
      @Tech7778 8 месяцев назад +1

      ​@@mymechanicswhere is part 4

    • @hannesraitolehto7226
      @hannesraitolehto7226 Месяц назад +1

      Perfect👍👍👍👍🇫🇮🇫🇮very good job

  • @toddsnyder3318
    @toddsnyder3318 Год назад +891

    Wow.......... I worked in the autobody industry as a painter for 30 years and have never seen the level of thoroughness and artistry demonstrated here. To be able to shape metal like that with no filler is truly amazing ! Here's to you !

    • @mikl911
      @mikl911 Год назад +39

      Most people couldn’t afford this level of craftsmanship, even if you could find someone to do it. SO INPRESSIVE!!!

    • @idontthinkso666
      @idontthinkso666 Год назад

      is that the opposite of outpressive? @@mikl911

    • @hawkmoon3312
      @hawkmoon3312 Год назад +38

      Its really amazing. No cut corners, no "good enough" work. You have to admire that.

    • @Cupra317hp
      @Cupra317hp Год назад +36

      And he is doing it with Machines he rebuilded. Havey

    • @rh6761
      @rh6761 Год назад +4

      This guy does some amazing work. I wonder if outsourced some work (shaping) in this video…. (Def not meant in a tone to takeaway from this awesome channel)

  • @WielderOfTheFlameOfAnor
    @WielderOfTheFlameOfAnor 11 месяцев назад +547

    Who else checks daily to see if part 4 has been published? I cannot get enough of this restoration.

    • @CoreyCat4
      @CoreyCat4 10 месяцев назад +18

      I've been checking their Patreon regularly and their most recent vlog was posted five hours ago. I believe Part 4 will be due in February.

    • @yves3560
      @yves3560 10 месяцев назад +5

      Daily as well 😄

    • @dudubrodzeli2002
      @dudubrodzeli2002 10 месяцев назад +5

      Me! :( and I'm wondering who it takes so long?

    • @CoreyCat4
      @CoreyCat4 10 месяцев назад +5

      @@dudubrodzeli2002 Last time I checked their Patreon, they began sandblasting. I’m confident Part 4 will be uploaded no later than next month.

    • @dudubrodzeli2002
      @dudubrodzeli2002 10 месяцев назад +1

      Thanks

  • @danaschoen432
    @danaschoen432 Год назад +513

    These videos with no voice over, no dipodic music, no dumb jokes, just excellent videography are the very best!

    • @saeklin
      @saeklin Год назад +39

      No seamless sponsor plugs, no amazon affiliate link mentions, no begging for subs and likes in the middle of the video, no RANDOM words BEING capitalized in the TITLE, no obnoxious thumbnails with red arrows and dumb faces and pointing at nothing. And no clickbait like "BARN FIND DATSUN! WILL IT RUN?!!?"

    • @txd
      @txd Год назад +10

      @@saeklin Amen. Its a welcome changes from those inane youtube videos

    • @littlebird2573
      @littlebird2573 Год назад

      lol, looking at your tysytube@@saeklin

    • @sojungvage9740
      @sojungvage9740 Год назад +5

      he's like the future version of the "primitive technology" guy, who is also genius builder

    • @scottski51
      @scottski51 Год назад

      Some quiet Beatles music in the background would be fine with this Old Boomer! Or a jazz trio !!

  • @HansSiemons
    @HansSiemons Год назад +880

    This video is not even half an hour long and all those steps could easily be worth atleast 50 hours of my mechanics insider video’s. Such excellence again.

    • @mymechanics
      @mymechanics  Год назад +301

      It feels more like 50 days of work haha. It was a long way. Thank you very much.

    • @michixinqq
      @michixinqq Год назад +147

      everybody talks about how much time it takes him to do all of this.. but nobody thinks about how much time he has to put in camera work - setting it all up, angles, caring about equipment, remembering to record every step etc.

    • @HansSiemons
      @HansSiemons Год назад +15

      @@mymechanics I know I know. I watched many of the daily vlogs.

    • @TimothyDalton-rk1ve
      @TimothyDalton-rk1ve Год назад +27

      I would watch all 50 hours.👍

    • @andycmw7216
      @andycmw7216 Год назад +10

      This is skillful work and love keep it up 👏👏👏

  • @erikhendershot2350
    @erikhendershot2350 Год назад +482

    As a guy who grew up in a body shop as a 3rd generation body man, I thought I had seen it all when it comes to metal forming and fabrication. Learned some new tricks today that will come in handy. Plus, it’s awesome to see someone who can lay lead down. That’s a dying art and that guy is a real craftsman. Best wishes from Wyoming, USA.

    • @cjames282
      @cjames282 Год назад +7

      Glad Im not the only Wyomingite to appreciate him!

    • @jq5249
      @jq5249 Год назад

      Three Wyoming fans! WOOOOOOOO@@cjames282

    • @lachlangill1960
      @lachlangill1960 Год назад +14

      as a fellow bloke whos worked in the auto repair industry, i knew straight away that this guy was doing it right when that lead came out. So good to see after all the pricks out there who put a smear of filler over a whole car.

    • @tetedur377
      @tetedur377 Год назад +1

      @@lachlangill1960 I disagree. I actually worked with an old guy out in L.A., back when lead working was a lot more common, and nearly all of those guys scoffed at and derided anyone who worked with body filler.
      Done correctly, lead can be every bit as durable and long-lasting as plastic - which admittedly, had more than its share of issues, back in the day. They've improved the quality of the materials and the manufacturing process for filler that it's really only the environmental concerns that make lead so looked down on. Well, that, and it does take longer, even for an old, experienced guy.

    • @confidenceinmotion2005
      @confidenceinmotion2005 Год назад +1

      The very first name that comes to mind when someone says "lay lead down", is the name of Bill Hines - The Leadslinger ...He was an incredible person...R.I.P.

  • @leonsutanta6409
    @leonsutanta6409 10 месяцев назад +233

    No stupid music, no shouting, no dramas. Just showcase of pure skill. So enjoyable to watch. Keep it up! We need more vids like this

    • @evangelist6277
      @evangelist6277 7 месяцев назад +1

      And no talking

    • @Yutitsa
      @Yutitsa 7 месяцев назад

      Да! Это замечательно!

  • @silasmoon
    @silasmoon Год назад +569

    You know your work is good when every petrol head, fabricator, welder, coach builder, and machinist from every industrialized nation is showering your work in praise. Watching this is catharsis for the millions of cars with owners who wish they could do this to their own vehicles. It's beyond art.

    • @АлексДолффштейнн
      @АлексДолффштейнн Год назад +6

      мастер золотые руки

    • @XB10001
      @XB10001 Год назад +1

      And how do you know it is every one of these?

    • @professionalcommenter
      @professionalcommenter 7 месяцев назад +2

      This is conservatorship really. The mark of a true artist and conservator is one who fixed all the problems without you ever knowing it was fixed. This is his level of precision.

    • @donut6732
      @donut6732 7 месяцев назад

      definitely not welders 💀

    • @paulcarter2907
      @paulcarter2907 6 месяцев назад

      Too much 'Bish bash bosh, that'll do' these days..This is great stuff, craftsmanship..thank you..keep it up.

  • @808draft
    @808draft Год назад +369

    You are the epitome of “Quality over Quantity”. And that is why you will always be the best restoration RUclipsr.

    • @Kabodanki
      @Kabodanki Год назад +8

      My dude is doing true restoration.... not like a lot others

    • @badgerservices9665
      @badgerservices9665 Год назад +13

      I have never seen another resto channel on youtube beside MM where the restoration invariably turns out better than when the item being restored came new out of the factory. It really makes sense he is from Switzerland.

    • @sergiomora7660
      @sergiomora7660 Год назад +4

      I think that we come to understand that he is not in the restoration business, but in the mechanics business. He is elevating the craft of what can be done with materials, specially metals, to create industrial pieces.

    • @macedindu829
      @macedindu829 Год назад +2

      Yup. Sometimes I'll think about this channel and be sad that there hasn't been a video in quite a while. But I already know why: when the next video drops, it's sure to blow my mind. And boy, how this one did!

  • @MrBekliyom
    @MrBekliyom Год назад +325

    This is epic. This guy does the work of a welder, an electrician, mechanic, wagonmaker, blacksmith and most importantly lathe operator! I feel humbled as an average hobby woodworker.

    • @MrFiction80
      @MrFiction80 Год назад +27

      Don't forget magician!

    • @strawsparky33
      @strawsparky33 Год назад +7

      Don't forget auto-body and professional painter!

    • @ofsinope
      @ofsinope Год назад +24

      Unbelievable attention to detail. This is why mymechanics is the GOAT and most of the other restoration channels are just imitators.

    • @csababarath2784
      @csababarath2784 Год назад +6

      Well, as for the weldings.... that is almost painful to watch. All my respect to what he is doing, and I'm really curious of the end result, but welding only spots instead of continuous lines....

    • @PackthatcameBack
      @PackthatcameBack Год назад +4

      As always I am humbled by your skill and precision. Though I really wonder what the hell the previous owner did to that poor car for it to have so many dents in the floor of all places.

  • @mrjockey87
    @mrjockey87 11 месяцев назад +216

    The best line ever said but never spoken: ”I make a new one”. Number one reason why I watch these videos.

    • @mymechanics
      @mymechanics  11 месяцев назад +17

      Thank you, I'm glad you like it :-)

    • @mk84ldb
      @mk84ldb 7 месяцев назад +3

      I knew a French Canadian machinist who did a lot of work for me and when presented with a problem or task, his default reply was : ''No problem, I can fix.'' Perfect work everytime.

    • @paulcarter2907
      @paulcarter2907 6 месяцев назад +1

      I'll be back...!

    • @Fallowsthorn
      @Fallowsthorn 3 месяца назад +1

      Ah yes, the Datsun of Theseus

  • @alessandrostagni6025
    @alessandrostagni6025 Год назад +144

    My only regret is that the videos are too short. I could watch them for hours; is almost hypnotic and relaxing. The commitment to quality is so inspirational… Thank you

    • @ArniVidar
      @ArniVidar Год назад +15

      The Patreon Full Cut of the bodywork is almost 3 hours long. 😀

    • @beitie
      @beitie Год назад +9

      It's like ASMR for machinists.

  • @frankmadonna01
    @frankmadonna01 Год назад +142

    The absolute best channel on RUclips. Flawless work, no stupid music or talking. Perfection in every facet.

    • @lemonysnick5171
      @lemonysnick5171 Год назад +9

      No clickbait either. Just hard work and attention to detail. Must support this stuff.

    • @marckyle5895
      @marckyle5895 Год назад +1

      Odd Tinkering is of the same quality. I heard about this channel on his. Watch him restore an old Japanese chef knife first.

    • @lemonysnick5171
      @lemonysnick5171 Год назад

      @@marckyle5895 there are some other good channels for sure. I’ve seen odd tinkering before.

    • @tdaker
      @tdaker Год назад +1

      YES

  • @howardjmroy
    @howardjmroy Год назад +188

    It's an absolute delight to watch a perfectionist working on a restoration project, perfecting every bit of detail down to even a single nut and bolt.

    • @mallrat9500
      @mallrat9500 Год назад +1

      I was sure that he would do a complete sandblasting. It would be better that way.

    • @warbuzzard7167
      @warbuzzard7167 Год назад +7

      Next video.

    • @ronalddavis
      @ronalddavis Год назад

      he is going to sandblast it. did you watch the video@@mallrat9500

  • @vanpenguin22
    @vanpenguin22 17 дней назад +2

    One of the most empowering videos I have ever watched.
    I've seen so much rust through, and have allowed my sense of futility to run rampant unnecessary.

  • @kalenieity
    @kalenieity Год назад +354

    His ability to shape the repair pieces in three dimensions is mind boggling

    • @MrMeasaftw
      @MrMeasaftw Год назад +11

      I am in the process of building an mdf piece of furniture. Even with spending multiple hours. I still manage to mess things up. And here this guy is, shaping metal down to less than millimeter tolerance. Incredible..

    • @slickboyd
      @slickboyd Год назад +33

      @@MrMeasaftw Not to downplay his work, but he's most likely also had a fair amount of trial and error, just not shown in the video. Don't cut yourself short.

    • @MrMeasaftw
      @MrMeasaftw Год назад +6

      @@slickboyd Awh thanks... Yeah I don't mind making the mistakes. And I get that he's doin this professionally and I'm not.
      But I can surely appreciate the work a lot more now that I've recently had a project of my own.

    • @deltajohnny
      @deltajohnny Год назад +1

      And countless hours... I wonder how many?! 😅😅

    • @CadillacDriver
      @CadillacDriver Год назад +2

      This type of work is "mind boggling" to you? Wtf? It's literally nothing more or less than how it's been done since coach building in the 1800s.

  • @wselander
    @wselander Год назад +327

    The dedication is insane. We spent all that time on the rust on the passenger's side and then he casually cuts to the entire driver's side being done. My jaw hit the floor.

    • @mymechanics
      @mymechanics  Год назад +102

      Was a lot of work.

    • @peterschancel7223
      @peterschancel7223 Год назад +4

      @@mymechanicsI remember working on my wifes first Car , A 260 Z with triple webbers, Same Rust issues after 5 years, cut and fiberglass ..Sold it when we had kids. THEME,,, Actions and sounds speak more than words.. Great work ,, I always wonder where you got the 50-80 year plus old hand machines.

    • @61spindrift
      @61spindrift Год назад +1

      @@mymechanics We are sure it was! So show it!

    • @louisfkoorts5590
      @louisfkoorts5590 Год назад

      @@61spindrift
      Spin/drift 😱.
      You are convinced an Entity going by/under such a toxic labeling/epithet is deserving of extras, from the "Unseen University" *? * T. Pratchett 🤣

    • @61spindrift
      @61spindrift Год назад

      @@louisfkoorts5590 In English please that all can understand. A college degree and yet I fail to understand the meaning of your comment. Maybe it is because my degree is not from an Ivy League School...don't know. Please elaborate.

  • @paulbarnes5051
    @paulbarnes5051 11 месяцев назад +30

    Am a carpenter and a mean joiner of timber to splice and repair various items. My wife just walked past and said why is your mouth hanging open dear.
    Brilliant, thoroughly enjoyed every minute of this master class in fabrication and repair, Proper job as my Mother used to say.

  • @TheNeilMoore
    @TheNeilMoore Год назад +177

    I have such a respect for how you never skip corners, never avoid doing what's needed, there's no task too small, and nothing is left unaddressed. You take the time, and effort, and focus, and energy to attend to every detail, always executing with excellence. It's completely impressive. I know nothing at all about the things you restore and repair, yet, I watch every one of your videos, and am always fascinated and enthralled by your work. Thank you so much. Totally entertaining.

    • @dannyinaus
      @dannyinaus Год назад +1

      Yes, these videos are an OCD person's dream

  • @TheHoinoel
    @TheHoinoel Год назад +177

    Shoutout to all the patrons supporting this channel. Thanks for letting this guy absolutely smash it in the workshop and taking us along for the ride!

    • @CadillacDriver
      @CadillacDriver Год назад

      You mean "suckers", right? Only morons pay RUclipsrs.

  • @TheAimb0t
    @TheAimb0t Год назад +184

    Als ausgebildeter Karosseriebauer muss ich echt sagen: Hut ab vor dieser Leistung. Ganz hohes Niveau.

    • @RicolaMartini
      @RicolaMartini Год назад +14

      Bin seit über 30 Jahren dabei. Was hier gezeigt wird ist erstklassig👍🏻

    • @fxr.markus
      @fxr.markus Год назад +6

      Gut als unwissender da feedback zu lesen aber es sieht wirklich aus als wusste er was er tut

    • @PedroPlckle
      @PedroPlckle Год назад +1

      Absolut

  • @billyvitro1676
    @billyvitro1676 8 месяцев назад +13

    In the early 80s I worked next door to a guy who restored cars this way, specializing in early Mustangs. It was amazing to watch then (as a teenager), and it’s still amazing to watch now. This level of craftsmanship and attention to detail, and clear love of his craft is almost forgotten these days.
    Although I do miss a good “I make a new one”…😬

  • @BM-si2ei
    @BM-si2ei Год назад +137

    I keep seeing you taking completely roached sheet metal and patching it back to factory fresh, it's amazing. At some point, i expect to see "the body is completely unsalvageable........I make a new one"

    • @davesmith5656
      @davesmith5656 Год назад

      I had the same thought. I know nothing about welding or stamping or whatever, but the factory has the body stamp or stamps and machinery. It does seem like the factory could have bothered to put rust prevention paint on it, instead of just leaving it bare metal. Paint can't be that expensive.

    • @_Killkor
      @_Killkor Год назад +1

      Hero: my mechanics
      Ult: "I make a new one" - if provided with enough tools and resources, my mechanics will fix and restore anything in existence without breaking a sweat. This rule also applies to abstract concepts. Limits to this power are yet to be discovered.

    • @JackHudler
      @JackHudler Год назад +1

      ​@@davesmith5656 back in the 70's, you didn't expect a car to last past 50,000 miles. Today we think nothing about a car with 100,000 miles on it... unless you live in the rust belt. No amount of undercoating will save you there.😁

  • @Radi0he4d1
    @Radi0he4d1 Год назад +100

    elite level repair, not a drop of Bondo in sight, pure metal, I am stunned and speechless

  • @alightthatnevergoesout
    @alightthatnevergoesout Год назад +303

    This dude has so many tools and so much equipment. He's got a lab straight out of a movie scene.

    • @ericeaton371
      @ericeaton371 Год назад +65

      he's restored almost all the tools he's been using. now i know why he did..... he's playing chess while we thought it was checkers

    • @AldenDoble
      @AldenDoble Год назад +3

      ​@@ericeaton371 😂😂😂😂

    • @louisfkoorts5590
      @louisfkoorts5590 Год назад +1

      😁👍🏻

    • @alightthatnevergoesout
      @alightthatnevergoesout Год назад +1

      @@ericeaton371 😂😂😂 nicely done

    • @andersjjensen
      @andersjjensen Год назад +1

      @@ericeaton371 Internet comment of December right there!

  • @chromaticsdesigns869
    @chromaticsdesigns869 11 месяцев назад +72

    It's so refreshing to have such videos without music but actual working sounds. It's actually soothing

    • @mymechanics
      @mymechanics  11 месяцев назад +5

      Thanks a ton!

    •  11 месяцев назад +2

      I totally agree on this... These are top quality videos and very professionally edited

    • @CoreyCat4
      @CoreyCat4 11 месяцев назад

      And for those who like a balance of music and workshop ambience, I can't recommend @Mad4Motors_ enough!

  • @AldenDoble
    @AldenDoble Год назад +184

    Your attention to detail is second to none. This is the true art of craftsmanship in it's purest form. Please never stop exisitng 🙏🏻

  • @adamhotrod
    @adamhotrod Год назад +56

    I always remember watching the guys at Boyds literally covering their cars with filler before paint. That was supposedly the pinnacle of what the resto/hotrod industry had to offer. This level of skill and craftsmanship warms my soul. You are a true master and I cannot wait to see how good this car looks when it's done.

    • @ruzziasht349
      @ruzziasht349 Год назад +3

      Europe vs the USA. Surprised you're surprised.

    • @VladTepesVEVO
      @VladTepesVEVO Год назад +1

      While I also commend Boyd Coddington (RIP) and he's built some amazing hot rods, this video truly shows a night and day difference when it comes to restoration. This skill level is, dare I say it, nigh impossible to find in any regular US restoration shop. I'd argue that the exception to this rule are Singer, their Porsche restorations seem to show this level of attention to detail.
      He's putting a lot, A LOT of shops to shame with his craftsmanship! 'muricans take note!!

    • @TheCoffeehound
      @TheCoffeehound Год назад +8

      @@ruzziasht349 Nah, it is not about Europe vs USA, or lack of craftsmanship. It is about whether or not the customer is willing to pay for this level of work. Most will not, even if they have the money to do so. That means that this level of craftsmanship is either a very expensive hobby, or it is for a very small, exclusive set of customers who will pay for your labor.

    • @Dunkaroos248
      @Dunkaroos248 Год назад

      Check out what roadster shop out in Illinois does with metal fabrication. It can be done, those skills still exist in the US, but it comes at a very prohibitive cost.

    • @ruzziasht349
      @ruzziasht349 Год назад

      @@TheCoffeehound come on buddy, US homes are built of wood, and fall over in a storm. European homes have been there for 100s if not 1000s of years.

  • @matthewdebeer8453
    @matthewdebeer8453 Год назад +26

    SO much work on that passenger side rear panel and then just casually “oh I did all that again on the driver side”. Craziness. I’m so excited to continue watching this project

    • @ArniVidar
      @ArniVidar Год назад

      Thankfully, the driver side is always in far better shape, so there was always less work over on that side. 😀

  • @frankierzucekjr
    @frankierzucekjr 8 месяцев назад +10

    I just gotta say, is there anyone better than this man at fixing things? No one I've ever seen goes above and beyond to get things done right, more than My Mechanics..
    I've been a fan for many years now, and it's just so much fun to watch you do these incredible projects. It's gotten to. Point where i watch other restoration channels and i say "meh, this guy doesn't even come close" lol
    You spoiled us with phenomenal craftsmanship. Well done bud, sorry im so late to catching up with this one

  • @darrenscruggs8832
    @darrenscruggs8832 Год назад +64

    Normally I am impressed with the work you do and the videos you make, but this one left me in awe. The fact that you were able to make those patches with the complex curves and angles and have them drop in seamlessly seems like nothing short of magic to me.

    • @macedindu829
      @macedindu829 Год назад +1

      Nothing short of magic to almost everyone, I'd wager.

  • @mickeyxxmousey
    @mickeyxxmousey Год назад +100

    MM is the only channel that I've watched multiple times of every single video, and always come back for it again and again. Satisfying every single watch. The amount of work and care that goes into every single tiny detail is unmatched.

    • @hawkmoon3312
      @hawkmoon3312 Год назад +1

      Hes truly the one with the most attention to detail. So many small steps that are in theory unnecessary, like removing all sharp edges etc. But its just better workmanship. Love it.

  • @ddfann
    @ddfann Год назад +65

    I'm ridiculously impressed by the skills you demonstrate time and time again. This is by far my favourite restoration channel because the quality and variety of the work you produce is outstanding.

  • @raceace
    @raceace 11 месяцев назад +6

    Zero compromises. A true artisan. Much Respect. There wont be an original S30 chassis in the world with this much structural integrity.

  • @nagymarton7674
    @nagymarton7674 Год назад +16

    My father and i are used to watch your videos together, almost since the begining of the chanel, and now i'm sitting before the smart tv alone and i wish, if he could be with me too while i fight with my tears above a big bowl of popcorn. Rest in peace, Dad.

    • @andersjjensen
      @andersjjensen Год назад +2

      Condolences. He sounded like a good dad.

    • @ShainAndrews
      @ShainAndrews Год назад

      Don't waller in it too long. All things come to pass, so make something of your time while you're here.

    • @nagymarton7674
      @nagymarton7674 Год назад

      @@andersjjensen the best, if you ask me. I have a lot of friends, who hase a terrible father, and i mean around 90% of my friends are like this. My father was one of my best friend and i miss every second we spent togeter.

  • @Beebop-ow9ge
    @Beebop-ow9ge Год назад +35

    I’m really enjoying this restoration, I did bodywork for 10 years before recently changing careers and it’s nice to see RUclips videos showing proper repair techniques

  • @calevel
    @calevel Год назад +16

    Honestly this is the only channel that I can sit down and watch for an extended time and still want it to keep going. Your work is impressive and impeccable!!

  • @mhammadzoubi
    @mhammadzoubi 9 месяцев назад +2

    No drama, pure skills and perfect workmanship.
    This is pleasing my eyes! Feels like you're taking us along a beautiful journey.
    Can't wait for more

  • @sheeevum
    @sheeevum Год назад +91

    This is absolutely insane attention to detail on a build so physically big! Thank you for sharing with us.

    • @fylucasx
      @fylucasx Год назад +4

      He's an absolute legend 👏

    • @mymechanics
      @mymechanics  7 месяцев назад

      Thank you so much for the support!

  • @UrGolf88
    @UrGolf88 Год назад +66

    Als Kfz-Mechatroniker und Liebhaber von Old- und Youngtimer kann ich nur Bravo sagen. Was du hier tust lässt mein Herz höher schlagen, natürlich im positiven Sinne. Es ist immer erfreulich, wenn jemand mit Know-How so viel Leidenschaft in die Aufbereitung und Erhaltung von solch schönen Fahrzeugen steckt. Weiter so!!! Grüße aus dem Nachbarland ✌️

    • @thomasneal9291
      @thomasneal9291 Год назад

      ^^Was Er sagt

    • @SoaringExperience
      @SoaringExperience Год назад +3

      Und es ist fair und ein feiner Zug zu erwähnen, dass ein Freund die Haube gemacht hat (das verzinnen). Er streicht also die Lobeslorbeeren nicht alleine ein :)

    • @UrGolf88
      @UrGolf88 Год назад

      Das stimmt, ist echt ein feiner Zug.

  • @Vickie-Bligh
    @Vickie-Bligh Год назад +110

    It's lovely to see those steps like this. Excellent filming and storytelling, MM. So tasty and satisfying to watch. It was a joy to see this progress. Thanks for sharing with us all and looking forward to the big sandblasting. Merry Christmas to you and your family.

    • @mymechanics
      @mymechanics  Год назад +30

      Glad you enjoyed it, thank you very much :-)
      Merry Christmas!

  • @bertholdbouman3007
    @bertholdbouman3007 5 дней назад +1

    Wow! Hat off for you, it takes decades to master these skills! You make it look so easy 👍🎩

  • @mahina1963
    @mahina1963 Год назад +8

    It's a pleasure to see your restored tools in use (the Gressel vice, the Beverly Shear), remembering the tear-down and build-up!

  • @arielgatti8975
    @arielgatti8975 Год назад +44

    I've been an engineer for 40 years and seen wonderous feats of engineering and manufacturing. This, though, is fantastic. It's a work of art...high engineering art. Truly a master class.

  • @WuceBrillis219
    @WuceBrillis219 Год назад +43

    Your work ethic and attention to detail is incredible. This series has been beyond what I thought could be done.

  • @jrvasquez
    @jrvasquez 8 месяцев назад +2

    I just came across your channel this morning. Watched with much enjoyment all three of these and now looking forward to video number 4. High level Artistry and Craftsmanship combined is a joy to behold.
    I owned a 1970 240Z, 1974 260Z and a 1978 280Z. Should have kept the 1978... 🤥
    SUBSCRIBED

  • @authorontranth5990
    @authorontranth5990 Год назад +17

    Going out of your way to imitate the original spot welds on those rocker panels took a few minutes, but shows so much dedication to bringing things back to their original form instead of just "fixing" them. Thank you for taking us along for the ride, MM. Wonderful work.

  • @michaelbiljon8249
    @michaelbiljon8249 Год назад +72

    The dedication, attention to detail, and craftsmanship is breathtaking. This is the best thing on RUclips right now.

    • @PendeltonWhiskey
      @PendeltonWhiskey Год назад

      @@Cristobal_2012 does you're mother know what you're up to?

    • @BrandBrian
      @BrandBrian Год назад +1

      Agreed. Best thing I've seen in a while.

    • @irwinkevincarpio
      @irwinkevincarpio Год назад

      I highly recommend Bad Obsession Motorsport's project binky then if you like this content.

  • @bucksmanuk
    @bucksmanuk Год назад +131

    The quality of the craftsmanship on this channel never ceases to amaze, but the die made to obtain the correct profile on the sheet metal at 4:30 to 4:55 was on another level.

    • @mymechanics
      @mymechanics  Год назад +8

      Thank you, I'm glad you like it :-)

  • @ptp79
    @ptp79 11 месяцев назад +17

    The most meticulous work done on the internet is here. The only person who does the job to the perfection.

    • @mymechanics
      @mymechanics  11 месяцев назад +1

      Glad to hear that, thank you

  • @SteveWhipp
    @SteveWhipp Год назад +17

    Sir, you are a craftsman without compare. Simply the highest quality of workmanship shown of any restoration channel. You're the best and I can only imagine how long it's taken you to learn all the techniques and processes on show here. My utmost respect.

  • @mericet39
    @mericet39 Год назад +14

    It is always fun to try and spot the previously restored tools put to good use in these videos

  • @Aroganta469134
    @Aroganta469134 Год назад +37

    It's incredible the dedication and patience you put into this restoration.
    You probably had 2-3 weeks to work only on this part.
    I'm a person who has a lot of patience myself, but what you're doing here is just amazing!
    The fact that you have been working on the project for over six months and are still carrying out everything conscientiously and properly, all I can say is:
    My respect!
    You are a master of your kind!
    In diesem Sinne: Chapeau!
    Mach weiter so!
    Grüße aus Deutschland

  • @ssmoker48
    @ssmoker48 18 дней назад

    I have never watched full restoration videos, but if others even put 25% of the effort you have into this ... this is simply beautiful.

  • @albertsampson6568
    @albertsampson6568 Год назад +19

    If your channel isn't over 5 million subs after this, I'd really be shocked. The absolute detail you have in what you fix or make is beyond amazing. Thank you for these update videos. I cannot wait until we see the final product.

  • @williamkelley4724
    @williamkelley4724 Год назад +30

    this guy has a level of pride and commitment rarely found in the automotive restoration industry. bravo bud!

  • @metefatihtatoglu1762
    @metefatihtatoglu1762 Год назад +65

    My dear friend, the world owes you a thank you for doing this. 🙏🏻

  • @gordiefrench5342
    @gordiefrench5342 9 месяцев назад +1

    I am blown away at the level of metal work skill. It is very interesting to see the great knowledge it takes to complete such a project.
    Great work

  • @misterpatina
    @misterpatina Год назад +4

    Thanks for your Shoutout, iam glad i could help so far!
    Looking forward to take a spin in this old beauty!

  • @jonanderson5137
    @jonanderson5137 Год назад +6

    It's amazing, I remember seeing the shear being restored and wondering if it would sit on a shelf or table to only gather dust.
    The work on the car is very good, but I get real joy from seeing restored tools do work.
    This is the first time I've seen leading too.
    Outstanding workmanship!

  • @Chase_Adams
    @Chase_Adams Год назад +86

    MyMechanics I’ve been watching your videos for years now, have turned on so many people to your channel, but this series is a cut above. Absolutely insane to see clockmaker precision being paid towards some random inner panel of a corner of a car body that will maybe never be seen by human eyes again once all is put back together. On behalf of all us viewers, thank you for the gift that these videos are. Can’t wait to see the rest.

    • @mymechanics
      @mymechanics  Год назад +10

      Thank you very much, I really do appreciate it :-)

    • @balanair2577
      @balanair2577 8 месяцев назад +1

      I am an avid watcher of this channel. This is the fourth time I have watched this video. So fascinating to see how this car body is being reborn. And the amount of tools this man has! I never imagined that these kind of tools even existed.
      If there is a nobel prize for mechanical work this man is the prime candidate! Anxiously waiting for the next video!

  • @youseetime
    @youseetime 7 месяцев назад +3

    These are the kind of restoration videos I love, no annoying background music, just to watch the artistry of skilled craftsmen at work. Well done.

    • @mymechanics
      @mymechanics  6 месяцев назад

      That's nice to hear, thank you!

  • @RaggedyAtom
    @RaggedyAtom Год назад +15

    Now that's certainly someone who has a lot of patience and precision. You've certainly shown us ways that can help in case a car needs a bodywork restoration, with examples being the template marking out, and assessing the structural integrity, etc. It may be a long journey, but I think the final result will be spectacular!

  • @badgerservices9665
    @badgerservices9665 Год назад +13

    This is years and years of mechanical engineering and fabrication experience coming together to produce something that will be sincerely beautiful. I feel bad this video series isnt getting the views like some of MMs other more 'fun' projects but the view count does not reflect in any way how incredible this restoration is. This is of course MMs finest work to date. I really cannot wait to see the final product. This surely will become one of the greatest car resto video series on youtube. Thanks for making this video!

    • @titosrevenger
      @titosrevenger Год назад +2

      The other videos have been out for many more months/years so of course they'll have more views. This series is doing just fine in terms of views.

  • @PrimalEdge
    @PrimalEdge Год назад +10

    I spent 16 years working in a body/mechanic shop before I moved on to a corporate job, the nastagia hit on these videos is massive! great work, brings back so many memories...

  • @balmoral2472
    @balmoral2472 11 месяцев назад +1

    Danke für den wirklich gut und exakt gemachten Content!

    • @mymechanics
      @mymechanics  11 месяцев назад +1

      Danke vielmals für die Unterstützung

  • @KyleWhitehead
    @KyleWhitehead Год назад +21

    Best channel on RUclips I look forward to these more than major life events

  • @АндрейАлексеев-э2ю

    Какой же крутой и доскональный Человек!!! Снимаю шляпу! Это шедевр! Успехов Мастеру!

  • @WargenWalrus
    @WargenWalrus Год назад +24

    You are one of the only RUclipsrs who puts a filter over the video when welding! Thank you so much for not blinding me during my 2am watch times

    • @ArniVidar
      @ArniVidar Год назад

      Agreed! It's seemingly a little thing, but it's SO much better for your eyes.

  • @corwin881
    @corwin881 Год назад +7

    The grade of workshop you are displaying here is so amazing. Thanks a lot for letting us take part in this and lots of respect!!!

  • @brianbarnes2166
    @brianbarnes2166 Год назад +22

    I didn’t think you could be any more skilled than you already were… you are an artist of precision metalwork. It is beyond my comprehension. I don’t think I could do even the simplest of these repairs. I eagerly await the next video!

    • @Aquana01
      @Aquana01 Год назад

      Hes one with the metal.

  • @andreasvanspeybroeck666
    @andreasvanspeybroeck666 11 месяцев назад +12

    I loved this episode of "the war on rust". Thank you for not putting any music, love the bangs and grinding sounds.

  • @bruceyoung1343
    @bruceyoung1343 10 месяцев назад +3

    The Datson 240Z has been one of the top 3 cars I’ve loved since 4th grade. In that art class I used a compass point and scratched the 240z on a 12” x 12” linoleum sheet. Man was I proud of that. Watching you do the body work on that is a thing of beauty. Then you blew my mind with the lead working on the hood. I’m definitely gonna follow your progress on this machine.

  • @gilmtz1101
    @gilmtz1101 Год назад +34

    … Everyone talks about the huge handwork (impecable by the way), but: Can we talk about the magnificent editing job? Marvelous!
    Congratulations, MyMechanics, you're an inspiration. Greetings from México.

    • @ArniVidar
      @ArniVidar Год назад +5

      I think most people don't appreciate the ridiculous amount of videography, audiography, lighting and editing that he uses for his videos. His mechanical skills aside, he's a phenomenal video creator!

    • @imoheight
      @imoheight 11 месяцев назад

      Also the fact there’s no yapping beforehand and it’s just straight to the point

  • @stefanmarinkovic7942
    @stefanmarinkovic7942 Год назад +5

    Man, you are the bodywork God. The attention to details, jeez... So happy to be able to watch you work.

  • @Jerod_Helt
    @Jerod_Helt Год назад +37

    As someone who has restored a few cars and even made silent videos of those restorations… this is AMAZING!. The build quality and the video quality are both Excellent!

    • @mymechanics
      @mymechanics  Год назад +6

      Thank you very much, I'm glad you like it :-)

  • @andinielsen
    @andinielsen 9 месяцев назад +1

    I have never before seen such a master at his craft, perfection at every turn. I cannot wait to see the fruits of your intricate labour.

  • @TheDGAF06
    @TheDGAF06 Год назад +8

    You know the saying “no matter how good you are at something there’s always someone better”. This guy is the someone. Awesome work.

    • @mymechanics
      @mymechanics  Год назад +1

      Thank you very much, I really do appreciate it :-)

  • @xanoks1116
    @xanoks1116 Год назад +12

    Your dedication, expertise and thoroughness is honestly a sight to behold.

  • @LFKGooner
    @LFKGooner Год назад +5

    Absolutely amazing 👏🏾. What is actually very remarkable in this video more than anything else is how it was edited. Compressing months of work in a 26-minute video. Genius. Also worthy noting is the use of previously restored equipment.

    • @ArniVidar
      @ArniVidar Год назад +1

      I think most people don't appreciate the ridiculous amount of videography, audiography, lighting and editing that he uses for his videos. His mechanical skills aside, he's a phenomenal video creator!

    • @LFKGooner
      @LFKGooner Год назад

      @@ArniVidar Absolutely right about that.

  • @MLFProp
    @MLFProp 10 месяцев назад +5

    240Z's were notorious for their rocker panels rusting. Mine did the exact same thing and I knew of many others that did the same. You're doing great work. Can't wait to see the finished product. It's making me nostalgic.

  • @darson100
    @darson100 Год назад +16

    What a project! Your level of fabrication skills are absolutely next level by the way.

  • @mcseforsale
    @mcseforsale Год назад +10

    I'm no expert, but I play one in RUclips comments. I gotta say, your metalwork in this restoration far surpasses MANY of the million-dollar restorations I've watched over the years. And, I've watched HUNDREDS. Simply amazing, patient work done in very intelligent sequence. Thanks for sharing.

  • @scottkew6278
    @scottkew6278 Год назад +27

    As someone in California who has done a fair share of Steam Locomotive repair I was REALLY impressed with the level of the quality of the work and the skill level of those hands! WOW !! from California USA.

  • @dangerx7697
    @dangerx7697 11 месяцев назад +5

    Only man alive that can actually deconstruct an already icon of a car from the factory and improve it ...... If I've said it once I've said it a million times........ this guy is an alien, a freak of nature and his main goal is simply one thing.....PERFECTION!!!

    • @mymechanics
      @mymechanics  11 месяцев назад

      Thank you very much :-)

  • @erinbrussell1422
    @erinbrussell1422 Год назад +16

    I love all your videos but the amount I am invested in watching this car restoration is unreal; the excitement to see part 3 uploaded when I got home cannot be put into words. It looks great to far!

    • @mymechanics
      @mymechanics  Год назад

      Thank you so much for your support :-)

  • @russellforrest1730
    @russellforrest1730 Год назад +11

    Jaw-dropping skills! All those compound curves - you made it look easy, but I know that only a master craftsman can do that and make it look seamless. Hours and hours and hours and hours of work boiled down so that we can enjoy about 25 minutes of supreme pleasure. So grateful. Wish you and your nearest and dearest all the best for 2024. Can't wait to see the body blasting and paint!

    • @mymechanics
      @mymechanics  Год назад +1

      Thank you very much, I really do appreciate it :-)

  • @GogaKuzenko
    @GogaKuzenko Год назад +17

    Жду каждую серию. 😁
    Твой подход и технические решения, вызывают уважение, особенно к мелким деталям. 👍
    Очень мало таких мастеров, здесь на Ютуб, показывают свое мастерство.
    Побольше бы таких как ты. 🤝

  • @ThunderChasers
    @ThunderChasers 9 месяцев назад +2

    all the other comments say it best. but I am floored...by the attention to detail and pure raw talent and craftsmanship. There is no better restoration channel anywhere, youtube or otherwise.

  • @РустамАхролов
    @РустамАхролов Год назад +59

    Боюсь даже представить, сколько такая реставрация стоит. У мастера золотые руки и железные нервы!

    • @dukekta79
      @dukekta79 Год назад

      в Швейцарии? Пока, всё делалось на уровне гаража)
      ЗЫ: А как она была нейтральна, во вторую мировую - так и останется, на уровне гаража)))
      Нужно выбирать сторону-то;)
      Главное, чтоб сторона - приняла)))

    • @2DKolhoznik
      @2DKolhoznik Год назад +5

      На втором канале автор подробнее рассказывает, даёт комментарии по процессу реставрации - этот проект он делает для себя, так что нисколько не стоит))
      Но вообще работа ювелирная, конечно))

    • @dukekta79
      @dukekta79 Год назад +5

      @@2DKolhoznik я был не прав, что наехал на Швейцарию) а главное, что потащил политику в не тот канал - выбесили до этого, а тут сорвался. Я - не прав!((( Простите

    • @espero21
      @espero21 Год назад +1

      ​@@dukekta79внезапно. Молодец.

  • @DATONALKY
    @DATONALKY Год назад +15

    I love the fact that in 50 years time if this car ever gets restored again that nobody could tell that it had been restored previously, the attention to detail is mind blowing....
    Absolutely beautiful work 👌👌

    • @fellipec
      @fellipec Год назад +4

      Them it will be the Theseus' Datsun

  • @NI4IK82
    @NI4IK82 Год назад +32

    Очень нравится смотреть Ваш канал. Скрупулезность, внимание к деталям! Перфекционизм во всем! Вы настоящий мастер своего дела! Мое почтение! 👍🔥

  • @warrenmichael918
    @warrenmichael918 8 месяцев назад +4

    I think this is my 5th or 6th time stopping back in to this video and channel to make sure i am not missing any new videos.

  • @Nick_107
    @Nick_107 Год назад +13

    Эта машина будет явно в лучшем состоянии, чем когда она вышла с завода. Насколько же увлечённый человек работает и насколько разносторонни его навыки работы материалами! Молодец, буду смотреть не отрываясь!

    • @sergioqwaszx
      @sergioqwaszx Год назад

      а есть дурачок из тюмени который разобрал пять мерседесов что бы починить один 119
      но так и не дочинил
      железо ему вечно не то

  • @ptizim
    @ptizim Год назад +23

    Even while working in industry and being in direct contact with highly qualified technicians in different fields such as material shaping, machining, assembly, coating, etc... I am still impressed by the methodology applied and the mastery of these disciplines that you show in your videos.
    I think you've done the most annoying part of the restoration, bravo and courage for the next.

    • @CadillacDriver
      @CadillacDriver Год назад

      Are you implying he is better, or on-par? Because this is all relatively routine and certainly nothing extraordinary.

    • @ptizim
      @ptizim Год назад

      @@CadillacDriver: the fact of having these qualities brought together in a single person (even if he sometimes gets help with specific tasks) is perhaps not extraordinary but is far from ordinary.

    • @CadillacDriver
      @CadillacDriver Год назад

      @@ptizim yeah but you have implied that he is some kind of Messiah who is unsurpassed in terms of his work. This is literally routine body work. If you claim to be impressed by this man's work - that makes no sense. Because all the fields you claim to have been a part of, should surpass this level of skill on display here.

    • @ptizim
      @ptizim Год назад

      @@CadillacDriver “some kind of Messiah”? Relax, I didn't see a miracle either.

    • @CadillacDriver
      @CadillacDriver Год назад

      @@ptizim yeah you did.

  • @kncsmooth8737
    @kncsmooth8737 Год назад +7

    Absolutely! Restoring old cars is like breathing new life into history. Your dedication, craftsmanship, and passion for reviving these classic beauties inspire countless enthusiasts worldwide. Keep up the fantastic work! Each transformation you share not only celebrates the past but also fuels the dreams of those who love the roar of a vintage engine and the elegance of timeless design. Your channel is a treasure trove for anyone who adores the artistry and soul of vintage automobiles.

  • @moegamatgamieldien110
    @moegamatgamieldien110 11 месяцев назад +7

    The patience and precision is remarkable.
    The best restoration techniques I have ever seen 👍

  • @Heroo01
    @Heroo01 Год назад +20

    God, I love this project so much. This man is simply a cut above the rest

    • @macedindu829
      @macedindu829 Год назад +2

      It's kinda unfair. If there was any doubt before, this video makes it clear that the rest of the resoration channels have to bend the knee.