Best Wireless 2.1Plate Amp For Diy Boombox, Arylic

Super easy to install with plate amp, build your wireless boombox without complicated skills.
Maximum 50W x 2 +100W powerful output for your 2.1 projects and audio system.
Support Spotify, Apple Music, Amazon Music, Tidal, Deezer, Qobuz, TuneIn, Internet Radio and more.
Sync audio or play different songs at the same time with multiroom streaming.
Convenient, full wireless control by FREE iOS & Android 4STREAM app.
Link to the manufacturer's website: www.arylic.com...
Connectivity
WiFi:
IEEE802.11 b/g/n 2.4G
Bluetooth:
5.0 SBC/AAC, 15M, BT Receiver
Wired Network:
Ethernet Single 10/100M RJ45
Power Input
12V-24V/DC in
Audio Input
Analog:
3.5mm Line Input (1 Vrms)
Digital:
USB A Input
Optical Input
Audio output
Analog:
Speaker Out and Subwoofer Out
Other I/O Interface
LED pin connector
IR pin connector
Button pin connector
Amplifier Chip
TPA3116D2*2
Speaker Power
L&R 50W@4Ω + Sub 100W@2Ω BTL load at 24V
L&R 30W@8Ω + Sub 75W@4Ω BTL load at 24V
L&R 22W@4Ω + Sub 48W@4Ω BTL load at 19V
L&R 15W@8Ω + Sub 30W@4Ω BTL load at 15V
Speaker Impedance
4-8Ω (Stereo)/2-4Ω(Sub)
USB Host
For USB pen drive/stick, 1000 songs limited.
Frequency response
20Hz to 20kHz
SNR/THD+N
≥85dB @ max/0.9% @ 1KHz, 1W
Music Format
FLAC/MP3/AAC/AAC+/ALAC/APE/WAV
Audio Format
Decoding up to 192khz/24bits
Output up to 44.1khz/16bits CD quality
Protocols
AirPlay, DLNA, UPnP, Spotify Connect, Qplay
NAS
Support NAS with DLNA support
General
Dimentions:
149x134x59mm
Weight:
500g
Physical Control
Power Button
Device on:
Short press once: Switch input mode
Long press once: Switch off
Short press twice: Disconnect current WiFi connection and enter paring mode (WiFi mode)；
Disconnect current connected Bluetooth device (Bluetooth mode)
Short press three times: Restore the factory settings
Device off:
Short press: Switch on
Volume Knob
Short press once: Switch input mode
Treble Knob
Short press once: Reset treble level to 0
Long press 5secs: Increase crossover frequency by 10Hz
(Crossover frequency range from 80-200Hz, default 110hz)
Bass Knob
Short press once: Reset bass level to 0
Long press 5secs: decrease crossover frequency by 10Hz
(Crossover frequency range from 80-200Hz, default 110hz)
Music from #InAudio: inaudio.org/
Track Name*Skateboard
No Copyright Music inaudio.org/tr...
No Copyright Music "Always Fun" by Cold Cinema
bit.ly/3HYdV57

[@predalien2384]

🤣🤣🤣🤣

[@mitacccosminmc5297]

never use cilinder speaker enclosure! you can find enough topics about this issue

[@10diy]

To have many opinions and materials on the subject.
It depends on what we will read and like.
But the most important thing is to physically try and hear the sound!

[@AbdulHakim-eh6gc]

Hi can you please make a project on bluetooth partybox like JBL partybox 710 or 1000 with fully battery power supply

[@10diy]

Yes, it can be done.

[@AbdulHakim-eh6gc]

@@10diy Then please make it as your comfort zone.

[@Александр-х1ч1п]

С каждым разом все креативные браво🤝🤝🤝🇷🇺