This is a low psi (60) machine so the restriction is negligible. The kit also includes an adapter for standard water hose fitting so the choice is yours. I have no issues with flow using the 1/2 in. Diameter barb though🤘🏾
I would love a 1 year update on those penta valves. I have seen so many crack, but it could be that the person over tightened. Looks good, but did it last?
The pent valve, by what I hear, work well but are kinda fragile. Remember the pumps, no matter what brand, make them about a season and need to be replaced or rebuilt. But this setup is very cost-friendly to get our foot in the door.
And also one big thing how do you keep your pump from overheating man I know there's something that you could bypass but I mean I don't have no time to be filling up with water constantly for it to not overheat what do you do please thank and also what State you from
It works great this way. Either way works but this is the way I recommend mounting it because if anything goes wrong and it springs a leak it will leak onto the floor rather than down into the motor🤘🏽
I am currently waiting on money that is in the mail from a corporation I work for. I am buying the larger valves for a 7gph from Shawn. I just talked to him yesterday. I am really looking forward to getting it.
Obviously it's all going to depend on your maintenance. Make sure that after you are finished running chemical through it that you run water through it for at least 5 minutes. That's what I do after every wash. I don't wash every day so for me it should last me at least a full year or maybe even longer. But as far as the build of the system, I don't see any problems with it in the near future. These pumps though will eventually go out and they're inexpensive to replace
Your video is very helpful . I'm just starting out and on a budget . Hopefully I can just start with a 7 12v pump and one drum with 5o% water 50% bleach. Thank you Brother
Love your channel thank you for sharing! I’m lookin to get into the same business here in CT! How do you order this? I went to his site no option to buy.
@@cardinalprosoftwash thanks man will definitely subscribe, I'm new to the pressure washing business and just recently got some beginner materials . I'm looking to add a soft washing machine to do house / roof washing
When I bought this one they were around $900 I believe. The company has since modified the materials and components for a better system. budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump Use my code Cardinal for a discount!
Apex Pressure Cleaning. Shawn Alexander You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com Or call him at 810-284-2544 I believe they start at $850 let him know I sent you! 🤘🏾
Please post the information as to how to order one. I’m like you I’ve looked at all the big guys but they are out of my budget as I’m just starting off.
Apex Pressure Cleaning. Shawn Alexander You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com Tell him I sent you 💯
Apex Pressure Cleaning. Shawn Alexander You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com Or call him at 810-284-2544 tell him I sent ya 🤘🏾
@@cardinalprosoftwash What do you do when your location is snowed in.. for a job? Do you make enough during the main season for PW to pull through.. or you do another job too that pulls you through until you can get back out and PW?
I will be using 2 rachet straps in a van. The base is very solid and has good weight to it especially with the battery installed so it doesn't want to move around very easily. I will be shooting a video soon of the installation process so stay tuned for that 💯
I went to Apex pressure cleaning BUT it doesn’t show where to order?? All it talks about is the service they do….do they have a store???? They need to update their website to order equipment…
The guys down at Texas pressure washing shot a video of the soaker gun with two seven gallon per minute pumps and it was awesome but I don't think I would suggest it with just one seven or one five gpm. I get more distance with the self-wash wand
Apex Pressure Cleaning. Shawn Alexander You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com Or call him at 810-284-2544
speaking of cameramen, have you ever thought of using a camera "Tripod" for your camera? Can't belive that many people have not thought of this being used to film as they work. And it costs less than hiring a FT camera operator.... on some spots in your video.....
I think it was like $850. I didn't get the upgrade model with 7gpm pump or the more expensive metering valves but he can build that as well. Tell him we sent you 💯
Apex Pressure Cleaning. Shawn Alexander You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com Or call him at 810-284-2544 let him know I sent ya 🤘🏾
Sure but doesn't everything have a life span? These typically last an entire year for me and at $125 it pays for itself. The very first time a job is completed. I recommend running straight water through it. After every wash you should be good to go 🤘🏾
Apex Pressure Cleaning. Shawn Alexander You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com Or call him at 810-284-2544 I believe they start at $850 let him know I sent you! 🤘🏾
Man! I've been researching forever to try to find the best softwashing system for my needs and this seems to be it! Plus since it's mostly prebuilt, that helps a lot! Although, I have a question. Could I void the water drop stick and just pull water from my pressure washing buffer tank instead? (and what size tank should I use for SH?)
Depends on who you ask🤣 I've seen it mounted either way but I prefer this direction because if anything goes wrong this way will save your pump because the water will just fall to the ground rather than inside the mechanism 🤘🏾
Hey my good man I love your professionalism on RUclips I am a subscriber I just became can you show a video one day how you how you set up this new software system have like that cuz I don't have big tank so hot it can you show a video one day how you have that setup you know I only do things out of my pickup truck I don't have no big scared I don't have no $30,000 scared I mean I know we doing at small mobile yeah I would love to see your system of the software system you got I like it a lot I might buy one but I need to know how to set up is cuz I don't even a few tanks on the 55 gal or probably sometimes
Sorry misspelled words what I mean is kids like you know these big $30,000 pressure washer systems I'm no need to spend all that money I want to know the new software system you just bought how do you set up how did you set up can we see it on video this possible or send me a video
That may be an option but unnecessary for me as it only weighs about 15 lb. Very easy to move around but I won't be needing to move it very often if ever
I think you said you paid $800 for that I don't know man that's kind of expensive I'm like you I'm just starting out I don't want to spend a lot of money I'm going to do one better I'm going to build my own system if I build my own system I can do it for 2 to 300.00 I'm looking to keep my calls way down
Yeah I paid like $850 and that was last year I believe now they're up to like $1100 I didn't start with this though, I just used downstreaming to clean everything and now that I want to get into some heavier work, the softwash system is more necessary. Let me know how you pieced together at $300 soft wash system as I look at it right now. 5 gallon per minute pumps are around $125 and 200 ft of hose is going to cost you nearly another $200 but I assume it could be done. Can't wait to see the results 🤘🏾
FYI: not a good filter to use as I heard a lot with those the sh will break that screen down quickly causing orange rust bits to quickly develop contaminating your sh and clogging your pump.
@@jdurrant421 thanks! But I have heard from several accounts that this gun will not work with a 12 volt system. So I also have the standard PVC gun with the ball valve. www.toolbarn.com/products/general-pump-yg1635swh
I would do that if I didn't have multiple tanks. That is called batch mixing and the downfall of batch mixing is that you cannot adjust the strength of your mix. By having the proportioner I can adjust the strength of my mix for multiple surfaces. Therefore, if I am washing a vinyl house, I might use less than a 1% mix, whereas if I were cleaning a roof, I might use as much as a 6% mix. Hopefully this helps 🤘🏾
@@davidintili6647 but if a soft wash system isn't in the budget I would recommend an Xjet. It comes with proportioners and will allow you to spray a stronger mix than downstreaming.
I believe because when doing so, chemical loses its strength depending on time it is mixed with water. Lasts longer if only mixed when needed. Now if you have 3 jobs a day everyday then I get it.
Wouldn’t connecting that pump to the mixing valve with hard pipe give it better flow than the flow restrictions of those barb fittings?
This is a low psi (60) machine so the restriction is negligible. The kit also includes an adapter for standard water hose fitting so the choice is yours. I have no issues with flow using the 1/2 in. Diameter barb though🤘🏾
budgetsoftwashsolutions.com/
Use my code Cardinal for a discount!
I would love a 1 year update on those penta valves. I have seen so many crack, but it could be that the person over tightened. Looks good, but did it last?
The pent valve, by what I hear, work well but are kinda fragile. Remember the pumps, no matter what brand, make them about a season and need to be replaced or rebuilt. But this setup is very cost-friendly to get our foot in the door.
Nice upgrade, as you said yourself, you have to let the business pay for each upgrade. Smart thinking my friend. Get after it. new sub here.
😲 No way bro thanks for the sub!! I've been watching your videos and learning from you for the past few years man so I'm ready to do this 💯
The system looks super good. Do you have any videos using it in real life? How does it work?. Thank you!
ruclips.net/user/shortsd0N59RLl2PQ?si=v0DLSQDxVYFHATnS
Im excited for you bro. Nice set up
Thank you! If you are interested, go to budgetsoftwashsolutions.com use my code Cardinal for discount!🤘🏼
And also one big thing how do you keep your pump from overheating man I know there's something that you could bypass but I mean I don't have no time to be filling up with water constantly for it to not overheat what do you do please thank and also what State you from
Are you referring to the 12v or pressure washing pump?
Can you add a link to the same system in the video I need one . Thank you
budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
Use my code Cardinal for a discount! Thanks for commenting
How did the pump work being mounted vertically? I want to mount mime to a wall
It works great this way. Either way works but this is the way I recommend mounting it because if anything goes wrong and it springs a leak it will leak onto the floor rather than down into the motor🤘🏽
Excellent question!
Looks nice! I've been looking to either DYI or find one. Do you have a link for his site?
budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
Use my code Cardinal for a discount🤘🏾
I am currently waiting on money that is in the mail from a corporation I work for. I am buying the larger valves for a 7gph from Shawn. I just talked to him yesterday. I am really looking forward to getting it.
Awesome! I now own the gen2 system with the larger valves and I love it! 🤘🏾
Use my code Cardinal for a discount 🤘🏾
What surfactant do you use, that customers love the smell of?
Purex detergent. It is great!
Could you send the link to that manufacturer please.
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Tell him I sent ya 🤘🏾
@@cardinalprosoftwash will do boss thank you
@@ThERealist2019 +1 810-284-2545 you can call him as well
How do you get a prebuilt system like this?
budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
Use my code Cardinal you will receive a discount 🤘🏾 thanks for commenting!
We’re do I find this system
budgetsoftwashsolutions.com/
Use my code- Cardinal for a discount! Sorry for the late response. I didn't see this message. Must have slipped through the cracks
Great video
Thanks you! 🤘🏾
budgetsoftwashsolutions.com/
Use my code Cardinal for a discount
where'd you get it?
budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
Use my code Cardinal for a discount🤘🏾
Where did you buy that from?
budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
Use my code Cardinal in the checkout for a discount 🤘🏽
What’s the website or how do you order it
@apexpressurecleaning
How long did the soft wash system last ?
Currently running like brand new!
Obviously it's all going to depend on your maintenance. Make sure that after you are finished running chemical through it that you run water through it for at least 5 minutes. That's what I do after every wash. I don't wash every day so for me it should last me at least a full year or maybe even longer. But as far as the build of the system, I don't see any problems with it in the near future. These pumps though will eventually go out and they're inexpensive to replace
Your video is very helpful . I'm just starting out and on a budget . Hopefully I can just start with a 7 12v pump and one drum with 5o% water 50% bleach. Thank you Brother
You don't even need a 7 GPM. Just get the 5 GPM. It'll save you money and chemical🤘🏾
What was the name of the company you got your machine from
apexpressurecleaning.mi@gmail.com
Apex Pressure Cleaning (Facebook) tell Shawn I sent you
whats the name of the system u got there?
budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
use my code Cardinal for a discount!
Love your channel thank you for sharing! I’m lookin to get into the same business here in CT! How do you order this? I went to his site no option to buy.
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Tell him I sent ya
What is the link for this set up
budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
This is the Gen 2 version which they made improvements using aluminum and higher quality manifold parts. 🤘🏾
Use my code Cardinal at checkout for a discount 🤘🏾
@@cardinalprosoftwash thanks man will definitely subscribe, I'm new to the pressure washing business and just recently got some beginner materials . I'm looking to add a soft washing machine to do house / roof washing
That's where the money is💯
how much did you pay for the set up?
When I bought this one they were around $900 I believe. The company has since modified the materials and components for a better system. budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
Use my code Cardinal for a discount!
Where u at in Kentucky? Louisville here💪🙏
Same!
Do you have a link to this system?
budgetsoftwashsolutions.com/ Tell Shawn I sent you 🤘🏾
I 'd like to get that battery switch. Can you supply me with the brand? I appreciate you for that.
www.amazon.com/AWBLIN-Disconnect-Isolator-Vehicles-Application/dp/B094JTVLX4/ref=pd_aw_lpo_sccl_1/143-2589449-1881039?pd_rd_w=xHMHC&content-id=amzn1.sym.c7972a50-7bf3-4fc5-89c4-4ffd1f33c16a&pf_rd_p=c7972a50-7bf3-4fc5-89c4-4ffd1f33c16a&pf_rd_r=8HT0CM9REA5BQWDWJ2J7&pd_rd_wg=CtLdb&pd_rd_r=48cae83c-6e2e-408c-8a59-c22f6eaca518&pd_rd_i=B094JTVLX4&psc=1
Do you have a link for this product
apex pressure cleaning. shawn alexander
you can find him on youtube and facebook. here is his email address apexpressurecleaning.mi@gmail.com
+1 810-284-2545 or you could call him 🤘🏾
Where did you get the system and how much?
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Or call him at 810-284-2544
I believe they start at $850 let him know I sent you! 🤘🏾
Thank you
@@cardinalprosoftwashdonde puedo compra esa máquinas
Please post the information as to how to order one. I’m like you I’ve looked at all the big guys but they are out of my budget as I’m just starting off.
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Tell him I sent you 💯
Do you have a link
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Tell him I sent ya 🤘🏾
If anyone wants a proportioner I have one that the Power Wash Store sells. It has the GF valves and it's in a stainless steel box with a door
Yes I want one but no money yet just got started I've only had 3 job's so far. maybe next month I'll have 4 job's.
@Joe.grace want my number incase you want it. If I don't answer leave a message
Interested …. How do I get in contact with you
@t-roc I can send you my cell number. But I can't get into it until after 12pm tomorrow
Do you still have the proportioned?
Great video, can you link the system and the gun 🤙🏻
budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
This system comes with a gun. All you have to do is purchase a j-rod. They have those on the website 🤘🏽 use my code Cardinal for discount!
@@cardinalprosoftwash that white gun is sick tho, can you link
aaquatools.com/product/wash-down-gun-white/
Where you buy this at?
@apexpressurecleaning
where did you buy it bro
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Or call him at 810-284-2544 tell him I sent ya 🤘🏾
Where did you order it from???
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
I paid $850
Link to the system??
budgetsoftwashsolutions.com/products/generation-2-soft-wash-system-with-5-5gpm-everflo-pump
Use my code Cardinal for a discount 🤘🏾
So did you make a follow-up video on how you liked it? Love to see it perform
Unfortunately not yet, our city is covered in snow 😲 I'll post here when I put it to work🤘🏾
@@cardinalprosoftwash What do you do when your location is snowed in.. for a job? Do you make enough during the main season for PW to pull through.. or you do another job too that pulls you through until you can get back out and PW?
I have a day job. Pressure washing is part time for me for now until I get about 50k saved up
Then I'm going to Angi Ad's for clients
How do you fasten this to your skid?
I will be using 2 rachet straps in a van. The base is very solid and has good weight to it especially with the battery installed so it doesn't want to move around very easily. I will be shooting a video soon of the installation process so stay tuned for that 💯
Good video boss
Yo thanks for checking it out!
How do i purchase this brotha?
budgetsoftwashsolutions.com/products/5-5gpm-generation-2-soft-wash-system-with-gf-signet-metering-valves
Thanks for commenting, use my code Cardinal at check out for a discount!
Appreciate the info and walkthrough! Nice set up man!
Thank you bro!
budgetsoftwashsolutions.com/
Use my code Cardinal for a discount!
I went to Apex pressure cleaning BUT it doesn’t show where to order?? All it talks about is the service they do….do they have a store???? They need to update their website to order equipment…
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Tell him I sent you 🤘🏾
Yo let me know how the soaker gun work. Do a video when you get a chance. I asked Shawn if they’re compatible and he told me no
The guys down at Texas pressure washing shot a video of the soaker gun with two seven gallon per minute pumps and it was awesome but I don't think I would suggest it with just one seven or one five gpm. I get more distance with the self-wash wand
Where I can order this from?
apexpressurecleaning.mi@gmail.com email Shawn tell him I sent you!
Hell yea bro! Stoked for you!
Thanks! I can't wait until spring
@@cardinalprosoftwashsent me the link please and thank you
budgetsoftwashsolutions.com/
Use my code Cardinal for a discount sorry for the late response
How about a link man
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Or call him at 810-284-2544
Tell him I sent ya 🤘🏾
speaking of cameramen, have you ever thought of using a camera "Tripod" for your camera? Can't belive that many people have not thought of this being used to film as they work. And it costs less than hiring a FT camera operator.... on some spots in your video.....
Battery charger?
Yes, I use the Battery Tender Plus 1.25amp charger. I know a lot of guys on RUclips use Noco which work great as well so you could go either way.
What's the companies name...
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Tell him I sent you 💯
where u got it band for how much n
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
I think it was like $850. I didn't get the upgrade model with 7gpm pump or the more expensive metering valves but he can build that as well. Tell him we sent you 💯
Let me get the link
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Or call him at 810-284-2544
let him know I sent ya 🤘🏾
The drawback is that the pump needs to be replaced because it corrodes due to SH.
Sure but doesn't everything have a life span? These typically last an entire year for me and at $125 it pays for itself. The very first time a job is completed. I recommend running straight water through it. After every wash you should be good to go 🤘🏾
Video was very long couldn’t make it all the way through. Wondering how much it was$
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
Or call him at 810-284-2544
I believe they start at $850 let him know I sent you! 🤘🏾
Man! I've been researching forever to try to find the best softwashing system for my needs and this seems to be it! Plus since it's mostly prebuilt, that helps a lot! Although, I have a question. Could I void the water drop stick and just pull water from my pressure washing buffer tank instead? (and what size tank should I use for SH?)
Yeah bro, you could put the do sick into any tank 🤘🏾
Or to completely get rid of the drop stick. Just do a bulkhead on your water tank directly to the pump 🤘🏾
Nice set up you have
Thanks bro!
is it upside down?
Depends on who you ask🤣 I've seen it mounted either way but I prefer this direction because if anything goes wrong this way will save your pump because the water will just fall to the ground rather than inside the mechanism 🤘🏾
He raised the price $300 after seeing your video 😂.
Wow!! 😲
I'll reach out for a discount code. Thanks for the update
@@cardinalprosoftwash just joking about "seeing your video" but yes the price did go up.
Your price just went down my friend. If you want to buy the system put in code: Cardinal for a discount! Thank you for reaching out
Hey my good man I love your professionalism on RUclips I am a subscriber I just became can you show a video one day how you how you set up this new software system have like that cuz I don't have big tank so hot it can you show a video one day how you have that setup you know I only do things out of my pickup truck I don't have no big scared I don't have no $30,000 scared I mean I know we doing at small mobile yeah I would love to see your system of the software system you got I like it a lot I might buy one but I need to know how to set up is cuz I don't even a few tanks on the 55 gal or probably sometimes
Sorry misspelled words what I mean is kids like you know these big $30,000 pressure washer systems I'm no need to spend all that money I want to know the new software system you just bought how do you set up how did you set up can we see it on video this possible or send me a video
Open it first, then let us know “this is all that came in the box” 3:39
Nah..
mighty pricey
Supply and demand is the root of all evil 😭
But if you do decide to be one, be sure to use Cardinal for discount! 🤘🏾
He should have built it on a dolly so you can wheel it around.
That may be an option but unnecessary for me as it only weighs about 15 lb. Very easy to move around but I won't be needing to move it very often if ever
Just use a tripod. 12:37
Just let me do what I wanna do ya feel me
The blade hurts me.
@@kkutube1972 The Grinch needs an Oil change for sure 😂
@@kkutube1972 yo thanks for commenting! 🤘🏾
I think you said you paid $800 for that I don't know man that's kind of expensive I'm like you I'm just starting out I don't want to spend a lot of money I'm going to do one better I'm going to build my own system if I build my own system I can do it for 2 to 300.00 I'm looking to keep my calls way down
Yeah I paid like $850 and that was last year I believe now they're up to like $1100 I didn't start with this though, I just used downstreaming to clean everything and now that I want to get into some heavier work, the softwash system is more necessary. Let me know how you pieced together at $300 soft wash system as I look at it right now. 5 gallon per minute pumps are around $125 and 200 ft of hose is going to cost you nearly another $200 but I assume it could be done. Can't wait to see the results 🤘🏾
The pump is $200 proportioner is about 200 could build it yourself for way cheaper
Yeah but I was okay making this purchase. I've seen similar softwash systems sell for over $2,000 so I feel like I got a deal 😲
Opening the best softwash system with a shingle knife. 😂😂😂
You could've bought those parts yourself, and saved a grip of cash.....
FYI: not a good filter to use as I heard a lot with those the sh will break that screen down quickly causing orange rust bits to quickly develop contaminating your sh and clogging your pump.
The filter is only on the water line. Think I'm going to slot the PVC on the SH line 🤘🏾 thanks for the feedback
Where did you buy the gun from for your SW system. Awesome video
@@jdurrant421 thanks! But I have heard from several accounts that this gun will not work with a 12 volt system. So I also have the standard PVC gun with the ball valve. www.toolbarn.com/products/general-pump-yg1635swh
@@cardinalprosoftwash
Heard about this one with good reviews. Thanks I'll check out your link you sent also.
ruclips.net/video/tRH-SzrCcDs/видео.html
@@jdurrant421 yeah those apparently have a nicer trigger than the red wash guns but I'm sticking with mine for this season. Thanks for the link
Why not dump all your bleach chem and water in the same tank? Not meant from a spirit of debate. Great video btw
I would do that if I didn't have multiple tanks. That is called batch mixing and the downfall of batch mixing is that you cannot adjust the strength of your mix. By having the proportioner I can adjust the strength of my mix for multiple surfaces. Therefore, if I am washing a vinyl house, I might use less than a 1% mix, whereas if I were cleaning a roof, I might use as much as a 6% mix. Hopefully this helps 🤘🏾
@@cardinalprosoftwash it does. Great points
@@davidintili6647 but if a soft wash system isn't in the budget I would recommend an Xjet. It comes with proportioners and will allow you to spray a stronger mix than downstreaming.
@@cardinalprosoftwash why does downstreaming limit one? Bit new to this
I believe because when doing so, chemical loses its strength depending on time it is mixed with water. Lasts longer if only mixed when needed. Now if you have 3 jobs a day everyday then I get it.
Don' t buy that gun with that set up ...Im getting 15-20 ft tops , the gun might be over kill ...Im trying a j rod
How much was it and how do I contact him
Apex Pressure Cleaning. Shawn Alexander
You can find him on RUclips and Facebook. Here is his email address apexpressurecleaning.mi@gmail.com
$850