Hy WMA! At 19:32 you say we should be careful with the foil and not scratch it. What is this foil for? I've removed this yellowish foil and don't rly know why^^ should i replace it with something else? And what's this blue "foam" on the backside of the controller? I've removed it too 🙃🙈
That foil is to electrically insulate the mosfets. It is just kapton tape, you can also use mica. The blue foam is a thermal pad to help remove heat from the mosfets and transfer it to the body of the scooter.
hello, is there a solution to Data format error when trying to flash a US region g2 max, i have all the versions same like yours but the error comes when i click the start flash button.
Thanks for sharing. Very helpful! I have a Ninebot Max G30 from 2021. Could you recommend a place to buy a flashable controller (I am based in Europe)? Does the new controller you are using work in older models?
Cool video! I have Max G2 also, from withing EU so i switche the controller to one from Outside of EU then used the same settings in Scooterhacking, now it does 39km/h instead of 25, much better : )
Strange.. does your dashboard show the bluetooth sign? If yes, you are connected to the original app. So you need to unbind and then you can connect to shu
(V 1.7.6) I tried only V1 of your video and it didn't work, says {{"Flashing failed. Update failed! Reason: Data format error"}} looks like those who have the company controller updated are doomed to drive at 25 km/h for the rest of their lives 😂, I appreciate your efforts, I'm eager to try any other solutions that you find. Keep it up ❤️
Great video. Thank you. 2 quick questions: 1. Can one use the original Segway-Ninebot app after tuning? 2. Is there a way to change the scooter region using these tools? (I really just want to be able to use my EU models as they do in the US)
Hey mate, can these be set to 45-50km and still be safe and last etc? As in, in the video when you went to the speed section, you stopped it on the speed you wanted, but if we want it at around 50km is that possible? Thanks legend…
Good video, I would like you to make a video showing the parameters in scooterhacking so that the scooter goes better, one thing that I don't like about this scooter is that when it is at full battery it reaches 35kmh without problem, but when it goes down it doesn't even reach it downhill, could that be solved in scooterhacking?
kann man den Werksneuen Scooter als EU Version G2 Max E aus der Schweiz out of the box noch mit scooter hacking App benutzen, oder ist im Controller auch eine BLE vorinstalliert, die das verhindert?
@ Done! It goes like 33kmh on a free spin and like 30 when I’m riding it but I had to solder to the four pins on the back (I think first one was ground, two in the middle as you said and last one was 3.3V) happily it worked because on method you have shown I had an error “couldn’t connect to target” (also I had to change the wiring to 3.3V) But still tysm for the video:)
Great video, definitely do an in-depth video of settings inside the mod to explain not just the settings but the trade offs and the potential harm for any settings that are put too extreme. You could base it on standard settings like out of box, medium 30-40 no boost , high 40km/h+ extreme settings. If you can putting sections in your video so people can skip to i.portant parts for them if they rewatch.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Hy WMA! At 19:32 you say we should be careful with the foil and not scratch it. What is this foil for? I've removed this yellowish foil and don't rly know why^^ should i replace it with something else?
And what's this blue "foam" on the backside of the controller? I've removed it too 🙃🙈
That foil is to electrically insulate the mosfets. It is just kapton tape, you can also use mica. The blue foam is a thermal pad to help remove heat from the mosfets and transfer it to the body of the scooter.
How can i get cruise control as it is blocked where i live.
hello, is there a solution to Data format error when trying to flash a US region g2 max, i have all the versions same like yours but the error comes when i click the start flash button.
Having same issue
Having same issue
So do i need to open up the scooter or anything or can i just use the scooter hacking app?
Thanks for sharing. Very helpful! I have a Ninebot Max G30 from 2021. Could you recommend a place to buy a flashable controller (I am based in Europe)? Does the new controller you are using work in older models?
They can work. Not all of them do. So hard to recommend. Have you thought about using a tuning chip like I showed in my last G30 video?
can you please do for da Max G30 model 2021
Cool video!
I have Max G2 also, from withing EU so i switche the controller to one from Outside of EU then used the same settings in Scooterhacking, now it does 39km/h instead of 25, much better : )
Thank you🙏 39 is good but there is more possible😁
Hello,
I downloaded from the app from your website but for some reason my max g2 is not showing up on the software.
what should I do now?
Please help!
You must unpair your G2 from the Segway app first, and if you have enabled code start, disable it before unpairing your G2.
Strange.. does your dashboard show the bluetooth sign? If yes, you are connected to the original app. So you need to unbind and then you can connect to shu
(V 1.7.6) I tried only V1 of your video and it didn't work, says {{"Flashing failed. Update failed! Reason: Data format error"}} looks like those who have the company controller updated are doomed to drive at 25 km/h for the rest of their lives 😂, I appreciate your efforts, I'm eager to try any other solutions that you find. Keep it up ❤️
Thanks for the Update! Then go for the ST Link🙏 works 100%
@@wma_international where is the ST link? Pllss
Great video. Thank you.
2 quick questions:
1. Can one use the original Segway-Ninebot app after tuning?
2. Is there a way to change the scooter region using these tools? (I really just want to be able to use my EU models as they do in the US)
Thank you🙏 1.yes, 2.no. Wont work without ST
@ will it work with ST link though? If yes, how do I change the region/serial number?
Hey mate, can these be set to 45-50km and still be safe and last etc?
As in, in the video when you went to the speed section, you stopped it on the speed you wanted, but if we want it at around 50km is that possible?
Thanks legend…
45 is possible. But depending on the weight. 50 also but not really safe any more. I will post a Video with my settings
Good video, I would like you to make a video showing the parameters in scooterhacking so that the scooter goes better, one thing that I don't like about this scooter is that when it is at full battery it reaches 35kmh without problem, but when it goes down it doesn't even reach it downhill, could that be solved in scooterhacking?
Thanks🙏 yes I will make a detailed Video and share my Settings. It is normal that top speed goes down when voltage goes down.
Does it work with ninebot Segway f2? And what’s a good setting to go 40 without bricking the e-scooter?
F2 should also work. But probably not without ST Link. I will make a Video for the best settings
kann man den Werksneuen Scooter als EU Version G2 Max E aus der Schweiz out of the box noch mit scooter hacking App benutzen, oder ist im Controller auch eine BLE vorinstalliert, die das verhindert?
Du kannst es mit Xiaodash probieren. Da könnte es gehen. Andernfalls per Chip, us Controller oder ST Link. Mit Shu wird das wahrscheinlich nicht gehen
Does it break the scooter
When i want to start the flash it says
Failed data format error
Then go with ST
@@wma_international st?
brother do you sell any of these pre made ?
Sorry no. But you can order a controller for example on Aliexpress
Can you actually still use the official app?
Yes, just dont do updates
Sadly the xdash st link is not available anymore:(
Try this one:
xdash.etsy.com/listing/1731690149/xdash-nbclip-world-first-flasher-kit-for&coupon=JHU487W
@ Thanks. Btw already ordered ST Link and I found this attachment for 3D print so I’m gonna make it myself now for cheaper :)
☺️👍
@ Done! It goes like 33kmh on a free spin and like 30 when I’m riding it but I had to solder to the four pins on the back (I think first one was ground, two in the middle as you said and last one was 3.3V) happily it worked because on method you have shown I had an error “couldn’t connect to target” (also I had to change the wiring to 3.3V) But still tysm for the video:)
👍🫶
Great video, definitely do an in-depth video of settings inside the mod to explain not just the settings but the trade offs and the potential harm for any settings that are put too extreme.
You could base it on standard settings like out of box, medium 30-40 no boost , high 40km/h+ extreme settings.
If you can putting sections in your video so people can skip to i.portant parts for them if they rewatch.
Thank you 🙏 i will share my settings
@@wma_international yes plssss
Does it stil work?
Yes. But depends on your Firmware. But you can see my last Video. There I showed all options