Neumann MT-48 Interface for Voice Over

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 100

  • @MarkVO
    @MarkVO Год назад +6

    It sounds exceptional. Like an extra dimension was added to the sound. Really clear.

  • @gainandpain
    @gainandpain Год назад +5

    Looks cool ! Waiting for comparison between your old setup .

  • @markhicks5569
    @markhicks5569 Год назад +1

    Mark thank you. Just got mine. Playing with it to do simple broadcast and use it for things like zoom calls! It is so simple to use and drives my bcm104 flawlessly. I also noticed the transparency…have to listen very closely to hear difference. But it works flawless. It does get warm but agree only hear fan at start up. No touch screen lag. Please do some videos where you set it up and show how to get the best out of its compression, gate, limiter and eq. Oh and I should note I traded in my Apollo twin x for this beauty and could not be happier for the future of where this will take us.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      You’re very welcome! I can probably swing that at some point soon. Enjoy!!

  • @andrewglasmacher
    @andrewglasmacher Год назад +1

    Sounds fantastic, well done!

  • @John-tm2hw
    @John-tm2hw Год назад +1

    ...and you've discovered just how darned good the Anubis/MT 48 is. It's a very serious and flexible tool. Make sure that you save all your presets..also bus compression? Parallel compression? Bus EQ?! It's all in there. Don't forget the fact that you can record 2 tracks from the MT48, one with FX and one without. I'm a fan, have owned an Anubis for some time now and I just wouldn't part with it - unless it was for an MT48 because, frankly, there isn't anything better than this device, for this price. It packs a hell of a lot into a small package for not a lot of money (yes it's expensive but it *actually delivers the goods*)

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      Right? Yeah being able to track both pre and post effects is huge. Wow. So simple, yet so powerful and the routing is insanely comprehensive. So much still to learn. Loving it.

  • @jonlieberman997
    @jonlieberman997 Год назад +4

    congratulations on your setup. I am out on the road but my MT 48 is waiting for me at home. I also have a U89 and it is one of my favorites. What sort of shock mount are you using on the U89? My goal with this setup is to record acoustic guitar and vocals while on the road.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +2

      It’s a great combo. A match made in heaven. The shock mount is a Rycote Invision. Great versatile mount.

  • @LeBeautiful
    @LeBeautiful Год назад +1

    PERFECTION

  • @danielazulaivoiceover
    @danielazulaivoiceover Год назад +7

    3.6k plus taxes. I don’t know if I laugh or cry 😅

  • @zeitakulobusta
    @zeitakulobusta Год назад +2

    Lobster says 2 claws up!
    Would be great to compare dialing the exact same settings in to your UA box in just the vanilla plugs.

  • @PepPayo
    @PepPayo Год назад +2

    🔥 Wow Mark, this is a game changer! It sounds really amazing! My GAS is a bit lucky with the fact that Neumann hasn't included de-esser (YET). I would love to own one in the future and do a vs against my Rodecaster Pro II! Thanks again for sharing such great content! Greetings from Barcelona and have a nice day! 🖖

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      Thanks Pep! Greetings from L.A.! I probably should have included a G.A.S. warning at the beginning of the video. I’m subscribed, so I’ll for sure be watching! :)

    • @PepPayo
      @PepPayo Год назад +1

      @@MarkYoshimotoNemcoff Thanks to you Mark! It is a privilege to be able to enjoy the valuable content you share! The video is perfect like that! I hope I can incorporate it into the setup sooner rather than later! ;)

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      It is a privilege. So remember to eat your vegetables or no videos for you.

    • @PepPayo
      @PepPayo Год назад

      @@MarkYoshimotoNemcoff Yes dad, 5 times a day! 🍕🍔🍟🌭🍿 Ooooouch, I think that I failed with the emojis xD

  • @evrimusic
    @evrimusic 9 месяцев назад

    Hey Mark, thanks for the very informative and entertaining reviews!
    Can you recommend your prefered clone vintage U47/67 microphone around $600 US give or take?
    My main microphone is an AKG414 eb with c12 brass capsule, which I love and use for most applications, however, I would like to compliment that with another mic. My thoughts so far are hovering around JZ47/67 (which do you prefer to complement the 414eb) and 3u audio gz251fet. Would love to hear your thoughts.🙏

  • @Tav_cr
    @Tav_cr Год назад +1

    It sounds amazing. UAD has been the King of desktop interfaces for a long long time. I'd bet they are working an answer to this device right now or may I say I hope so. Thanks God for Competence. Everybody is saying the old king is dead, long life to the new king.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      UAD’s mediocre conversion has always just been accepted as a trade off because its DSP allowed it to do what nobody else could do, but now that native plugs have caught up, UAD is being exposed as a company seemingly without a roadmap. I have to believe they are working on something but I don’t have confidence right now that it will be next level worthy if and when it happens. Neumann has made it clear they are building an entire pro-level studio ecosystem.

    • @Tav_cr
      @Tav_cr Год назад +1

      @The Microphone Assassin It would be great if you could do a comp between the MT48 and your Apollo. No one has done that yet (at least I can't find it) and I think many people is expecting it.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      I will. It may not happen right away but it’ll happen.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      @@Tav_cr Just as a super quick test between them using the u89, I posted this over at the discord server. The difference is much bigger than I expected. discord.com/channels/1074099600211841086/1098619604932231272/1117916239533199490

  • @djb12DeepAcidHouseExperience
    @djb12DeepAcidHouseExperience Год назад +1

    Thanks Mark, I just got mine and hooked it up yesterday. I was about to try to get the DSP configured today and was wondering about how to set that up , so this video came out at the perfect time. What I do is a bit different than you. I do dj mix podcasts and I do voiceovers saying the track information artist, title, label etc. Thanks again! 😊

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      Brian, you’re going to love it. The on board EQ and dynamics are killer. It’ll be perfect for what you do.

    • @djb12DeepAcidHouseExperience
      @djb12DeepAcidHouseExperience Год назад +1

      @@MarkYoshimotoNemcoff awesome! I can’t wait to dig in after work today! I appreciate the reply and the videos you do! You and the booth junkie are the best channels on RUclips!

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      Thank you so much Brian! Check back and let me know how you like it!

    • @djb12DeepAcidHouseExperience
      @djb12DeepAcidHouseExperience Год назад

      @@MarkYoshimotoNemcoff I absolutely will man thanks again

    • @djb12DeepAcidHouseExperience
      @djb12DeepAcidHouseExperience Год назад +1

      @@MarkYoshimotoNemcoffI’m getting set up now. Do you use the -10db pad and the rolloff on your actual mics? What settings are you using on your gate and limiter?

  • @Truongchihai83
    @Truongchihai83 5 месяцев назад +1

    may I ask, which video application you use to keep the audio quality when you upload onto RUclips, your audio quality is so great, thanks

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  5 месяцев назад

      Thank you! I record my audio into my DAW, Twisted Wave, the same way I record audio for work. Then I lay that wav file into iMovie alongside the video.

  • @DailyRiot
    @DailyRiot 5 месяцев назад +1

    Hey Mark, have you tried any of the Audient interfaces?

  • @mixlikenix
    @mixlikenix Год назад +1

    The intro got me 😂 haha nice

  • @Jayrawk
    @Jayrawk Год назад +1

    I recently bought the Neve 88m which I absolutely love. The pre's and DI sounds excellent, and both run the the Marinair transformers. Sounds excellent with my Blue Blueberry, SM7 and Neumann TLM 67. It's also easy to use external pre's with the Neve 88m due to the inserts in the back. I am currently running the Neumann TLM 67 into a Neve 1073 into the return of the Neve 88m. Glorious sound, but almost to much color. I'm thinking the Neumann MT 48 may be the perfect match for the Neumann TLM 67 adding just the right amount of light color with its clean-ish hifi sounding pre's. I'd love to see a video of the TLM 67 direct into the MT 48. I think this may be a perfect pairing with color, clarity and hifi.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +2

      As it just so happens, the next video coming is the TLM-67 direct into the MT48. ;)

    • @Jayrawk
      @Jayrawk Год назад

      @@MarkYoshimotoNemcoff Looking forward to it.

  • @Ahmedbensalah1433
    @Ahmedbensalah1433 Год назад +1

    What does the reverb sound like? how much is it compared to Studio Pro quality? Do you think I can record reverb direct to track? or it's just for monitoring and no way to record it?

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      I never use reverb, so I'm not the one to ask, but yes, you can print reverb if you so choose.

    • @quachphucuong
      @quachphucuong Год назад +1

      How to print the mt48;s reverb? Thanks!@@MarkYoshimotoNemcoff

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад

      @@quachphucuong Check the manual. I’m not using the on board reverb.

  • @BillBene67
    @BillBene67 Год назад +1

    Sounds amazing Mark. Do you feel like this will be your go to interface moving forward? Apollo sitting idle? Yep, that would be great if they had a deesser too.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +2

      Yes, there is no doubt this is going to be my rig going forward. I can't see moving backward to the Apollo again. I have to really consider how Apollo is going to fit in going forward, if at all. Luckily, it's easy to de-ess on the back end, but I'm holding out hope they release the De-esser the Merging Anubis has at some point.

    • @mphatic
      @mphatic Год назад

      @@MarkYoshimotoNemcoff Yeah they have said they will be releasing it on their web site - with a few other choice things...Yeah you guessed it - I got one 2 days ago..falling in love with sound allover again..finally something that can deliver...

  • @TheRecordist
    @TheRecordist Год назад +1

    Wow! I'm getting sold more and more each day. It's you. It's you who's selling it to me. Hahaha

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      Trust me, you neeeeeeed one. I just did a quick 10 sec comparison of the MT48 with a comparable EQ, Compression and get on the Apollo through the stock preamp. It's on the discord server under Interfaces. It's nuts how different they are.

    • @TheRecordist
      @TheRecordist Год назад

      @@MarkYoshimotoNemcoff wow! That’s a very noticeable difference!

  • @jeffstewartauthor
    @jeffstewartauthor Год назад +2

    Clear as clean glass, man. Wow. Hey, how did you de-ess?

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      Actually, no de-essing. It’s just getting the top end of the 89 dialed in and me also working on physically restricting my sibilance during delivery.

    • @jeffstewartauthor
      @jeffstewartauthor Год назад +2

      @@MarkYoshimotoNemcoff Oh. Holy shit. Wish I knew how to do that. Haha

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +2

      @@jeffstewartauthor Still working on the technique and the easiest way to do it.

    • @jeffstewartauthor
      @jeffstewartauthor Год назад +2

      @@MarkYoshimotoNemcoff ​​⁠ No joke, I would buy this today, because it kills that weird blanket of Console, replaces the need for an external preamp, and it’s just killer, period, but the lack of a de-esser is all that keeps me from buying. I guess I could de-ess in post. I have RX, and I could also use the Precision afterward. I can’t believe how good this sounds. Like noticeably better, by lengths. I’m glad you featured this.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      @@jeffstewartauthor I've been de-essing in post for commercials and it's been great so it's a fast and efficient workaround. But yeah, the difference between this and my old sound is insane. The real secret is that this doesn't sound like most device preamps. It's on a whole different level.

  • @crazyKurious
    @crazyKurious Год назад +1

    Now, imagine hearing SV33 an high definition mic via this

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      I might teleport to another dimension if I did that.

    • @crazyKurious
      @crazyKurious Год назад

      @@MarkYoshimotoNemcoff I hear they are made to order, I use ProAudioLA for buying stuff. Where did you get these from ?

  • @JeffKellyMedia
    @JeffKellyMedia 10 месяцев назад +2

    Mark are you still using MT-48? Playing with idea getting one. Still on Apollo. Did Neumann put in De-easer? Hope you fire up the channel next year again at least for a once in awhile update if nothing else. If MT48 put in some noise reduction in real time I’ll buy one right this minute.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  10 месяцев назад +1

      Hi Jeff. Yes, still using the MT-48 every day. Apollo never gets used anymore. No Neumann de-esser yet but I’m hoping they’ll make it available after NAMM in January. You never know, maybe there could be a new video or something in 2024. Not ruling out anything.

    • @JeffKellyMedia
      @JeffKellyMedia 10 месяцев назад

      @@MarkYoshimotoNemcoff good to know. I’m not heavily invested in UA yet. So I may follow your lead with the MT-48. It’s only money. Haha Happy Holidays

  • @MixingMusicAnalog
    @MixingMusicAnalog Год назад +2

    The Mic has way more to do with the sound quality than that interface.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      🤣 Yeah, it’s not doing anything. Why bother?

    • @MixingMusicAnalog
      @MixingMusicAnalog Год назад +1

      @@MarkYoshimotoNemcoff thats not what I said. I guessed you missed my point.

  • @ryanlynch505
    @ryanlynch505 Год назад +1

    Will users be able to share SNAP presets with other users? Also did yours include any Snap presets or were they all blank?

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад

      So, it comes with no snapshots loaded, but it appears that in the web browser interface, not the desktop app, you can download and upload snapshots, so it would seem like you could share Snap presets! I'm glad you asked.

    • @ryanlynch505
      @ryanlynch505 Год назад +1

      @@MarkYoshimotoNemcoff that's awesome! So mine is coming in on Monday, can you share your voiceover preset Snap? Sounds great!!

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад +1

      @@ryanlynch505 I dropped the Snapshot file here at our Discord server. Let me know if it works.
      discord.com/channels/1074099600211841086/1076163556325720105/1118939022757212240

  • @soutopr
    @soutopr Год назад +1

    Where do you turn on the “side chain”?

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад

      It's in the dynamics window. When you activate it, it opens a prompt to ask what the sidechain input will be.

  • @cycotec1
    @cycotec1 13 дней назад +1

    Bro said quarter cup of ooh mami 🤣🤣🤣🤣🤣🤣

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  13 дней назад +1

      Revising my review to a half cup.

    • @cycotec1
      @cycotec1 12 дней назад

      @@MarkYoshimotoNemcoff a wise man through and through 😂💯

  • @ryanlynch505
    @ryanlynch505 Год назад +1

    Mark, is the built in preamp as good as the cranborne camden or is the camden on another level?

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад

      That’s something I plan to take a look at at some point soon. I’d love to use the Camden for line input 3 or 4 on the MT48.

    • @ryanlynch505
      @ryanlynch505 Год назад

      @@MarkYoshimotoNemcoff oh yea please do, would love a comparison of the two!!

  • @cubaseman1487
    @cubaseman1487 Год назад +1

    i want buy this. i use apohee quartet but i need new interface. i love neumann :)

  • @righteousone8454
    @righteousone8454 Год назад +1

    Excuse me, what?
    "You can't hear when I take out a compressor" and "not drastic"???
    This is night and day difference, all the bass in the voice goes away completely, and presence of the voice go bye-bye without compressor.
    I can easily tell in a blind test, and midrange gets pulled back with no dynamics ON

  • @MichelMusicien
    @MichelMusicien Год назад

    Latency test please..

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад

      That’s the beauty. Zero latency. You’re monitoring the live preamp while recording through live effects. No plug ins. Just real time live processing.

    • @MichelMusicien
      @MichelMusicien Год назад +1

      @@MarkYoshimotoNemcoff You talk about the latency of internal effects processing. I am talking to you about the ad|da conversion latency that you can see in the parameters of your DAW exp: 48khz at 64 samples.The roundtrip latency.

    • @MarkYoshimotoNemcoff
      @MarkYoshimotoNemcoff  Год назад

      @@MichelMusicien According to Reaper: 44.1khz - 24bit 32/16ch 512spls - 13/13ms. I only ever cut one track so I have the buffer set to ensure stability.

    • @MichelMusicien
      @MichelMusicien Год назад

      @@MarkYoshimotoNemcoff It seems really fast to me. Have you compared it to another audio interface. I just ordered the babyface pro fs because I am totally ITB. The newmann would have tempted me (Translated by Google ) I needed a fast audio interface, My motu 828mk3 stopped working....

    • @marmaladecreammedia
      @marmaladecreammedia Год назад

      @@MichelMusicien I have the babyface pro (not FS but basically the same thing). It's a great interface, you'll love it.

  • @beatprocess
    @beatprocess Год назад +1

    Nice brother