@3:55 make sure that blue/black tape COVERS the paper thin speaker slot! After installation cut a few small strips of paper and slip into the slot to make sure none of the gel went in there.
I was able to make it work! The first installation failed (uneven at the right edge); fortunately the kit comes with TWO protectors and extra glue, wipes, etc. The second time, everything worked like a charm. One thing you may want to address in your videos: the phone feels a bit gooey right after installation - I had to wipe off the edges of my phone several times, both before and after removing the protective tape. I was afraid that something had gone wrong - but it's all good. The tube contains a LOT of glue, probably more than needed. With the first installation, I had to redo my fingerprint. However, with the second install, the fingerprint scanner worked perfectly - no need to recalibrate. My Spigen Tough Armor case worked just fine with the new screen protector. Again, thanks for your helpful video!
White dome has always been great, I was disappointed not to have support for my 4xl. Glad to see it's back, this protector along with a dbrand leather skin and your set.
Tried Whitestone on my Pixel 2 XL and really didn't like it, but willing to give them another shot because the 6 Pro definitely needs more than just a matte film protector.
hello. The worst thing happened ) I purchased and installed whitestone dome glass on my Pixel 6 Pro on the second attempt, because the first time, when the last drops of glue fell out of the tube on the screen, I snagged the table and half of the glue from the screen flowed into the side of the phone. taking the phone off the plastic platform, some glue seemed to leak under the bottom edge of the main camera, right in the junction with the bottom of the case... the gap distance is about 0.5-0.7 mm. after thoroughly cleaning the smartphone with wipes and 90% alcohol, decided on a second attempt. By the way, the second glass set perfectly and I am very happy with it. However, now I'm worried about the disaster with the glue spilled under the bottom of the camera unit. The consistency of the adhesive is very oily and even on my fingers after alcohol wipes it turns into a light layer, similar to grease ( I do not want to imagine what will happen in the summer with this liquid inside the phone if it got there, because I live in a hot country and is projected a strong heating of the smartphone. advise, please, what is the best way to deal with this situation, if not yet take into account the service center? what is the risk of adhesive fluid getting inside the device?
Thats a nice Microfiber cloth, can you please link it? I ordered the pixel 6 pro 512gb on Dec 26th but its not due to arrive until the 1st or 2nd of February, but that's OK I can wait.
@3:55 make sure that blue/black tape COVERS the paper thin speaker slot! After installation cut a few small strips of paper and slip into the slot to make sure none of the gel went in there.
I was able to make it work! The first installation failed (uneven at the right edge); fortunately the kit comes with TWO protectors and extra glue, wipes, etc. The second time, everything worked like a charm. One thing you may want to address in your videos: the phone feels a bit gooey right after installation - I had to wipe off the edges of my phone several times, both before and after removing the protective tape. I was afraid that something had gone wrong - but it's all good. The tube contains a LOT of glue, probably more than needed. With the first installation, I had to redo my fingerprint. However, with the second install, the fingerprint scanner worked perfectly - no need to recalibrate. My Spigen Tough Armor case worked just fine with the new screen protector. Again, thanks for your helpful video!
White dome has always been great, I was disappointed not to have support for my 4xl. Glad to see it's back, this protector along with a dbrand leather skin and your set.
The first screen protector I've installed where it easy to not have dust and bubbles under the protector
Just pre-ordered mine a few minutes ago, can't wait to get this thing in
I got the oil in the speaker, now it sounds terrible.. any idea how to clean it?
omfg this thing is amazing 😱 thank you for the help 💪
Still waiting on mine for my pixel 6 thanks for the video
Tried Whitestone on my Pixel 2 XL and really didn't like it, but willing to give them another shot because the 6 Pro definitely needs more than just a matte film protector.
I just installed it. Got a bubble almost center of the screen that won't come out. Beyond that, it looks good.
I ordered a cheap one like this on Amazon, I’m going to test it out
Happy new year mr j
Finally this has come out. However I got used to using a matte install
Phone of the Year!!!!!!!!!!!!!!!!!
J- is this glass case-friendly? Waiting on my backorder and leaning toward a clear Speigen...
Has anyone tried it with a Caseology vault case? I've had issues with the vault pushing up other screen protectors..
Great product review. Thanks a lot
Wow,very different method from the kit that comes for the S21 Ultra
hello.
The worst thing happened )
I purchased and installed whitestone dome glass on my Pixel 6 Pro on the second attempt, because the first time, when the last drops of glue fell out of the tube on the screen, I snagged the table and half of the glue from the screen flowed into the side of the phone. taking the phone off the plastic platform, some glue seemed to leak under the bottom edge of the main camera, right in the junction with the bottom of the case... the gap distance is about 0.5-0.7 mm.
after thoroughly cleaning the smartphone with wipes and 90% alcohol, decided on a second attempt.
By the way, the second glass set perfectly and I am very happy with it.
However, now I'm worried about the disaster with the glue spilled under the bottom of the camera unit.
The consistency of the adhesive is very oily and even on my fingers after alcohol wipes it turns into a light layer, similar to grease (
I do not want to imagine what will happen in the summer with this liquid inside the phone if it got there, because I live in a hot country and is projected a strong heating of the smartphone.
advise, please, what is the best way to deal with this situation, if not yet take into account the service center?
what is the risk of adhesive fluid getting inside the device?
Thats a nice Microfiber cloth, can you please link it? I ordered the pixel 6 pro 512gb on Dec 26th but its not due to arrive until the 1st or 2nd of February, but that's OK I can wait.
amzn.to/3zlMKvV microfiber cloth
@@smartphoneconversations Thanks Dude.
Maaaaaan I'm still waiting on mines and I pre ordered it. I haven't got any info. 😡
Ordered mine on the 21st got shipping info today supposed to be here Weds can't wait Hopefully you get your shipping info before long 👊🏼
Are you about to take it off if needed?
You’re a pro!!!
I got tired of waiting. I got the pixel 6 pro mowei screen protector. Same concept. Probably a little cheaper
Nice and nice video