Deep Cleaning My ABANDONED Audi S3: Paint Correction & Ceramic Coating *Part 3*
HTML-код
- Опубликовано: 30 сен 2024
- Check out GTechniq’s range of coatings, including Crystal Serum Light & EXO so YOU can transform your car! CHECK IT OUT: bit.ly/Gtechni...
Subscribe to hampshirephoto here: bit.ly/29XJyib
Visit my shop here: bit.ly/2ROYRuo
---
Music:
Epidemic Sound: player.epidemi...
---
What I use to make my videos:
Main Camera: amzn.to/2N92jhj
Back-Up Camera: amzn.to/2jg6Dl0
Microphone: amzn.to/2jmi5vK
Tripod: amzn.to/2jiUlbw
Drone: amzn.to/2iNVeoC
GoPro: amzn.to/2jk7lhl
Back-Up GoPro: amzn.to/2AwHcPH
Laptop: amzn.to/2jlrZNR
Editing Software: amzn.to/2AvwYin
---
You can also find me on:
Facebook - / hampshirephoto
Twitter - / hantsphoto
Instagram - / hampshirephotography
---
Thanks for watching! :-)
Check out GTechniq’s range of coatings, including Crystal Serum Light & EXO so YOU can transform your car! CHECK IT OUT: bit.ly/Gtechniq-HP
Needs something to rejuvenate the plastics, especially on the rear bumper - will give it that extra bit of class 👍🏻
Yup exactly my toughts he should try car pro perl or autofinesse revive trim dressing to bring those faded plastics pieces back to life,and i believe they can be also used for tire dressing aswell
@brufa1 you should use solvent based sealants and dressings on exterior trim. Much better longevity than any water based products like Perl, which washes off. But they are more expensive.
Replace the number plates as there well past it and dragging the appearance down and get a good plastic restoring product and she will be even better
Nice you did this yourself, even better to have a nice clean dry place with good lighting to do the work.
Spread all the polish quickly on the lowest setting then turn it up. Stop getting it splattered everywhere, mainly splattered onto neighbouring panels
Great work looks like a different car
Keep nibbling away to make it factory fresh as you can with in reason
Love looking after older cars because they just keep going.
Great job thank you
Looking 100% better than was at the start of the project. Will the bumper not just clip back in and the section above the rear bumper sand down and cover with Carbon wrap ❤ you could do the same to the lower section of the rear bumper ❤
Far to much waffling I had to fast forward a lot
Wow! Great hard work transforming this S3. Enjoyable series so far. Looking forward to the next instalment.
Shame you didn’t restore the plastics. 30 extra minutes would’ve made all the difference
Un gran cambio amigo.quedo como un coche de 10 años.😂😂
Me parece que eres el típico joven que hace las cosas por hacer, es decir de forma poca profesional y sin muchas ganas. Podrías al menos haber mirado algún tutorial de como pulir un vehículo en tres pasos , y como retirar bien el recubrimiento cerámico. Nada más comenzar dejando el bote de recubrimiento cerámico en el suelo me dije: con lo despistado que es, seguro que lo tumba con el pie. Si una persona se acostumbra en hacer las cosas no perfectas o casi perfectas; se convierte en un hábito poco recomendable. No te lo tomes a mal, pero acostúmbrate en hacer siempre las cosas lo más perfectas posibles. Gracias por el video Lucas.👍
Nice job looks great
You should have worn gloves to avoid contamination 👌🏾
GLOVES!! 😢☠️💀
Car channels always do well when the presenter does the work rather than outsourcing to a sponsor. Great work 😊
Lets hope he doesn't turn to those brain dead raffles
@@derekporter66 oh no, now u say that I can see it happening!
Should do a Big Turbo VR6 build on this. Would be epic
Good video Luke. Shame it wasn’t in 4K though 😏 Detailing is definitely more your skill set. I’d recommend gloves with sealant use etc! The old Audi is coming up well though 👌🏼
need gloves when using coatings mate - you're transferring all the coating straight on to your clean cloths plus its really bad for you and will absorb through your skin. Also using wayyyyyyy too much ceramic coating - id get about 4 cars from bottles that size -few drips on the pad at a time not a few pippets. Also im sure when you moved it outside and in the daylight, unless you went through 50 or so cloths off camera you'll still have lots of coating residue/highspots - especially with the amount of coating you put on there and the Gtechniq coating is really bad for it in my experience. Looks alot better though
It's a future classic and worthy of spending time and money to properly fix t the paint , should have been done before the CC
Im amazed that soft pad on a da cut as well as it did on vag paint!
Ceramic coating a rusty car😅 so this is kind of a diy vid but u don't wonna do some diy rust repair🤔 so it basically is an ad for the car products.
This car needs an open air filter. It’s honestly the best mod I have done to my 1.8t. They sound so good
Fantastic job just mechanicals need sorting 👍🇬🇧👍🇬🇧
That looks awesome, I'd be proud of that, well done
Luke… what blower is that you’re using??
Man said 9 years ceramic coating.... 😂 come on bro
Much easier and less messy to start polishing without dabbing compound over the panel… it’ll still spread as far as you need it to if you prime the pad/panel on a lower speed before finding your cutting/refining speed. Secondly, I appreciate this is the first time you’ve coated a car but when “levelling” your coating with your initial cloth, do not swipe around in circles as you are essentially moving the coating rather than “working it in” - work over it in straight lines to remove the excess after it has flashed off and then use your second to take the remainder off which will inevitably leave you with no high spots and a flawless finish.
Thanks, i use a brillo pad and fairy liquid on mine, i will start looking into this, top man.
@@pb3382 advice is advice, if a Brillo pad and fairy liquid is your go to, you do you my friend 👍🏼
@@K70SLY 😂😂😂👍👍
It shines like a duck's head! ;-)
you need the c4 for platics!!
Top work fella, love that you’re doing the work yourself. As well as filming and presenting too, that’s some skill! 👌👌👍
Great job Luke. Love to see those plastic diffusers painted in the body colour (there is a video idea - rattle can resto). Love that car hoist too.
I love these s3s
Should've kept that mini wing 😂😂
I love detailing videos. More please
Awesome job, dude! Really well done!
Finally ! 👏🏻👏🏻