Build a 2x72 Belt Grinder with VFD from Amazon
HTML-код
- Опубликовано: 8 фев 2025
- In this video, I show how I built my own 2x72 belt grinder, a great tool for knife making, metalwork, and woodworking. I used plans from HouseMade, and I made some small changes to fit my needs. I’m using a 2 HP, 3-phase motor with a VFD (Variable Frequency Drive) for smooth and adjustable speed control.
A big thanks to HouseMade
for creating the amazing plans! It made the process much easier and fun.
► Link to Plans for the DIY Tilting 2x72 Belt Grinder ►► bit.ly/2Pa7JvZ
Let me know what you think in the comments, and check out the plans if you want to build one too!
If you enjoyed , please give this video a thumbs up and leave a comment below! Your support helps us create more content like this.
Don't forget to subscribe to our channel and hit the notification bell so you never miss a new video!
► check my other projects
Forging a katana from leaf spring
• Forging a KATANA from ...
Turning Rusty scraps of rebar into an ANVIL • Turning Rusty scraps o...
Forging a KATANA out of a COIL SPRING • Forging a KATANA out o...
🔔 Subscribe here 👉 / @aprestoration6640
Thank you for watching
#BeltGrinder #DIYTools #2x72Grinder #KnifeMaking
Angle grinder is one of the most valuable tools for metal fabrication shops, welding shops. Your belt grinder looks great nice work.
Thank you😀
Crazy what you can do with drill press, welder and an angle grinder. Really cool. Would have been really cool to overlay some plans here and there to see what the all the parts are for. Either way nice work! Cool video
Yes it is fun and there are a lot of pieces.similar to Jigsaw Puzzles But here you have to make the piece, measure it and then assemble it.
I'm glad you liked the video.Thank you
someone send this guy a plasma cutter and a mini-mill! well deserved after all that angle grinding and drill press effort
🤣🤣It would really be easier!But in the end, it was a great experience.
You know what tool would've sped up shaping all those peices, and made making that project much easier...?
...A belt grinder.
yeah, now I have one i can made another one faster!
Hi how are you? What substance did you put on the iron to remove the rust and grease?
Hi
I am good thanks for asking what,about you
Its White vinegar
@
Thank you dear for the information
Welcome
What's the chemical that he's soaking the metal parts in?
Just white vinegar is available everywhere and cheap.But you must wait for 24 to 48 hours.
You should have put a warning on this video. I almost had a heart attack when I realised you were going to be hand filing the inside wild seams of that tubing!
It's okay I'm still alive! 😂😂
Your too poor to have a metal cutting chop saw? You don't need a grinder yet!
Didn’t realize tool choices determined wealth-guess I’ll stick to being 'poor' and actually building something while you’re 'rich' and just commenting.