I am really enjoying the set up and look forward to the launch party. Do you think there is a way to have a remote shut off for the SH so you do not have to go back to the truck each time you want to rinse? I normally do not run soap so I would want a remote shutoff to eliminate walking back to shut it off each time.
@@charlesc9989 Thank you. Great question. Yes, that’s the plan… but not exactly sure when. At this point I’m just trying to get to the launch without losing my mind. LOL
Hey Mike, I’m loving what I see with the cheap shot! Question will I be able to use it with my current soft wash hose and reel? I am currently using 5/8
Newbie question... I want a hot water bout 8gal a min. Can I run that as a cold water for residential driveways ,side walks.. I want the hot side for golf coarse machines and farm equipment
@@brandonjester3683 Are you asking if it will come with a drop stick? No sir. My suggestion is to insert the 1” hoses (provided) into the buffer tank and SH tank.
@@TheFreshRinse@mudfrog76 It would be best to gravity feed… less friction. You could attempt to mount high and pull, you might not get the best results
@@jayxhughes The greatest question anyone has ever asked. Yes. What might be best is to buy one, then have me deliver it at the retreat. I know of 3 others that will be doing this. Thank you sir.
That sounds like a plan. I will probably end up being number 4. When you do the release party video would you mind giving out the dimensions of the frame. I'm running out of an 8ft truck bed hoping I have room to fit this bad mama jamma on the rig.
I’m guessing, but probably close to 3 hours. Filming yaks while, so I’m not exactly sure. The driveway was a pain in the rear because of poor drainage.
@@jerryrobinson6286 Absolutely. Obviously the degree of stain (or whatever) will determine if great pressure is needed. But I rinsed this house with no problems. A few areas on the back gutter was rinsed with the 8gpm, while I had it out washing the rear patio.
I really hope that when you said "under $1500" you were comparing it to other market gas powered systems because without the motor/pump, just selling a frame, red gun, the plumbing, and manifold system should be far under that price. don't get me wrong, I'm by no means hating because it is impressive and I do really like how you did the frame. I have already built one myself and love it but I'm only like $650 in total including the motor/pump minus a frame setup like yours. I'd happily pay another $200-300 for a frame to route and mount everything all in one though. will you be considering selling just the frame and if so how much are you thinking?
@@jdm_justin Thank you brother. When creating a price structure on anything, my things come into play. The main thing is Lifetime Potential Value (LPV). This is when we consider how much money can be made over the life span of a product. This isn’t necessarily how we discover “price”, but rather how we discover “value”. Yes, the skid will be sold separately as well. And custom vinyl wrap to match your truck/logo/color scheme, etc…
@@TexasWatchman Several had the same issue. Sunday night 8pm est. it’s probably just as easy to know that’s when the site will go live. If there are complications, I do things Venmo or… whatever.
I wonder if you can use 3/4 zero g hose the collapsible style since it’s hooked up to the cheap shot with garden hose connector and the ball valve. Might be easier to pull around.
@@benderprofessionalservices9018 Great question. I think the thing to remember is, because it’s only pushing 60-70 psi, there isn’t enough pressure to keep the hose from kinking. Therefore the hose needs to be heavy enough to not kink or compress for just any reason.
@@leveragelifestyle8581 That’s a great question. I’m going to do some testing tomorrow. I’m thinking it’s about 8gpm. Too much for a water spigot. But as long as you have a tank 50 gallons or so, you should be fine.
Another amazing video by the Fresh Rinse King....
@@Woody-777 Thank you sir!
Welp, I guess I’m selling my 12v softwash box set up and opting for this one as it’s just so compact and efficient. What a game changer!
@@davelou23 I’ll be keeping my 12 volt as a backup. At least for a while.
Glad to see you using the 3/4" hose. i was holding off buying my hose until I saw your test. Thanks for the great video.
@@GlennBrightWash 3/4” is definitely the way to go!
@@TheFreshRinse Thank you Brother.
3 quarter hose good!
@@TheFreshRinse would 5/8 hose flow good to?
Awesome job Mike. I can’t wait to watch the success you are going to have with this.
@@toddwendling1300 Thank you for you support sir
😎 Thanks Mike! Looking forward to the future tests.
@@TheGoodLife62 Thank you brother. Hopefully tomorrow.
I am really enjoying the set up and look forward to the launch party. Do you think there is a way to have a remote shut off for the SH so you do not have to go back to the truck each time you want to rinse? I normally do not run soap so I would want a remote shutoff to eliminate walking back to shut it off each time.
@@charlesc9989 Thank you. Great question. Yes, that’s the plan… but not exactly sure when. At this point I’m just trying to get to the launch without losing my mind. LOL
Beautifully done as always Mike!
@@AdvancedSoftwashLLC Thank you sir
Cheap shot is doing a fine job
@@ScottTerry-yc4uu Thank you sir!
How are you switching to just water for a rinse?
@@decarlosgist2250 By turning off the soap at the dial. Hopefully offing remote system at some point.
what an awesome job to showcase this beast! Great video mike
@@WeberPowerWashing Thank you. I can’t believe I messed up the roof video
After putting one of these pumps together I'm glad I never went with a 12v these pumps work awesome can't wait to find out how long they last
@@stevewood3170 Very, very cool!
And I'm glad it's back to 80 degrees down here we were struggling😂
I’m so excited for next season! I’m going to put this on a trailer. I’ve contemplated a skid
@@rontaviussnipes3021 Very very cool. I’m excited too.
I love the footage taken of your hand stepping down the ladder. Legend💪🫡
@@tomalley798 I’m not sure what was taken me so long. LOL
Very impressive
@@powerfulimprovements Thank you sir
Does the SH run through the pump of the unit or is there another bypass that the SH runs through?
@@bzdude27 Yes sir, it’s “upstreaming”. Just like a 12 volt pump.
You’re the man Mike
@@joeallenpressurewashing Thank you sir!
That cheap shot is inspirational 🤓That thing can throw some gallons up there. Great video
@@gilbertlyon6594 That means a lot brother. Thank you
Hey Mike, I’m loving what I see with the cheap shot!
Question will I be able to use it with my current soft wash hose and reel? I am currently using 5/8
@@davidmcgee3824 Thank you. Great question. For optimal flow, 3/4” is very. But running it though your real shouldn’t be a problem.
Hey Mike great video. Did you rinse with the cheap shot .
@@jrodham5 Yes sir.
Newbie question... I want a hot water bout 8gal a min. Can I run that as a cold water for residential driveways ,side walks.. I want the hot side for golf coarse machines and farm equipment
I think your asking if you can run hot water through this machine. The answer is no. Let me know if you have any more questions.
nice video! about how many gallons of solution does a roof that size take and at what %sh?
Great question. It all depends on how bad it is. This one wasn’t so bad. Probably 10 gallons less.
Very nice!!!!
@@BB-nw5mt Thank you sir!
I’m definitely wanting the cheap shot instead of AR roof system
@@paulmanning1169 I would have never believed it, if I hadn’t seen it for myself.
can't believe how quickly you pre treated with this thing
@@WeberPowerWashing Yes. Quite amazing
DJ J-Money is ready for Sunday !!!
@@KentuckyWashPros Wouldn’t you be MC J-Money?
@ That’s fair!
Will your setup include the quick connect kit, or will we need to order that from Delta Suds?
@@gluedecke At this time, that will need to be ordered separately.
Where can I buy!
@@Nhpowerwashllc Sunday night we will have the launch party. 8pm est. Right here
Just had another 12v pump come broke I’m officially going to gas, can’t wait to get it!
@@johnwiggins3950 I’m excited to offer it!
i had a bleach pump. i used it once and i got shut what a waste of money. def. going to sheep shot.
Will it pull from a drop stick?
@@brandonjester3683 Are you asking if it will come with a drop stick? No sir. My suggestion is to insert the 1” hoses (provided) into the buffer tank and SH tank.
I’m wondering if I can use a avoid plumbing a line in to my water/SH tanks. By just using drop sticks…. Will it Self prime
Will this pump pull water if mounted up high or does it need to be gravity feed?
@@mudfrog76 Someone correct me if I’m wrong, but I’m thinking 8 feet or so. Forgive me if I’m wrong
@@TheFreshRinse@mudfrog76
It would be best to gravity feed… less friction. You could attempt to mount high and pull, you might not get the best results
Will you have any to buy at the retreat?
@@jayxhughes The greatest question anyone has ever asked. Yes. What might be best is to buy one, then have me deliver it at the retreat. I know of 3 others that will be doing this. Thank you sir.
That sounds like a plan. I will probably end up being number 4. When you do the release party video would you mind giving out the dimensions of the frame. I'm running out of an 8ft truck bed hoping I have room to fit this bad mama jamma on the rig.
How long did this entire job take you?
I’m guessing, but probably close to 3 hours. Filming yaks while, so I’m not exactly sure. The driveway was a pain in the rear because of poor drainage.
Will you be shipping outside the US? Little machines like this are hard and expensive to get in my country (Australia), our gears is expensive.
@@himynameis2739 Hey brother. I need to get things going first. I won’t say no just yet. But I can’t make any promises.
will the cheap chot be able to run your surface cleaner?
@@pressurewashingandhoodcleaning No sir. Not nearly enough pressure
Item # on the pump?
@@ClintonCountyDroneGuy I can Google it for you.
www.harborfreight.com/1-in-79cc-gasoline-engine-clear-water-pump-35-gpm-63404.html
What chemical are you using to clean all of these surfaces? New guy in the industry here, love the video!
@@AndrewValeri3 Great question. Sodium Hypochlorite. Thank you for watching
@ thanks for the reply. Best wishes for you and your business 💪
What all comes with it if you have to get the motor from ur local harbor freight?
@bryals68 Great question. Complete skid, metering system and full plumbing kit.
@@TheFreshRinse Nice
Can you rinse with the cheap shot?
@@jerryrobinson6286 Absolutely. Obviously the degree of stain (or whatever) will determine if great pressure is needed. But I rinsed this house with no problems. A few areas on the back gutter was rinsed with the 8gpm, while I had it out washing the rear patio.
How much is this system cost to buy
@@terrysmart6865 Still soon a final price. Under $1,500. You will still need to purchase the machine at Harbor Freight
Thanks might get back with you
Use a blower from top to bottom on the roof, not a pressurized water hose
@@eag8999 Thank you.
When will it come out do we know yet?
Whoops just saw it
@@johnwiggins3950LOLOLOL🎉
How long will it run on a tank of fuel?
@@WandWizardLLC Thats a great question. I only filled up once on this one, and I used it a lot. Not sure how much is left in the tank.
@ thanks for the info sir! 👍🏻
are your still washing or closed up
@@brian2100 I’m only washing for emergency cases, such as this nice lady.
I have no space on my skid for anything else....LOL
@@scottpratson7766 LOL I’ve never been accused of taking up too much space.
Launch party on RUclips?
Yes sir. Sunday the 15th
I really hope that when you said "under $1500" you were comparing it to other market gas powered systems because without the motor/pump, just selling a frame, red gun, the plumbing, and manifold system should be far under that price. don't get me wrong, I'm by no means hating because it is impressive and I do really like how you did the frame. I have already built one myself and love it but I'm only like $650 in total including the motor/pump minus a frame setup like yours. I'd happily pay another $200-300 for a frame to route and mount everything all in one though. will you be considering selling just the frame and if so how much are you thinking?
@@jdm_justin Thank you brother. When creating a price structure on anything, my things come into play. The main thing is Lifetime Potential Value (LPV). This is when we consider how much money can be made over the life span of a product. This isn’t necessarily how we discover “price”, but rather how we discover “value”. Yes, the skid will be sold separately as well. And custom vinyl wrap to match your truck/logo/color scheme, etc…
You’re just a real Thomas Edison these days.
@@Marty-zd2lm LOLOLOL It’s fun, for sure!
Great job!!! Bother
Thank you good man!
Mike - I tried adding my email to your website but I couldn't get it to work. How can I get my email to you?
@@TexasWatchman Several had the same issue. Sunday night 8pm est. it’s probably just as easy to know that’s when the site will go live. If there are complications, I do things Venmo or… whatever.
@@TheFreshRinse Sounds good, Mike. See you then. Oh, and also... I signed up for your 'Fresh Family' membership.
I'll take 10!
You can’t afford one!
You’re right! I spray water for a living. How about a half of one?
No Tree was harmed in the making of this video. Ok well maybe one Tree.
LOL Let’s hope not!
First comment!!
@@michaelbrick2921 Thank you my man!
@ I watch every video brother! To learn, support and laugh. Appreciate you brother 🤙🏼
Not to shaby Mike
@@rickwashek478 Thank you sir
Mike please can you contact me so I can get one at the launch!
@@Nhpowerwashllc Absolutely. Can you text me please. 513.235.8474
I wonder if you can use 3/4 zero g hose the collapsible style since it’s hooked up to the cheap shot with garden hose connector and the ball valve. Might be easier to pull around.
@@benderprofessionalservices9018 Great question. I think the thing to remember is, because it’s only pushing 60-70 psi, there isn’t enough pressure to keep the hose from kinking. Therefore the hose needs to be heavy enough to not kink or compress for just any reason.
@ ohhhh. Good to know. Thank you
What kind of water volume is required for that pump?
@@leveragelifestyle8581 That’s a great question. I’m going to do some testing tomorrow. I’m thinking it’s about 8gpm. Too much for a water spigot. But as long as you have a tank 50 gallons or so, you should be fine.