I want it so badly and have since Joseph's first video, but I think I'd have to upgrade my whole setup for a big enough buffer tank. Right now I only have a 55 gallon drum.
@@yz125rider2006You definitely can make it work off of that size. I run a 8 gpm pressure washer off a 65 gpm buffer tank and with the Hudson float inside it is probably 55 gal. For houses and roofs the fact is you are not on the trigger the whole time and the water catches up if house supply is adequate. Of course you can't just be willy nilly with the water but be efficient, otherwise you'll have to shutdown and wait.
Mike, thank you for the great content been a fan for a couple yrs. I appreciate your consistent dedication to the wash industry. Drum creek wash company, chesapeake VA.
New to this kind of stuff. Just making sure, it does come with the 79cc motor? All my lines are half inch on my soft wash skid can it be hooked up to my system? Great channel looking forward to your feedback. Thanks so much!!
My 12v pump has a camlock to it. I'm thinking of running camlock for this as well, and switching between the 2 when I need freely. Problem is my manifold and valves are 3/4". I'm curious on what flow I would get. Also have you throttled it down and tested flow for say roofs to see the output/spray pattern?
That looks great. You have definitely out wit your self. It can only progress from here onwards. Does that spinning thing you have it sitting on come with it? And also with the laminated vinyl decal, can I get Joe Deerys portrait image on it with the logo, “one pull baby”
Hey man order Some Biso Supply product, because you promoted thier product. Never got a call back just one text saying order shipped two weks latet notthing. Just make sure when give a company a sho and t put there in good a good stand company. Makes you look bad.
I want it so badly and have since Joseph's first video, but I think I'd have to upgrade my whole setup for a big enough buffer tank. Right now I only have a 55 gallon drum.
Same, I'm only running a 50 GAL buffer atm but hoping I can make it work for a bit
@@yz125rider2006You definitely can make it work off of that size. I run a 8 gpm pressure washer off a 65 gpm buffer tank and with the Hudson float inside it is probably 55 gal. For houses and roofs the fact is you are not on the trigger the whole time and the water catches up if house supply is adequate. Of course you can't just be willy nilly with the water but be efficient, otherwise you'll have to shutdown and wait.
Love it brother. I also love how you used your wife’s turn table for the demo.
Great job
Mike, thank you for the great content been a fan for a couple yrs. I appreciate your consistent dedication to the wash industry. Drum creek wash company, chesapeake VA.
Based out of Yorktown myself nice to see a fellow 757 washer in the comments. Hope 2025 is your best season yet!
Nicely done Mike! Congratulations on the skids!
New to this kind of stuff. Just making sure, it does come with the 79cc motor? All my lines are half inch on my soft wash skid can it be hooked up to my system? Great channel looking forward to your feedback. Thanks so much!!
Waiting for Sunday!!
@@yz125rider2006 Me too!
What brand are the metering valves?
Deluxe
My 12v pump has a camlock to it. I'm thinking of running camlock for this as well, and switching between the 2 when I need freely. Problem is my manifold and valves are 3/4". I'm curious on what flow I would get. Also have you throttled it down and tested flow for say roofs to see the output/spray pattern?
That looks great. You have definitely out wit your self. It can only progress from here onwards. Does that spinning thing you have it sitting on come with it?
And also with the laminated vinyl decal, can I get Joe Deerys portrait image on it with the logo, “one pull baby”
might have to try these on a few of our trucks.
@@jeremichoko8088 I’m happy to help my friend
Yo Fresh, can you hook up that water inlet that’s on the elbow to a buffer tank?
Skid cost?
What’s the minimum size (gals) buffer tank needed to run with this unit mike?
That's a good price mate. looks good mate well done.
@@nathanhill4855 Thank you sir!
What is the Psi ?
such a cool setup
@@cartersservices3134 Thank you sir!
See you Sunday!!
BOOM!
Iam getting one!
Thank you sir
Interested..how can we connect?
@@andrewshields986 Thank you. You have questions? Feel free to text at 513.235.8474
You guy go to take Paypal??
@@backyardgrillmaster2910 You can simply pay online
Hey man order Some Biso Supply product, because you promoted thier product. Never got a call back just one text saying order shipped two weks latet notthing. Just make sure when give a company a sho and t put there in good a good stand company. Makes you look bad.
@@backyardgrillmaster2910 I can’t control every aspect. Please continue to reach out to him.