Asus ROG Strix Z790-E | Unboxing and Setup
HTML-код
- Опубликовано: 11 сен 2024
- Setting up a Asus ROG Strix Z790-E with an Intel 13900K.
Enjoy the video? LIKE and SUBSCRIBE for more!
GET CONNECTED:
Twitter | / mannyocrity
Twitch | / mannyocrity
Militia Discord | discordapp.com...
Thanks for the video! Good info. I plan on ordering this one for the new system build. Currently running an Asus Formula VIII with an i7-6700k/1080Ti, which I was giving to the wife. Bought an Asus Strix DDR4, i7-12700k and 3080Ti for my new system. Then decided to give that setup to the wife. Ordered myself an Asus TUF DDR4, an i7-13700k, Asus TUF 4090. Returned the Asus TUF DDR4 and i7-13700k, ordered an Asus TUF DDR5, and an i9-13900k. Now planning on returning the TUF DDR5 motherboard and getting the Strix Z790-E. (all items still new in box, free returns.) Only have a few more parts to buy before the new builds start.
Update: Shipped the TUF Z790 this morning. Received the credit about two hours later. Z790-E arrives tomorrow. (very impressed with Amazon free returns and super-fast account crediting)
Fair winds and following seas to all.
Thank you so darn much for making this video. Waiting for this motherboard to arrive and your video helps with some initial orientation and caveats.
Great video! You've explained everything so nicely. This will be really helpful for me once I get my hands on my Z790-E after a month or two.
i love how you explained the m.2_1 sharing lanes with the PCIe. Most people do not explain it properly. But bro,,, you were kind of rough with that CPU installation, i was cringing the whole time
It would be better if you could shared detailed video on this video about rest of the things like coolers gpu connection to motherboard.
My research indicates that you don't want to use Slot 1 NVME 5.0, nor do you want to use slot 2 as it also drops the top X16 PCIE slot to X8 for the GPU. It should be installed in one of the Chipset M.2 4.0/3.0 slots. yes, it is slightly slower... but it won't be that noticeable if at all. I just bought this Motherboard for my Lian Li O11D Evo RGB Lamborghini edition build.😃
I wish this was made back in January. I'm currently building a new PC with this board and I have x5 4TB nvme drives.
I guess I'll have to take the one out of slot 1 so I don't hinder my ROG Strix 4090.
This was meant to be a machine for blender/z-brush with some video editing and gaming.
You moved your GPU to the PCIe 4.0 slot by the end of the video, I was hoping you'd leave it in the PCie 5.0 slot and run a test with the alternating PCIe switch on the motherboard to see if it hinders performance if switching through the different modes, auto, PCIe 4.0 and PCIe 3.0. Perhaps the PCIe 3.0 switch is a mode compatible for gen 3 GPU's? I would've thought that PCIe slots would be backwards compatible on the latest motherboards anyway and not require a switch that would enable you to chose 4.0 or 3.0.
Thank you for a detailed explanatory breakdown on the 16 lane PCIE, NVME M.2 slots, & 2 sticks of ram location. If you see my comment I would like to ask if you can make a follow up video about a benchmark update on this configuration? Also if u had to switch the button from default to 4.0 ? Thank you 🙏🏾🙏🏾🙏🏾 out of all videos about this MoBo, yours was the most helpful 🙏🏾🙌🏿🙌🏿
I did switch to 4.0, but not sure if I needed to.
Duuuuude!!! My builder messed up and installed my SSD right beside the 4090. Just downloaded CPU-Z to confirm that it is only using 8 lanes. Thank you! Been chasing BSOD issue and I think this is it.
Is the ssd gen 5?
Best video on it. Clear, good tuto. Thanks.
What drivers did you install for this motherboard?
What does it mean when it shares lanes with the gpu? Why dont you want to use that slot? Does it slow the gpu or m.2 down?
Basically it will share the lanes, so the 16 lanes are shared between the two slots. You most likely will not see any difference if the lanes are shared. It is more important if you are over clocking and trying to squeeze every ounce of power out of your rig.
Can you approve this, I’m building now my PC.
1) I got two M.2 PCI 4 NVMes (1TB and 2TB)
The correct way to install them is one m.2 (1TB)on slot 2 (for best cpu performance)
And one(2TB) in other 3-5 slots?
2) if I had M.2 PCI 5.0 NVMe only then put it on slot 1?
I got RTX 4090 if that matters
So is the F version much different from the E model? I'm wondering why the price difference is so huge
6 и 8 слоев соотвественно
Thank you for explaining where to install the M2 drives.
ah yes the bend the pins a little wiggle gotta love it
huh?
Where is the best slot for a single Pro 990 4Tb drive? This is all new to me. Last build was 11 years ago.
DAWG what kind of case and build is that 😭 why do i like it, looks so cheap but so good and smart
thermaltake core p3 case. They don't make many wall mountable cases.
Would you have the ddr5 ram fan blowing on the ram, or pulling the air away. Manual shows the ram fan as exhaust and the small vrm fan as intake(blowing down) or at least appears that way in the manual at 2.1.5 and 2.1.6. Thanks.
I'm stuck between getting this motherboard but I really like the gigabyte z790 aorus master I have a gigabyte windforce 4090 and i9-13900k this will be my first complete build so 🤞
It's been a good board so far. I'm sure you'll be good no matter which board you choose.
@Mannyocrity. Hey there. I got the same.e mobo. I needed some help. The cpu power connector sockets to the top left of the cpu socket. There's two 8 pin power sockets. Am I supposed to connect both of them to the psu or just 1 will do?
I just contacted ASUS about this and they said it doesn't matter if you use the M2 slot next to the PCI 5 16x slot. It won't slow either down. It's NOT in the manual either.
It shares the lanes, so it will go from 16x to 8x, so it is true that the lanes will not slow down, but you have less of them. They didn't lie, but didn't tell you the whole truth
@@Mannyocrity but GPU's don't even use all 8 lanes so that's why it doesn't matter? video talks like it will slow both items down.
@GeorgeMezori gpu will use all 16, it doesn't need to, but it will use them.
I have the same setup. Z790 E gaming with i9 13900k. But i cant get it to post. Only shows error code 00. I tried replacing the board and cpu with a replacements but issue still occurring. Brand new mobo and cpu just got it today.
I got the same board, updated the bios to the latest "as of this typing" it boots great, I installed two NVMe using slot 2 and 3 I'm using the TUF 4090 on slot 1 with 16x I connected the two cpu ESPs to the PSU and IDK if this is why I'm getting RGB flicker on the I/O display, it works fine while it's running but the flicker starts when I boot off or go into sleep and the shutdown effect goes on, currently I use starry night and it wont light up and just flickers, works fine with the other effect. What could be causing this? Should I disconnect one ESP from the PSU?
Super Helpful Video For Me.....
You May Have Saved Me 400 Dollars Bro Ty Sooo Mich
Thanks for the video. The manual for this MB is REALLY bad and hard to follow.
The 16 point pin holder for the power on the top left. Do you plug in two 8 point connectors or just one? I’m upgrading right now and I plugged in all 16 but now have no connectors for my graphics card.
I only plugged in one. The second one is really only needed if you want to overclock to give it more juice.
so you can only have 1 m.2 without slowing down the gpu? or all slots can be used expect for the top slot
nope, If you use the 5.0 slot it will share with the GPU in the 5.0 slot. The other ones do not.
No, you have 3 slots that you can use that don't share the lane with the GPU.
Oh so earlier today I bought the asus strix 790 for 275 bucks never used inside the box I found on Facebook market place apparently the guy I bought it from got his from a storage unit and he resells what he finds for profit did I make a good deal? Ok now that I finished the video the rgb on this motherboard looks sick I can’t wait to finish my computer build I would love some ideas for a graphics card
Hello, how you can start dram t force on 7200mhz??? I have 13700kf , gaming e z790 and tforce 6800 and bios dont start
(((
I got this board, but my old windows coul d not bootup....no system drive mesage in bios. I had to do fresh install. Also a driver 8s missing for something...i have downloaded all driver but still getting error messsage.
Can you do 128 gig of ram on this board ?
I can only put 2x16gb in slots 2 and 4. If I try to do 4x16gb I get the error code 55 on the board. I want to figure this out to get 64gb total.
did you use contact frame for not bend cpu. i have also the same motherboard with 13700k and noctua d-15 and i am worry about cpu bend
I did use one, but it is for better heat distribution. The board or cpu will not bend/break without it.
WHY DID YOU PUT THE NVME IN THE BOTTOM SLOT IT GOES CLOSEST TO THE CPU FOR MAXIMUM SPEED. THE BOTTOM SLOT IS AT A SLOWER SPEED.
I do explain why. 4:46
What is ur boot time on this board? Mines a bit slow at 35-40 seconds I have the same board i7 13700k, 32gb ram, and RTX 4080
Not that slow, but it isn't really fast either
How was it?
No driver disk and the downloadable drivers are useless.
Challenge - I have read/seen info that the sharing of the lanes for this port is not an issue as stated at this point in the vid "ruclips.net/video/tMljXfWQDwU/видео.html". Some say this will never be an issue due to the bit rates and speed of the channel versus the ability of the vid sys to demand bandwidth...
Clarify??
i just bought a pc with this motherboard and it has the m.2 in m.2_1 so would i just be able to move it into m.2_2? so i get x16 on my gpu and i also bought an extra m.2 drive so would i be able to put that one in m.2_3 and have everything be okay?
also what does it mean if an m.2 is ran off the chipset like you said like is it still gonna be good if i put an m.2 in those slots? sorry for the questions i appreciate the help🤝
Did you move the m.2 to the first slot with the change of the GPU?
no, I'm use the second slot starting at 5:56 you'll see the slot I install the m.2
Ok I would assume that if you got a gen 5 m.2 you would want to use the first slot and use the pcie 4 slots for the GPU.
@@OTTNext yes
The WD BLACK with the heatsink it's too thick to install the cover I can't not close now lol
I bought one with heatsink and one normal
It will be okay the normal nvme without the cover with heatsink? Please some help
You can use the motherboard supplied covers which have heatsinks, or you can just use the ones that come with the NVMe. I believe you could also take the heatsinks that came with your NVMe off and just use the ones that came with motherboard. Up to you.
So what about cooling? I have the Z690 F and i have tower cooling but doesn't fit so i need to put AIO, is there an option for other or just AIO cooler for the CPU? :/
Should be able to fit any time of cooling you want. I have AIO, but an air cooler should fit as well.
@@Mannyocrity I have tower cooling but the pipes are hitting on the upper thingie on the motherboard ..idk how its called ...and cant go down so i can screw it (sorry for the English ) its AS500 from DeepCool.
2 CPU power connectors required for the motherboard Rog Strix z790-f gaming WiFi II?
Typically, you only need to plug in both cpu connectors when you are planning on over-clocking and need more voltage.
I must respectfully disagree with your statement regarding the installation of the M.2 drive in the M.2 - Socket (2) on the ROG STRIX Z790-E. Based on my understanding, the M.2 - Socket (1) on this motherboard is directly linked to the CPU, resulting in lower latency and optimal performance compared to the M.2 slot connected to the chipset. Therefore, I would recommend installing the M.2 drive in the M.2 - Socket (1) for optimal performance. I hope this information proves useful to you.
slot 1 and slot 2 are connected to CPU. I am positive on this. slot 1 shares the 5.0 lanes.
rog.asus.com/motherboards/rog-strix/rog-strix-z790-e-gaming-wifi-model/spec/
Total supports 5 x M.2 slots and 4 x SATA 6Gb/s ports*
Intel® 13th & 12th Gen Processors*
M.2_1 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 5.0 x4 mode)
M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
Intel® Z790 Chipset**
M.2_3 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
M.2_4 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
M.2_5 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode & SATA modes)
4 x SATA 6Gb/s ports
your gain is massive lmao
too loud? funny thing is I also get people telling me some videos are too soft. Can't really win.
@@Mannyocrity nah People can also turn down the volume, just hear a lot of feedback from the gain being up so high is all
@@Mannyocrity your video did help me Im building my new PC and this is the motherboard I have so tanks there
You plugged just one 8pin connector on the mobo?
Yes, you only need one cpu EPS plugged in. The second one is really there for overlooking. The single one will draw enough power even for a 13900
@@Mannyocrity Ah bless! I was stressing about it! lol THank you!
Does it no come with stand-off screws? Do we buy them separately?
The standoff screws should come with your case.
@@Mannyocrity in the box? Or inside the actual case? And thank you.
Depends on case. Sometimes they are already installed and other times they are in a separate bag
@@Mannyocrity I found them. Strixt really knows how to hide them lol. Thank you.
Is the Ryzen 7 5800x compatible with this motherboard?
Nope, you'll need a Motherboard with an AM4 socket. This has a 1700 which is intel.
@@Mannyocrity Thank you.
Hi, I have ASUS ROG Strix Z790-E Gaming 1 WIFI Mainboard Sockel Intel LGA1700, will it be compatible with i7 14700K?
yes, because it is a 1700 socket
@@MannyocrityI installed new cpu i7 14000k and this motherboard, pc booted up into bios asking to configure new cpu, went into bios to change the fan error to ignore. After doing so, pc game me blue screen of death. After restarting to uefi, reset settings, rebooted, now pc turns on the off immediately. Any fix or solution?? Tried resetting ram. Made sure all connections are made. Updated bios with flash drive and flashback, cleared cmos, removed mobo battery. Re did thermal paste. Pc just turns on then off right away.
Not a good comparison the 13900k against the 3900x
I was upgrading my PC, so it is the comparison I had.
I'm about to do the exact same build tomorrow, and I'm re-using my nvme drives, i have a 980, which has my windows 11 on and a 970 for etc stuff. My question to you is, when i install my 980 in slot 2, and when i boot up, will it go straight to windows? Or do i need to go into the bio's and have it reboot via my USB stick, which has windows 11 install boot and do a fresh install? Thanks in advance if you answer this for me!
It should boot right up.
Had to go to boot menu for mine to change boot drive but that’s all.
I had no idea that there was a PCIe 5.0 Graphics card made yet. RTX 4090 OC or Non-OC are PCIe 4.0.......Bottle neck
If I was going to mount that on my wall I would have used all 90 degreee cables on the back. That looks ugly.
Beauty is in the eye of the beholder
Anyone having slow bootup time on Asus z790e? Mine takes 40 seconds from power button to windows login
(970 Evo plus)
-on latest bios and startups disabled
im having the same issue at the start when i first built my pc it was super fast to loadup and now takes 40 seconds. not sure what happened
You skipped some steps
Which ones?