All these clips showing some good, hard working people, amaze me with how little the owner puts into their protection. One guy was correcting the burrs, making fiberglass dust, but he was wearing no safety glasses, no mask, the one painting was wearing no mask and safety glasses etc. Even some very cheap ones will save a few years from their lives or at least the pains of some nasty illnesses some years from now.
This kind of factory exist in many poor country😢… Those poor employee dont have much choice… The one to blame are the owner…they didnt care about their worker at all.
Probably the safest conditions I've seen in these types of factories, but they would probably be better off covering their faces with those sandals with all the fiberglass dust and chemicals floating around.
Whoa! Handmade, artisanal motorcycle helmets. I'll bet those are way more expensive than those overpriced and over tested helmets I see at my dealer. If you don't mind eating through a straw after your wreck, I'd say these helmets are for you!
Нормальный стеклопластик как сталь а добавить угле волокна ,кевлара то будет прочнее стали. Я в 1979 г. делал шлём у гаража, матрицу сделал из армированного гипса и соеденив половинки хомутами и проволокой, намазал эп. смолой , накидал тряпок, вставив в неё волейбольную камеру, накачал воздухом, это лучше чем они просто мажут, ( меньше эпоксидной смолы, шлём легче и прочнее, нет дефектов на нём. Хотел ещё накачивать горячею воду вместо воздуха и в матрицу эл. спираль для нагрева и быстрого отвердения смолы.
@@happer2009HJC comply with strict safety standards. Do you see these Pakistani made eggshells withstanding a collision with a car at 10kph? Enjoy concussion or brain damage.
Like many I was appalled at the lack of control over the production of something designed to save lives. I have ridden motorbikes for over 50 years, and, I will admit, occasionally used "cheap" helmets, but they have always met the relevant safety standards. I tried to find a price for these, but couldn't specifically find this make - however I did discover many "unbreakable", "maximum protection", full face helmets selling new for Rs1000 (Pakistani) and at current exchange rates this is ... less than UK£4.00!
Bought mine for around 600pkr in Pakistan... I have to admit it has saved my life once... I had a pretty bad crash going around 50kmph and it saved my head... I broke a collarbone though... The helmet I have is different than these ones,mine has more foam inside and better outer shell
The main reason why many survive in India and most of Asia is because of how slow we travel. Even with some good highways in between, the average I get when I travel for 600km a day is just over 65kmph. If we all were to travel at 100+ kmph (average), these helmets and in fact our vehicles would prove to be useless. Things are slowly changing and companies have started selling safety as a feature. That's progress from where it used to be.
@@ArunBasilLal I'm sure that most of the buyers for this helmet wouldn't be travelling terribly fast, as you say, so the apparent flimsiness of the helmet isn't an issue.
@@fawziekefli2273 Correct. Accidents do happen (the most dangerous one is the visor breaking and becoming a projectile by itself rather than shattering away). We are more concerned about people wearing any safety equipment and also following traffic rules.
Зато его купят. И для полиции отмазка. Шлем есть ? - есть. Молодцы что работают а не бездельничают. На одной пьяной вечеринке ( 1922 год ) пьяному скульптору показали 4х цилиндровый мотор снятый с машины и спросили. - СМОЖЕШЬ СДЕЛАТЬ ТАКОЙ ?? Через неделю рядом с мотором стоял точь в точь такой же мотор и даже местами красивее. Но почему то он не заводился! ( Ильф и Петров )
Они нутрянку на клей приклеивают, на КЛЕЙ Карл!!!!! Не говорю уже об остальном. Это не шлем, это какая то аццкая залипуха. Уж лучше бы улицы мели, чем людей подставлять таким говном.
Это получился композитный материал из стекломата и смолы в пару слоёв. Довольно прочный и лёгкий материал устойчивый к ударным нагрузкам. Таким образом уже давно делают всевозможные корпуса, части машин, рамы велосипедов, военные шлема и части бронежилетов(только слоёв побольше). Даже арматура есть из стекловолокна
Нормальный стеклопластик как сталь прочный и легче её а добавить угле волокна ,кевлара то будет прочнее стали. Я в 1979 г. делал шлём у гаража, матрицу сделал из армированного гипса и соеденив половинки хомутами и проволокой, намазал эп. смолой , накидал тряпок, вставив в неё волейбольную камеру, накачал воздухом, это лучше чем они просто мажут, ( меньше эпоксидной смолы, шлём легче и прочнее, нет дефектов на нём. Хотел ещё накачивать горячею воду вместо воздуха и в матрицу эл. спираль для нагрева и быстрого отвердения смолы. В магазине шлём из стекловолокна дороже и прочнее чем из пластика, дома он получается недорого, ( несколько ненужных тряпок и 100 грам эпоксидной смолы.
Эта технология была описана в журнале МК ещё в году 79. Я тогда тоже попробовал сделать себе шлем, первый вышел конечно корявенький)😏 Но по тем временам такой купить было не реально.
Я в 1979 г. делал шлём у гаража, матрицу сделал из армированного гипса и соеденив половинки хомутами и проволокой, намазал эп. смолой , накидал тряпок, вставив в неё волейбольную камеру, накачал воздухом, это лучше чем они просто мажут, ( меньше эпоксидной смолы, шлём легче и прочнее, нет дефектов на нём. Хотел ещё накачивать горячею воду вместо воздуха и в матрицу эл. спираль для нагрева и быстрого отвердения смолы.
Yikes! I feel for these guys breathing in fiber glass and resin/epoxy/paint. I was taught once you hit/drop your helmet even a few feet it renders it subpar for a crash. And them hammering away making holes in it... omg!
I wish someone try to make these helmets with some standard. Human life is not cheap, we need to teach the people to use proper helmets. Life is more important then aesthetics,😢 what most people don’t understand.
I’m seeing a lot of this videos and are wonderful jobs they do but also a risky one. It’s seems like the employer don’t provide the employees safety equipments for them. Hope this young people never die because of cancer, incapacitated for hot metal burning and handling without proper shoes. Feel worried but at the time they want to work and give their family at least one meal a day.
It's not always the employer to blame. Employees don't want the "hazzle" or "inconvenience" of using safety equipment more often than you think. Wearing a normal surgical mask is uncomfortable, as you can relate from our recent pandemic. Having to wear safety masks, googles and ear protection in the hot and often humid weather is hard. Workers don't care about their long term health as much as we would think. There is a car workshop nearby where they rebuild car bodies. I saw this guy sanding off filler material and spray painting without wearing any mask. I immediately went to my car and offered him two face masks and told him what sort of danger he is in. He wore it for the time being. When I went back to get my car, the masks I gave him was no where to be seen and he was back to doing his job. Gave me an awkward smile when he saw me. Since I knew the owner of the garage, I talked to him about the situation. He took me to a shelf and showed me good quality 3M masks (the kind that you see in breaking bad with huge filters on it) that the workers had access to, but were refusing to wear. These masks are expensive and imported in India. The owner wouldn't have invested in them if he didn't care. But how much can he tell his staff to wear it? My Dad being an Engineer often provides safety equipment to people who work in our household. He is unpopular because he makes carpenters wear masks during sanding. My Dad is relentless and often gives them long lectures on safety. They don't like it.
@@ArunBasilLal , да. Люди поступают глупо. Они видят что ты не умираешь сразу, значит маску можно не носить. А что будет через 10-20 лет мало кого волнует.
I’ve never seen anything so scary in my life. just unbelievable I really hope that they keep these in India or Pakistan. the trouble is there is motorcycle protective clothing coming in to the uk saying they are genuine bike clothing like agv and arai and there rubbish the industry needs to stop them .
I know it's easy to say that these kinds of cheap bike helmets are also manufactured in India, but believe me, we don't make helmets like this. In India, helmets must meet the ISI safety standards, which is mandatory for any helmet. The helmets you're seeing in the video are from Pakistan. Most people in India buy helmets that exceed the ISI standards. For example, mine is an Axor Apex, which meets ISI, DOT, and ECE 22.05 standards. While some people do buy cheaper helmets, even those must have ISI certification, so they’re not like the ones in the video, which are handmade without proper safety standards in Pakistan.
Нормальный стеклопластик как сталь прочный и легче её а добавить угле волокна ,кевлара то будет прочнее стали. Я в 1979 г. делал шлём у гаража, матрицу сделал из армированного гипса и соеденив половинки хомутами и проволокой, намазал эп. смолой , накидал тряпок, вставив в неё волейбольную камеру, накачал воздухом, это лучше чем они просто мажут, ( меньше эпоксидной смолы, шлём легче и прочнее, нет дефектов на нём. Хотел ещё накачивать горячею воду вместо воздуха и в матрицу эл. спираль для нагрева и быстрого отвердения смолы.
This are not helmets, they are devices to keep your gray pudding in one place, so it will be easier to clean the streets... I admire craftsmanship and ability to make things done in these conditions. But thin glassfibre shell with styrofoam is a death trap...
It’s a death trap for those workers too. They’re working without gloves and face masks and they’re painting without any protection. They’re lucky for being still alive.
To all the haters. If the exact same helmet was done in a western country in the exact same way, you would have called it ' luxury handmade artisan helmet '
Gayet güzel, insanlara düşük butceli ekipman ikmani tanıyorlar. Kendileride bu işi yaparken ekmek yiyorlar teşekkür ediyorum biz fakir ülkelere ürünü sunanlara
Ага, видел такие каски в продаже в середине 1990-х... Не знал, что их ещё производят, и где!!! Да в каких условиях! По сути это панамки, в которых башка раскалывается вместе с самим шлемом...
I've watched and read ALOT of the comments here about the lack of control of building a "correct" helmet... Well first let me tell you about myself... One...i used to be a motorcycle cop 40 years ago and have ridden Harleys and other vintage bikes going back to the 1920's... But yes i have too say that i most likely wouldn't use one of these helmets if i could help it ... As a cop i saw ALOT of deaths because of improper head gear... Like those "German" looking helmets... One of the worse for accidents...but i guess their trying to make a statement... Now two ... I've also now been a cameraman for over 40 years and have been all over the world 🌎 shooting movies and shows... But I've also been to Packistan and actually seen some of these along the roadside manufacturing shops for all sorts of things... And its sad how they have too work...and for pennies to keep living... I did find out that alot of these helmets are sold just locally to motorbike people...but some i sure make there way all over the world... What i really wish... Is if i had ALOT of money... I'd like to buy these small places the high tech correct equipment to build a really fine piece of safety equipment and where they don't have to bend over on the floor all the time... I mean i had a couple of old Corvette's and had to redo some of the fiberglassing and even with gloves 🧤 on i got some in me... I couldn't think how calest their hands must be to do it without gloves... But that's just the conditions their in... And for those of you that would say why don't i... if i have the money put a factory together in the U.S. too make helmets... Yes i would do that...the U.S. comes first in my book and always has... Charity begins at home i know... But too help those who need it... wherever it is...helps... No one has too tell me that... I'm also an ex-combat photographer like my dad was in the Navy in WWII... God love him and my mom... But i wish I could do alot... Third thing i didn't say is that right now I'm dealing with PTSD and cancer...so that's what I get... Oh hopefully I'll make it through... But this is just my thoughts on what I'd do if i could...
Entiendo y estoy claro que estos señores trabajan muy artesanalmente con herramientas muy rudimentarias y simples pero con mucho ingenio y esfuerzo.!!! Lo que no entiendo es por qué trabajan siempre en cuncliyas y en el suelo, para todo o casi todo lo hacen en el suelo y eso a mí parecer es más cansón y complicado.!!! Porque no usan mesas de trabajo????
![How to Make a Forged Carbon Fiber Helmet [DIY] (Making Split Mold & Helmet)](http://i.ytimg.com/vi/z6gbHq8MGNE/mqdefault.jpg)
I think after reading all these comments this company should stop manufacturing.😂😂😂
Creating safety helmets while your production line, people are not protected from fiberglass and poisons being sprayed. Shame!
Can I get the location of this factory if it is in Karachi-Pakistan, I require some helmets
Where is this store so that we can avoid it.
😅😂
Не смешно бро
Habla por ti , y no por todos,!!
Amazon 😂
Maybe this hamlet is for tricycle.
All these clips showing some good, hard working people, amaze me with how little the owner puts into their protection. One guy was correcting the burrs, making fiberglass dust, but he was wearing no safety glasses, no mask, the one painting was wearing no mask and safety glasses etc. Even some very cheap ones will save a few years from their lives or at least the pains of some nasty illnesses some years from now.
The irony of a dude making protective gear in flip flops
Wahnsinn! Ein Schutzhelm gemacht ohne Schutzkleidung - auf ein langes Leben!
Охрана труда и производства на уровне каменного века🙈
За то свое) у нас даже такого производства нет, один Китай
Эта каска расколится вместе с головой.
У нас так же делали шлемы при совке, лет 40 назад.
@@sahLES Не расколется. Несколько слоев стеклоткани это достаточно прочно.
А как ещё сокращать население? Их же там уже - четверть миллиарда. Одна надежда - на химию и на эти же шлемы. )))
Я представляю картину как закрученный болт визора отвёрткой при ударе заходит в голову
Ну ничего, теперь Визер встроенный
Dot,ece,snell and Fim cert helmets.very cool and quiet too no air vents needed and removable seal foam in the neck
Sad to see these workers handling the fibreglass without any gloves or safety equipment.
Worker and bikers both have bad ends
I guess they are robots! 😂
Wonder if anyone lives past 30 in that factory? Good on them for wearing their safety sandals at least lol.
Some look 31 😗
@@leadsolo2751 thats from working there, the ones that look 31 are actually 11 years old.
Steel toe capped sliders!
This kind of factory exist in many poor country😢…
Those poor employee dont have much choice…
The one to blame are the owner…they didnt care about their worker at all.
Probably the safest conditions I've seen in these types of factories, but they would probably be better off covering their faces with those sandals with all the fiberglass dust and chemicals floating around.
This is very common in Pakistan, people buy because these are cheap and affordable. They do not pass any quality checks.
So pretty much the "Good Luck" helmet. Youll need good luck in order for them to protect you in an accident.
@Ricardo Silva 🤣alternatively are well tested under various ISO parameters to hide your identity during crimes!
वाह, यह आश्चर्यजनक है कि आप ऐसा करते हैं। 😄😄
Gando
The share price for Shoei and Arai has dropped like a stone since these helmets hit the market.
The users of these helmets are probably dropping dead like stones as well
Kon jaiga
Whoa! Handmade, artisanal motorcycle helmets. I'll bet those are way more expensive than those overpriced and over tested helmets I see at my dealer. If you don't mind eating through a straw after your wreck, I'd say these helmets are for you!
😂😂
После крушения ваша голова отдельно от тела будет питаться через соломинку.
Так что тут вопрос только в опознании трупа.
Awesome and reliable product I am also user of muhafiz halmet.
Great
I am also
I hope you are both joking. This helmet will not protect you at all.
"Oh, my head!"😅
😳,macam² product gayezzzz...👍
3 мм стеклопластика все же могут защитить голову при скольжении по асфальту, а может и от удара об него. Все лучше чем без шлема.
Там ещё пенопластка и поролонка
@@user-wh3mz3gm8r + 5% к защите - 100% к штрафу
Хреновый шлем своим куском ещё и бошку пробъет
Нормальный стеклопластик как сталь а добавить угле волокна ,кевлара то будет прочнее стали. Я в 1979 г. делал шлём у гаража, матрицу сделал из армированного гипса и соеденив половинки хомутами и проволокой, намазал эп. смолой , накидал тряпок, вставив в неё волейбольную камеру, накачал воздухом, это лучше чем они просто мажут, ( меньше эпоксидной смолы, шлём легче и прочнее, нет дефектов на нём. Хотел ещё накачивать горячею воду вместо воздуха и в матрицу эл. спираль для нагрева и быстрого отвердения смолы.
Shoei, Arai and Shark helmets are quaking in their boots now! 😂
Зачем я купил себе hjc i100? Надо было этот брать.
@@happer2009HJC comply with strict safety standards. Do you see these Pakistani made eggshells withstanding a collision with a car at 10kph? Enjoy concussion or brain damage.
Top quality right there.
Not mentioned, but these helmets are soley for sport bike riders.
Like many I was appalled at the lack of control over the production of something designed to save lives. I have ridden motorbikes for over 50 years, and, I will admit, occasionally used "cheap" helmets, but they have always met the relevant safety standards. I tried to find a price for these, but couldn't specifically find this make - however I did discover many "unbreakable", "maximum protection", full face helmets selling new for Rs1000 (Pakistani) and at current exchange rates this is ... less than UK£4.00!
Bought mine for around 600pkr in Pakistan... I have to admit it has saved my life once... I had a pretty bad crash going around 50kmph and it saved my head... I broke a collarbone though... The helmet I have is different than these ones,mine has more foam inside and better outer shell
@@abdulbarshams9564 plz contact me
The main reason why many survive in India and most of Asia is because of how slow we travel. Even with some good highways in between, the average I get when I travel for 600km a day is just over 65kmph. If we all were to travel at 100+ kmph (average), these helmets and in fact our vehicles would prove to be useless. Things are slowly changing and companies have started selling safety as a feature. That's progress from where it used to be.
@@ArunBasilLal I'm sure that most of the buyers for this helmet wouldn't be travelling terribly fast, as you say, so the apparent flimsiness of the helmet isn't an issue.
@@fawziekefli2273 Correct. Accidents do happen (the most dangerous one is the visor breaking and becoming a projectile by itself rather than shattering away). We are more concerned about people wearing any safety equipment and also following traffic rules.
Это пипец.😮
Нихрена этот шлем не спасёт.
Зато его купят. И для полиции отмазка. Шлем есть ? - есть. Молодцы что работают а не бездельничают. На одной пьяной вечеринке ( 1922 год ) пьяному скульптору показали 4х цилиндровый мотор снятый с машины и спросили. - СМОЖЕШЬ СДЕЛАТЬ ТАКОЙ ?? Через неделю рядом с мотором стоял точь в точь такой же мотор и даже местами красивее. Но почему то он не заводился! ( Ильф и Петров )
Дурака, конечно нет!
Они нутрянку на клей приклеивают, на КЛЕЙ Карл!!!!! Не говорю уже об остальном. Это не шлем, это какая то аццкая залипуха. Уж лучше бы улицы мели, чем людей подставлять таким говном.
Это получился композитный материал из стекломата и смолы в пару слоёв. Довольно прочный и лёгкий материал устойчивый к ударным нагрузкам. Таким образом уже давно делают всевозможные корпуса, части машин, рамы велосипедов, военные шлема и части бронежилетов(только слоёв побольше). Даже арматура есть из стекловолокна
@@Inox-qt5sn а на что ее надо клеить?
Hello, what materials are used to make the helmet?
Нормальный стеклопластик как сталь прочный и легче её а добавить угле волокна ,кевлара то будет прочнее стали. Я в 1979 г. делал шлём у гаража, матрицу сделал из армированного гипса и соеденив половинки хомутами и проволокой, намазал эп. смолой , накидал тряпок, вставив в неё волейбольную камеру, накачал воздухом, это лучше чем они просто мажут, ( меньше эпоксидной смолы, шлём легче и прочнее, нет дефектов на нём. Хотел ещё накачивать горячею воду вместо воздуха и в матрицу эл. спираль для нагрева и быстрого отвердения смолы.
В магазине шлём из стекловолокна дороже и прочнее чем из пластика, дома он получается недорого, ( несколько ненужных тряпок и 100 грам эпоксидной смолы.
Creative video maker...true legend
Great and very safety helmet. 😃👍🏻🇵🇪
I wonder how safe are those, do they have any certificates?
Yeah they certify that they leave the store when you buy...... do you really think there is any certificate on these? Have you seen the video
D only certificate u get will be a death certificate after an accident..
I've always wanted to see the Shoei factory and how it's made. Very nice 👍
😂
Stress Test ka kya, are they safe enough to withstand accident?
NO!!!
I like the way he's showing the helmet off LIKE WE ARE SUPPOSED TO BE IMPRESED .....
Is this for safety or to avoid fines.. apalling quality and standards
y luego diran que este casco te salvara la vida desde el 2014 llevo 3 cascos de confianza y a partir de ahora voy a mirar de donde se fabrican
quitale las esponjas y mira como viene hecho por dentro el plastico asi te daras mas cuenta
Si no quieres fallar, compra AGV, SHOEI, NOLAN, ARAI, .... ETC.
Were they wearing steel toe safety sandals?
1993 год, два знакомых парня делали шлемы по такой технологии, продавались очень хорошо.
Эта технология была описана в журнале МК ещё в году 79. Я тогда тоже попробовал сделать себе шлем, первый вышел конечно корявенький)😏 Но по тем временам такой купить было не реально.
Are theese helmets as safe as theirs safety sandals?
very nice,,,, hardwork! watching fr phillippines
Я в 1979 г. делал шлём у гаража, матрицу сделал из армированного гипса и соеденив половинки хомутами и проволокой, намазал эп. смолой , накидал тряпок, вставив в неё волейбольную камеру, накачал воздухом, это лучше чем они просто мажут, ( меньше эпоксидной смолы, шлём легче и прочнее, нет дефектов на нём. Хотел ещё накачивать горячею воду вместо воздуха и в матрицу эл. спираль для нагрева и быстрого отвердения смолы.
Safety left the chat🙂
Yikes! I feel for these guys breathing in fiber glass and resin/epoxy/paint. I was taught once you hit/drop your helmet even a few feet it renders it subpar for a crash. And them hammering away making holes in it... omg!
Очень вредное производство. И без средств защиты. Дикость!
moron tyler😂
Que marca de casco es?
Para no comprarlo en la vida.
Que condiciones.de.trabajo son esas?
Amazing Work
Ab is helmet me kya riders ka sarr save rahega..
Thanks for this workers which are providing helmet and saving lives and their families thanks🌹🙏
Good job❤
Tá safe com esse capacete 😊👍
No😂
I wish someone try to make these helmets with some standard. Human life is not cheap, we need to teach the people to use proper helmets. Life is more important then aesthetics,😢 what most people don’t understand.
And the life of these poor workers...without any safety filters, gloves etc 🤦🤦🤦
@@BPantherPink Yes, terrible ….. 😢😢😢
Problem is there are nut cases who want to buy these cheap useless helmets. When the buying stops the selling can too!!
@@BPantherPink lllxdbrjq.B dh eukmfe6ík999999😂99))))))))))))))))))))))))))++?12)9¿....*da,cdcrexx,r,re,',z67787gy7667😊😅😮😢🎉😂❤😊😅
Iikaz900P)7o😊😊
are bhai to aap mehenga wala le lo .. SABKA budget alag hota h
I’m seeing a lot of this videos and are wonderful jobs they do but also a risky one. It’s seems like the employer don’t provide the employees safety equipments for them. Hope this young people never die because of cancer, incapacitated for hot metal burning and handling without proper shoes. Feel worried but at the time they want to work and give their family at least one meal a day.
It's not always the employer to blame. Employees don't want the "hazzle" or "inconvenience" of using safety equipment more often than you think. Wearing a normal surgical mask is uncomfortable, as you can relate from our recent pandemic. Having to wear safety masks, googles and ear protection in the hot and often humid weather is hard. Workers don't care about their long term health as much as we would think.
There is a car workshop nearby where they rebuild car bodies. I saw this guy sanding off filler material and spray painting without wearing any mask. I immediately went to my car and offered him two face masks and told him what sort of danger he is in. He wore it for the time being. When I went back to get my car, the masks I gave him was no where to be seen and he was back to doing his job. Gave me an awkward smile when he saw me.
Since I knew the owner of the garage, I talked to him about the situation. He took me to a shelf and showed me good quality 3M masks (the kind that you see in breaking bad with huge filters on it) that the workers had access to, but were refusing to wear. These masks are expensive and imported in India. The owner wouldn't have invested in them if he didn't care. But how much can he tell his staff to wear it?
My Dad being an Engineer often provides safety equipment to people who work in our household. He is unpopular because he makes carpenters wear masks during sanding. My Dad is relentless and often gives them long lectures on safety. They don't like it.
@@ArunBasilLal , да. Люди поступают глупо. Они видят что ты не умираешь сразу, значит маску можно не носить. А что будет через 10-20 лет мало кого волнует.
@@HarryMcKew Exactly. Very hard to educate them and can't blame them either. It's a tough situation.
Европейцы , выросшие в тепличных условиях , просто в шоке от увиденного 😂😂😂
@@garagedayschannel , дикари ! Да мы в детстае так же делали. А уж про 70-80гг вообще молчу.
Bohot maza aaya ye video dekh ke
Are these for a movie?🤔
Hai Good Morning wow Super Helmet Super idea Super job Super finish ing Super item in Kerala also you Sail❤ it Good 👍👍👍👍👌👌👌🙋♂️🌹🌹🌹🌹🌹Super
Title should be "how death traps are made, helmet edition"
Recommendad for slot or scalectrix racing.
Nice bicycle helmets!
Did you mean, tricycle???👀
Что? Перчатки, маска? Не, не слышал! 😂
I have a helmet made in 1966 by BELL and its still in mint condition.
I’ve never seen anything so scary in my life. just unbelievable I really hope that they keep these in India or Pakistan. the trouble is there is motorcycle protective clothing coming in to the uk saying they are genuine bike clothing like agv and arai and there rubbish the industry needs to stop them .
I know it's easy to say that these kinds of cheap bike helmets are also manufactured in India, but believe me, we don't make helmets like this. In India, helmets must meet the ISI safety standards, which is mandatory for any helmet. The helmets you're seeing in the video are from Pakistan. Most people in India buy helmets that exceed the ISI standards. For example, mine is an Axor Apex, which meets ISI, DOT, and ECE 22.05 standards.
While some people do buy cheaper helmets, even those must have ISI certification, so they’re not like the ones in the video, which are handmade without proper safety standards in Pakistan.
Quality at its top
My question is how did they make the mold for the helmets....
Buy a new helmet > grease it up > resin + fiberglass > cover just half of the helmet > and the other half after hardened
My scalp is still itching...
Why do you gel coat when you are painting anyways?
Sir helmet me kaan ke liye chote chote hole banaye jisse riding comfortable ho helmet na lagaane ka sabse bada kaaran kaan me sunaai na dena
I don’t think the mould itself would even pass a drop test 😬
😭😂
ECE certified for sure!
Filler and paint make me the critical life-saving safety device manufacturer I ain't.
6:58, filling included "strain relief hole" for your smooth finish :P
it would me more useful to show the materials names
Делали мы так. Давно это было. 😃
This helmet protects smart brains.
Super bro Hatsof ur concept but quality is very poor plz do emprovement and quality
Какие мотоциклы - такие и шлемы ! 😉😂
Нормальный стеклопластик как сталь прочный и легче её а добавить угле волокна ,кевлара то будет прочнее стали. Я в 1979 г. делал шлём у гаража, матрицу сделал из армированного гипса и соеденив половинки хомутами и проволокой, намазал эп. смолой , накидал тряпок, вставив в неё волейбольную камеру, накачал воздухом, это лучше чем они просто мажут, ( меньше эпоксидной смолы, шлём легче и прочнее, нет дефектов на нём. Хотел ещё накачивать горячею воду вместо воздуха и в матрицу эл. спираль для нагрева и быстрого отвердения смолы.
Can we see the clip when they get FOX racing stickers put on 😄
Why do they work on the floor all the time ?.
It would be interesting to subject these to proper testing. Glass fibre is a good material for helmets.
not good, once broke it can turn to knife and stick to ur head
@@cloudx7897 It is still used as it is much stronger than the cheaper plastic helmets. If correctly made it is safe.
They are fine . People who buy them , are use them for daily traffic in the city and not for some max speed , sport bike , extreme action.
seems really safe
really amazing skills and fetching income to some of unemployed youth. Hats-off to them !
Heads off to their customers also😂
Gold!
I suppose it's better than not having one at all. But I still wouldn't bet my life on wearing one of these.
y que nivel de protección ofrecen???
bastante jajajaja
This are not helmets, they are devices to keep your gray pudding in one place, so it will be easier to clean the streets...
I admire craftsmanship and ability to make things done in these conditions. But thin glassfibre shell with styrofoam is a death trap...
It’s a death trap for those workers too.
They’re working without gloves and face masks and they’re painting without any protection. They’re lucky for being still alive.
At least they are good at fiber glass body making!
They can use their skills in making light weight body kits for sports cars
Bhaiya yah kam kaun si jagah ho raha hai is kam ka karigar main bhi hun pahle main Delhi mein Karta tha
Holy shit!! I'm good I'll take my chances with the blacktop!!!
To all the haters. If the exact same helmet was done in a western country in the exact same way, you would have called it ' luxury handmade artisan helmet '
I agree with you but in the western counties they test the product and certify it from DOT regardless if the product is luxurious
Hahahahhaha
I think that you unknow the artesanal process and security certificated that need in western country.
Gayet güzel, insanlara düşük butceli ekipman ikmani tanıyorlar. Kendileride bu işi yaparken ekmek yiyorlar teşekkür ediyorum biz fakir ülkelere ürünü sunanlara
Ага, видел такие каски в продаже в середине 1990-х... Не знал, что их ещё производят, и где!!! Да в каких условиях! По сути это панамки, в которых башка раскалывается вместе с самим шлемом...
This helmets 🪖⛑️ are perfect to drive my motocross baby in my PS2 😎
Very good 👍🙏
Only to plant flowers in IT...😮..surely Not for driving a Bike...!!!! 😊
Вот оно лучшее производство на коленках, молодцы, парни. 👍
Ты купишь себе такой шлем? Ты доверишь ему свою жизнь?
@@tutengeymkovsky8365 а ты думаешь, купишь, он будет надёжнее? Я радуюсь, что люди что-то делают руками. Ценю это.
@@medvedoptica72 нахер такие поделки
@@tutengeymkovsky8365 неинтересно твоё мнение.
@@medvedoptica72 на твоё вообще насрать. Если неинтересно, хуле отвечаешь?
What a contrast just after watching Shoei factory tour lol! Pakistan in the baaag!
what matirials where they using？
Будь ласка одіньте на них распіратори. Бо через 5-10 років у них виникнють проблем у легенях. 🙏👍
Thanks for comment
Если не раньше!
Woow amazing
11:40 what is "non fedable" ?
I've watched and read ALOT of the comments here about the lack of control of building a "correct" helmet...
Well first let me tell you about myself...
One...i used to be a motorcycle cop 40 years ago and have ridden Harleys and other vintage bikes going back to the 1920's...
But yes i have too say that i most likely wouldn't use one of these helmets if i could help it ...
As a cop i saw ALOT of deaths because of improper head gear...
Like those "German" looking helmets...
One of the worse for accidents...but i guess their trying to make a statement...
Now two ...
I've also now been a cameraman for over 40 years and have been all over the world 🌎 shooting movies and shows...
But I've also been to Packistan and actually seen some of these along the roadside manufacturing shops for all sorts of things...
And its sad how they have too work...and for pennies to keep living...
I did find out that alot of these helmets are sold just locally to motorbike people...but some i sure make there way all over the world...
What i really wish...
Is if i had ALOT of money... I'd like to buy these small places the high tech correct equipment to build a really fine piece of safety equipment and where they don't have to bend over on the floor all the time...
I mean i had a couple of old Corvette's and had to redo some of the fiberglassing and even with gloves 🧤 on i got some in me...
I couldn't think how calest their hands must be to do it without gloves...
But that's just the conditions their in...
And for those of you that would say why don't i... if i have the money put a factory together in the U.S. too make helmets...
Yes i would do that...the U.S. comes first in my book and always has...
Charity begins at home i know...
But too help those who need it... wherever it is...helps...
No one has too tell me that... I'm also an ex-combat photographer like my dad was in the Navy in WWII... God love him and my mom...
But i wish I could do alot...
Third thing i didn't say is that right now I'm dealing with PTSD and cancer...so that's what I get...
Oh hopefully I'll make it through...
But this is just my thoughts on what I'd do if i could...
This is quite impressive, and I'll bet these work well.
Делают мусор из мусора
me encantan los equipos de proteccion laboral...
Молодцы!!! 👍👍👍
Well done brothers...
Yummy fiber glass particles 🤤🤤🤤
These helmets protect against the sun, because I don't know if they protect against road accidents?
Это модная строительная каска 😂
Entiendo y estoy claro que estos señores trabajan muy artesanalmente con herramientas muy rudimentarias y simples pero con mucho ingenio y esfuerzo.!!! Lo que no entiendo es por qué trabajan siempre en cuncliyas y en el suelo, para todo o casi todo lo hacen en el suelo y eso a mí parecer es más cansón y complicado.!!! Porque no usan mesas de trabajo????
Su cultura, pero dicen q esa es una buena postura para el cuerpo..todos deberían defecar en esa postura es ideal
One day India 🇮🇳 will be largest market in the world....