I know this is an old video but it sure comfirmed how I was thinking when thinking about an outfeed table on my SawStop. Thanks! Also, the wolves were very cool. Wow
I’m waiting for my 36” SS to arrive and it has a mobile base. I really like the design of your outfeed table. Very nice work. I’m wondering if you need to move the saw, will the whole thing pick up off the floor with the mobile base? Thanks
Hey, a completely random visitor here, I have a small hint for you, since I see you've decided to become a full-time youtuber. Perhaps you could consider making an ASMR type of video every now and then. You have a very fitting voice for that, deep and calm; plus ASMR generally goes well with craft. It could very well be a woodworking video, just much more narrative and maybe slightly softer- and slower-spoken. Not that it would bring you a ton of new viewers necessarily, but it might somewhat expand (with time) your viewer base. In addition to that, it could just bring you some variety and fun. Cheers!
Just ran across your video. I have had my SawStop about 6 months and need to build an extension table. Love your idea and video, just one question: Is the saw still movable on the casters? Thanks
Were the legs wrapped around a solid core? The piece on the bottom of the leg that you put the T nut in, was that just a piece of ply glued in? Plan on using your design but wanted clarification on that one point. Thanks Brother!
I have a friend outside L.V. and her Primary School children learn Metric. Someday Soon Hopefully American's will be building ( measuring ) in mm & m. All metric is, is 10's. 10, 100, 1000. It so simple.
I'm glad you made this available and that I discovered it. Been looking for how to connect an outfeed table to my Saw Stop. I did not understand what was going on beginning at 5:50-6:00. Did the board have a curve in it? Thanks.
FYI, I've followed your plan and put this on my saw. I've also referred folks to your video. Thanks for a great video and outfeed table. One difference for me is that I screwed from the bottom up when I attached it to my saw. No screws or countersink show on my surface.
This is great! I just finished making a SawStop unboxing video, and an assembly video coming out on Monday. I was thinking about making my own outfeed table, but I think mine will be shorter and "floating" off the back, since I don't want legs on mine. Your design is great too, and it's given me a few ideas for mine. Great work!
FYI, I've followed your plan and put this on my saw. I've also referred folks to your video. Thanks for a great video and outfeed table. One difference for me is that I screwed from the bottom up when I attached it to my saw. No screws or countersink show on my surface.
Nice work, that extension table will be bonus. Just a thought and perhaps you already know this little trick... when gluing two pieces together (like you did in this application) and once the glue is spread, sprinkle some table salt on it. This will prevent the two pieces from sliding away from the intended position because the salt creates grit like sand paper! Plus, it dissolves and doesn't affect anything. Thanks for posting and thumbs up for me.
Nice! Just got a new Sawstop myself and am in the process of setting it up and customizing accessories, dust collection, etc... Would like to do an extension table or outfeed/assembly table soon. And i did hear the wolves at the end. Pretty cool.
Very nice work! This extension will be very useful! The howling at the end were wolves for sure and not coyotes. We use to hear coyotes on your farm, but not this time.
Just got in the house. I used my planner all afternoon. Now I'm thinking of buying the hammer A3-41. Kind of frustrating with my little planner. On wide boards I have to remove 1/32" at a time otherwise I run out of power and breaker kicks off. Then I have to deal with the snipe. The hammer A3 41 is jointer/ planner combo. And I need a jointer. Just thinking about it for now. Expensive!!
Very nicely done, what a beautiful table. Thank you for sharing!
I know this is an old video but it sure comfirmed how I was thinking when thinking about an outfeed table on my SawStop. Thanks! Also, the wolves were very cool. Wow
PERFECT! But that floor is too pretty to get dirty. I am now thinking I need to redo my floor. Thanks a lot. :)
Beautiful work, love your attention to detail and the fine finish, thanks for sharing. Jealous of all that shop space, cheers.
I’m waiting for my 36” SS to arrive and it has a mobile base. I really like the design of your outfeed table. Very nice work. I’m wondering if you need to move the saw, will the whole thing pick up off the floor with the mobile base? Thanks
Well built outfield table, compliments for both the video and the table build. Thanks
Absolutely beautiful! Nice job
Hey, a completely random visitor here, I have a small hint for you, since I see you've decided to become a full-time youtuber. Perhaps you could consider making an ASMR type of video every now and then. You have a very fitting voice for that, deep and calm; plus ASMR generally goes well with craft. It could very well be a woodworking video, just much more narrative and maybe slightly softer- and slower-spoken. Not that it would bring you a ton of new viewers necessarily, but it might somewhat expand (with time) your viewer base. In addition to that, it could just bring you some variety and fun. Cheers!
Good idea. Will order a microphone and do voice over. Thanks!
Not a speck of dust anywhere. Is this for show?
Is this for looks, or are you going to actually use it?
Just ran across your video. I have had my SawStop about 6 months and need to build an extension table. Love your idea and video, just one question: Is the saw still movable on the casters? Thanks
Yes it is still movable. 🤗
What was used with the router to match the miter slot?
Not an extension table its an out feed table
Don't you have a paypal account for donations ? You should link one in the descriptions.
I had a patron link in the description before but nobody donated money. Eventually Patreon closed my account.
Were the legs wrapped around a solid core? The piece on the bottom of the leg that you put the T nut in, was that just a piece of ply glued in? Plan on using your design but wanted clarification on that one point. Thanks Brother!
Very nicely designed and built!
I have a friend outside L.V. and her Primary School children learn Metric. Someday Soon Hopefully American's will be building ( measuring ) in mm & m. All metric is, is 10's. 10, 100, 1000. It so simple.
I'm glad you made this available and that I discovered it. Been looking for how to connect an outfeed table to my Saw Stop. I did not understand what was going on beginning at 5:50-6:00. Did the board have a curve in it? Thanks.
Beautiful shop great project. If you need any help just give me a call and I will be there like a Bear. Great stuff. Regards Bernie - New Zealand.
FYI, I've followed your plan and put this on my saw. I've also referred folks to your video. Thanks for a great video and outfeed table.
One difference for me is that I screwed from the bottom up when I attached it to my saw. No screws or countersink show on my surface.
This is more beautiful than my dining table lol
Great job
Thank you!!
This is great! I just finished making a SawStop unboxing video, and an assembly video coming out on Monday. I was thinking about making my own outfeed table, but I think mine will be shorter and "floating" off the back, since I don't want legs on mine. Your design is great too, and it's given me a few ideas for mine. Great work!
Just beautiful!!! Self closing drawers are so satisfying!!! 👍🏽💯
Tbatz one hood looking extention.. thank you for sharing
Outstanding design and exactly what I was looking for in an out feed table for my Sawstop PCS. Thanks for posting!
Great work, looks awesome! What was the size of the whole thing?
Complimenti ottimo video ed ottimo banco da lavoro
beautiful table. nice video, Great build!!!
FYI, I've followed your plan and put this on my saw. I've also referred folks to your video. Thanks for a great video and outfeed table.
One difference for me is that I screwed from the bottom up when I attached it to my saw. No screws or countersink show on my surface.
Awesome. Glad my video helped you!
Nice work, that extension table will be bonus. Just a thought and perhaps you already know this little trick... when gluing two pieces together (like you did in this application) and once the glue is spread, sprinkle some table salt on it. This will prevent the two pieces from sliding away from the intended position because the salt creates grit like sand paper! Plus, it dissolves and doesn't affect anything. Thanks for posting and thumbs up for me.
Thank You for the trick. Now that you mention it I vaguely remember reading about this trick a while back. Cheers!
Looks great my man!
That is beautiful! Wonderful build!
Great Work! Love the design... when you built the legs was that core just a block of wood at the end or did it extend the length of the leg?
Just a block of wood
Out-Fing-Standing this is perfect.
Always great quality content, you deserve a lot more views and likes.
Belle réalisation ! Félicitations ! Vous me donnez de bonnes idées 👍
Nice! Just got a new Sawstop myself and am in the process of setting it up and customizing accessories, dust collection, etc... Would like to do an extension table or outfeed/assembly table soon. And i did hear the wolves at the end. Pretty cool.
Good luck with building the outfeed table. I think you will love you new Saw. Congratulations!
Beautiful work! Thanks for posting.
Very good work ! Thanks for sharing with us !!
Very nice work!
Nice shop.
Do you have plans for this? I would donate for them.
Sorry don’t have plans. I recently sold my SawStop and bought a felder 700S.
Very nice work! This extension will be very useful! The howling at the end were wolves for sure and not coyotes. We use to hear coyotes on your farm, but not this time.
I agree that they were wolves
Outstanding Job! I love the result as well. You are really a talented woodworker. Do you have plans for this extension table?
Thank You. Sorry I did not make plans.
Drool worthy shop
Excelllent job on extension table. I finished mine last year and can't believe how helpful it is. Nice cabinets by the way.
Thank You. Yes an extension table is almost a must.
Wow great job Gilbert 👍
Wow good
I love the final result !! This was actually a great idea and you managed to make it very clean as always, i'm impressed :)
Thank You Bryan!
you should mask the sawstop name. people need to pay you advertisement now. continue the good work!
The Samurai Carpenter paints all his makita power tools black.
@@frenchriversprings diresta and so on! You are becoming a brand yourself in a way.
Becoming a brand! I hope you are right sir. I have about six weeks left to set up my shop then will try to build special stuff.
Looks great! I’ll do the same for my saw
Awesome. You will like it!
C'est beau! I am looking forward to more shop build videos and then your project videos!
Thanks. I'l finish my cabinet and then I think I will build a Stand for my planer
@@frenchriversprings A planer stand is on my list too. I will be sure to follow along.
Just got in the house. I used my planner all afternoon. Now I'm thinking of buying the hammer A3-41. Kind of frustrating with my little planner. On wide boards I have to remove 1/32" at a time otherwise I run out of power and breaker kicks off. Then I have to deal with the snipe. The hammer A3 41 is jointer/ planner combo. And I need a jointer. Just thinking about it for now. Expensive!!
@@frenchriversprings Go for it and maybe I can take that Dewalt off your hands!
Will let you know when it's for sale. It has the helical cutterhead on it.
Excellent Work
Thank You!