Per Bendix diagnostic software, when brake pressure/load sensor is replaced for this fault a calibration procedure of brake demand sensors is required to properly turn off the warning lights. 1. Ensure air system is full (I would turn off vehicle and allow cluster to go dark before next proceeding) 2. Apply ignition power and wait 30 seconds (key on, engine off) 3. Perform a full application of the service brake and hold for 5 seconds. 4. Release the service brakes
Some times you should press the brake pedal multiple times to calibrate the sensor. Don't get discouraged. To my trucks took probably 30 times. You can do it while the engine is running butt the parking brake should be released. Good luck. Thank you for the video.
Park brake in released position. Air tank full. Truck key on with engine off. Apply full brake pressure and hold for 5-10 seconds. It should turn engine light off.
Bro, you just saved me some money on my t680 thank you
Per Bendix diagnostic software, when brake pressure/load sensor is replaced for this fault a calibration procedure of brake demand sensors is required to properly turn off the warning lights.
1. Ensure air system is full (I would turn off vehicle and allow cluster to go dark before next proceeding)
2. Apply ignition power and wait 30 seconds (key on, engine off)
3. Perform a full application of the service brake and hold for 5 seconds.
4. Release the service brakes
This
Well done , very informative. Thank you .
Thank you sir! Glad I could help!
Some times you should press the brake pedal multiple times to calibrate the sensor. Don't get discouraged. To my trucks took probably 30 times. You can do it while the engine is running butt the parking brake should be released.
Good luck.
Thank you for the video.
Park brake in released position. Air tank full. Truck key on with engine off.
Apply full brake pressure and hold for 5-10 seconds. It should turn engine light off.
Good job
Great job 👏🏻
Do you have the sensor code from volvo?
Thanks man!
Did the air pressure read beforehand ?
I did all as you said but for me the lights didn’t gone please advice
Same problem…
Where is this location?
135 89 2 code
You forgot to mention. Air had to be drain. You'll never gonna get that sensor with 120psi.
No pressure on the sensor unless you press the brake pedal.
Умена такая-же проблема все дачики горят трак ни ездить проблема в чëм можете сказать
Если бы этот дачик не работает трак ниможет ехать